ObjectiveDetection and quantification of RNA synthesis in cells is a widely used technique for monitoring cell viability, health, and metabolic rate.After exposure to environmental stimuli, both the internal reference gene and target gene would be degraded. As a result, it is imperative to consider the accurate capture of nascent RNA and the detection of transcriptional levels of RNA following environmental stimulation. This study aims to create a Click Chemistry method that utilizes its property to capture nascent RNA from total RNA that was stimulated by the environment. MethodsThe new RNA was labeled with 5-ethyluridine (5-EU) instead of uracil, and the azido-biotin medium ligand was connected to the magnetic sphere using a combination of “Click Chemistry” and magnetic bead screening. Then the new RNA was captured and the transcription rate of 16S rRNA was detected by fluorescence molecular beacon (M.B.) and quantitative reverse transcription PCR (qRT-PCR). ResultsThe bacterial nascent RNA captured by “Click Chemistry” screening can be used as a reverse transcription template to form cDNA. Combined with the fluorescent molecular beacon M.B.1, the synthesis rate of rRNA at 37℃ is 1.2 times higher than that at 15℃. The 16S rRNA gene and cspI gene can be detected by fluorescent quantitative PCR,it was found that the measured relative gene expression changes were significantly enhanced at 25℃ and 16℃ when analyzed with nascent RNA rather than total RNA, enabling accurate detection of RNA transcription rates. ConclusionCompared to other article reported experimental methods that utilize screening magnetic columns, the technical scheme employed in this study is more suitable for bacteria, and the operation steps are simple and easy to implement, making it an effective RNA capture method for researchers.

OBJECTIVE To study the structural characteristics of purified polysaccharide isolated from Polygonatum cyrtonema Hua and explore its anti-fatigue and intestinal bacteria improvement effects,so as to provide theoretical basis for the development of products using this polysaccharide as functional ingredients.METHODS PMP pre-column derivatization-high performance liquid chromatography,trimethylsilyl ether derivatization-gas chromatography and other methods were used to chemically characterize the pu-rified polysaccharide;the mouse weight-loading swimming test and biochemical indicators were used to evaluate its anti-fatigue effect;16S rRNA intestinal flora sequencing was adopted to study the effect of the purified product in improving intestinal bacteria.RESULTS The obtained polysaccharide was a fructan product and contained small amounts of glucose(Glc),galactose(Gal),arabinose(Ara),mannose(Man),rhamnose(Rha)and galacturonic acid(GalA),which had a relative molecular mass in the range of 0.4-285 kDa,and the molecular weight of the main component was around 3 kDa.Compared with the model group,the high-dose polysaccha-ride group could significantly prolong the exhaustive swimming time of mice(P＜0.01),reduce the levels of BUN and UA in serum and the LA(P＜0.01)and MDA levels(P＜0.05)in muscle tissue,and enhance SOD(P＜0.01),GSH-Px(P＜0.001)and CAT(P＜0.05)levels in liver tissue.Compared with the blank control group,the low-dose polysaccharide group could increase the relative a-bundance of probiotics Eggerthelaceae(g_unclassified_f_Eggerthelaceae)and Weissella(g_Weissella)in the fecal microorganisms of mice(P＜0.05).CONCLUSION The chemical composition of purified polysaccharide isolated from Polygonatum cyrtonema Hua is determined,and it is proven that the polysaccharide has a good anti-fatigue effect and can promote the growth of probiotics in the intes-tine,which provides a basis for product development using this polysaccharide as a functional ingredient.

