Immune checkpoint inhibitors (ICIs) have demonstrated unparalleled clinical responses and revolutionized the paradigm of tumor treatment, while substantial patients remain unresponsive or develop resistance to ICIs as a single agent, which is traceable to cellular metabolic dysfunction. Although dysregulated metabolism has long been adjudged as a hallmark of tumor, it is now increasingly accepted that metabolic reprogramming is not exclusive to tumor cells but is also characteristic of immunocytes. Correspondingly, people used to pay more attention to the effect of tumor cell metabolism on immunocytes, but in practice immunocytes interact intimately with their own metabolic function in a way that has never been realized before during their activation and differentiation, which opens up a whole new frontier called immunometabolism. The metabolic intervention for tumor-infiltrating immunocytes could offer fresh opportunities to break the resistance and ameliorate existing ICI immunotherapy, whose crux might be to ascertain synergistic combinations of metabolic intervention with ICIs to reap synergic benefits and facilitate an adjusted anti-tumor immune response. Herein, we elaborate potential mechanisms underlying immunotherapy resistance from a novel dimension of metabolic reprogramming in diverse tumor-infiltrating immunocytes, and related metabolic intervention in the hope of offering a reference for targeting metabolic vulnerabilities to circumvent immunotherapeutic resistance.
Humans ; Neoplasms/pathology* ; Immunotherapy/methods* ; Immune Checkpoint Inhibitors/therapeutic use*

Objective:To summarize the preliminary clinical experience of utilizing ureteral balloon dilation catheter in the treatment of "difficult ureter" during ureteroscopic lithotripsy, and to discuss the efficacy and safety of the technique.Methods:Clinical data of 28 patients (30 sides) with upper urinary tract calculi admitted to Beijing Tsinghua Changgung Hospital Affiliated to Tsinghua University from April 2021 to July 2022 were retrospectively analyzed. There were 23 males (82.1%) and 5 females (17.9%), with age of (51.5±13.6) years. Among the 30 sides, 20 (66.7%) on the left and 10(33.3%) were on the right. Calculi were either located in the renal pelvis or calyxes in 7 sides (23.3%), upper ureter in 17 sides (56.7%), and lower ureter in 6 sides (20.0%). The maximum diameter of the stones was (9.4±4.2)mm, and 23 sides (76.7%) were combined with hydronephrosis before surgery. When "difficult ureter" was encountered during the procedure, that is, it was difficult to insert ureteroscope or ureteral access sheath (UAS) due to small ureteral lumen, balloon catheter was used for dilation in the first stage, in which the balloon diameter was 4 mm on 22 sides and 5mm on 8 sides. The instrument was retrogradely inserted through the working channel of F8 semi-rigid ureteroscope, and the small site of the ureteral lumen was dilated under direct endoscopic view. After a single dilation, the balloon catheter was withdrawn, and the effect of dilation was evaluated by semi-rigid ureteroscopy to determine whether to proceed with the following procedures. The intraoperative data were recorded, including surgical method, stage of "difficult ureter" occurred, site of the small part of the ureter, related data of utilizing ureteral dilatation balloon catheter, grade of ureteral injury after dilatation (according to the 0-4 grading classification of endoscopic ureteral injuries), total operation time, balloon catheter-related adverse events, stone-free rate, and time of removing ureteral stents.Results:Among the 30 sides, 29 (96.7%) had difficulty in the stage of ureteroscope insertion, and 1(3.3%) had difficulty in the stage of UAS insertion. A total of 37 small sites of ureter were involved, including 18 in the intramural segment, 10 in the lower part, 2 in the middle part, and 7 in the upper part. Each site was dilated once with a median time of 3 (0.5, 5.0) minutes and a median maximum balloon pressure of 1 215.9(1 215.9, 1 443.9)kPa[12.0(12.0, 14.3)atm]. There were 28 sites of grade Ⅰ injury, 8 sites of grade Ⅱinjury, and 1 site of grade Ⅲinjury. The total duration of unilateral procedure was (73.4±30.3) min. Ureteroscope or UAS insertion was successful in 28 sides(93.3%) after balloon dilation, and failed in 2 sides(6.7%), both of which were in the stage of inserting ureteroscope and ureteral stent was indwelled for the second-stage procedures. On the first day after surgery, the hemoglobin level was (134.1±12.9)g/L, which was significantly different from the preoperative parameters ( P<0.01), and serum creatinine level was (86.7±23.2)μmol/L, which showed no significant difference from the preoperative one ( P=0.263). The primary stone-free rate was 92.9% (26/28), and the total postoperative complication rate was 13.3% (4/30), including 3 of grade Ⅰ (lateral lower abdominal pain requiring additional analgesic drugs) and 1 of grade Ⅱ (postoperative hematuria requiring intravenous hemostatic drugs). Follow-up was conducted for 3 months. All of the 28 successful sides had their ureteral stents removed before the last follow-up, and the time of removal was (36.9±11.5) days. No hydronephrosis was found in the ipsilateral kidney by ultrasound 3 months after operation. Conclusions:Balloon dilation technique showed good efficacy and safety in the treatment of "difficult ureter" during ureteroscopic lithotripsy.

