This case report presents an 81-year-old edentulous female patient with congenital cleft lip and palate, rehabilitated with a maxillary obturator and a mandibular complete denture. A defect in the hard palate causes nasal leakage and hypernasalization of speech. Velopharyngeal insufficiency due to a defect in the soft palate causes reflux during swallowing and decreased clarity of pronunciation.The anatomical structures, such as Passavant’s ridge, were considered to prevent respiratory problems when impression taking. We achieved satisfactory results including velopharyngeal closure for pronunciation, mastication, and swallowing, as well as improved aesthetics. Therefore, we report the process and considerations of the treatment.

This case report presents an 81-year-old edentulous female patient with congenital cleft lip and palate, rehabilitated with a maxillary obturator and a mandibular complete denture. A defect in the hard palate causes nasal leakage and hypernasalization of speech. Velopharyngeal insufficiency due to a defect in the soft palate causes reflux during swallowing and decreased clarity of pronunciation.The anatomical structures, such as Passavant’s ridge, were considered to prevent respiratory problems when impression taking. We achieved satisfactory results including velopharyngeal closure for pronunciation, mastication, and swallowing, as well as improved aesthetics. Therefore, we report the process and considerations of the treatment.

This case report presents an 81-year-old edentulous female patient with congenital cleft lip and palate, rehabilitated with a maxillary obturator and a mandibular complete denture. A defect in the hard palate causes nasal leakage and hypernasalization of speech. Velopharyngeal insufficiency due to a defect in the soft palate causes reflux during swallowing and decreased clarity of pronunciation.The anatomical structures, such as Passavant’s ridge, were considered to prevent respiratory problems when impression taking. We achieved satisfactory results including velopharyngeal closure for pronunciation, mastication, and swallowing, as well as improved aesthetics. Therefore, we report the process and considerations of the treatment.

This case report presents an 81-year-old edentulous female patient with congenital cleft lip and palate, rehabilitated with a maxillary obturator and a mandibular complete denture. A defect in the hard palate causes nasal leakage and hypernasalization of speech. Velopharyngeal insufficiency due to a defect in the soft palate causes reflux during swallowing and decreased clarity of pronunciation.The anatomical structures, such as Passavant’s ridge, were considered to prevent respiratory problems when impression taking. We achieved satisfactory results including velopharyngeal closure for pronunciation, mastication, and swallowing, as well as improved aesthetics. Therefore, we report the process and considerations of the treatment.

This case report presents an 81-year-old edentulous female patient with congenital cleft lip and palate, rehabilitated with a maxillary obturator and a mandibular complete denture. A defect in the hard palate causes nasal leakage and hypernasalization of speech. Velopharyngeal insufficiency due to a defect in the soft palate causes reflux during swallowing and decreased clarity of pronunciation.The anatomical structures, such as Passavant’s ridge, were considered to prevent respiratory problems when impression taking. We achieved satisfactory results including velopharyngeal closure for pronunciation, mastication, and swallowing, as well as improved aesthetics. Therefore, we report the process and considerations of the treatment.

In patients with severe alveolar bone resorption on mandibular anterior edentulous areas, it can be difficult to place implants in the location for crowns, and to create the fixed prosthesis having an adequate emergence profile or embrasure, which makes maintenance difficult. Fabricating a removable zirconia prosthesis with a milled bar on poorly positioned implants can be a good option because of easy maintenance. In this case, the patient had severe bone resorption on mandibular anterior region, and large vertical space. We report on the aesthetical and easy-to-maintain results by placing two implants and fabricating a zirconia prosthesis using milled bar.

In patients with unstable mandibular movements who are accompanied by involuntary facial muscle movements and asymmetrical changes in the facial features, many difficulties exist in determining the vertical dimension of occlusion, recording centric relation, and transferring information about the occlusal plane. In this case, for a patient with unilateral facial nerve palsy who was edentulous for a long period of time, a CAD-CAM provisional prosthesis was fabricated using a 3D printing customized gothic arch tracer and a prefabricated occlusal plane recorder, the POP bow system, to achieve a stable interarch relationship. Afterwards, a full mouth implant fixed prosthesis was fabricated by delivering an appropriate vertical dimension of occlusion, a reproducible centric relation, and a correct three-dimensional occlusal plane, and continuous maintenance was performed to restore functional and aesthetic oral health to the patient.

