OBJECTIVES: This study aimed to construct the finite element model of the mandibular first molar with the invisible appliance and explore the dentition movement characteristics of the mandibular first molar when using micro-implant anchorage and different initial positions of the first molar. METHODS: Models of the mandible, tooth, periodontal membrane, and invisible appliance were constructed using cone beam computed tomography (CBCT) data. The two groups were divided into the non-anchorage group and the micro-implant group (between the roots of the first molar and the second molar) based on whether the elastic traction of the micro-implant was assisted or not. The two groups were divided into the following conditions based on the starting position of the first molar: Working condition 1: the distance between the first molar and the second premolar was 0 mm; working condition 2: the distance between the first molar and the second premolar was 1 mm; working condition 3: the distance between the first molar and the second premolar was 2 mm; working condition 4: the distance between the first molar and the second premolar was 3 mm. The data characte-ristics of total displacement and displacement in each direction of dentition were analyzed. RESULTS: In the non-ancho-rage group, all the other teeth showed reverse movement except for the first molar which was moved distally. Meanwhile, in the micro-implant group, except for a small amount of mesial movement of the second molar in wor-king condition 1, the whole dentition in other working conditions presented distal movement and anterior teeth showed lingual movement, among which the distal displacement of the first molar in working condition 4 was the largest. With the change of the initial position of the first molar to the distal, the movement of the first molar to the distal, the premolar to the mesial, and the anterior to the lip increased, while the movement of the second molar to the mesial decreased. CONCLUSIONS The micro-implant can effectively protect the anterior anchorage, increase the expression rate of molar distancing, and avoid the round-trip movement of the second molar. The initial position of the first molar movement is related to the amount of distancing and the remaining tooth movement.
Finite Element Analysis ; Molar ; Bicuspid ; Periodontal Ligament ; Tooth Movement Techniques/methods* ; Orthodontic Appliances, Removable

OBJECTIVES: This study aimed to explore the stress distribution of surface-mounted inlays with two ceramic materials and different strategies for fiber post-restoration on pulp-penetrating non-carious cervical lesion in a maxillary first premolar to provide minimally invasive and reasonable restorative methods. METHODS: The cone beam computed tomography data of the standard right upper first premolar were selected. Healthy control (HC) and defective control (DC) finite element models were established. Then, eight experimental models were established according to two different ceramic materials (IPS e.max CAD [LD] and Lava Ultimate [LU]) and different locations of fiber post (without fiber post [NP], fiber post in buccal root canal [B], fiber post in palatal root canal [P], fiber post in both root canals [BP]), namely, LD_NP, LD_B, LD_P, LD_BP, LU_NP, LU_B, LU_P, and LU_BP. Axial load F1 and lateral load F2 were applied. Maximum principal stress and displacement of the buccal tip were investigated using finite element analysis software. Then, the percentage change of the following indicators in each experimental group was analyzed: stress of defective tip with group DC, stress of enamel and dentine, and displacement of buccal tips with group HC. It was considered similar when the percentage change was less than 5%. RESULTS: LD and LU groups could effectively reduce the stress of the defective tip, but the decreasing amplitude in the former was greater than that of the latter. For the stress of surface-mounted inlays and resin adhesive layer, LD groups were higher than LU groups, and no significant difference in stress peak was found among different experimental groups in the same material. In addition, fiber posts in double root canals could significantly reduce buccal tip displacement. CONCLUSIONS For pulp-penetrating non-carious cervical lesions, the restorative strategy of surface-mounted inlays could be applied. Compared with Lava Ultimate, IPS e.max CAD could better protect the defective tip tooth. Furthermore, fiber posts in double root canals could decrease overall deformation and increase the retention of surface-mounted inlays.
Inlays ; Finite Element Analysis ; Composite Resins ; Bicuspid ; Ceramics ; Dental Stress Analysis

