BACKGROUND: Bone marrow-derived mesenchymal stem cells (BMSCs) and bone morphogenetic protein-2 (BMP-2) have been studied for bone repair because they have regenerative potential to differentiate into osteoblasts. The development of injectable and in situ three-dimensional (3D) scaffolds to proliferate and differentiate BMSCs and deliver BMP-2 is a crucial technology in BMSC-based tissue engineering. METHODS: The proliferation of mouse BMSCs (mBMSCs) in collagen/poly-γ-glutamic acid (Col/γ-PGA) hydrogel was evaluated using LIVE/DEAD and acridine orange and propidium iodide assays. In vitro osteogenic differentiation and the gene expression level of Col/γ-PGA(mBMSC/BMP-2) were assessed by alizarin red S staining and quantitative reversetranscription polymerase chain reaction. The bone regeneration effect of Col/γ-PGA(mBMSC/BMP-2) was evaluated in a mouse calvarial bone defect model. The cranial bones of the mice were monitored by micro-computed tomography and histological analysis. RESULTS: The developed Col/γ-PGA hydrogel showed low viscosity below ambient temperature, while it provided a high elastic modulus and viscous modulus at body temperature. After gelation, the Col/γ-PGA hydrogel showed a 3D and interconnected porous structure, which helped the effective proliferation of BMSCs with BMP-2. The Col/γ-PGA (mBMSC/BMP-2) expressed more osteogenic genes and showed effective orthotopic bone formation in a mouse model with a critical-sized bone defect in only 3–4 weeks. CONCLUSION The Col/γ-PGA(mBMSC/BMP-2) hydrogel was suggested to be a promising platform by combining collagen as a major component of the extracellular matrix and γ-PGA as a viscosity reducer for easy handling at room temperature in BMSC-based bone tissue engineering scaffolds.

The purpose of this study was to evaluate the structural characteristics of the thread length of orthodontic mini-screws and the effects of insertion and removal torques according to the formation of the cutting flute. Two types of mini-screws were made, with a thread length of 6.0 mm and a thread length of 3.3 mm. In order to examine the effect of flute formation, the experiment group was divided into a miniscrew test group with flute formation and an experiment group without flute formation. To evaluate the effect of flute formation, two flutes were formed at 180°on the circumference, and at the tip of the mini screw, up to 4 mm for thread length of 6.0 mm and 2.4 mm for thread length of 3.3 mm. A biomechanical test block formed of 2 mm cortical bone and 10 mm cancellous bone was used to eliminate the influence of the difference in cortical bone thickness and bone density according to the insertion site. 1 mm diameter guide hole was drilled on the test block and the mini-screw was placed vertically. Using a 0.1 N·cm precision digital torque gauge, the maximum torque value was recorded at this time by embedding it to the top of the screw under a static load of 1.2 kg and the value when it was removed in the opposite direction. The insertion torque values for the 6.0 mm and 3.3 mm length mini screws were (29.53±1.84) N·cm and (26.84±2.15) N·cm, and the removal torque values are (14.50±1.37) N·cm and (13.15±2.89) N·cm, respectively.There were no statistically significant differences (P>0.05). The flute of 6.0 mm mini-screws had no statistically significant difference in both insertion and removal torque values and increased to (30.13±1.97) N·cm and (18.65±1.10) N·cm (P>0.05). In experiments with 3.3 mm mini-screws, the insertion and removal torque values decreased to (20.99±3.94) N·cm and (11.32±2.03) N·cm, respectively, showing a statistically significant decrease only in the insertion torque values (P<0.05). The insertion and removal torque values of the mini-screw were not significantly increased even when the screw length was doubled, and the flute formation effect was different with the screw length.