Objective:To retrospectively summarize disease characteristics and the clinical experience of minimally invasive endoscopy in the treatment of upper urinary tract obstruction caused by ureteropelvic encrusted inflammatory disease.Methods:Three patients with bilateral ureteropelvic encrusted inflammatory disease admitted to our hospital from March 2018 to July 2021 were involved. Case 1, male, 45 years old, admitted due to bilateral hydronephrosis for 5 months. The preoperative diagnosis were bilateral ureteropelvic stones (encrustation), right ureteral atresia, left ureteral stenosis, and systemic vasculitis. Left double J tube insertion and right nephrostomy were performed in another hospital. We conducted antegrade percutaneous nephroscopy combined with retrograde ureteroscopy surgery and assisted balloon dilation to treat bilateral lesions stage by stage. Case 2, Male, 12 years old, admitted due to bilateral abdominal pain for 6 weeks. The preoperative diagnosis were bilateral ureteral stones, bilateral hydronephrosis, and dermatomyositis. After the failure of double J tube insertion in another hospital, double nephrostomy was performed instead. We performed left percutaneous nephroscopy and right percutaneous nephroscopy combined with ureteroscopy for the treatment of bilateral lesions. Case 3, female, 32 years old, was admitted because of pain in the left lower back and abdomen for over 6 months. The preoperative diagnosis were bilateral ureteral stones, bilateral ureteral stenosis, and dermatomyositis. She underwent three times of ESWL and once URS before. We performed ureteroscopic surgery for bilateral lesions. During the surgery, various degrees of crusting in the renal pelvis or ureter were observed in all 3 cases, and the lesions were removed using pneumatic lithotripsy combined with forceps or baskets. After surgery, oral antibiotics were continuously used for 1-3 months. The efficacy and prognosis were evaluated based on the follow-up of urine, imaging, and endoscopic examinations at 3, 6, and 12 months after surgery.Results:All 3 surgeries were successfully completed. At 3, 6, and 12 months after surgery, follow-up CT showed no crusting in the left ureter, and endoscopy showed good mucosal wound healing and unobstructed lumen in case 1. There were still some crusting lesions and lumen stenosis in the right renal pelvis, and the right ureter reconstruction surgery was ultimately performed. There were no crusting on both sides and the urinary tract was unobstructed after 3, 6, and 12 months of follow-up in case 2 and case 3. Postoperative pathological examination showed chronic inflammation of urothelial mucosal tissue, small pieces of proliferative fibrous tissue with peripheral calcification. Calcification layer composition analysis showed magnesium ammonium phosphate and carbonate apatite. No related complications occurred in case 2 and case 3.Conclusions:Urothelial crusted inflammatory disease is rare clinically, and the diagnosis and treatment strategies are rarely reported domestically and internationally. Preoperative imaging examination, intraoperative findings and postoperative pathology or calcification composition analysis are of instruction for the diagnosis and treatment of this disease. Minimally invasive endoscopy treatment for upper urinary tract obstruction caused by ureteropelvic encrusted inflammatory disease has a good effect. Long-term efficacy and other adjuvant treatment need long-term follow-up and clinical practice.

