OBJECTIVES: To promote the further research on body stature estimation and the innovative applications based on the distances between the anatomical landmarks on body torso surface. METHODS: A specification for the collection of distances between the anatomical landmarks on body torso surface was established. The data of 933 cases of adult population in Yangtze River Delta region were collected. Multiple linear regression method was used to statistical analyse and establish the regression equation of stature estimation. RESULTS: A regression equation about 5 variables including gender （x₁）, cervical vertebrae-coccyx line （x₂）, sterna-pubis line （x₃）, distance between acromion and iliospinale anterius （x₄） and shoulder breadth （x₅）, and stature （y） was established, y=105.406+5.414 x₁+0.436 x₂+0.286 x₃+0.225 x₄+ 0.193 x₅. CONCLUSIONS The method is suitable for the rapid, simple and accurate estimation of stature for the forensic experts.
Adult ; Body Height ; Bone and Bones/anatomy & histology* ; Cervical Vertebrae/anatomy & histology* ; Female ; Forensic Anthropology/methods* ; Humans ; Linear Models ; Male ; Regression Analysis ; Torso/anatomy & histology*

INTRODUCTIONThe uncinate process (UP) has an important role because of its relationship with the vertebral artery and spinal roots. Degenerative diseases cause osteophyte formation on the UP, leading to radiculopathy, myelopathy and vertebral vascular insufficiency, which may require surgical management. This study aimed to evaluate the morphometry of this region to shed light on the anatomy of the UP.

METHODSMorphometric data was obtained from 13 male formaldehyde-fixed cadavers. Direct measurements were obtained using a metal caliper. Computed tomography (CT) morphometry was performed with the cadavers in the supine position.

RESULTSDirect cadaveric measurements showed that the height of the UP increased from C3 (5.8 ± 1.0 mm) to C7 (6.6 ± 0.5 mm). On CT, the corresponding measurements were 5.9 ± 1.2 mm at C3 and 6.9 ± 0.6 mm at C7. The distance between the left and right apex of the UP from C3 to C7 also increased on both direct cadaveric and CT measurements (C3: 20.8 ± 1.0 mm and C7: 28.1 ± 2.4 mm vs. C3: 23.7 ± 3.4 mm and C7: 29.0 ± 3.0 mm, respectively). On CT, the distance between the UP and superior articular process at the C3 to C7 levels were 9.8 ± 1.7 mm, 7.9 ± 1.8 mm, 7.9 ± 1.6 mm, 7.8 ± 1.3 mm and 8.2 ± 1.7 mm, respectively.

CONCLUSIONDirect cadaveric and CT measurements of the UP are useful for preoperative evaluation of the cervical spine and may lead to better surgical outcomes.

Cadaver ; Cervical Vertebrae ; anatomy & histology ; physiology ; surgery ; Formaldehyde ; Humans ; Male ; Tomography, X-Ray Computed

PURPOSE: There have been a few previous reports regarding the distances between the medial borders of the longus colli to expose the disc space. However, to our knowledge, there are no reports concerning longus colli dissection to expose the uncinate processes. This study was undertaken to assess the surgical relationship between the longus colli muscle and the uncinate process in the cervical spine. MATERIALS AND METHODS: This study included 120 Korean patients randomly selected from 333 who had cervical spine MRIs and CTs from January 2003 to October 2013. They consisted of 60 males and 60 females. Each group was subdivided into six groups by age from 20 to 70 years or more. We measured three parameters on MRIs from C3 to T1: left and right longus colli distance and inter-longus colli distance. We also measured three parameters on CT: left and right uncinate distance and inter-uncinate distance. RESULTS: The longus colli distances, uncinate distances, and inter-uncinate distances increased from C3 to T1. The inter-longus colli distances increased from C3 to C7. There was no difference in longus colli distances and uncinate distances between males and females. There was no difference in the six parameters for the different age groups. CONCLUSION: Although approximate guidelines, we recommend the longus colli be dissected approximately 5 mm at C3-5, 6 mm at C5-6, 7 mm at C6-7, and 8 mm at C7-T1 to expose the uncinate process to its lateral edge.
Adult ; Aged ; Cervical Vertebrae/*anatomy & histology/diagnostic imaging/*surgery ; Dissection ; Female ; Humans ; Male ; Middle Aged ; Neck Muscles/*anatomy & histology/diagnostic imaging/*surgery ; Random Allocation ; Young Adult

OBJECTIVETo construct a human cervical spine with bilateral vertebral artery fluid-solid coupling model.

