Acute Gelsemium poisoning is a systemic disease primarily affecting the central nervous system and respiratory symptoms caused by the ingestion of a substantial amount of Gelsemium within a short period. It manifests as sudden onset and rapid progression, primarily caused by accidental ingestion due to misidentification, and posing significant health risks. The compilation of the Technical Plan for Emergency Health Response to Acute Gelsemium Poisoning describes in detail the specialized practice and technical requirements in the process of handling acute Gelsemium poisoning, including accident investigation and management, laboratory testing and identification, in-hospital treatment, and health monitoring. The guidelines clarify key procedures and requirements such as personal protection, investigation elements, etiology determination, medical rescue, and health education. The key to acute Gelsemium poisoning investigation lies in promptly identifying the toxin through exposure history, clinical manifestations, and sample testing. Because there is no specific antidote for Gelsemium poisoning, immediate removal from exposure, rapid elimination of the toxin, and respiratory monitoring are critical on-site rescue measures. Visual identification of food or herbal materials, followed by laboratory testing to determine Gelsemium alkaloids in samples is a rapid effective screening method. These guidelines offer a scientific, objective, and practical framework to support effective emergency responses to acute Gelsemium poisoning incidences.

Objective:To evaluate the effect of preemptive analgesia with ibuprofen on postoperative pain following single posterior tooth implantation, aiming to provide a clinical reference for its application.Methods:A multicenter, randomized, double-blind, placebo-controlled parallel-group trial was conducted. A total of 82 participants were included in the trial, meeting the eligibility criteria from April 2022 to April 2024 at the Capital Medical University School of Stomatology (40 cases), Beijing TianTan Hospital, Capital Medical University (22 cases), Beijing Chao-Yang Hospital, Capital Medical University (20 cases). Participants were randomly assigned in a 1∶1 ratio to either the ibuprofen group or the control group, with each group comprising 41 individuals. Participants in the ibuprofen group received 300 mg of sustained-release ibuprofen capsules orally 15 min before surgery, while the control group received a placebo. Both groups received the same postoperative analgesic regimen for 3 days. Pain scores were assessed using the numerical rating scale at 30 min, 4 h, 6 h, 8 h, 24 h, 48 h, and 72 h postoperatively, and the additional use of analgesic medication was recorded from days 4 to 6 postoperatively.Results:A total of 82 participants were initially enrolled in the study, with 7 dropouts (4 from the control group and 3 from the ibuprofen group), resulting in 75 participants (37 in the control group and 38 in the ibuprofen group) completing the trial. There were no reports of adverse events such as nausea or vomiting among the participants. The ibuprofen group exhibited significantly lower pain scores at 4 h, 6 h and 8 h [1.0 (0.0, 2.0), 1.0 (0.0, 2.0), 1.5 (0.0, 3.0) ] postoperatively compared to the control group 4 h, 6 h and 8 h [2.0 (1.0, 3.0), 3.0 (1.5, 4.0), 2.0 (1.0, 4.0)] ( Z=-1.99, P=0.047; Z=-3.01, P=0.003; Z=-2.10, P=0.036). The proportions of patients requiring additional analgesic medication between days 4 and 6 post-surgery were 18.4% (7/38) in the ibuprofen group and 27.0% (10/37) in the control group, with no significant difference (χ 2=0.79, P=0.373). The median additional medication usage postoperatively was [0.0 (0.0, 0.0) pills] in the ibuprofen group and [0.0 (0.0, 1.0) pills] in the control group, with no significant difference ( Z=-0.78, P=0.439). Conclusions:Preemptive analgesia with ibuprofen effectively reduces postoperative pain following tooth implantation, representing a safe and effective perioperative pain management strategy.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective To analyze coating properties of porous artificial joints,including coating morphology and coating mechanical properties,and summarize the range of coating properties of current mainstream products,to provide references for the design and development of new products,as well as provide the basis for the long-term implant removal analysis.Methods Samples for the surface morphology,shear strength,and tensile strength of the coatings used in the experiment were prepared in accordance with ASTM F1854,ASTM F1044,and ASTM F1 147 standards,respectively.The coatings were processed using plasma spraying.The surface morphology(coating thickness,porosity,and pore intercept)of the coatings for all 17 products(Nos.1-17)was tested;for products Nos.1-7 and Nos.15-16,the shear strength test between the coating and substrate was conducted first in accordance with the test method of ASTM F1044.Then,according to the test method of ASTM F1 147,the tensile strength test between the coating and substrate was conducted.For product No.17,the shear and tensile strengths of the composite coating and simple titanium coating were tested,respectively,according to the test method of ASTM F1044 and ASTM F1 147.Results A total of 15 products(88.2％)had coating thicknesses between 300 μm and 500 μm.There were 16 metal-coated products(Nos.1-16),of which 11(68.75％of the total)had coating porosities between 30％and 50％,and 14(87.5％of the total)had coating pore intercepts between 50 μm and 150 μm.The mechanical properties of the coatings were independent of the substrate material used.The shear and tensile strengths of the composite coatings with hydroxyaptite(HA)were significantly lower than those of the pure metal coatings.Conclusions For the design and manufacture of artificial joints with porous coatings,the performance of the coating can be referred to the following indexes:the coating thickness is 300-500 μm,the coating porosity is 30％-50％,the coating pore intercept is 50-150 μm.The substrate materials can be selected based on the use of the product.The effects of a lower bonding force on product performance should be considered when designing prostheses with composite coatings containing HA.This range of performance metrics provides control for long-term clinical extraction analyses.