OBJECTIVES: This study aimed to remove occlusal veneers of varied thicknesses and compositions by Er:Yag laser in vitro and analyze the interfacial microstructure between veneers and tooth that irradiated by laser, by which experimental evidence could be provided to support the non-invasive removal of occlusal veneerby laser. METHODS: Fresh mandibular premolars extracted for orthodontic requirements were collected for tooth preparation. Three kinds of ceramic materials (Vita Suprinity, Vita Mark Ⅱ, and Upcera Hyramic) were selected to fabricate occlusal veneer with different thicknesses (1.0, 1.5, and 2.0 mm). One week later, Er:Yag laser (2.5 W and 3.5 W) was used to irradiate and remove the occlusal veneer and recorded the timespan. After the removal operation, the micro-morphologies of samples were examined by scanning electron microscope. RESULTS: Upcera Hyramic veneer failed to be removed (>20 min); the operation span at 2.5 W, Vita Suprinity (96.0 s±16.0 s) was longer than Vita MarkⅡ(84.5 s±19.5 s) in the 1.0 mm group (P<0.05), and Vita Suprinity (246.5 s±13.5 s) was longer than Vita MarkⅡ(170.0 s±14.0 s) in the 1.5 mm group (P<0.05). At 3.5 W, Vita Suprinity (381.0 s±24.0 s) was longer than Vita MarkⅡ(341.5 s±26.5 s) in the 2.0 mm group. CONCLUSIONS Increasing laser power could shorten the operation span and facilitate the removal of occlusal veneers with the same thickness and composition. The occlusal veneer was sustained when insufficient laser power was applied. With the same laser power and ceramic thickness, laser penetration could interfere with the integral of the ceramic structure when the laser interacted with the bonding layer. With the same ceramic composition and laser power, the operation span and laser power increased with the thickness of the occlusal veneer. However, the laser was incapable of removing occlusal resin veneer directly.
Lasers, Solid-State ; Materials Testing ; Dental Porcelain/chemistry* ; Ceramics/chemistry* ; Bicuspid ; Dental Veneers

It is a basic prerequisite for the successful completion of endodontic treatment to thoroughly understand the root canal space anatomy. With the development of dental devices in dentistry, the root canal morphology of the mandibular first premolars can be presented in more detail. Before conducting root canal therapy on the mandibular first premolar with complex root canal morphology, it should be necessary to evaluate the potential difficulties and risks for making an appropriate treatment plan. The present paper reviews the research progress on the diversities of root canal morphology in mandibular first premolars in recent years, and then makes technologic recommendations based on the morphology diversities.
Humans ; Dental Pulp Cavity/diagnostic imaging* ; Bicuspid/anatomy & histology* ; Mandible ; Tooth Root/anatomy & histology* ; Root Canal Therapy

OBJECTIVE: To investigate the efficacy of vertical control by using conventional mini-implant anchorage in maxillary posterior buccal area for Angle class Ⅱ extraction patients. METHODS: Twenty-eight Angle class Ⅱ patients [9 males, 19 females, and age (22.6±2.8) years] were selected in this study. All of these patients were treated by using straight wire appliance with 4 premolars extraction and 2 mini-implant anchorage in maxillary posterior buccal area. In this study, the self-control method was used to measure and analyze the lateral radiographs taken before and after orthodontic treatment in each case, the main cephalometric analysis items were related to vertical changes. The digitized lateral radiographs were imported into Dolphin Imaging Software (version 11.5: Dolphin Imaging and Management Solutions, Chatsworth, California, USA), and marked points were traced. Each marked point was confirmed by two orthodontists. The same orthodontist performed measurement on the lateral radiographs over a period of time. All measurement items were required to be measured 3 times, and the average value was taken as the final measurement result. RESULTS: Analysis of the cephalometric radiographs showed that, for vertical measurements after treatment, the differences of the following measurements were highly statistically significant (P < 0.001): SN-MP decreased by (1.40±1.45) degrees on average, FMA decreased by (1.58±1.32) degrees on average, the back-to-front height ratio (S-Go/N-Me) decreased by 1.42%±1.43% on average, Y-axis angle decreased by (1.03±0.99) degrees on average, face angle increases by (1.37±1.05) degree on average; The following measurements were statistically significant (P < 0.05): the average depression of the upper molars was (0.68±1.40) mm, and the average depression of the upper anterior teeth was (1.07±1.55) mm. The outcomes indicated that there was a certain degree of upper molar depression after the treatment, which produced a certain degree of counterclockwise rotation of the mandibular plane, resulting in a positive effect on the improvement of the profile. CONCLUSION The conventional micro-implant anchorage in maxillary posterior buccal area has a certain vertical control ability, and can give rise to a certain counterclockwise rotation of the mandible, which would improve the profile of Angle Class Ⅱ patients.
Bicuspid ; Cephalometry/methods* ; Female ; Humans ; Male ; Malocclusion, Angle Class II/therapy* ; Mandible ; Maxilla/diagnostic imaging* ; Orthodontic Anchorage Procedures ; Tooth Movement Techniques ; Vertical Dimension