METHODSHelical CT images under the principle of reverse engineering and meshed in finite element model（FEM） related software were used to establish a human cervical spine with bilateral vertebral artery fluid-solid coupling model. In the process of modeling of vertebral body, vertebral artery, ligament, intervertebral disc, cartilage and endplate large anatomic data and cadaver experiments results were referenced. From the morphology and function the simulation of model with real physiological status was tested.

RESULTSThe study showed that the stress concentration on the surface of vertebral body and the blood wall of the bilateral vertebral artery, and the result of the volume flow rate-time curve of bilateral vertebral artery of the model were consistent with the published literatures. This model was well consistent with the clinical phenomenon.

CONCLUSIONThe three-dimensional FEM of the human cervical spine established by the introduced method has been effectively verified. The modeling method would provide a new tool for research on the cervical spine biomechanics.

Biomechanical Phenomena ; Cadaver ; Cervical Vertebrae ; anatomy & histology ; Finite Element Analysis ; Humans ; Intervertebral Disc ; Models, Anatomic ; Tomography, Spiral Computed ; Vertebral Artery ; anatomy & histology

The height, width, and cross-sectional area of the vertebral canal and spinal cord along with the area ratio of spinal cord to vertebral canal in the cervical vertebra were evaluated in images obtained using computed tomography (CT). Measurements were taken at the cranial, middle, and caudal point of each cervical vertebra in eight clinically normal small breed dogs (two shih tzu, two miniature schnauzers, and four mixed breed), 10 beagles, and four German shepherds. CT myelography facilitated the delineation of the epidural space, subarachnoid space, and spinal cord except at the caudal portion of the 7th cervical vertebra. The spinal cord had a tendency to have a clear ventral border in the middle portion of the vertebral canal and lateral borders near both end plates. The height, width, and area of the vertebral canal and spinal cord in the cervical vertebra were increased as the size of dog increased. However, the ratio of the spinal cord area to vertebral canal area in the small dogs was higher than that of the larger dogs. Results of the present study could provide basic and quantitative information for CT evaluation of pathologic lesions in the cervical vertebra and spinal cord.
Animals ; Body Size ; Cervical Vertebrae/*anatomy & histology/radiography ; Dogs/*anatomy & histology/growth & development ; Reference Values ; Spinal Canal/*anatomy & histology/radiography ; Spinal Cord/*anatomy & histology/radiography ; Tomography, X-Ray Computed/*veterinary

OBJECTIVETo investigate the relationship of upper cervical pedicle and vertebral artery (VA) location in order to improve the safety of transpedicular screw insertion.

METHODSThe vertebral arteries on 12 sides of 6 adult pate cadaverous specimens were dissected. The distance between VA and VA groove at the atlas needling point of transpedicle screw, and the distance between VA and the inner edge of axis cervical foramen, and the VA external diameter in axis cervical foramen were measured respectively.

RESULTSThe distance between VA and VA groove was (1.96 ± 0.72) mm on the left and (1.99 ± 0.61)mm on the right at the atlas needling point of transpedicle screw, the distance between VA and the inner edge of axis cervical foramen was (2.23 ± 0.43) mm on the left and (2.30 ± 0.39) mm on the right, the VA external diameter in axis cervical foramen was (3.03 ± 0.48) mm on the left and (2.98 ± 0.75) mm on the right.

CONCLUSIONIt is unlikely to injury VA when the transpedicle screws of upper cervical vertebrae were implanted correctly besides high straddled VA, and the individualization must be performed in the process.

Adult ; Aged ; Cervical Vertebrae ; surgery ; Female ; Fracture Fixation, Internal ; methods ; Humans ; Male ; Middle Aged ; Pedicle Screws ; Vertebral Artery ; anatomy & histology

OBJECTIVETo analyze the data of angle variation on traction based on a finite element model of complete cervical spine with straight physiological curvature, and try to give experimental reference and suggestion in treating cervical spondylosis.