Objective:To investigate the clinical significance of a new classification system for atlas fractures based on pre- and post-treatment CT features, with a focus on diagnosis and treatment.Methods:A retrospective analysis was conducted on 75 cases of cervical vertebra fractures treated at the Sixth Hospital of Ningbo City between January 2015 and December 2020. The study included 44 males and 31 females, with an average age of 53.3±13.0 years (range: 27-81 years). The fractures were classified according to the Landells classification, resulting in 12 cases of type I, 13 cases of type II, 33 cases of type III, 9 cases that were difficult to classify due to fracture lines located at anatomical junctions, and 8 cases that could not be classified using the Landells classification due to diverse injury mechanisms. To establish a new preliminary classification for cervical vertebra fractures, the researchers considered whether the fracture line in the CT images involved the facet joint surface of the atlas, the impact on bilateral half-rings, and the displacement distance of the fracture ends. Five spinal surgeons were randomly selected to classify the CT images of the 75 patients using the new classification method. After one month, the imaging data of the 75 cases of cervical vertebra fractures were randomized and reclassified to assess the reliability and repeatability of the classification.Results:The new cervical vertebra fracture classification method comprised three types based on whether the fracture line involved the facet joint surface of the atlas: type A (no involvement of the facet joint surface of the atlas), type B (involvement of one side of the facet joint surface with intact contralateral half-ring), and type C (involvement of one side of the facet joint surface with fractured contralateral half-ring). Additionally, based on the maximum displacement distance between the fracture ends (>4 mm), six subtypes were identified: subtype 1 (≤4 mm displacement) and subtype 2 (>4 mm displacement). Consequently, the subtypes were classified as A1, A2, B1, B2, C1, and C2. According to the new classification method, the 75 patients included 17 cases of A1, 12 cases of A2, 7 cases of B1, 13 cases of B2, 12 cases of C1, and 14 cases of C2. The classification demonstrated excellent consistency, as assessed by the five doctors, with Kappa values of 0.85 and 0.91 for reliability and repeatability, respectively. At the final follow-up, all conservatively treated patients achieved bone healing, while four surgically treated patients experienced non-union of the fracture ends but exhibited good fusion between the atlas and axis. The remaining surgically treated patients achieved bony union without complications such as loosening or fracture of internal fixation.Conclusion:The new cervical vertebra fracture classification method, based on CT imaging features, comprehensively covers common clinical cases of cervical vertebra fractures and demonstrates excellent consistency. It provides valuable clinical guidance for the diagnosis and treatment of cervical vertebra fractures.

Objective:To investigate the anatomical safety and feasibility ofposterior occipitocervical fixation with atlan-tooccipital-clivus screw.Methods:Data of 60 patients who treated in the spinal department of our hospital with upper cervical computed tomographic scans from February 2017 to November 2019 were retrospectively collected. Occipitocervical infection, injury, tumor and deformity were excluded. The Mimics software was used to reconstruct the occiput, atlas and measure the anatomical parameters, including the height and width of the anterior edge of the clivus, the height and width of the middle part of the clivus, the thinnest distance of the soft tissue in front of the clivus, the anteroposterior diameter, transverse diameter, the angle of inside tilting in coronary plane of the occipital condyle, the distance from the hypoglossal canal to the atlantooccipital articular surface, the anteroposterior diameter and transverse diameter of the superior joint of atlas, the height of the lateral mass, and the height and transverse diameter of the inferior articular process of the superior atlas joint. The three-dimensional digital modeling was performed and the screw diameter of 3.5mm was simulated. 3-Matic software were used to measure the screw placement parameters, including the inside tilting angle in coronary plane of screw, and the angle of upper tilting in sagittal plane and length of screw. The atlanto-occipital junction was exposed at the rear of 8 cadavers. According to the above parameters, the titanium alloy screws with a diameter of 3.5 mm were transferred from the inferior articular process and posterior arch of the atlas to the clivus through the atlantooccipital. Finally, the screw path was cut along the nail path with a pendulum saw, and the track of the screw was observed to confirm the safety and effectiveness of the screw.Results:The leading edge height and width of male clivus was 16.8±2.5 mm and 20.1±3.1 mm. The middle part of the clivus was 9.7±2.3 mm and 22.4±3.7 mm. The thinnest soft tissue in front of the clivus was 5.8±1.48 mm. The anteroposterior diameter of the occipital condyle was 19.1±1.9 mm, the transverse diameter was 12.6±2.0 mm, the inside tilting angle was 33.7°±4.5°, and the vertical distance from the lowest point of the neural tube to the articular surface of the occipital condyle was 9.6±1.1 mm. The height of the lateral mass of atlas was 12.9±2.4 mm, the anteroposterior diameter of the upper joint of atlas was 21.7±1.9 mm, and the transverse diameter was 11.7±1.4 mm. The width of the inferior facet was 14.9±1.4 mm and the height of the inferior facet was 5.7±0.85 mm. The distance from the screw entry point to the vertical line of the lateral mass migration midpoint was 2.5±0.6 mm; The distance from the screw entry point to the horizontal line of the midpoint was 2.3±0.7 mm.The inside titling angle of screw was 18.4°±1.6°, the upper tilting angle was 55.6°±3.1°, the length of the screw track was 53.0±2.8 mm, the adjustment range of upper tilting angle was 15.0±2.8 mm, the adjustment range of inside tilting angle was 10.4±2.4 mm. The anatomical parameters of females were slightly smaller than those of males, and the difference was statistically significant, but there was no significant difference between left and right parameters. The screws of 8 specimens could be inserted safely and effectively.Conclusion:Atlan-tooccipital-clivus screw can be implanted without damaging the nerve and vascular structure, and it can be used as a choice for occipitocervical fixation.