PURPOSE: . This study aims to clinically compare the fitness and trueness of zirconia crowns fabricated by different combinations of open CAD-CAM systems. MATERIALS AND METHODS: . Total of 40 patients were enrolled in this study, and 9 different zirconia crowns were prepared per patient. Each crown was made through the cross-application of 3 different design software (EZIS VR, 3Shape Dental System, Exocad) with 3 different processing devices (Aegis HM, Trione Z, Motion 2). The marginal gap, absolute marginal discrepancy, internal gap(axial, line angle, occlusal) by a silicone replica technique were measured to compare the fit of the crown. The scanned inner and outer surfaces of the crowns were compared to CAD data using 3D metrology software to evaluate trueness. RESULTS: . There were significant differences in the marginal gap, absolute marginal discrepancy, axial and line angle internal gap among the groups (P < .05) in the comparison of fit. There was no statistically significant difference among the groups in terms of occlusal internal gap. The trueness ranged from 36.19 to 43.78 μm but there was no statistically significant difference within the groups (P > .05). CONCLUSION . All 9 groups showed clinically acceptable level of marginal gaps ranging from 74.26 to 112.20 μm in terms of fit comparison. In the comparison of trueness, no significant difference within each group was spotted. Within the limitation of this study, open CAD-CAM systems used in this study can be assembled properly to fabricate zirconia crown. [J Adv Prosthodont 2023;15:155-70]

PURPOSE: . This in vitro study aimed to compare the accuracy of the conventional facebow system and the newly developed POP (PNUD (Pusan National University Dental School) Occlusal Plane) bow system for occlusal plane transfer in asymmetric ear position. MATERIALS AND METHODS: . Two dentists participated in this study, one was categorized as Experimenter 1 and the other as Experimenter 2 based on their clinical experience with the facebow (1F, 2F) and POP bow (1P, 2P) systems. The vertical height difference between the two ears of the phantom model was set to 3 mm. Experimenter 1 and Experimenter 2performed the facebow and POP bow systems on the phantom model 10 times each, and the transfer accuracy was analyzed. The accuracy was evaluated by measuring the angle between the reference virtual plane (RVP) of the phantom model and the experimental virtual plane (EVP) of the upper mounting plate through digital superimposition. All data were statistically analyzed using a paired t-test (P < .05). RESULTS: . Regardless of clinical experience, the POP bow system (0.53° ± 0.30 (1P) and 0.19° ± 0.18 (2P) for Experimenter 1 and 2, respectively) was significantly more accurate than the facebow system (1.88° ± 0.50 (1F) and 1.34° ± 0.25 (2F), respectively) in the frontal view (P < .05). In the sagittal view, no significant differences were found between the POP bow system (0.92° ± 0.50 (1P) and 0.73° ± 0.42 (2P) for Experimenter 1 and 2, respectively) and the facebow system (0.82° ± 0.49 (1F) and 0.60° ± 0.39 (2F), respectively), regardless of clinical experience (P > .05). CONCLUSION . In cases of asymmetric ear position, the POP bow system may transfer occlusal plane information more accurately than the facebow system in the frontal view, regardless of clinical experience.

In order to manufacture functional and esthetic prostheses, it is essential to accurately transmit information about the patient’s occlusal plane. In particular, in the case of a completely edentulous patient, the occlusal plane is very important to correctly support the soft tissue, to achieve aesthetic harmony with the facial appearance, and to properly pronounce it, and to form a balanced occlusal relationship for stable mastication. In the conventional method, various facebow systems were used to transmit patient’s information from the clinic to the laboratory, but there were several limitations in the process of transferring them to CAD. To simplify this process, a prefabricated POP (PNUD Occlusal Plane) Bow system was recently developed. In this case, a CAD-CAM (Computer-aided design-computer-aided manufacturing) treatment dentures reflecting the patient’s occlusal plane information was manufactured using the POP Bow system during the treatment of a completely edentulous patient, and aesthetic and functional satisfaction was obtained.