Endodontic diseases are a kind of chronic infectious oral disease.Common endodontic treatment concepts are based on the removal of inflamed or necrotic pulp tissue and the replacement by gutta-percha.However,it is very essential for endodontic treatment to debride the root canal system and prevent the root canal system from bacterial reinfection after root canal therapy(RCT).Recent research,encompassing bacterial etiology and advanced imaging techniques,contributes to our understanding of the root canal system's anatomy intricacies and the technique sensitivity of RCT.Success in RCT hinges on factors like patients,infection severity,root canal anatomy,and treatment techniques.Therefore,improving disease management is a key issue to combat endodontic diseases and cure periapical lesions.The clinical difficulty assessment system of RCT is established based on patient conditions,tooth conditions,root canal configuration,and root canal needing retreatment,and emphasizes pre-treatment risk assessment for optimal outcomes.The findings suggest that the presence of risk factors may correlate with the challenge of achieving the high standard required for RCT.These insights contribute not only to improve education but also aid practitioners in treatment planning and referral decision-making within the field of endodontics.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Patients with severe trauma require an extremely timely treatment and transfusion plays an irreplaceable role in the emergency treatment of such patients. An increasing number of evidence-based medicinal evidences and clinical practices suggest that patients with severe traumatic bleeding benefit from early transfusion of low-titer group O whole blood or hemostatic resuscitation with red blood cells, plasma and platelet of a balanced ratio. However, the current domestic mode of blood supply cannot fully meet the requirements of timely and effective blood transfusion for emergency treatment of patients with severe trauma in clinical practice. In order to solve the key problems in blood supply and blood transfusion strategies for emergency treatment of severe trauma, Branch of Clinical Transfusion Medicine of Chinese Medical Association, Group for Trauma Emergency Care and Multiple Injuries of Trauma Branch of Chinese Medical Association, Young Scholar Group of Disaster Medicine Branch of Chinese Medical Association organized domestic experts of blood transfusion medicine and trauma treatment to jointly formulate Chinese expert consensus on blood support mode and blood transfusion strategies for emergency treatment of severe trauma patients ( version 2024). Based on the evidence-based medical evidence and Delphi method of expert consultation and voting, 10 recommendations were put forward from two aspects of blood support mode and transfusion strategies, aiming to provide a reference for transfusion resuscitation in the emergency treatment of severe trauma and further improve the success rate of treatment of patients with severe trauma.