Objective:To introduce the preliminary experience of domestic disposable digital flexible ureteroscope (ZebraScope?)in the treatment of upper urinary calculi.Methods:The clinical data of 16 patients with upper urinary calculi treated by ZebraScope? in our hospital from February to March 2020 were retrospectively analyzed. The scope is composed of a handle and shaft, the image can be transferred through the transmission line at the end of the handle. There were 10 males and 6 females. The mean age was 42.1 years (26-63 years). 12 cases of upper ureteral calculi and 4 cases of renal calculi included. Mean diameter was 1.3cm (0.8-2.1cm). Ureteral stents were preoperatively placed in 4 patients and no pre-stent were in 12 patients. Two patients had a history of endoscopic lithotripsy. The ureteral sheath was used in 4 patients with F12/14, 10 patients with F11/13, and 2 patients with F10/12. Eight patients were treated with a stone basket. Intra-operative lithotripsy was performed using 200um optical fiber combined with holmium laser, and 6Fr ureteral stent was routinely indwelling for 2-4 weeks. The operation time, postoperative complications, hospital-in time, stone clearance rate and other related parameters were summarized and analyzed.Results:Of the 16 patients, 14 succeed and 2 patients failed and secondary operation was applied due to poor ureteral condition. The mean operative time was 55.6 minutes (32-115 minutes). The average laser emission time was 25.2 minutes (10-65 minutes). There was no image degradation and scope damage during the operation. All the patients recovered well after the operation, and no postoperative complications such as fever and pain occurred. Two patients received external physical vibration lithecbole therapy. The average hospital-in time was 1.2 days (1-3 days). One month after the operation, the calculi clearance rate was 87.5% (14/16).Conclusion:Our preliminary study found that ZebraScope? could be safe and effective in the treatment of upper urinary calculi less than 2 cm. Futhter verification is required in larger renal stones.

Objective:To evaluate the risk of infectious complication after endoscopic surgery for the treatment of upper urinary tract calculi combined with carbapenem-resistant Enterobacteriaceae (CRE) bacteriuria.Methods:The clinical data of 14 patients who were diagnosed with upper urinary tract calculi combined with CRE bacteriuria and treated in Tsinghua University affiliated Beijing Tsinghua Changgung Hospital from January 2015 to December 2019 were analyzed retrospectively. There were 7 males and 7 females, aged from 34 to 71 years old (mean 58.2 years old). The diagnosis was confirmed by ultrasonography, CT or abdominal X-ray. Fourteen cases underwent 15 procedures, including 4 RIRS and 11 PCNL. One patient underwent 2 PCNL procedures at an interval of 1 week, and 1 patient underwent PCNL 16 days after nephrostomy. There were 13 cases of renal calculi and 1 case of upper ureteral calculi. Stones were found on the left side in 8 cases and the right side in 6 cases. There were 3 cases of solitary stone, 4 cases of multiple stones and 7 cases of staghorn stone. The maximum diameter of stones was (31.5±10.2)mm in patients who underwent PCNL, and(10.8±2.6)mm in patients undergoing RIRS. The complete blood count, blood biochemistry, procalcitonin and C-reactive protein were tested postoperatively on the same day of the procedure and 1 day after the procedure. Abdominal X-ray was performed 1-2 days postoperatively, and the ureteral stent (double J) was removed 4 weeks after the procedure. Fourteen patients with CRE bacteriuria underwent 15 endoscopic procedures. Urine culture identified 7 cases of Escherichia coli, 6 cases of Klebsiella pneumoniae and 1 case of Enterobacter cloacae. Preoperative blood culture was performed in 3 cases, of which 1 case was negative and 1 case was Klebsiella pneumoniae positive. Before operation, 11 cases were empirical treated with broad-spectrum antibiotics, including monotherapy in 10 cases and drug combination therapy in 1 case. Sensitive antibiotics against CRE were prescribed in 4 cases preoperatively, including monotherapy in 2 cases and drug combination therapy in 2 cases. Antibiotics were used preoperatively for 1-24 days (mean 7.1 days).Results:After the operation, 7 cases received monotherapy with broad-spectrum antibiotics. Sensitive antibiotics against CRE were prescribed in 4 cases postoperatively, including monotherapy in 4 cases and drug combination in therapy 4 cases. Postoperative antibiotics were used for 2-17 days (mean 6.8 days). There were 3 cases of systemic inflammatory response syndrome (SIRS) after operation, and there were no cases of sepsis, septic shock or death. The main components of stones were ammonium magnesium phosphate hexahydrate in 8 patients and calcium oxalate monohydrate in 6 patients.Conclusions:Effective measures can be taken to reduce or avoid bacteremia caused by CRE, reducing mortality and the use of antibiotics. Endoscopic surgery can be performed only after the clinical symptoms and laboratory tests have significantly improved. Patients with fever and other clinical symptoms and abnormal infectious markers should be treated with targeted antimicrobial therapy.

