Objective To analyze the characteristics of adverse drug reactions （ADR） reported in Sixth People’s Hospital South Campus, Shanghai Jiaotong University from 2021 to 2023, to provide reference for promoting rational clinical drug use. Methods ADR data reported in our hospital were collected retrospectively, including patients’ basic information, drugs causing adverse reactions, types of adverse reactions and outcomes. Descriptive analysis methods were used to summarize and analyze the data. Results A total of 979 cases of ADR were reported in our hospital from 2021 to 2023. The highest proportion of patients with ADR occurred in the age range of 31 to 50, and more male patients （63.5%）. The top five drugs involved with adverse reactions were antibiotics （48.8%）, Chinese medicine injections（19.2%）, vitamins（7.5%）, Chinese traditional medicine（7.2%）, equine tetanus immunoglobulin（6.3%）. Among antibiotics, cefuroxime, ceftazidime and cefotiam were the majority. The organs/systems involved in all ADR were mainly skin and accessories damage （55.4%）. The clinical manifestations were rash, itching, and maculopapular rash. Conclusion From 2021 to 2023, the most common drugs causing adverse drug reactions in our hospital were mainly antibacterial drugs, and the rational clinical use of antibacterial drugs still needs to be concerned.

BACKGROUND:Osteoporotic vertebral fractures are the most common complication in patients with osteoporosis.As a new imaging technique,spine magnetic resonance imaging(MRI)is much more sensitive than X-ray film in the diagnosis of osteoporotic vertebral fractures.However,total spine MRI is costly and takes a long time to scan.Therefore,there is no consensus on whether all patients with osteoporotic vertebral fractures need to undergo total spine MRI scan and which patients need to undergo total spine MRI. OBJECTIVE:To analyze the distribution characteristics of vertebral fractures and explore their clinical significance by observing the whole spine MRI data of osteoporotic vertebral fractures patients. METHODS:Data of cases and MRI images of all patients diagnosed with fresh osteoporotic vertebral fractures who visited the Department of Orthopedics,Affiliated Hospital of Southwest Medical University from August 2018 to September 2022 were retrospectively analyzed.903 patients were included in the study based on inclusion and exclusion criteria.General information(age,gender,and body mass index),medical history characteristics(duration of illness,history of trauma surgery,percussion pain area,and pain score)were collected.The characteristics of vertebral fractures were analyzed through whole spine magnetic resonance imaging.Firstly,based on the number of vertebral fractures in patients,they were divided into the single vertebral fracture group(484 cases)and the multi-vertebral fracture group(419 cases),and the differences were analyzed between the two groups.Then,based on whether the farthest interval between the fractured vertebrae was greater than or equal to 5,the multi vertebral fracture group was further divided into two subgroups.Among them,Group A(the farthest interval between the fractured vertebrae was less than 5)contained 306 cases;Group B(with the farthest interval between fractured vertebral bodies greater than 5)included 113 cases.The differences were analyzed between two subgroups. RESULTS AND CONCLUSION:(1)Among 903 patients,419 patients(46.4%)had more than two fractured vertebrae.There were 654 patients(72.4%)with thoracolumbar fractures,and 54 patients(6%)with fractures in the thoracic plus lumbar region and the entire thoracic to lumbar region.In group B,96.5%of patients had multiregional percussion pain.(2)Compared with the patients in the single vertebral fracture group and the multi-vertebral fracture group,there were significant differences in bone mineral density,whether the medical history was greater than or equal to 1 month,the history of low energy injury,and the distribution and number of axial percussion pain areas in the spine during physical examination between the two groups(P<0.05).Age,gender,body mass index,whether there was underlying disease,pain visual analog scale score,whether there was a history of elderly thoracolumbar fracture,and whether there was a history of thoracolumbar surgery,and the number of fractured vertebrae had no statistical significance(P>0.05).(3)There were statistically significant differences between the Groups A and B in bone mineral density,the distribution and quantity of percussion pain area,and the history of low energy injury(P<0.05).There were no significant differences in age,gender,history of old fractures,visual analog scale score,body mass index,whether the medical history was longer than or equal to 1 month,history of underlying diseases,and history of thoracolumbar surgery between the two groups(P>0.05).(4)Patients with multiple low-energy trauma history,history of more than 1 month,multiple percussion pain,and the lower bone mineral density should be alert to the occurrence of multiple vertebral fracture and jump fracture.We recommend the whole spinal MRI for these patients.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