The purpose of this study was to evaluate the structural characteristics of the thread length of orthodontic mini-screws and the effects of insertion and removal torques according to the formation of the cutting flute. Two types of mini-screws were made, with a thread length of 6.0 mm and a thread length of 3.3 mm. In order to examine the effect of flute formation, the experiment group was divided into a miniscrew test group with flute formation and an experiment group without flute formation. To evaluate the effect of flute formation, two flutes were formed at 180°on the circumference, and at the tip of the mini screw, up to 4 mm for thread length of 6.0 mm and 2.4 mm for thread length of 3.3 mm. A biomechanical test block formed of 2 mm cortical bone and 10 mm cancellous bone was used to eliminate the influence of the difference in cortical bone thickness and bone density according to the insertion site. 1 mm diameter guide hole was drilled on the test block and the mini-screw was placed vertically. Using a 0.1 N·cm precision digital torque gauge, the maximum torque value was recorded at this time by embedding it to the top of the screw under a static load of 1.2 kg and the value when it was removed in the opposite direction. The insertion torque values for the 6.0 mm and 3.3 mm length mini screws were (29.53±1.84) N·cm and (26.84±2.15) N·cm, and the removal torque values are (14.50±1.37) N·cm and (13.15±2.89) N·cm, respectively.There were no statistically significant differences (P>0.05). The flute of 6.0 mm mini-screws had no statistically significant difference in both insertion and removal torque values and increased to (30.13±1.97) N·cm and (18.65±1.10) N·cm (P>0.05). In experiments with 3.3 mm mini-screws, the insertion and removal torque values decreased to (20.99±3.94) N·cm and (11.32±2.03) N·cm, respectively, showing a statistically significant decrease only in the insertion torque values (P<0.05). The insertion and removal torque values of the mini-screw were not significantly increased even when the screw length was doubled, and the flute formation effect was different with the screw length.

The purpose of this study was to evaluate the effect of the reaction between investment material and zirconia on the strength of zirconia in the application of heat-pressing method. Sixty specimens were cut (24 mm×4 mm×0.5 mm) into plates from Zirtooth ™ Multi O-9814 block (∅98×14T, HASS, Gangwondo, Korea) and sintered at 1450℃. Specimens were divided into 6 subgroups according to the depending on the investement material; (a) UN group (Control), (b) PH group (Prime vest HS), (c) CP group (Calibra-press), (d) BV group (BC-Vest), (e) MH group (Microstar-HS), (f) F1 group (Formula 1). Five investment materials were buried according to the procedure recommended by the manufacturer and left at room temperature for 30 minutes. The investment mold was dried and maintained at an elevated temperature of 850℃ for 50 minutes. Then, Amber Lisi-POZ LT (HASS) was placed in a thermoformed electric furnace (Programat EP3000/G2, Ivoclar Vivadent, Schaan, Liechtenstein) together with the mold, heated to 915℃ at an elevation temperature of 45℃/min, and moored for 15 minutes. The specimens were loaded to fracture in a universal testing machine and the fracture surface was examined by a field-emission scanning electron microscopy (FE-SEM). The surface of the zirconia specimen with the investment material was analyzed by energy dispersive X-ray spectroscopy (EDS). The 3-point flexural strength test showed the highest value (1265.5 MPa) in the UN group and the lowest value (756.1 MPa) in the F1 group. As a result of EDS analysis, the largest amount of Si was detected in the F1 group, and the most interfacial changes occurred as a result of FE-SEM analysis. It was concluded that when the zirconia is buried with the investment material and the heat press molding is performed, the state of the interface is changed due to the investment material at the bonding interface while the strength is lowered.

The purpose of this study was to evaluate the effect of the reaction between investment material and zirconia on the strength of zirconia in the application of heat-pressing method. Sixty specimens were cut (24 mm×4 mm×0.5 mm) into plates from Zirtooth ™ Multi O-9814 block (∅98×14T, HASS, Gangwondo, Korea) and sintered at 1450℃. Specimens were divided into 6 subgroups according to the depending on the investement material; (a) UN group (Control), (b) PH group (Prime vest HS), (c) CP group (Calibra-press), (d) BV group (BC-Vest), (e) MH group (Microstar-HS), (f) F1 group (Formula 1). Five investment materials were buried according to the procedure recommended by the manufacturer and left at room temperature for 30 minutes. The investment mold was dried and maintained at an elevated temperature of 850℃ for 50 minutes. Then, Amber Lisi-POZ LT (HASS) was placed in a thermoformed electric furnace (Programat EP3000/G2, Ivoclar Vivadent, Schaan, Liechtenstein) together with the mold, heated to 915℃ at an elevation temperature of 45℃/min, and moored for 15 minutes. The specimens were loaded to fracture in a universal testing machine and the fracture surface was examined by a field-emission scanning electron microscopy (FE-SEM). The surface of the zirconia specimen with the investment material was analyzed by energy dispersive X-ray spectroscopy (EDS). The 3-point flexural strength test showed the highest value (1265.5 MPa) in the UN group and the lowest value (756.1 MPa) in the F1 group. As a result of EDS analysis, the largest amount of Si was detected in the F1 group, and the most interfacial changes occurred as a result of FE-SEM analysis. It was concluded that when the zirconia is buried with the investment material and the heat press molding is performed, the state of the interface is changed due to the investment material at the bonding interface while the strength is lowered.

