The loss of occlusal vertical dimension due to multiple tooth loss and wear can lead to a collapsed occlusion, resulting in both functional and aesthetic problems.This case report describes a patient exhibiting mandibular prognathism as a result of vertical dimension loss. A comprehensive oral rehabilitation involving an increase in vertical dimension was required. A minimal number of implants were placed, and implant-supported surveyed crowns were fabricated, allowing for the design of a stable and retentive implant-assisted removable partial denture. The treatment resulted in both functional and aesthetic improvements. The anterior rotational pattern of the mandible was alleviated, and the implant-assisted partial denture provided clinically high levels of patient satisfaction. This case report details the diagnostic and therapeutic processes involved in this treatment.

Crossbite refers to a condition where there are remaining teeth, but none of the teeth are in occlusal contact, resulting in the loss of vertical support. When posterior vertical stop is lost, it is important to appropriately restore this support and create a harmonious occlusal plane. In this case, the patient had lost posterior support but declined surgical intervention due to a history of osteoporosis and the associated risk of medication-related osteonecrosis of the jaw (MRONJ). To restore the vertical space required for prosthetic rehabilitation, the vertical dimension was increased. The missing posterior teeth were replaced using removable partial dentures. Cross-mounting was performed, and the metal copings of the surveyed crowns and the framework of the final removable partial denture were 3D printed. After the treatment was completed, the patient expressed satisfaction with both functions and aesthetics. Regular follow-ups were conducted to monitor oral hygiene and occlusal stability.

Objective: Using finite element method (FEM) analysis of a clear aligner (CA), this study aimed to investigate the effects of varying the edentulous space on canine distal bodily movement during space closure following maxillary first premolar extraction. Methods: FEM analysis was used to simulate distal canine bodily movement following maxillary first premolar extraction using CAs. Four CA designs for edentulous spaces were compared: no-pontic, full-pontic, halfpontic, and beam. Three-dimensional models of the tooth components and CA were created. The target was set at a 0.25-mm distal canine movement. Long-term tooth movement was simulated using an iterative calculation method. Results: All the groups initially showed crown displacement, distal tipping, and distal rotation.Over time, the movement patterns differed in relation to the design. The no-pontic design exhibited the greatest displacement and tipping. The beam design exhibited the largest initial displacement but showed the lowest displacement and tipping thereafter. Full- and half-pontic designs yielded intermediate results. Significant force reduction was observed immediately after CA application, and was followed by a gradual decrease. The mean tooth-movement achievement rate was approximately 76.7%. Conclusions The edentulous space design of the CA substantially affected tooth-movement behavior. An iterative simulation is necessary to evaluate longterm tooth-movement patterns. The beam design demonstrated optimal suitability for bodily movement with minimal tipping. For optimal results, additional setup or overcorrection may be necessary.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Purpose: To compare the perioperative and postoperative outcomes between traditional trans-vesical robot-assisted simple prostatectomy (TV-RASP) and the newly introduced urethral-sparing (US) RASP. Materials and Methods: We retrospectively reviewed 42 patients who underwent TV-RASP (n=22) or US-RASP (n=20) performed by two experienced surgeons at two tertiary centers. Perioperative outcomes including operation time, estimated blood loss, length of hospital stay, and catheterization time were assessed. Postoperative outcomes were evaluated using the International Prostate Symptom Score (IPSS), quality of life (QoL), uroflowmetry parameters, Male Sexual Health Questionnaire-Ejaculation Dysfunction-Short Form (MSHQ-EjD-SF) scores, and maintenance of anterograde ejaculation. Results: This study analyzed 22 and 20 patients who underwent TV-RASP and US-RASP, respectively. Except for the TV-RASP group being older (70.0 years) than the US-RASP group (64.5 years) (p=0.028), no differences among other baseline characteristics existed. Perioperative outcomes indicated that hospital stay and catheterization time were significantly shorter in the US-RASP group than in the TV-RASP group (p<0.001). At postoperative month 1, the median IPSS and QoL scores were significantly better in the US-RASP group than in the TV-RASP group (p=0.001 and p=0.002, respectively). However, at months 6 and 12, no significant differences were noted in IPSS, QoL, maximum flow rate, and postvoid residual urine between the two groups. Sexually active patients in the US-RASP group maintained postoperative MSHQ-EjD functional and bother scores, whereas the TV-RASP group experienced a decline. Notably, 75.0% of patients in the US-RASP group preserved antegrade ejaculation, compared to only 20.0% in the TV-RASP group (p<0.001). Conclusions US-RASP is not inferior to TV-RASP in terms of functional outcomes. In addition, US-RASP yielded more rapid symptom improvements and preserved antegrade ejaculation than TV-RASP. However, larger prospective studies are required to confirm these findings and to further investigate the long-term efficacy and safety of US-RASP.