ObjectiveBased on multi-index and multi-method detection， the quality of Rukuaixiao preparations was systematically evaluated from the perspective of characteristic components， and the existing problems were analyzed. MethodsLiquid chromatography-mass spectrometry（LC-MS） for the determination of 16 characteristic components was established to evaluate the quality of 129 batches of Rukuaixiao preparations. High performance liquid chromatography（HPLC） was established to determine the contents of salvianolic acids and tanshinones， investigate the rationality of quality control index of Salviae Miltiorrhizae Radix et Rhizoma in the standard for Rukuaixiao preparations in the 2020 edition of Pharmacopoeia of the People's Republic of China（hereinafter referred to as Chinese Pharmacopoeia） （volume Ⅰ）， and trace the causes of significant difference among different batches. The processing and different extraction methods of Vaccariae Semen were tested， analyzing the impact of formulation changes across different editions of Chinese Pharmacopoeia. The LC-MS was established for determining the changes in the ratio of toosendanin and isotoosendanin after water extraction of Toosendan Fructus. The contents of active components in different parts of Gleditsiae Spina were determined to identify the reason of the low contents of characteristic components in some enterprises. ResultsBased on the comprehensive analysis of the samples from different dosage forms， the contents of characteristic components of Vaccariae Semen and Gleditsiae Spina in tablets from manufacturer B and granules from manufacturer D were significantly higher than those in tablets from manufacturer A， and tablets and capsules from manufacturer C. The contents of tanshinones in some batches of products from manufacturer A were abnormally high， potentially linked to the use of 70% ethanol reflux during extraction of Salviae Miltiorrhizae Radix et Rhizoma. All samples from manufacturer C exhibited abnormally high proportions of salvianic acid A and 3，4-dihydroxybenzaldehyde（salvianolic acid degradation products） to the total seven phenolic acids， indicating a risk of blindly pursuing tanshinol content and neglecting more effective components. The extraction rate of the characteristic components from Vaccariae Semen by decocting with water was obviously higher than that by reflux extraction with 70% ethanol. However， using the stir-fried Vaccariae Semen could reduce the loss of ingredients. The content ratio of toosendanin and isotoosendanin decreased from the crude herb to the prepared medicine when Toosendan Fructus was prepared by water decoction. The reason for the low component content of Gleditsiae Spina may be attributed to manufacturers using excessive non-medicinal parts in their formulations. ConclusionIt is suggested that enterprises should ensure the quality of raw material inputs， especially those without quality-control items in the standard， reduce the use of non-medicinal parts， and prohibit arbitrary alterations to manufacturing methods or processes. It is also recommended that Vaccariae Semen in Rukuaixiao capsules and granules should be changed to the stir-fried processed products. Isotoosendanin should be taken into consideration in the drug supervision when Toosendan Fructus is prepared into medicine by water decoction. Salvianolic acid B should be set as a quality control index for Salviae Miltiorrhizae Radix et Rhizoma when revising the pharmacopoeia standard of Rukuaixiao preparations.

ObjectiveBased on multi-index and multi-method detection， the quality of Rukuaixiao preparations was systematically evaluated from the perspective of characteristic components， and the existing problems were analyzed. MethodsLiquid chromatography-mass spectrometry（LC-MS） for the determination of 16 characteristic components was established to evaluate the quality of 129 batches of Rukuaixiao preparations. High performance liquid chromatography（HPLC） was established to determine the contents of salvianolic acids and tanshinones， investigate the rationality of quality control index of Salviae Miltiorrhizae Radix et Rhizoma in the standard for Rukuaixiao preparations in the 2020 edition of Pharmacopoeia of the People's Republic of China（hereinafter referred to as Chinese Pharmacopoeia） （volume Ⅰ）， and trace the causes of significant difference among different batches. The processing and different extraction methods of Vaccariae Semen were tested， analyzing the impact of formulation changes across different editions of Chinese Pharmacopoeia. The LC-MS was established for determining the changes in the ratio of toosendanin and isotoosendanin after water extraction of Toosendan Fructus. The contents of active components in different parts of Gleditsiae Spina were determined to identify the reason of the low contents of characteristic components in some enterprises. ResultsBased on the comprehensive analysis of the samples from different dosage forms， the contents of characteristic components of Vaccariae Semen and Gleditsiae Spina in tablets from manufacturer B and granules from manufacturer D were significantly higher than those in tablets from manufacturer A， and tablets and capsules from manufacturer C. The contents of tanshinones in some batches of products from manufacturer A were abnormally high， potentially linked to the use of 70% ethanol reflux during extraction of Salviae Miltiorrhizae Radix et Rhizoma. All samples from manufacturer C exhibited abnormally high proportions of salvianic acid A and 3，4-dihydroxybenzaldehyde（salvianolic acid degradation products） to the total seven phenolic acids， indicating a risk of blindly pursuing tanshinol content and neglecting more effective components. The extraction rate of the characteristic components from Vaccariae Semen by decocting with water was obviously higher than that by reflux extraction with 70% ethanol. However， using the stir-fried Vaccariae Semen could reduce the loss of ingredients. The content ratio of toosendanin and isotoosendanin decreased from the crude herb to the prepared medicine when Toosendan Fructus was prepared by water decoction. The reason for the low component content of Gleditsiae Spina may be attributed to manufacturers using excessive non-medicinal parts in their formulations. ConclusionIt is suggested that enterprises should ensure the quality of raw material inputs， especially those without quality-control items in the standard， reduce the use of non-medicinal parts， and prohibit arbitrary alterations to manufacturing methods or processes. It is also recommended that Vaccariae Semen in Rukuaixiao capsules and granules should be changed to the stir-fried processed products. Isotoosendanin should be taken into consideration in the drug supervision when Toosendan Fructus is prepared into medicine by water decoction. Salvianolic acid B should be set as a quality control index for Salviae Miltiorrhizae Radix et Rhizoma when revising the pharmacopoeia standard of Rukuaixiao preparations.

Child ; Humans ; Mpox (monkeypox)/prevention & control* ; Disease Outbreaks