ObjectiveTo investigate the epidemiological feature of Mpox infection and genetic characteristics of Mpox viruses (MPXVs), so as to understand the etiological evolution of the pathogen. MethodsThe cases infected with MPXVs were originated from Changning District, Shanghai from July 20 to August 24 in 2023. Epidemiological investigations were conducted, and throat swabs, anal swabs, or vesicle fluid were collected for MPXVs nucleic acid testing. High-throughput sequencing was performed using Miniseq of the Illumina sequencing platform, and thereafter the sequences were concatenated and analyzed using the online analysis tool Nextclade. An evolutionary tree was constructed using the MEGA 11 software. ResultsAll 8 cases were male, with an average age of (35.76±7.00) years. Among them, 6 cases were identified through active hospital visits, and 2 cases were discovered during contact tracing for Mpox cases. Within the 21 days preceding the disease onset, all cases had male-male sexual behaviors, and the incubation period ranged from 6 to 10 days. 3 cases had a history of sexually transmitted diseases (STDs). MPXVs nucleic acid testing indicated that the detection rate of MPXVs was found to be 25.00% for throat swabs, 87.50% for anal swabs, and 100.00% for vesicle fluid, with statistically significant differences (χ²=11.052, P=0.004). Sequencing analyses using the online tool Nextclade indicated that all 8 MPXVs belonged to the West African clade Ⅱb, 4 MPXVs were classified as C.1 sub-lineages, and 4 MPXVs were identified as C.1.1 sub-lineages. Phylogenetic analysis using MEGA 11 indicated that 5 MPXVs were classified as Lineage C.1.1, closely related to the prevalent strains in Portugal and other European regions. ConclusionThe MPXVs sequences from Changning District are clssified into clade Ⅱb, lineage C.1.1. The detection rates of vesicle fluid and anal swabs for MPXVs are significantly higher than that of throat swabs.

ObjectiveTo investigate the trend and influencing factors of newly reported human immunodeficiency virus (HIV) positivity rate among men who had sex with men (MSM) in Shanghai from 2021 to 2024, and to provide evidence for formulating scientific prevention and control measures of AIDS. MethodsMultiple rounds of cross-sectional questionnaire surveys were conducted among MSM by Shanghai Qing’ai Health Promotion Center. Pearson and Cochran-Armitage trend χ² tests were used to analyze the differences and changes in population characteristics and newly reported HIV positivity rates. A logistic regression model was applied for multivariate analyses of factors associated with newly reported HIV positivity. ResultsA total of 1 653 MSM who had not been previously diagnosed with HIV infection were surveyed. The newly reported HIV positivity rates in 2021, 2023, and 2024 were 7.87%, 3.91%, and 3.06%, respectively, showing a decreasing trend (χ²_trend=13.460, P_trend<0.001). Multivariate analyses revealed that MSM aged 18‒<25 years, residing locally for <1 year, identifying as bisexual, lacking HIV knowledge, and having ≥10 same-sex partners in the past 6 months exhibited higher newly reported HIV positivity rates. Conversely, MSM knowledgeable about HIV prevention, residing locally for 1‒5 years, and engaging in oral sex with male partners in the past 6 months demonstrated lower HIV positivity rates. Annual analyses revealed that MSM with HIV knowledge had lower newly reported HIV positivity rates in 2023 and 2024 (aOR=0.300, 95%CI: 0.811‒0.111; aOR=0.202, 95%CI: 0.085‒0.483). ConclusionThe newly reported HIV positivity rate among MSM in Shanghai from 2021 to 2024 showed a decline. Future interventions should focus on young and mobile MSM, strengthen HIV knowledge education through platforms such as the internet, promote safe sexual behaviors and regular testing, and further expand the coverage of pre-exposure prophylaxis (PrEP) and post-exposure prophylaxis (PEP) to control HIV transmission within this population.

