Objective To analyze the factors influencing the occupational health literacy (OHL) level among workers in key industries from the perspectives of both individual workers and enterprises. Methods A total of 32 336 front-line workers from 12 key industries in the secondary industry in Guangdong Province were selected as the research subjects by a stratified cluster random sampling method. Their OHL level was investigated using Occupational Health Literacy Questionnaire of National Key Populations, and the influencing factors were analyzed. Results The OHL level of the research subjects was 48.5%. The OHL level of the research subjects in four dimensions from high to low was basic knowledge of occupational health protection, occupational health practice and behavior, legal knowledge of occupational health, and basic skills of occupational health protection (80.7%, 61.2%, 48.3% and 29.5%, respectively). The multivariable logistic regression analysis showed that the OHL level of female workers was lower than that of males (P<0.05). Lower OHL was also associated with older age, lower education level, lower personal monthly income of workers (all P<0.01). The workers with length of service < 3 years and ≥ 20 years had lower OHL level than those with length of service 3-<10 years and 10-<20 years, respectively (all P<0.05). Workers in larger enterprises had higher OHL levels (all P<0.01). The OHL level of workers in the sixth category of industries with occupational injuries had higher occupational injury risks than those in the third and fourth categories (all P<0.05). The OHL levels of workers in state-owned enterprises, private enterprises, foreign-funded enterprises, and other enterprises were higher than that of workers in public institutions (all P<0.05). Conclusion The influencing factors of workers′ OHL in key industries of the secondary industry include individual factors (gender, age, education level, personal monthly income, length of service) and enterprise factors (enterprise size, enterprise nature and industry injury risk category). Female, older workers, those with lower education or income, and those with short length of service represent priority groups for OHL interventions, while small and micro enterprises are priority units for future workplace health promotion intervention.

Surgical operation is the main treatment of oral and maxillofacial tumors.Dysphagia is a common postoperative complication.Swal-lowing disorder can not only lead to mis-aspiration,malnutrition,aspiration pneumonia and other serious consequences,but also may cause psychological problems and social communication barriers,affecting the quality of life of the patients.At present,there is no systematic evalua-tion and rehabilitation management plan for the problem of swallowing disorder after oral and maxillofacial tumor surgery in China.Combining the characteristics of postoperative swallowing disorder in patients with oral and maxillofacial tumors,summarizing the clinical experience of ex-perts in the field of tumor and rehabilitation,reviewing and summarizing relevant literature at home and abroad,and through joint discussion and modification,a group of national experts reached this consensus including the core contents of the screening of swallowing disorders,the phased assessment of prognosis and complications,and the implementation plan of comprehensive management such as nutrition management,respiratory management,swallowing function recovery,psychology and nursing during rehabilitation treatment,in order to improve the evalua-tion and rehabilitation of swallowing disorder after oral and maxillofacial tumor surgery in clinic.

A major impedance to neuronal regeneration after peripheral nerve injury(PNI)is the activation of various programmed cell death mechanisms in the dorsal root ganglion.Ferroptosis is a form of pro-grammed cell death distinguished by imbalance in iron and thiol metabolism,leading to lethal lipid peroxidation.However,the molecular mechanisms of ferroptosis in the context of PNI and nerve regeneration remain unclear.Ferroportin(Fpn),the only known mammalian nonheme iron export protein,plays a pivotal part in inhibiting ferroptosis by maintaining intracellular iron homeostasis.Here,we explored in vitro and in vivo the involvement of Fpn in neuronal ferroptosis.We first delineated that reactive oxygen species at the injury site induces neuronal ferroptosis by increasing intracellular iron via accelerated UBA52-driven ubiquitination and degradation of Fpn,and stimulation of lipid peroxidation.Early administration of the potent arterial vasodilator,hydralazine(HYD),decreases the ubiquitination of Fpn after PNI by binding to UBA52,leading to suppression of neuronal cell death and significant ac-celeration of axon regeneration and motor function recovery.HYD targeting of ferroptosis is a promising strategy for clinical management of PNI.