Objective: To investigate the effects of straight-line minimally invasive access cavity on the mechanical properties of endodontically treated maxillary first premolars using finite element analysis. Methods: Micro-CT data of twenty maxillary first premolars were collected for three-dimensional reconstruction. Three access cavities, including the conventional access cavity (ConvAC), the truss access cavity (TrussAC) and the straight-line minimally invasive access cavity (SMIAC), as well as the root canal treatment procedure, were simulated in all the 20 reconstruction samples of three-dimensional models, respectively. The peak von Mises stress on the cervical area of each model, as well as the stress distribution under vertical and oblique loading circumstances, were subsequently determined by using finite element analysis. Results: In comparison to the stresses of ConvAC [buccal cervical (BC): (188.7±13.4) MPa, palatal cervical (PC): (200.9±25.7) MPa], the stresses of TrussAC [BC: (146.0±12.9) MPa, PC: (167.6±15.9) MPa] (t=9.01, P<0.001; t=4.59, P<0.001) and SMIAC [BC: (142.6±13.7) MPa, PC: (168.1±17.4) MPa] (t=9.64, P<0.001; t=3.76, P=0.004) significantly reduced the peak von Mises stress on the cervical area of the maxillary first premolars after root canal treatment. Under vertical loading conditions, SMIAC also reduced the central tendency of stresses on the occlusal surface, cervical area and root. In the case of oblique loading conditions, similar results were observed. Under both loading conditions, there was no significant difference in the peak von Mises stress on the cervical area of the maxillary first premolar between TrussAC and SMIAC groups. Conclusions: The design of SMIAC could preserve the mechanical properties of the maxillary first premolar following root canal treatment, which might have certain clinical feasibility.
Bicuspid ; Dental Stress Analysis ; Finite Element Analysis ; Root Canal Therapy ; Stress, Mechanical ; X-Ray Microtomography