Objective:To analyze the clinical characteristics of invasive klebsiella pneumoniae liver abscess syndrome (IKPLAS), and compare it with common pyogenic liver abscess (CPLA). Methods:The social demography and clinical data of inpatients with pyogenic liver abscess from January 2011 to December 2021 in the Peking University People's Hospital were collected. Based on the presence or absence of invasive infections and the results of bacterial etiology, IKPLAS was diagnosed and compared with CPLA. The general information, symptoms, past medical history, auxiliary examinations and prognosis indicators of the two groups of patients were compared.Results:Total of 172 patients with pyogenic liver abscess were collected, including 25 cases of IKPLAS. Compared with CPLA group, the proportion of fever in IKPLAS group was lower, the proportion of diabetes history was higher, the proportion of monocytes was lower, and procalcitonin and urea nitrogen were higher(all P<0.05), the proportion of multiple abscesses is higher, and the positive rate of blood culture and the cultivation of klebsiella pneumoniae are both higher (all P<0.05).A total of 9 cases (5.2%) of patients developed septic shock, of which 2 cases (1.2%) died. The IKPLAS group had a higher proportion of ICU admissions ( P<0.05),but but the difference of mortality between the two groups was not statistically significant ( P>0.05). The most common sites of invasion infection in the IKPLAS group are the lungs(22/25), brain(9/25), and eyes(9/25). Conclusions:There are differences in clinical characteristics between IKPLAS and CPLA, the most common sites of invasion infection are the lungs, brain, and eyes, but there is no difference in mortality in this study. For PLA with pathogenic Klebsiella pneumoniae, it is necessary to carefully evaluate the presence of invasive lesions and provide targeted local treatment to better improve prognosis.

Objective To carry out a proficiency testing of content determination of geniposide in Gardeniae fructus,evaluate the content determination ability of index components in traditional Chinese medicine in the laboratory of inspection and detection in drug-related fields,and improve the quality control ability of content determination of related laboratories.Methods The laboratory's capability-verification activities were conducted based on the CNAS-RL02 Rules for Proficiency Testing and ISO/IEC 17043 Conformity Assessment-General Requirements for Proficiency Testing.After preparing the sample,the results of homogeneity and stability tests were analyzed according to CNAS-GL003 Guidance on Evaluating the Homogeneity and Stability of Samples Used for Proficiency Testing.After the test results were qualified,they were used as proficiency testing samples and randomly distributed to participants.The results were collected,and the robust statistical method and the Z scores were used to analyze the results of these laboratories'reports.Results 403 laboratories in this proficiency testing program reported the results,of which 367 results were acceptable,accounting for 91.07％,17(4.22％)laboratories obtained suspicious results,and 19 laboratories gave unsatisfactory results,with the dissatisfaction rate of 4.71％.Conclusion The majority of the 403 participant laboratories have the ability to determine the content of geniposide in Gardeniae fructus by HPLC and the laboratory testing ability and quality management level of the drug monitoring system are high.This proficiency testing provides a basis for understanding the technical reserve capacity and management level of China's pharmaceutical inspection and testing laboratories,and provides technical support for future government supervision.

Aim To investigate the mechanism of icar-itin(ICT)on D-galactose(D-gal)-induced TM4 ser-toli cell junctional function damage in vitro.Methods TM4 cells were divided into the normal control group and D-gal treatment group with different concentra-tions.The expression changes of TM 4 cell junction function-related proteins(ZO-1,Occludin,β-catenin and Cx43)and ERα/FAK signaling pathway-related proteins(ERα,FAK and pY397-FAK)were detected by Western blot.The concentration of ICT was screened by MTT method.TM4 cells were divided into normal control group,D-gal treatment group,and D-gal treatment+different concentrations of ICT group.The expression levels of the above proteins were detected by Western blot.Molecular docking was used to study the interaction between ERα and ICT,meanwhile predict the affinity between them.Finally,TM4 cells were di-vided into normal control group,D-gal treatment group,ERα inhibitor group,D-gal+ICT group,and ERα inhibitor+ICT group.The expression levels of the above proteins were detected by Western blot.Re-sults Compared with the normal control group,the ex-pression of junctional function-related proteins(ZO-1,Occludin,β-catenin and Cx43)and ERα/FAK signa-ling pathway-related proteins(ERα,FAK and pY397-FAK)were significantly down-regulated.After treat-ment with ICT,the expression of above proteins were significantly up-regulated.The docking results of ERα and ICT molecules revealed the formation of two hydro-gen bonds between Asp351 amino acid residue of ERα and ICT,with bond distances measuring 3.4? and 2.4?.Additionally,the docking binding energy be-tween them was found to be lower than-7 kcal·mol-1.After TM4 cells were treated with ERα inhibi-tor,the expression of above proteins and ERα/FAK signaling pathway-related proteins were significantly down-regulated,while the expression levels of the a-bove proteins did not change significantly after being given ICT protected group.Conclusions D-gal can cause damage to the junctional function of TM4 cells,and ICT can improve this damage,which may be related to the up-regulation of ERα/FAK signaling pathway.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.