ObjectiveTo analyze the current occupational health literacy (OHL) level and its influencing factors among drivers in transportation industry. Methods A total of 880 drivers of taxi companies, passenger transport companies, freight companies and online booking companies were selected as the research subjects using the judgment sampling method. The Occupational Health Literacy Questionnaire of National Key Populations was used to conduct a survey on their OHL levels via online questionnaires, and the influencing factors of OHL were analyzed. Results The OHL level of the research subjects was 54.32% (478/880). The OHL levels in the dimensions of occupational health legal knowledge, basic knowledge of occupational health protection, basic skills of occupational health protection, healthy working style and behavior were 55.34%, 79.55%, 58.30% and 46.25%, respectively. The results of the multivariate logistic regression analysis showed that the OHL levels of drivers in passenger transport and freight companies were higher than that in taxi companies (all P<0.01). The OHL levels of drivers in private enterprises, foreign-funded enterprises, and other enterprises were lower than those in state-owned enterprises (all P<0.05). The OHL levels of drivers in large enterprises were lower than that of drivers in micro-enterprises (P<0.05). The OHL levels of drivers worked >5-10 years and >10 years were lower than that of drivers working 1-5 years (all P<0.05). Conclusion There is a considerable room for improvement in the OHL levels of drivers in the transportation industry. The category, economic type, and scale of the employing unit and driving work year of the current position are the main influencing factors of OHL levels.

Objective To analyze the epidemiological characteristics of occupational hand-arm vibration disease (OHAVD) in Guangdong Province from 2006 to 2022. Methods The data of newly reported OHAVD cases and suspected occupational disease cases in Guangdong Province from 2006 to 2022 was collected from the Report Card of Occupational Diseases and Report Card of Suspected Occupational Diseases using Occupational Diseases and Health Hazard Factors Monitoring Information System under China Disease Prevention and Control Information System. Epidemiological characteristics of the newly reported OHAVD cases and related suspected occupational disease reports were analyzed. Results A total of 660 newly reported OHAVD cases were reported in Guangdong Province from 2006 to 2022. The number of cases showed a periodic fluctuating trend over the years. Males accounted for 98.64% of the newly reported OHAVD cases with a median age of 38 years and a median hand-transmitted vibration exposure period of 8.7 years. These cases were predominantly distributed in the Pearl River Delta region, including Zhongshan City, Dongguan City, Guangzhou City, Shenzhen City and Foshan City, accounting for 99.25%. The manufacturing enterprises had 98.79% of the cases, investment enterprises of Hong Kong, Macao and Taiwan merchants of China had 83.18% of the cases, and large- and medium-sized enterprises had 92.73% of the cases. The 660 cases were distributed in 440 enterprises, but there were some characteristics of group outbreaks. There were 20 enterprises (4.55% of the total number of enterprises) had more than three cases involving 219 cases (33.18%). There were five enterprises which had more than 10 cases and the cases number ranged from 12 to 56. Among 382 newly reported OHAVD cases from 2014 to 2022, 44.24% were identified as suspected occupational diseases before diagnosis, of which 59.76% (101/169) were determined by occupational health inspection institutions. Conclusion Newly reported OHAVD cases in Guangdong Province were aggregated in terms of regional distribution, industry, enterprise ownership, and enterprise scale, with a risk of group outbreaks. It is suggested to enhance the OHAVD prevention and control in male workers exposed to hand-transmitted vibrations in the Pearl River Delta's manufacturing enterprises.

Objective To investigate the independent risk factors of comprehensive complication index(CCI)≥26.2 after radical resection of colon cancer,and use these factors to establish and verify a dynamic web-based nomogram model.Methods The clinical data of colon cancer patients who underwent radical resection in the Affiliated Hospital of Jiangnan University from November 2020 to April 2022 were retrospectively collected,and divided into main cohort(November 2020 to October 2021,n=438)and validation cohort(November 2021 to April 2022,n=196).CCI scores of all patients were obtained based on CCI calculator(http://www.assessurgery.com).Univariate and multivariate logistic regression analysis were performed to identify the risk factors for CCI≥26.2,and a nomogram model was constructed.Receiver operator characteristic curve(ROC),C index and calibration curve were used to evaluate the differentiation and consistency of predictive nomogram model,and the decision curve analysis was conducted to assess the clinical benefits of the model.Internal validation of the model is performed in the validation cohort.Results A total of 438 patients were identified in present study,of which 63 cases(14.4%)had CCI≥26.2.Multivariate logistic regression analysis revealed that age≥60 years(OR=2.662,95%CI 1.341-5.285,P=0.005),low third lumbar spine skeletal muscle mass index(L3MI;OR=4.572,95%CI 2.435-8.583,P<0.001),NRS2002≥3(OR=4.281,95%CI 2.304-7.952,P<0.001),and preoperative bowel obstruction(OR=3.785,95%CI 1.971-7.268,P<0.001)were significant independent risk factors for postoperative CCI≥26.2.Based on these results,a static and web-based dynamic nomogram was established(https://jndxfsyywcwksyf.shinyapps.io/DynNomCCI/).The C-index and area under the curve(AUC)of the nomogram were 0.742 and 0.787,respectively.The calibration curve indicated a good consistency between the predicted probability and the actual probability.In the validation cohort,the nomogram also presented good discrimination(C-index=0.722,AUC=0.795)and predictive consistency.The decision curve analysis indicated the clinical benefit and application value of the nomogram prediction model.Conclusion This easy-to-use dynamic nomogram based on 4 independent risk factors can conveniently and reliably predict the probability of CCI≥26.2 after radical resection of colon cancer,which helps optimize the preoperative evaluation system,formulate precise individualized treatment strategies,and enhance recovery after surgery.