Background: Although neuromyelitis optica spectrum disorder (NMOSD) is known to be a rare disease, its prevalence and incidence have not yet been studied in Korea. We performed a population-based study to examine the prevalence and incidence of NMOSD in Korea using data from the Korean National Health Insurance (NHI) claims database. Methods: Data from 2013 to 2017 were obtained, with a washout period set as 2013 and 2014. The prevalence and incidence of NMOSD in 2016 and 2017 were calculated using population census data. Subjects were divided into 5 groups at 15-year intervals, depending on the age at which the diagnostic code was entered. The relative risk (RR) for each age group was compared with the oldest (≥ 60 years) age group. Results: The overall prevalence was estimated to be 3.36 and 3.56 per 100,000 individuals, with an incidence of 0.41 and 0.65 per 100,000 individuals-year in 2016 and 2017, respectively. The mean age was 43.08 (standard deviation, 14.56) years, and the ratio of male to females was 1:4.7. The incidence was higher in female individuals aged between 30 and 59 years (RR, 2.8–3.05; P < 0.05). Conclusion Nationwide prevalence of NMOSD in Korea was 3.36 and 3.56/100,000 and its incidence was 0.41 and 0.65/100,000-year in 2016 and 2017 respectively.

PURPOSE: To investigate levels of serum homocysteine in patients with pseudoexfoliation syndrome and the association between serum homocysteine levels and risk of coronary heart disease. METHODS: From March 2013 to September 2013, 37 patients with pseudoexfoliation syndrome and 59 age-matched patients (control group) were enrolled in this prospective study. Serum homocysteine levels were compared between the 2 groups. We compared the estimated 10-year risk of coronary heart disease based on Framingham risk score between the 2 groups. Additionally, we analyzed correlations between risk of coronary heart disease and serum homocysteine levels. RESULTS: The mean homocysteine level of patients with pseudoexfoliation syndrome was significantly higher than the control group (13.3 ± 6.8 µmol/L vs. 10.0 ± 5.2 µmol/L, p = 0.009). The rate of high risk defined as a 10-year coronary heart disease risk >20% in the patients with pseudoexfoliation syndrome was significantly higher than in the control group (21.4% vs. 4.4%, p = 0.048). Correlation between serum homocysteine levels and estimated 10-year risk of coronary heart disease was statistically significant (r = 0.578, p < 0.001). CONCLUSIONS: Hyperhomocysteinemia and high risk of coronary heart disease were observed in patients with pseudoexfoliation syndrome. Therefore, we suggest efforts to prevent coronary heart disease in pseudoexfoliation syndrome patients with hyperhomocysteinemia are necessary.
Coronary Disease* ; Exfoliation Syndrome* ; Homocysteine* ; Humans ; Hyperhomocysteinemia ; Prospective Studies

PURPOSE: We compared oncologic outcomes between surgery and radiofrequency ablation (RFA) in patients with metachronous isolated hepatic metastases from colorectal cancer.METHODS: We retrospectively analyzed 123 patients treated with hepatic resection and 82 patients treated with RFA for metachronous hepatic metastases between April 2000 and October 2011. Re-recurrence pattern and 3-year re-recurrence free survival (RFS) rate compared between groups. Factors associated with RFS were evaluated.RESULTS: The patients in the two groups were similar in age, gender, location of primary tumor, disease-free interval to hepatic metastasis, pathological stage of primary disease, number of metastatic lesions. The mean diameter of the biggest hepatic metastatic lesion was significantly larger in the resection group than in the RFA group. The RFS rate after hepatic metastasis treatment was significantly higher in the resection group than in the RFA group (48.6% vs. 33.7%, respectively; P=0.015). Marginal recurrence at the RFA site was observed in 14 of the 82 patients (17.1%). The size and number of metastatic lesions, stage of primary disease, disease-free interval to hepatic metastasis, and modality of treatment were confirmed as re-recurrence-associated factors after hepatic metastasis treatment. Among patients with solitary metastases of ≤3 cm, the RFS rate was not different between the resection and RFA groups (52.4% vs. 53.4%, respectively; P=0.491).CONCLUSION: Surgical resection for metachronous hepatic metastases achieved higher RFS and lower local recurrence rates. However, the RFS rate in patients with a solitary hepatic metastasis of ≤3 cm was similar between the resection and RFA groups.
Catheter Ablation ; Colorectal Neoplasms ; Hepatectomy ; Humans ; Liver ; Neoplasm Metastasis ; Recurrence ; Retrospective Studies