Objective: To summarize the clinical characteristics of patients with cleidocranial dysplasia (CCD) and analyze their treatment methods. Methods: From January 2000 to December 2020, patients with CCD who completed comprehensive treatment in the Department of Orthodontics and the First Dental Clinic, School and Hospital of Stomatology, China Medical University were retrospectively analyzed. A total of 14 CCD patients [7 males and 7 females, aged (16.1±4.5) years] were collected. There were 153 impacted permanent teeth in this study. In addition to the teeth that needed to be extracted due to special conditions, 147 impacted teeth were pulled into the dentition using closed traction. Patients were divided into adolescent group (≥12 years and<18 years, 10 patients) and adult group (≥18 years, 4 patients). Failure rate of traction was compared between the two groups. Factors affecting the success rate of closed traction such as vertical position of teeth (high, middle and low) and horizontal position of the teeth (palatal, median and buccal) were analyzed. Results: The incidence of maxillary impacted teeth [69.3% (97/140)] was higher than that of mandibular impacted teeth [40% (56/140)]. The difference was statistically significant (χ²=24.22, P<0.001). The supernumerary teeth were mainly located in the premolar area 61.4% (21/44), and most of them were in the palatal region of the permanent teeth 95.5% (42/44). They were generally located at the same height or the occlusal side of the corresponding permanent teeth. The success rate of closed traction was 93.9% (138/147). The success rate in the adolescent group [98.2% (108/110)] was higher than that in the adult group [81.1% (30/37)], and the difference was significant (χ²=14.09, P<0.05). Failure after closed traction of 9 teeth was found totally, including 7 second premolars. The success rate of traction in impacted second premolars at different vertical (χ²=11.44, P<0.05) and horizontal (χ²=9.71, P<0.05) positions in alveolar bone was different significantlly. The success rates of the second premolars were high (15/16), middle (12/13), low (2/7), and lingual palatine (10/17), median (19/19), lip-buccal (0/0), respectively. Conclusions: The closed traction of impacted teeth in patients with CCD was effective, and the age was the main variable affecting the outcome. The success rate of traction in impacted second premolars located in low position vertically or in palatal position was low, which required close observation during treatment.
Adolescent ; Adult ; Bicuspid ; Child ; Cleidocranial Dysplasia/therapy* ; Female ; Humans ; Male ; Mandible ; Retrospective Studies ; Tooth, Supernumerary/surgery* ; Young Adult

Humans ; Bicuspid ; Dental Pulp Cavity ; Root Canal Therapy ; Tooth Root ; Mandible

Objective: To compare the impact of bicuspid aortic valve (BAV) or tricuspid aortic valve (TAV) on hemodynamics and left ventricular reverse remodeling after transcatheter aortic valve replacement (TAVR). Methods: We retrospectively analyzed the clinical data of patients who underwent TAVR in our hospital from January 2019 to March 2021. Patients were divided into BAV group and TAV group according to aortic contrast-enhanced CT. Each patient was followed up by N-terminal pro B-type natriuretic peptide (NT-proBNP) and echocardiography at four time points, namely before TAVR, 24 hours, 1 month and 6 months after TAVR. Echocardiographic data, including mean pressure gradient (MPG), aortic valve area (AVA), left ventricular ejection fraction (LVEF), left ventricle mass (LVM) and LV mass index (LVMi) were evaluated. Results: A total of 41 patients were included. The age was (75.0±8.6) years, and male patients accounted for 53.7%. There were 19 BAV patients and 22 TAV patients in this cohort. All patients undergoing TAVR using a self-expandable prosthesis Venus-A valve. MPG was (54.16±21.22) mmHg(1 mmHg=0.133 kPa) before TAVR, (21.11±9.04) mmHg at 24 hours after TAVR, (18.84±7.37) mmHg at 1 month after TAVR, (17.68±6.04) mmHg at 6 months after TAVR in BAV group. LVEF was (50.42±13.30)% before TAVR, (53.84±10.59)% at 24 hours after TAVR, (55.68±8.71)% at 1 month after TAVR and (57.42±7.78)% at 6 months after TAVR in BAV group. MPG and LVEF substantially improved at each time point after operation, and the difference was statistically significant (all P<0.05) in BAV group. MPG in TAV group improved at each time point after operation, and the difference was statistically significant (all P<0.05). LVMi was (164.13±49.53), (156.37±39.11), (146.65±38.84) and (134.13±39.83) g/m² at the 4 time points and the value was significantly reduced at 1 and 6 months post TAVR compared to preoperative level(both P<0.05). LVEF in the TAV group remained unchanged at 24 hours after operation, but it was improved at 1 month and 6 months after operation, and the difference was statistically significant (all P<0.05). LVMi in TAV group substantially improved at each time point after operation, and the difference was statistically significant (all P<0.05). NT-proBNP in both two groups improved after operation, at 1 month and 6 months after operation, and the difference was statistically significant (all P<0.05). MPG in TAV group improved better than in BAV group during the postoperative follow-up (24 hours after TAVR: (11.68±5.09) mmHg vs. (21.11±9.04) mmHg, P<0.001, 1 month after TAVR: (10.82±3.71) mmHg vs. (18.84±7.37) mmHg, P<0.001, 6 months after TAVR: (12.36±4.42) mmHg vs. (17.68±6.04) mmHg, P=0.003). There was no significant difference in NT-proBNP between BAV group and TAV group at each time point after operation (all P>0.05). There was no significant difference in paravalvular regurgitation and second prosthesis implantation between the two groups (all P>0.05). Conclusions: AS patients with BAV or TAV experience hemodynamic improvement and obvious left ventricular reverse remodeling after TAVR, and the therapeutic effects of TAVR are similar between BAV and TAV AS patients in the short-term post TAVR.
Humans ; Male ; Aged ; Aged, 80 and over ; Transcatheter Aortic Valve Replacement ; Aortic Valve/surgery* ; Bicuspid Aortic Valve Disease/surgery* ; Aortic Valve Stenosis/surgery* ; Retrospective Studies ; Stroke Volume ; Heart Valve Diseases ; Ventricular Function, Left ; Treatment Outcome ; Ventricular Remodeling ; Hemodynamics