Purpose: In this study, we investigated the effect of bisphenol-A (BPA) and its major analogs, bisphenol-F (BPF), and bisphenol-S (BPS), on spermatogonial stem cells (SSCs) populations using in vitro SSC culture and in vivo transplantation models. Materials and Methods: SSCs enriched from 6- to 8-day-old C57BL/6-eGFP+ male mice testes were treated with varying concentrations of bisphenols for 7 days to examine bisphenol-derived cytotoxicity and changes in SSC characteristics. We utilized flow cytometry, immunocytochemistry, real-time quantitative reverse transcription-PCR, and western blot analysis. The functional alteration of SSCs was further investigated by examining donor SSC-derived spermatogenesis evaluation through in vivo transplantation and subsequent testis analysis. Results: BPF exhibited a similar inhibitory effect on SSCs as BPA, demonstrating a significant decrease in SSC survival, inhibition of proliferation, and induction of apoptosis. On the other hand, while BPS was comparatively weaker than BPA and BPF, it still showed significant SSC cytotoxicity. Importantly, SSCs exposed to BPA, BPF, and BPS exhibited a significant reduction in donor SSC-derived germ cell colonies per total number of cultured cells, indicating that, like BPA, BPF, and BPS can induce a comparable reduction in functional SSCs in the recipient animals. However, the progress of spermatogenesis, as evidenced by histochemistry and the expressions of PCNA and SSC specific markers, collectively indicates that BPA, BPF, and BPS may not adversely affect the spermatogenesis. Conclusions Our findings indicate that the major BPA substitutes, BPF and BPS, have significant cytotoxic effects on SSCs, similar to BPA. These effects may lead to a reduction in the functional self-renewal stem cell population and potential impacts on male fertility.

Purpose: 11C-Methionine PET/CT is a promising method for detecting parathyroid lesions in patients with primary hyperparathyroidism (PHPT). We aimed to determine the diagnostic ability and correlation of digital 11C-Methionine PET/CT for parathyroid lesions in patients with PHPT, particularly in cases where standard imaging methods yielded inconclusive results. Methods: This retrospective analysis was conducted on patients diagnosed with PHPT who underwent digital 11C-Methionine PET/CT imaging because of ambiguous results on standard imaging work-up ( 99m Tc-MIBI parathyroid scan and/or neck ultrasonography). Quantitative 11C-Methionine PET/CT parameters, including maximum standardized uptake value (SUVmax), mean SUV (SUVmean), peak SUV (SUVpeak), parathyroid methionine volume (PMV), and whole methionine uptake(WMU: PMV multiplied by SUVmean) were calculated with various thresholds, and their correlations with biochemical andpathologic parameters were investigated. Results: This study included 22 consecutive patients (10 men and 12 women) with a median age of 64.0 years. The lesion detection rate and sensitivity of digital 11C-Methionine PET/CT were 81.8% (18/22) and 100.0% (18/18), respectively.Quantitative analysis revealed that serum PTH (r = 0.490, P = 0.039) and serum calcium (r = 0.583, P = 0.011) were signifi-cantly correlated with PMV50%. Conclusion Digital 11C-Methionine PET/CT offers good performance in the detection of parathyroid lesions in PHPT patients with inconclusive standard imaging work-up. The volume parameter of PMV50% significantly correlated biochemi-cal parameters and can serve as a complementary diagnostic tool.

BACKGROUND/OBJECTIVES: Particulate matter 2.5 (PM2.5) exposure can promote epithelialmesenchymal transition (EMT) in human retinal pigment epithelial (RPE) cells. The flowers of Tagetes erecta Linn, commonly known as marigold, are rich in diverse flavonoids and carotenoids and play a significant role in preventing cellular damage induced by oxidative stress, but the role of their extracts in RPE cells has not been reported. This study aimed to evaluate the influence of an ethanol extract of T. erecta Linn flower (TE) on PM2.5-induced EMT processes in RPE ARPE-19 cells.MATERIALS/METHODS: To investigate the protective effect of TE against ARPE-19 cell damage following PM2.5 treatment, cells were exposed to TE for 1 h before exposure to PM2.5 for 24 h. We investigated whether the efficacy of TE on suppressing PM2.5-induced EMT was related to antioxidant activity and the effect on the expression changes of factors involved in EMT regulation. Additionally, we further explored the role of intracellular signaling pathways associated with EMT inhibition. RESULTS: TE significantly blocked PM2.5-induced cytotoxicity while effectively preventing mitochondrial dysfunction, increased reactive oxygen species (ROS) generation, and mitochondrial membrane potential disruption. TE inhibited PM2.5-induced EMT and inflammatory response by suppressing the ROS-mediated transforming growth factor-β/ suppressor of mothers against decapentaplegic/mitogen-activated protein kinases signaling pathway. CONCLUSION Our results suggest that marigold extract is a highly effective in protection against PM2.5-induced eye damage.

The loss of occlusal vertical dimension due to multiple tooth loss and wear can lead to a collapsed occlusion, resulting in both functional and aesthetic problems.This case report describes a patient exhibiting mandibular prognathism as a result of vertical dimension loss. A comprehensive oral rehabilitation involving an increase in vertical dimension was required. A minimal number of implants were placed, and implant-supported surveyed crowns were fabricated, allowing for the design of a stable and retentive implant-assisted removable partial denture. The treatment resulted in both functional and aesthetic improvements. The anterior rotational pattern of the mandible was alleviated, and the implant-assisted partial denture provided clinically high levels of patient satisfaction. This case report details the diagnostic and therapeutic processes involved in this treatment.

Crossbite refers to a condition where there are remaining teeth, but none of the teeth are in occlusal contact, resulting in the loss of vertical support. When posterior vertical stop is lost, it is important to appropriately restore this support and create a harmonious occlusal plane. In this case, the patient had lost posterior support but declined surgical intervention due to a history of osteoporosis and the associated risk of medication-related osteonecrosis of the jaw (MRONJ). To restore the vertical space required for prosthetic rehabilitation, the vertical dimension was increased. The missing posterior teeth were replaced using removable partial dentures. Cross-mounting was performed, and the metal copings of the surveyed crowns and the framework of the final removable partial denture were 3D printed. After the treatment was completed, the patient expressed satisfaction with both functions and aesthetics. Regular follow-ups were conducted to monitor oral hygiene and occlusal stability.