Objective To analyze the influence of shaping on the bending strength of bone plates and the influence of different locking nail distributions on plate force to provide biomechanical references for shaping plates and selecting different locking nail distributions.Methods Finite element simulation analysis of the four-point bending strength of a plate was performed according to the YY/T 0342-2020 standard.Theoretical analysis and finite element simulation method were used to analyze the force on prosthesis models with different lock-nail distributions.Results At 30° bending,the 3.7 mm-thick plate had 28%higher equivalent plastic strain than the 2.7 mm-thick plate.The 3.7 and 2.7 mm-thick plates had ultimate bending angles of 55° and 67°,respectively.The crease had little impact on the plate stress.The four-point bending strength and equivalent bending stiffness of the unshapeed structure were 2.64 N·m and 1.12 N·m2,respectively.The four-point bending strength and equivalent bending stiffness with the crease were 2.63 N·m and 1.10 N·m2,respectively.After forward and backward bending,the four-point bending strength of the plate decreased from 2.64 to 2.45 N·m by approximately 7.72%,and the equivalent bending stiffness decreased from 1.12 to 0.98 N·m2 by approximately 12%.The impact was obvious.After implantation of tamponade screws,the four-point bending strength of the single-hole plate improved significantly from 2.64 to 3.15 N·m,by approximately 19.32%and the equivalent bending stiffness increased from 1.12 to 1.14 N·m2,by approximately 2.1%.At least two locking holes were reserved on both sides of the fracture line.Not inserting the locking screw reduced the stress by approximately 50%compared with the full insertion of the locking screw.During 15-week postoperative walking without bone callus formation,the material stress of TC4 reached 852.7 MPa and yielding occurred.Conclusions In a clinical scenario where larger shaping is required,it is not suitable for plates with larger thicknesses and plate fractures are more likely to occur after large-thickness shaping.This can guide the clinical selection of plates with appropriate thickness based on the shaping angle,and tamponade screws can be implanted in extreme cases.Fixing locking screws clinically is recommended;however,a method of fixing the locking screws with full screws is not recommended.The biomechanical effect is best when two locking holes at both ends of the fracture line are maintained without fixing the locking screws.

Objective To introduce a locating device for the entry point of intramedullary nail based on the inertial navigation technology,which utilizes multi-dimensional angle information to assist in rapid and accurate positioning of the ideal direction of femoral anterograde intramedullary nails'entry point,and to verify its clinical value through clinical tests.Methods After matching the locating module with the developing board,which are the two components of the locating device,they were placed on the skin surface of the proximal femur of the affected side.Anteroposterior fluoroscopy was performed.The developing angle corresponding to the ideal direction of entry point was selected based on the X-ray image,and then the yaw angle of the locating module was reset to zero.After resetting,the locating module was combined with the surgical instrument to guide the insertion angle of the guide wire.The ideal direction of entry point was accurately located based on the angle guidance.By setting up an experimental group and a control group for clinical surgical operations,the number of guide wire insertion times,surgical time,fluoroscopy frequency,and intraoperative blood loss with or without the locating device was recorded.Results Compared to the control group,the experimental group showed significant improvement in the number of guide wire insertion times,surgical time,fluoroscopy frequency,and intraoperative blood loss,with a statistically significant difference(P<0.01).Conclusion The locating device can assist doctors in quickly locating the entry point of intramedullary nail,effectively reducing the fluoroscopy frequency and surgical time by improving the success rate of the guide wire insertion with one shot,improving surgical efficiency,and possessing certain clinical value.

As the National Health Commission changes the management of novel corona virus infection, the situation and preventive policies for controlling the epidemic have also entered a new stage in China. Perioperative care strategies for orthopedic trauma such as designated isolation and nucleic acid test screening have also been adjusted in the new stage. Based on the perioperative work experiences in the new stage of epidemic from the frontline anti-epidemic staff of orthopedics in domestic hospitals and combined with the literature and relevant evidence-based medical data in perioperative care of orthopedic trauma patients under the current anti-epidemic policies at home and abroad, Chinese Orthopedic Association and Chinese Society of Traumatology organized relevant experts to formulate the Guideline for clinical perioperative care of orthopedic trauma patients in the new stage of novel corona virus infection ( version 2023). The guideline summarized 16 recommendations from the aspects of preoperative diagnosis and treatment, infection prevention, emergency operation and postoperative management to systematically standardize the perioperative clinical pathways, diagnosis and treatment processes of orthopedic trauma in the new stage of novel corona virus infection, so as to provide a guidance and reference for hospitals at all levels to carry out relevant work in current epidemic control policies.

Chronic refractory wound (CRW) is one of the most challengeable issues in clinic due to complex pathogenesis, long course of disease and poor prognosis. Experts need to conduct systematic summary for the diagnosis and treatment of CRW due to complex pathogenesis and poor prognosis, and standard guidelines for the diagnosis and treatment of CRW should be created. The Guideline forthe diagnosis and treatment of chronic refractory wounds in orthopedic trauma patients ( version 2023) was created by the expert group organized by the Chinese Association of Orthopedic Surgeons, Chinese Orthopedic Association, Chinese Society of Traumatology, and Trauma Orthopedics and Multiple Traumatology Group of Emergency Resuscitation Committee of Chinese Medical Doctor Association after the clinical problems were chosen based on demand-driven principles and principles of evidence-based medicine. The guideline systematically elaborated CRW from aspects of the epidemiology, diagnosis, treatment, postoperative management, complication prevention and comorbidity management, and rehabilitation and health education, and 9 recommendations were finally proposed to provide a reliable clinical reference for the diagnosis and treatment of CRW.