Based on the analysis of the relevant records of the contralateral bloodletting technique, it is believed that this needling technique has 3 key characteristics, including "contralateral selection of points", "points on the four extremities dominated" and "collaterals selected rather than meridian points". Through the studies on philology and the annotation by the doctors in the past dynasties, a part of point prescriptions for the contralateral bloodletting is investigated, and those not belonged to the category of this needling technique in Suwen: Miuci Lun (On Contralateral Bloodletting) are distinguished. It is concluded that the failure of consensus-making in classifying point prescriptions is due to the lack of understanding on the characteristics of contralateral bloodletting and the misunderstanding on the errors of sentences and words. It is suggested that the study on theoretic concepts should lay on the problems relevant with the generalization and alienation of concepts. The mode of "combination of the detail with the whole" should be adopted. It starts from grasping the overall by systematic review, and followed by deliberating in details, so as to correctly identify the original concept and connotation.
Humans ; Bloodletting/methods* ; Acupuncture Points ; History, Ancient ; Meridians ; China

ObjectiveTo investigate the levels of neutralizing antibodies against the novel coronavirus in the serum of elderly individuals aged 60 years and above in Shanghai’s Changning District， following natural infection and mixed immunity， in order to provide a basis for strengthening immunity in the elderly. MethodsElderly people who participated in free health check-ups at 10 community health service centers in Changning District from May to June 2023 were selected as the subjects. Information such as gender， age， COVID-19 infection history， COVID-19 vaccine immunization history， and chronic disease history were collected. Serum samples of the subjects were collected and quantitative detection of SARS-CoV-2 neutralizing antibodies was performed by magnetic particle chemiluminescence method. The antibody levels of different populations were analyzed. ResultsA total of 620 subjects were included， 586 of whom （241 males and 345 females） met the study conditions. There were 90 people in the full vaccination + infection group， 224 people in the intensive vaccination + infection group， and 272 people in the unvaccinated + infection group. The positive rates of COVID-19 antibody in the three groups were 94.44% （95%CI： 87.51%‒98.17%）， 95.98% （95%CI：92.51%‒98.15%） and 22.06% （95%CI： 17.28%‒27.46%）， respectively. The positive rates in full vaccination + infection group and intensive vaccination + infection group was significantly higher than that in unvaccinated + infection group （χ²=147.561，P<0.01；χ²=271.729，P<0.01）. The antibody level in full vaccination + infection group （640.74 AU·mL^-1） and intensive vaccination + infection group （1 200.88 AU·mL^-1） was significantly higher than that in unvaccinated + infection group （4.51 AU·mL^-1） （all P<0.01）.The antibody level in the intensive vaccination + infection group was also significantly higher than that in the whole vaccination + infection group （P < 0.05）. ConclusionAfter 5‒6 months of infection， the neutralizing antibody positive rate and antibody level were significantly higher in the elderly who received the full vaccination and infection or intensive vaccination and infection. It is recommended that elderly individuals， who have been infected for more than 5‒6 months but have not been vaccinated， should consider getting vaccinated to enhance their levels of neutralizing antibodies.

ObjectiveTo design a prospective nested case-control study based on a city-wide birth cohort of Shanghai， so as to understand their health status and explore the influencing factors of birth defects. MethodsBased on the birth registration covering the entire city of Shanghai， the nested case-control study of children with severe birth defects was designed. Children born with severe birth defects were selected as the case group， and healthy children were matched as the control group. Basic information， health status， maternal pregnancy history， and survival outcome of children both in the case group and the control group were collected through medical history review and home visits. The logistic regression model was used for multivariate analysis. ResultsA total of 18 875 infants born between January 1， 2011， and December 31， 2021， were included， among which 11 500 （60.93%） were children with severe birth defects and 7 375 （39.07%） were healthy children. The logistic regression model analysis showed that being male （OR=1.20， 95%CI：1.13‒1.29）， non-Shanghai residency （OR=1.16， 95%CI： 1.06‒1.25）， multiple births （OR=8.41， 95%CI：6.25‒11.30）， artificial insemination （OR=2.31， 95%CI：1.34‒3.99）， in vitro fertilization （IVF） （OR=1.85， 95%CI：1.44‒2.38）， maternal exposure to radiation （OR=1.83， 95%CI：1.07‒3.14）， maternal illness during pregnancy （OR=1.61， 95%CI：1.49‒1.74）， experiencing a traumatic event during pregnancy （OR=2.34， 95%CI：1.88‒2.92）， paternal chemical exposure （OR=1.88， 95%CI：1.32‒2.69）， paternal radiation exposure （OR=1.65， 95%CI： 1.18‒2.33）， family history of birth defects （OR=8.18， 95%CI： 3.96‒16.89）， being overweight before pregnancy （OR=1.16， 95%CI： 1.07‒1.27）， being obese before pregnancy （OR=1.15， 95%CI：1.03‒1.30）， and being excessively obese before pregnancy （OR=1.52， 95%CI：1.26‒1.83） were risk factors for the occurrence of birth defects. Analysis by type of birth defect found that prematurity was a risk factor for cardiac malformations and cheilopalatoschisis （OR=27.87， 95%CI： 20.84‒37.27）， especially ranking first in cardiac malformations. ConclusionAfter controlling for influencing factors， maternal overweight， obesity， and excessive obesity before pregnancy， artificial insemination， and IVF are independent risk factors for the occurrence of birth defects. Choosing a healthy lifestyle， improving physical and mental health during pregnancy， and controlling BMI during pregnancy are beneficial in reducing the risk of birth defects.