Objective To evaluate the difference in dose distribution calculated using X-ray voxel Monte Carlo(XVMC)algorithm and ArcherQA Monte Carlo(MC)algorithm in preoperative radiotherapy for rectal cancer,thus providing reference for the planning and evaluation of XVMC algorithm in clinical practice.Methods For 10 patients with rectal cancer undergoing preoperative radiotherapy,the XVMC algorithm in MONACO planning system was used to develop the plan.The CT,tissue structure,and field information from the prepared plan were transmitted to Monte Carlo software,and the MC algorithm was used for the secondary dose calculation.The dose differences between XVMC algorithm and MC algorithm in the target area and organs-at-risk dose calculations were analyzed.Results The differences in Dmin and Dmean of the planning target volume(PTV),V40 of the small intestine,V45 and Dmean of the bladder,and Dmeanof the femoral head calculated by XVMC and MC algorithms for isocenter dose were all within 2%.The differences in the Dmax of PTV,spinal cord expansion,and small intestine between two algorithms were 3.43%,3.59%,and 3.62%,respectively;and the difference in the V5040 of PTV was 2.87%.Conclusion XVMC algorithm underestimates the planned maximum dose and overestimates the prescription dose coverage in the target area as compared with MC algorithm,but the dosimetric differences between the two algorithms are within a clinically acceptable range(within 5%).When evaluating the plan,attention should be paid to the dose calculation errors caused by the algorithm.

Objective:A novel anatomic posterior malleolus locking plate for Chinese people was designed, researched, developed, and tested biomechanically.Methods:An anatomic parameter database of posterior malleolus of Chinese people was established by collecting CT images of ankle joints from 100 healthy volunteers in Shanghai Tongji hospital from June 2022 to May 2023. Combined with relevant computer-aided technologies, a novel anatomic posterior malleolus locking plate for Chinese people was designed and produced. In addition, model verification and biomechanical test were carried out on vertical displacements under different fixation modes and different axial loads (500, 1 000, and 1 500 N). Failure loads at a displacement of 2 mm and maximum failure loads at the complete failure of internal fixation were also tested and recorded.Results:Based on the imaging anatomic measurement, the width quartile of posterior malleolus was 19.4, 26.6, 35.0 mm. The 3D reconstruction models of ankle joint CT corresponded to small, medium, and large basic posterior malleolus plates. Height of the screw safety zone was 5.5(5.3, 5.7) mm. The tip-back angle was 153.0°(148.5°, 157.5°) and tip-back height was 20.0(19.7, 20.9) mm. The novel anatomic posterior malleolus locking plate based on tibiofibular and ankle joint CT scan and relevant computer-aided technologies fit well with posterior malleolus of tibia, showing anatomic fitting. Based on the associate biomechanical test, the novel plate fixation had smaller vertical displacements of posterior malleolus fragment under axial loads of 500, 1 000, and 1 500 N compared with the control plate, but greater failure loads when the vertical displacement of the posterior malleolus fragment was 2 mm and greater maximum failure loads at complete failure of the internal fixation. At an axial load of 500 N, the vertical displacements of the posterior malleolus fragment after posterior malleolus fixation with a control plate, a 6-hole anatomical locking plate, and a 5-hole anatomical locking plate were 0.60±0.02, 0.45±0.04, and 0.52±0.04 mm, respectively with significant difference ( F=88.287, P<0.001); at an axial load of 1 000 N, the vertical displacements were 2.22±0.03, 1.10±0.03, and 1.15±0.03 mm for the three fixation modes, respectively, and the difference was statistically significant ( F=10 061.890, P<0.001); At an axial load of 1 500 N, the vertical displacements were 2.81±0.04, 1.50±0.03 and 1.67±0.03 mm for the three fixation modes, respectively with significant difference ( F=9 774.019, P<0.001). When the vertical displacement of the posterior malleolus fragment was 2 mm, the failure loads for the three fixation modes were 0.80(0.73, 0.80)、2.00(1.93, 2.00) and 1.70(1.70, 1.70) kN, respectively with significant differences ( H=54.245, P<0.001). The maximum failure loads at complete failure of the internal fixation for the three fixation modes were 1.90(1.90, 1.98)、4.30(4.30, 4.30) and 3.70(3.63, 3.70) kN, respectively with significant differences ( H=53.863, P<0.001). Conclusions:The novel anatomic posterior malleolus locking plate for Chinese people was well matched to the posterior malleolus with high mechanical strength and good stability, showing a promising future for clinical application.