METHODSA 43-year-old female patient with straight cervical spine was chosen and the CT scan data were collected. By using specially designed modeling system, a high quality finite element model of complete cervical spine with straight physiological curvature is generated,which included ligament and muscle according to anatomy. After the model was confirmed, traction was loaded with angle 0 degree, anterior 5 degrees, 10 degrees, 15 degrees, 20 degrees, 25 degrees, to observe the data of distance change on between adjacent intervertebral foramen, processus articularis, uncovertedral joint, intervertebral discs, and stress of anulus fibrosus and nucleus pulposus.

RESULTSWhen the angle was 0 degrees-15 degrees, the distance between intervertebral foramen, Luschka joint and processus articularis posterioris was enlarged, the tensile stress was adequate and compressive stress was small. It met the clinical requests.

CONCLUSION0 degree-15 degrees anterior position is suggested for the treatment of cervical spondylosis.

Adult ; Biomechanical Phenomena ; Cervical Vertebrae ; anatomy & histology ; surgery ; Female ; Finite Element Analysis ; Humans ; Spondylosis ; surgery ; Traction ; methods

Measurement of cervical lordosis is the basic method for evaluating cervical function, and important reference for determine treatment decision. However, how to choose appropriate measurement in accordance with different situation, as well as the relationship among these methods is not clear. An increasing number of studies suggested that different measurements could directly affect the judgment of cervical lordosis. Therefore, comparative study of cervical vertebrae plays an important role in clinical treatment for cervical spondylosis under different cervical curvature conditions.
Cervical Vertebrae ; anatomy & histology ; Humans ; Lordosis ; diagnosis ; pathology

Clinical advantages of Chinese spinal manipulation therapy (CSMT) were recognized for spinal chronic lesions of soft tissues and bones, such as cervical spondylosis, etc. However, the security of CSMT and the hypotheses of practice mechanisms were questioned for lacking of the relevant basic researches. Researches have proved that these methods could be used to observe the dynamic effects of spine with application of finite element analysis (FEA) computer technology. Combining with other biomechanical experimental methods and applying advanced FEA technology for mechanical problems of CSMT, we may not only find the mechanisms of action and provide theoretical supports for the traditional Chinese therapy, but also standardize the key techniques and optimize the treatment options improving clinical outcomes, and even promote spreading of CSMT. Computer models are ideally suited for studying phenomena that cannot be satisfactorily investigated with other models. However, computer models of CSMT practice remain to be further refined. The results which had been acquired so far not only verified some of the traditional points of view, but also revised and specified some perspectives of the past. This paper intends to review FEA studies with Chinese cervical manipulation therapy (CCMT) for cervical spinal chronic lesions of soft tissues and bones, involving different effects for cervical spine joints (pulling/traction and thrusting) with practice techniques and cervical spine soft tissues (including vessels and its hemodynamics, muscles and fasciae, etc).
Biomechanical Phenomena ; Cervical Vertebrae ; anatomy & histology ; physiopathology ; Finite Element Analysis ; Humans ; Manipulation, Spinal ; methods ; Spondylosis ; physiopathology ; therapy

OBJECTIVETo study clinical significance of vertebral artery magnetic resonance angiography (MRA) to vertebral artery type of cervical spondylosis' diagnosis and treatment.

METHODSThere were two groups in the study, which were observation group and control group. There were 53 patients in observation group,including 19 males and 34 females,with a mean age of (52.51 +/- 11.29) years. There were 30 subjects in control group,including 10 males and 20 females,with a mean age of (48.11 +/- 12.21) years. Based on the vertebral artery MRA picture,the course and caliber of vertebral artery were compared between two groups.

RESULTSThe abnormal incidence of course and caliber of vertebral artery in observation group was higher than that of control group, which had statistic difference (P=0.000). Furthermore, the patterns of abnormal course and caliber of vertebral artery in observation group were complicated and diverse, but the regional circuity and stegnosis was the most common pattern,about 47.18%(25/53). The cause of circuity and stegnosis was vertebra Gu-Cuofeng,about 43.41% (23/53).

CONCLUSIONThe vertebral artery MRA provides a guidance for the diagnosis of abnormal course and caliber of vertebral artery in vertebral artery cervical spondylosis.

Adult ; Aged ; Cervical Vertebrae ; blood supply ; Female ; Humans ; Magnetic Resonance Angiography ; methods ; Male ; Middle Aged ; Radiography ; Spondylosis ; diagnosis ; diagnostic imaging ; therapy ; Vertebral Artery ; anatomy & histology ; diagnostic imaging