OBJECTIVE: To evaluate the influence of base materials on stress distribution in endodontically treated maxillary premolars restored with endocrowns using three-dimensional finite element analysis. METHODS: A maxillary second premolar was scanned by Micro-CT and a three-dimensional finite element model of ceramic endocrown with 1 mm thickness of base was established. A model without base was also established as a negative control. Four kinds of conventional base materials with different elastic modulus were adopted: light cure glass ionomer(3M Vitrebond, 3 657 MPa), flowable composite resin(3M Filtek Z350XT Flowable Restorative, 7 300 MPa), high strength glass ionomer(GC Fuji Ⅸ, 13 130 MPa), and posterior composite resin(3M Filtek P60, 19 700 MPa). With a 200 N force loaded vertically and obliquely, the distribution and magnitude of stress in the tooth tissue and adhesive layer were investigated by three-dimensional finite element analysis. RESULTS: The maximum von Mises stress values(vertical/oblique) in dentin and adhesive layer were measured as follows: (1) no base material: 19.39/70.49 MPa in dentin and 6.97/17.97 MPa in adhesive layer; (2) light cure glass ionomer: 19.00/69.75 MPa in dentin and 6.87/16.30 MPa in adhesive layer; (3) flowable composite resin: 18.78/69.33 MPa in dentin and 6.79/16.17 MPa in adhesive layer; (4) high strength glass ionomer: 18.71/69.20 MPa in dentin and 6.74/16.07 MPa in adhesive layer; (5) posterior composite resin: 18.61/69.03 MPa in dentin and 6.70/16.01 MPa in adhesive layer. Under the same loading condition, models with different elastic moduli of base materials had similar stress distribution patterns. The von Mises stress of tooth tissue was mainly concentrated in the tooth cervix. Under oblique load, the regions where von Mises stress concentrated in were similar to those under a vertical load, but the values increased. The stress concentration in the tooth cervix was alleviated in models with base materials compared with the model without base material. The maximum von Mises stress in the tooth tissue and adhesive layer decreased when the elastic modulus of base materials increased and got close to that of dentin. CONCLUSION The posterior composite resin of which the elastic moduli is high and close to that of dentin is recommended as base material for premolar endocrowns to alleviate the concentration of stress in tooth cervix and adhesive layer.
Bicuspid ; Ceramics ; Composite Resins ; Dental Stress Analysis ; Dentin ; Finite Element Analysis ; Humans ; Materials Testing ; Stress, Mechanical ; Tooth Cervix ; X-Ray Microtomography