Objective To study the mechanical properties of titanium mesh and three-dimensional(3D)-printed metal vertebral body substitutes(VBS)to provide guidance for the selection and structural optimization of artificial vertebral implants in clinical practice.Methods The equivalent elastic modulus,equivalent yield strength,and structural failure mode of titanium mesh and 3D-printed porous,truss,and topologically optimized VBS were systematically investigated using compression tests.Results The elastic modulus of the titanium mesh(2 908.73±287.39 MPa)was only lower than that of the topologically optimized VBS.However,their structural strengths and stabilities were inadequate.The yield strength of the titanium mesh(46.61±4.85 MPa)was only higher than that of the porous VBS and it was the first to yield during compression.The porous VBS was insufficient for use as the vertebral implant owing to its poor mechanical strength(18.14±0.17 MPa-25.79±0.40 MPa).The truss VBS had good elastic modulus(2 477.86±55.19 MPa-2 620.08±194.36 MPa)and strength(77.61±0.50 MPa-88.42±1.07 MPa).However,the structural stability of the truss VBS was insufficient,and instability occurred easily during compression.The topologically optimized VBS had the highest elastic modulus(3 746.28±183.80 MPa)and yield strength(177.43±3.82 MPa)among all the tested VBS types,which could provide improved security and stability for artificial vertebral implant in vivo services.Conclusions Topology optimization results in a high strength and high stability VBS design.Moreover,it provides a large design space and great safety margin to provide increased possibilities for lightweight and new material design of future artificial vertebral implants.

ObjectiveTo analyze the clinical and epidemiological characteristics of confirmed cases of human monkeypox infection in Changning District， Shanghai， and to explore their clinical and epidemiological characteristics. MethodsClinical data from 10 reported cases of monkeypox in individuals residing in Changning District or identified by local medical institutions between July 20 and September 30， 2023， were collected. Epidemiological case investigations were conducted， and throat swabs， anal swabs， and rash swabs were collected by the treating medical institutions. Real-time fluorescence quantitative PCR was used for monkeypox virus nucleic acid testing， and descriptive epidemiological analysis was applied to analyze the epidemiological characteristics of the cases. ResultsAll 10 confirmed cases of human monkeypox infection were all young males with an average age of 35.4 years， all of whom belonged to the men who have sex with men （MSM） population， with no occupational clustering. The primary clinical symptoms included fever， rash， enlarged inguinal lymph nodes， and muscle soreness. Nine cases presented with a rash， and seven cases experienced fever symptoms. Among the 10 cases， one experienced fever， rash， enlarged lymph nodes， and muscle soreness； two had fever， rash， and enlarged lymph nodes； two had fever， rash， and systemic soreness； two had only a rash； one had fever or rash； and one was asymptomatic. Among the nine cases with a rash， the rash was mainly localized to the genital or anal area， with fewer cases presenting rashes on the limbs or trunk simultaneously. All cases reported a history of non-exclusive MSM behavior within 21 days before the onset of the disease. The interval between the last suspected high-risk exposure and the onset of symptoms was 4 to 10 days， with an average interval of 6.9 days. The time from the onset of fever to the appearance of a rash was 0 to 5 days， with an average of 1.87 days. ConclusionThe main clinical manifestations of human infection with monkeypox are fever， rash， and enlarged inguinal lymph nodes. The MSM population is a high-risk group for monkeypox infection， and its source of infection may be associated with MSM exposure. Early-stage symptoms are mild， leading to potential underdiagnosis. Additionally， patients may conceal information during the investigation process， which increases the difficulty of epidemic prevention and control.