The life safety and quality of life of elderly patients with hip fractures face great threat due to the particularity of fracture site. Elderly patients with hip fracture are often complicated with a variety of basic medical diseases, thus the perioperative management and comprehensive treatment are relatively complex and diverse, and surgical treatment is only one of the links. With the deepening understanding of senile hip fractures, we increasingly realized that the comprehensive management of senile hip fractures should focus on prevention. Combined with the conception and connotation of tertiary-prevention in preventive medicine, this review summarize the common etiology and preventive measures of senile hip fractures, the application of intelligent devices for fall prevention and monitoring, the green channel for hip fracture patient admission, the management mode of the comprehensive geriatric ward based on multi-disciplinary team, the evolution of surgical methods, and the perioperative comprehensive treatments, which in order to provide reference for medical and health workers to reduce the incidence and improve the treatment effects and prognosis of the senile hip fracture via multifaceted and systematic prevention and treatment measures.

Lower extremity deep vein thrombosis (DVT) is one of the main complications in patients with traumatic fractures, and for severe patients, the DVT can even affect arterial blood supply, resulting in insufficient limb blood supply. If the thrombus breaks off, pulmonary embolism may occur, with a high mortality. The treatment and rehabilitation strategies of thrombosis in patients with lower extremity fractures have its particularity. DVT in traumatic fractures patients has attracted extensive attention and been largely studied, and the measures for prevention and treatment of DVT are constantly developing. In recent years, a series of thrombosis prevention and treatment guidelines have been updated at home and abroad, but there are still many doubts about the prevention and treatment of DVT in patients with different traumatic fractures. Accordingly, on the basis of summarizing the latest evidence-based medical evidence at home and abroad and the clinical experience of the majority of experts, the authors summarize the clinical treatment and prevention protocols for DVT in patients with traumatic fractures, and make this consensus on the examination and assessment, treatment, prevention and preventive measures for DVT in patients with different fractures so as to provide a practicable approach suitable for China ′s national conditions and improve the prognosis and the life quality of patients.

Objective:To investigate the application effects of SBAR communication mode (situation, background, assessment and recommendation) combined with 3D printing model technology in bed-side teaching of trauma orthopaedics.Methods:A total of 80 clinical medicine students were randomly divided into two groups according to the order of the school number, with 40 students in each group. One was experimental group which received SBAR communication mode combined with 3D printing model technology teaching, and the other one was the control group, which received regular reaching mode. At the end of teaching, the teaching effects were evaluated, including the scores of theoretical examinations and operational examinations, total scores and the anonymous questionnaires. SPSS 22.0 was used for recording and statistical analysis.Results:The average scores of theoretical examinations (48.30±1.41), operational examinations (42.20±1.48) and total scores (90.70±1.38) of experimental group were significantly higher than those of control group [(43.40±1.52); (34.80±1.53); (78.10±1.51)], with significant differences ( P <0.05). The anonymous questionnaires showed that the students in the experimental group had a significant advantage in autonomous learning ability, learning enthusiasm, the ability of literature retrieval and analysis and clinical thinking ability, and enhancing students' humanistic care consciousness in clinical work ( P <0.05). While the two groups had the same recognition in improving problem solving ability, teamwork ability and communication ability with patients, with no significant difference ( P > 0.05). Conclusion:The new teaching mode, SBAR mode combined with 3D printing model technology, applied to trauma orthopaedics bed-side teaching is helpful for students to improve their learning interest and autonomous learning ability, cultivate their lifelong learning habits and their comprehensive quality, so this mode will significantly improve the teaching effects, with good application value.

With the spread of novel coronavirus pneumonia (NCP) in December 2019, the management and rehabilitation of elderly patients with hip fractures and protection of medical staff face new challenges, and need to be adjusted appropriately under this very circumstances. Hip fractures in the elderly account for more than half of osteoporotic fractures. Expert group formulate this consensus so as to make better decision against this epidemic and protect patients' families and medical staff. This consensus elaborates not only epidemic condition of NCP, but also general principles of medical admission, treatment and protection for both medical staff and patients, in order to provide some reference and promote the standardization of clinical diagnosis and treatment of elderly patients with hip fractures under the condition of NCP.

Since December 2019, novel coronavirus pneumonia (NCP) has been reported in Wuhan, Hubei Province, and spreads rapidly to all through Hubei Province and even to the whole country. The virus is 2019 novel coronavirus (2019-nCoV), never been seen previously in human, but all the population is generally susceptible. The virus spreads through many ways and is highly infectious, which brings great difficulties to the prevention and control of NCP. Based on the needs of orthopedic trauma patients for emergency surgery and review of the latest NCP diagnosis and treatment strategy and the latest principles and principles of evidence-based medicine in traumatic orthopedics, the authors put forward this expert consensus to systematically standardize the clinical pathway and protective measures of emergency surgery for orthopedic trauma patients during prevention and control of NCP and provide reference for the emergency surgical treatment of orthopedic trauma patients in hospitals at all levels.

With the outbreak of novel coronavirus pneumonia (NCP) induced by 2019 novel coronavirus (2019-nCoV) in Wuhan, Hubei Province in December 2019, more and more suspected or confirmed cases have been found in various regions of China. Although China has adopted unprecedented strict quarantine and closed management measures to prevent the spreading of the disease, Department of Traumatic Orthopedics may still have to manage NCP patients with open fractures or severe trauma that require emergency surgery. Therefore, the identification and management of 2019-nCoV infection as soon as possible as well as the protection of all medical staff involved in the emergency treatment of patients are the severe challenges faced by orthopedic traumatologists during the prevention and control of NCP. Based on the characteristics of such patients and related diagnosis and treatment experiences during the epidemic of NCP, the authors formulate the surgical management strategies for orthopedic trauma patients.