BACKGROUND: Plate fixation is the most commonly used technique for the treatment of shaft fractures of both forearm bones (SFBFBs). However, all fractures are difficult to treat with plate fixation because of soft tissue injuries, fracture patterns, or the patient's condition. The purpose of this study is to compare the functional results of plate fixation only and combined plate and intramedullary (IM) nail fixation in SFBFBs. METHODS: Fifty-nine cases of SFBFBs that were surgically treated from June 2007 to July 2012 were retrospectively reviewed. In this study, 47 cases that were followed up for more than 12 months were included. All SFBFBs were divided into two groups according to the methods used for internal fixation: plate fixation only (group A) and combined plate and IM nail fixation (group B). The fixation methods were determined intraoperatively. Plate fixation was considered as the first option in all cases, but combined plate and IM nail fixation was selected as the second option if it was difficult to be fixed with plate only. Groups A and B comprised of 31 and 16 cases, respectively. The functional results were evaluated by the Grace and Eversmann rating system and the Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire. RESULTS: In groups A and B, a radiologic union was achieved in 30/31 and 14/16 cases and average union time was 11.1 and 17.8 weeks, respectively. According to the Grace and Eversmann rating system, group A had excellent results in 15 cases, good in 14, acceptable in one, and unacceptable in one. Group B had excellent results in three cases, good in nine, acceptable in two, and unacceptable in two. The average DASH score was 7.1 points (range, 0 to 19.2 points) in group A and 15.1 points (range, 0 to 29.6 points) in group B. Three cases of nonunion with unacceptable results achieved a bony union by additional procedures and the functional results of these cases improved to good or excellent. CONCLUSIONS: The functional results and the average union time were superior in group A than in group B. However, we think that combined fixation is a useful method for SFBFBs that cannot be treated with plate fixation only.
Adolescent ; Adult ; Aged ; Aged, 80 and over ; Bone Nails/*statistics & numerical data ; Bone Plates/*statistics & numerical data ; Female ; Forearm/surgery ; Fracture Fixation, Intramedullary/adverse effects/*methods/*statistics & numerical data ; Humans ; Male ; Middle Aged ; Radius Fractures/epidemiology/*surgery ; Range of Motion, Articular/*physiology ; Retrospective Studies ; Treatment Outcome ; Ulna Fractures/epidemiology/*surgery ; Young Adult

BACKGROUND/AIMS: Fabry disease is an X-linked recessive and progressive disease caused by alpha-galactosidase A (alpha-GaL A) deficiency. We sought to assess the prevalence of unrecognized Fabry disease in dialysis-dependent patients and the efficacy of serum globotriaosylceramide (GL3) screening. METHODS: A total of 480 patients of 1,230 patients among 17 clinics were enrolled. Serum GL3 levels were measured by tandem mass spectrometry. Additionally, we studied the association between increased GL3 levels and cardiovascular disease, cerebrovascular disease, or left ventricular hypertrophy. RESULTS: Twenty-nine patients had elevated serum GL3 levels. The alpha-GaL A activity was determined for the 26 patients with high GL3 levels. The mean alpha-GaL A activity was 64.6 nmol/hr/mg (reference range, 45 to 85), and no patient was identified with decreased alpha-GaL A activity. Among the group with high GL3 levels, 15 women had a alpha-GaL A genetics analysis. No point mutations were discovered among the women with high GL3 levels. No correlation was observed between serum GL3 levels and alpha-GaL A activity; the Pearson correlation coefficient was 0.01352 (p = 0.9478). No significant correlation was observed between increased GL3 levels and the frequency of cardiovascular disease or cerebrovascular disease. CONCLUSIONS: Fabry disease is very rare disease in patients with end-stage renal disease. Serum GL3 measurements as a screening method for Fabry disease showed a high false-positive rate. Thus, serum GL3 levels determined by tandem mass spectrometry may not be useful as a screening method for Fabry disease in patients with end stage renal disease.
Adult ; Aged ; Fabry Disease/blood/*diagnosis ; Female ; Humans ; Kidney Failure, Chronic/blood/*therapy ; Male ; Middle Aged ; *Renal Dialysis ; Trihexosylceramides/*blood ; alpha-Galactosidase/genetics/metabolism