ObjectiveTo investigate the high-risk detection rate and aggregation of cardiovascular diseases（CVD） in 8 districts of Shanghai and influencing factors， and to provide scientific references for prevention and control of CVD. MethodsBased on the Cardiovascular Disease Screening and Management Program in Shanghai from 2016 to 2021， 104 685 participants aged 35 to 75 in 8 districts of Shanghai were selected for analysis. χ² test and multivariate logistic regression were used for statistical analysis of the influencing factors of CVD and aggregation of CVD. ResultsThe proportion of high-risk CVD individuals in the population was 19.17%， including the high-risk individuals with hypertension （8.65%）， dyslipidemia （6.33%）， CVD history （5.58%）， and WHO assessed risk ≥20% types （2.69%）， respectively. Old age， overweight and obesity， central obesity， smoking， drinking， farmers， unmarried， and low family income were the risk factors of CVD， while high education level was the protective factor. In the participants， 16 323 people （81.34%） were classified as CVD high-risk groups； The number of aggregation of 1， 2 and ≥3 high risk types of CVD were 16 323（81.34%）， 3 236（16.13%）， 509（2.54%）， respectively. Old age， low education level， low annual family income， farmers， unmarried， smoking， drinking， overweight， obesity and central obesity were associated with the risk of aggregation of high risk types of CVD， and the correlation strength increased with the increase of aggregation types. ConclusionThe prevention and control of CVD in Shanghai should focus on the hypertension， elderly， overweight， obesity， central obesity， smoking， drinking， low educated， low family income， farmers and unmarried people， and targeted intervention measures should be taken to reduce the risk of CVD among residents.

Additive manufacturing(3D printing)technology aligns with the direction of precision and customization in future medicine,presenting a significant opportunity for innovative development in high-end medical devices.Currently,research and industrialization of 3D printed medical devices mainly focus on nondegradable implants and degradable implants.Primary areas including metallic orthopaedic implants,polyether-ether-ketone(PEEK)bone implants,and biodegradable implants have been developed for clinical and industrial application.Recent research achievements in these areas are reviewed,with a discussion on the additive manufacturing technologies and applications for customized implants.Challenges faced by different types of implants are analyzed from technological,application,and regulatory perspectives.Furthermore,prospects and suggestions for future development are outlined.

ObjectiveTo investigate the correlation between mild cognitive impairment (MCI) and traditional Chinese medicine (TCM) body constitution types in the elderly, and to provide an evidence for the control of cognitive impairment in the elderly. MethodsThe elderly aged 65 and above who participated in the community physical examinations in a community of Changning District, Shanghai were selected as the research subjects. The cognitive function was assessed by using the Clock Drawing Test combined with the Ascertain Dementia 8-item Questionnaire (AD8), the Montreal Cognitive Assessment (MoCA) and the Mini-mental State Examination (MMSE). The diagnostic criteria for MCI was identified based on the 2018 Chinese Guidelines for the Diagnosis and Treatment of Dementia and Cognitive Disorders, along with the assessment results and clinical history information. The current investigation method was used to collect the basic information and the prevalence of chronic disease of the subjects through questionnaire inquiries. The elderly subjects’ ability to take care of themselves was evaluated based on the Elderly Self⁃Care Ability Evaluation Scale, while the TCM body constitution types were determined based on the Chinese Medicine Health Care Management Service Specification. The association of the detection rate of MCI with gender, education level, history of chronic disease and TCM body constitution types were analyzed lastly. ResultsA total of 2 351 elderly people were investigated, including 1 037 males and 1 314 females, with an average age of (74.11±6.15) years. 174 subjects, accounting for 7.40%, were identified with MCI. The highest detection rate of MCI in the elderly are those with a Qi stagnation constitution (10.8%), followed by those with a dampness-heat constitution (9.1%) and a Qi deficiency constitution (8.4%). Multivariate logistic regression analysis showed that advanced age, lower educational level, a history of tuberculosis, and TCM constitutions such as dampness-heat, Qi stagnation, and Qi deficiency were the potential risk factors for MCI. ConclusionThere is a significant association between TCM constitution types such as dampness-heat, Qi stagnation, and Qi deficiency with MCI. TCM techniques can be integrated into the health management services for the elderly population, and targeted interventions can be provided to those with imbalanced constitution types so as to reduce the risk of MCI.