Objective: To analyze the incidence of preterm birth based on pre-pregnancy body mass index (BMI) stratification and explore the associated factors of preterm birth among pregnant women at different BMI stratifications. Methods: From February 2018 to December 2020, pregnant women who participated in China Birth Cohort Study (CBCS) and gave birth at Beijing Obstetrics and Gynecology Hospital were enrolled as the study subjects. Electronic Data Capture System and standard structured questionnaires were used to collect data related to pre-pregnancy, pregnancy, and delivery for pregnant women. Pregnant women were divided into the low-weight group, normal-weight group and overweight group based on their pre-pregnancy BMI. A Cox proportional hazards model was used to analyze the associated factors of preterm birth among pregnant women with different BMI before pregnancy. Results: A total of 27 195 singleton pregnant women were included, with a preterm birth rate of 5.08% (1 381/27 195). The preterm birth rates in the low-weight group, normal-weight group and overweight group were 4.29% (138/3 219), 4.63% (852/18 390) and 7.00% (391/5 586) respectively (P<0.001). After adjusting for relevant factors, the Cox proportional hazards model showed that the risk of preterm birth in the overweight group was 1.457 times higher than that in the normal-weight group (95%CI: 1.292-1.643). Preeclampsia-eclampsia (HR=2.701, 95%CI: 1.318-5.537) was the associated factor for preterm birth in the low-weight group. Advanced maternal age (HR=1.232, 95%CI: 1.054-1.441), history of preterm birth (HR=4.647, 95%CI: 3.314-6.515), vaginal bleeding in early pregnancy (HR=1.613, 95%CI: 1.380-1.884), and preeclampsia-eclampsia (HR=3.553, 95%CI: 2.866-4.404) were associated factors for preterm birth in the normal-weight group. Advanced maternal age (HR=1.473, 95%CI: 1.193-1.818), history of preterm birth (HR=3.209, 95%CI: 1.960-5.253), vaginal bleeding in early pregnancy (HR=1.636, 95%CI: 1.301-2.058), preeclampsia-eclampsia (HR=2.873, 95%CI:2.265-3.643), and pre-gestational diabetes mellitus (HR=1.867, 95%CI: 1.283-2.717) were associated factors for preterm birth in the overweight group. Conclusion: Pre-pregnancy overweight is an associated factor for preterm birth, and there are significant differences in the associated factors of preterm birth among pregnant women with different BMI before pregnancy.
Pregnancy ; Infant, Newborn ; Female ; Humans ; Body Mass Index ; Overweight/epidemiology* ; Premature Birth/epidemiology* ; Pre-Eclampsia/epidemiology* ; Cohort Studies ; Eclampsia ; Incidence ; Risk Factors ; Thinness/epidemiology*

Objective: To explore the association between coagulation function indicators and placental abruption (PA) in different trimesters of pregnancy among preeclampsia-eclampsia pregnant women. Methods: From February 2018 to December 2020, pregnant women who participated in the China birth cohort study and were diagnosed with preeclampsia, eclampsia and chronic hypertension with superimposed preeclampsia in Beijing Obstetrics and Gynecology Hospital were enrolled in this study. The baseline and follow-up information were collected by questionnaire survey, and the coagulation function indicators in the first and third trimesters were obtained through medical records. The Cox proportional hazards model was used to analyze the association between the coagulation function indicators and PA. A restrictive cubic spline curve was used to draw the dose-response curve between the relevant coagulation function indicators and PA. Results: A total of 1 340 participants were included in this study. The age was (32.50±4.24) and the incidence of PA was 4.4% (59/1 340). After adjusting for relevant factors, Cox proportional hazards model showed that compared with the high-level classification of fibrinogen (FIB), participants within the middle-(HR=3.28, 95%CI: 1.27-8.48) and low-level (HR=3.84, 95%CI: 1.40-10.53) classification during the first trimester and within the low-level classification (HR=4.18, 95%CI: 1.68-10.39) during the third trimester were more likely to experience PA. Compared with the middle-level classification of pro-thrombin time (PT), the risk of PA in the participants within the low-level classification (HR=2.67, 95%CI: 1.48-4.82) was significantly higher in the third trimester. The restrictive cubic spline analysis showed a linear negative association between FIB and PA in the first and third trimesters, while PT and PA showed an approximately L-shaped association . Conclusion: Among pregnant women diagnosed with preeclampsia-eclampsia, the middle-and low-level classification of FIB in the first and third trimesters and the low-level classification of PT in the third trimester could increase the risk of PA.
Pregnancy ; Female ; Humans ; Pre-Eclampsia/diagnosis* ; Abruptio Placentae/epidemiology* ; Pregnant Women ; Eclampsia ; Cohort Studies ; Placenta

Humans ; Factor XIII/genetics* ; Factor XIII Deficiency/genetics* ; Mutation ; Pedigree