AIM:This study examined the inhibitory effect of peiminine on the human colonic adenocarcino-ma cell line SW480 and explored the underlying mechanisms.METHODS:SW480 and human normal colonic epithelial CCD-841CoN cells were treated with different concentrations of peiminine and subjected to the CCK-8 assay to select the optimal treatment time and concentration of the compound.SW480 cell migration and invasion were evaluated by the wound-healing and Transwell assays.Cell cycle progression was analyzed by flow cytometry.The expression levels of cell cycle-related proteins were examined by Western blot.SW480 xenograft tumor model was established in nude mice to ex-amine the effect of peiminine on tumor growth and the expression of cell cycle-related proteins in vivo.RESULTS:Peimi-nine(110 mg/L)significantly inhibited the proliferation of SW480 cells compared with the control group(P<0.01),caused cell cycle arrest at G1 phase,and significantly downregulated the expression of cyclin dependent kinase 2(CDK2),CDK4,CDK6,cyclin D1,p-Rb/Rb,E2F1,E2F3,and E2F4(P<0.05).Peiminine inhibited SW480 xenograft tumor growth,prolonged the survival of model mice,and affected the expression of CDK2,CDK4,CDK6,and cyclin D1 in tu-mor tissues.CONCLUSION:Peiminine promotes G1 phase arrest by down-regulating the expression of CDK2,CDK4,CDK6,and cyclin D1,thereby inhibiting the proliferation of SW480 cells.

OBJECTIVE: To establish the finite element model of varus-type ankle arthritis and to implement the finite element mechanical analysis of different correction models for tibial anterior surface angle (TAS) in supramalleolar osteotomy. METHODS: A female patient with left varus-type ankle arthritis (Takakura stage Ⅱ, TAS 78°) was taken as the study object. Based on the CT data, the three-dimensional model of varus-type ankle arthritis (TAS 78°) and different TAS correction models [normal (TAS 89°), 5° valgus (TAS 94°), and 10° valgus (TAS 99°)] were created by software Mimics 21.0, Geomagic Wrap 2021, Solidworks 2017, and Workbench 17.0. The 290 N vertical downward force was applied to the upper surface of the tibia and 60 N vertical downward force to the upper surface of the fibula. Von Mises stress distribution and stress peak were calculated. RESULTS: The finite element model of normal TAS was basically consistent with biomechanics of the foot. According to biomechanical analysis, the maximum stress of the varus model appeared in the medial tibiotalar joint surface and the medial part of the top tibiotalar joint surface. The stress distribution of talofibular joint surface and the lateral part of the top tibiotalar joint surface were uniform. In the normal model, the stress distributions of the talofibular joint surface and the tibiotalar joint surface were uniform, and no obvious stress concentration was observed. The maximum stress in the 5° valgus model appeared at the posterior part of the talofibular joint surface and the lateral part of the top tibiotalar joint surface. The stress distribution of medial tibiotalar joint surface was uniform. The maximum stress of the 10° valgus model appeared at the posterior part of the talofibular joint surface and the lateral part of the top tibiotalar joint surface. The stress on the medial tibiotalar joint surface increased. CONCLUSION With the increase of valgus, the stress of ankle joint gradually shift outwards, and the stress concentration tends to appear. There was no obvious obstruction of fibula with 10° TAS correction. However, when TAS correction exceeds 10° and continues to increase, the obstruction effect of fibula becomes increasingly significant.
Humans ; Female ; Tibia/surgery* ; Finite Element Analysis ; Ankle ; Arthritis ; Fibula/surgery* ; Ankle Joint/surgery*