Objective: To summarize our preliminary clinical experience of ultrasound-guided needle-perc combined with standard percutaneous nephrolithotomy (PCNL) in the treatment of staghorn stones, and to analyze its safety and efficacy. Methods: The clinical data of 65 patients with staghorn stones treated by ultrasound-guided needle-perc combined with standard PCNL under general anesthesia with the patient in prone position from December 2017 to June 2019 were retrospectively reviewed. A total of 41 males and 24 females were included. The mean age was (53.5+ 8.9) years. The mean body mass index (BMI) was (25.1±2.9) kg/m², and the mean stone diameter was (10.9±3.1) cm. Among them, there were 3 cases with bilateral staghorn stones, 38 cases with complete staghorn calculi, 36 cases with non- or mild preoperative hydronephrosis, 12 cases with previous ipsilateral renal surgery, and 9 cases with solitary kidneys. Ultrasound-guided renal access and tract dilation were used to establish F24 standard channel. Pneumatic combined with ultrasonic lithotripsy with suction system was used to treat staghorn stones under nephroscope. Needle-perc consists of F4.2 needle-like metal sheath connected with a three-way tube. A 0.6 mm diameter video fiber, 200 um holmium laser fiber and liquid perfusion device can be connected through the three-way tube respectively. The residual stone in the parallel calyx after standard PCNL were punctured by needle-perc under ultrasound guidance, and then the holmium laser fiber was used for lithotripsy. Results: In this study, a total of 68 renal units were included. The median operative time was 79.8 minutes, ranging 45-129 minutes. The median decrease of hemoglobin on postoperative day 1 was 10.6 g/L, ranging 0-25.9 g/L. The median length of postoperative hospital stay was 5.5 days, ranging 4-7 days and the median time of tract establishment was 4.8 minutes, ranging 2.5-9.6 minutes. The median number of standard tract established was 1.5, ranging 1-3 and the median number of needle-perc punctured was 1.0, ranging 1-3. The total complication rate was 10.3% (7 cases), including 5 cases of Clavien grade Ⅰ, 2 cases of postoperative fever, 3 cases of analgesic use. There were 2 cases of Clavien grade Ⅱ. All of them were blood transfusion. The initial stone free rate was 79.4%(54/68). Of the 14 patients with residual stones, 9 patients underwent second-stage operation, 7 patients were stone free, and the final stone free rate was 89.7%(61/68). Conclusions Ultrasound-guided needle-perc combined with standard PCNL is safe and effective in the treatment of staghorn stone.

Objective:To investigate the safety of posterior atlantoaxial transarticular screw combined with atlas pedicle screw fixation in Chinese.Methods:CT data of upper cervical spine in 48 patients were collected from Ningbo No.6 Hospital, including 26 males and 22 females aged 26-58 years [(37.3±13.5)years]. All CT data was transformed into 3D dimensional model and inserted with virtual screws by Mimics 19.0. Firstly, the vertical plane P 1 and the horizontal plane P 2 of the atlas were built in those atlantoaxial models, secondly the atlantoaxial transarticular screw S 0 was inserted by Margel method, and it's insertion point was located at 3 mm lateral and 2 mm cephalad in the C 2 inferior articular process. Finally, four atlas pedicle screws were inserted at the midline of atlas lateral mass. The four screws are inserted as follows. S 1: the screw was tangent to the lateral side of the S 0 or the medial of the atlas pedicle. S 2: the screw was tangent to the lateral wall of the atlas pedicle. S 3: the screw was tangent to the upper wall of the atlas pedicle. S 4: the screw was tangent to the inferior wall of the atlas pedicle. The angles between S 1, S 2 and P 1 as the camber angle, and the angle between S 3, S 4 and P 2 as the gantry angle were measured. Then the safety range of camber angle and gantry angle were calculated, and the screw length of S 1, S 2, S 3 and S 4 was measured. In all models, the camber angle and gantry angle of the screws were adjusted an interval of 2°, the number of successful cases was calculated and the success rate of insertion was calculated. Results:All 3D models were inserted successfully. The minimum value, maximum value and safety range of the camber angle of atlas pedicle screws were (-6.7±5.2)°, (10.4± 4.3)°, (17.1±3.7)°, respectively; and of the gantry angle were (-0.5±3.5)°, (11.0±5.8)°, (11.5±4.9)°, respectively. The length of screw placement was S 1: (31.1±2.4)mm, S 2: (28.3±2.5)mm, S 3: (29.2±3.8)mm, S 4: (29.6±3.0)mm, respectively ( P<0.05). When the camber angle was from -1°to 5°, the success rate of screw placement was 87.5%; when inserting with 2° camber angle, the success rate was 100%; when the gantry angle was 5°, the success rate was 93.8%. Conclusion:The posterior atlantoaxial transarticular screw combined with atlas pedicle screw can achieve satisfy insertion length and success rate.

Objective: To investigate the accuracy and feasibility of individual 3D printing model for pedicle screw placement in treating patients with upper cervical spine fracture. Methods: A retrospective case control study was conducted to analyze the clinical data of 30 patients with upper cervical spine fracture admitted to Ningbo No.6 Hospital from August 2013 to December 2018. There were 19 males and 11 females, aged 45-67 years with an average age of 53.5 years. The 15 patients in the study group were treated with pedicle screw fixation and another 15 patients in the control group were treated with traditional freehand screw fixation. A total of 120 pedicle screws were implanted, with 60 screws in each group. The operation time, intraoperative blood loss, preoperative and postoperative visual analogue score (VAS), Japan Orthopedic Association (JOA) score were recorded. The position and grade of screws were evaluated according to Kawaguchi's evaluation method of screw grade after operation. The patients took monthly reexamination for the first three months after discharge. In the first two months after discharge, the patients took X-ray examination for observation of screw loosening or rupture of internal fixation. At the third month after operation, the patients took CT of cervical spine for observation of bone healing and fusion. Results: The mean follow-up duration was 17.8 months (range, 13-21 months). The study group had shorter operation time (99.13±3.04)minutes compared with the control group (107.00±6.92) minutes (P<0.01). There were no significant differences in intraoperative blood loss, preoperative VAS, JOA scores before operation and 1 year after operation between the two groups (P>0.05), but the VAS in study group was significantly lower than that in control group (P<0.05). In the study group, the VAS score 1 year after operation [(2.3±0.5)points] was lower than that before the operation [(7.7±0.7)points], and the JOA score [(16.8±0.4)points] was significantly higher than that before the operation [(15.9±0.7)points](P<0.01). In the control group, the VAS 1 year after operation [(2.5±0.5)points] was significantly lower than that before operation [(7.5±0.5)points] (P<0.01), and the JOA score [(16.5±0.5)points] was significantly higher than that before operation [(15.9±0.8)points] (P<0.05). In the study group, according to the CT results, there were 28 atlas pedicle screws of grade 0 (93.3%), two of grade 1 (6.7%), 0 of grade 2, 0 of grade 3, and there were 27 axial pedicle screws of grade 0 (90.0%), three of grade 1 (10.0%), 0 of grade 2, and 0 of grade 3. In the control group, there were 25 atlas pedicle screws of grade 0 (83.3%), four of grade 1 (13.3%), one of grade 2 (3.4%), 0 of grade 3, and there were 27 axial pedical screws of grade 0 (90.0%), three of grade 1 (10.0%), 0 of grade 2, and 0 of grade 3. There was no significant difference in the accuracy of pedicle screw placement between the two groups (P>0.05). No serious complications such as spinal cord or vertebral artery injury occurred. At 3 months after operation, CT showed that the fracture of cervical vertebra healed. Conclusion Individualized 3D printed cervical spine model can guide the pedicle screw placement for upper cervical spine fracture, which can shorten the operation time, reduce the postoperative pain of patients, improve the accuracy of screw placement, and reduce the risks related to operation.