Ankylosing spondylitis (AS) combined with lower cervical fracture is often categorized into unstable fracture, with a high incidence of neurological injury and a high rate of disability and morbidity. As factors such as shoulder occlusion may affect the accuracy of X-ray imaging diagnosis, it is often easily misdiagnosed at the primary diagnosis. Non-operative treatment has complications such as bone nonunion and the possibility of secondary neurological damage, while the timing, access and choice of surgical treatment are still controversial. Currently, there are no clinical practice guidelines for the treatment of AS combined with lower cervical fracture with or without dislocation. To this end, the Spinal Trauma Group of Orthopedics Branch of Chinese Medical Doctor Association organized experts to formulate Clinical guidelines for the treatment of ankylosing spondylitis combined with lower cervical fracture in adults ( version 2024) in accordance with the principles of evidence-based medicine, scientificity and practicality, in which 11 recommendations were put forward in terms of the diagnosis, imaging evaluation, typing and treatment, etc, to provide guidance for the diagnosis and treatment of AS combined with lower cervical fracture.

Objective To establish a method to characterize the size and density of the female breast based on three-dimensional images of breast cone-beam computed tomography (CBCT), and describe the breast characteristics of women in a region of China, and to explore its value in dosimetric assessment for breast CBCT examinees. Methods We retrospectively surveyed the breast CBCT images of 203 women in a grade A tertiary hospital in a southwestern city of China from January 2021 to March 2023. The effective diameter of the breast at the chest-wall (D_eff), chest wall-to-nipple length (CNL), the effective diameter of the breast at half of CNL (D_h/2), breast volume (BV), glandular volume (GV), and volumetric breast density (VBD) were measured using the specific tools of the Koning Imaging Viewer system. The differences between groups were assessed using the Kruskal-Wallis H test. The correlation between variables was assessed using the Spearman’s correlation coefficient. Results The median values of D_eff, D_h/2, CNL, BV, GV, and VBD of the surveyed population were 11.9 cm, 8.3 cm, 6.5 cm, 327.7 cm³, 47.0 cm³, and 15.4%, respectively. GV and VBD had significant negative correlations with age. D_eff, D_h/2, CNL, and BV were significantly negatively correlated with VBD. Conclusion We established a quantitative method to analyze female breast characteristics based on three-dimensional breast CBCT images, and preliminarily characterized the female breast in a region of China, which can provide methodological support for the investigation of female breast characteristics in various regions of China in the future.

Ankylosing spondylitis (AS) combined with spinal fractures with thoracic and lumbar fracture as the most common type shows characteristics of unstable fracture, high incidence of nerve injury, high mortality and high disability rate. The diagnosis may be missed because it is mostly caused by low-energy injury, when spinal rigidity and osteoporosis have a great impact on the accuracy of imaging examination. At the same time, the treatment choices are controversial, with no relevant specifications. Non-operative treatments can easily lead to bone nonunion, pseudoarthrosis and delayed nerve injury, while surgeries may be failed due to internal fixation failure. At present, there are no evidence-based guidelines for the diagnosis and treatment of AS combined with thoracic and lumbar fracture. In this context, the Spinal Trauma Academic Group of Orthopedics Branch of Chinese Medical Doctor Association organized experts to formulate the Clinical guideline for the diagnosis and treatment of adult ankylosing spondylitis combined with thoracolumbar fracture ( version 2023) by following the principles of evidence-based medicine and systematically review related literatures. Ten recommendations on the diagnosis, imaging evaluation, classification and treatment of AS combined with thoracic and lumbar fracture were put forward, aiming to standardize the clinical diagnosis and treatment of such disorder.

The acute combination fractures of the atlas and axis in adults have a higher rate of neurological injury and early death compared with atlas or axial fractures alone. Currently, the diagnosis and treatment choices of acute combination fractures of the atlas and axis in adults are controversial because of the lack of standards for implementation. Non-operative treatments have a high incidence of bone nonunion and complications, while surgeries may easily lead to the injury of the vertebral artery, spinal cord and nerve root. At present, there are no evidence-based Chinese guidelines for the diagnosis and treatment of acute combination fractures of the atlas and axis in adults. To provide orthopedic surgeons with the most up-to-date and effective information in treating acute combination fractures of the atlas and axis in adults, the Spinal Trauma Group of Orthopedic Branch of Chinese Medical Doctor Association organized experts in the field of spinal trauma to develop the Evidence-based guideline for clinical diagnosis and treatment of acute combination fractures of the atlas and axis in adults ( version 2023) by referring to the "Management of acute combination fractures of the atlas and axis in adults" published by American Association of Neurological Surgeons (AANS)/Congress of Neurological Surgeons (CNS) in 2013 and the relevant Chinese and English literatures. Ten recommendations were made concerning the radiological diagnosis, stability judgment, treatment rules, treatment options and complications based on medical evidence, aiming to provide a reference for the diagnosis and treatment of acute combination fractures of the atlas and axis in adults.

Mammography has played an essential role in the screening and treatment of breast cancer. However, the application of X-rays will also increase the risks of breast cancer while improving its detection rate. Moreover, the risks will increase with an increase in the radiation dose. Since the glandular tissue in breasts is sensitive to radiation, the evaluation of the average glandular dose (AGD) in mammography has attracted considerable international attention. Compared to relatively mature dosimetric studies on traditional two-dimension mammography and digital breast tomosynthesis, the method for the dose evaluation of the new cone beam CT for breasts are still subjected to research. This paper reviews and explores the current status of studies on the assessment method and relevant influencing factors of AGD under different types of mammography equipment.

Objective To evaluate the radiation protection of “four-in-one” dental X-ray equipment and to investigate the safety interlock of the equipment by measuring the scattered radiation at the position of the patient during operation. Methods A cone-beam CT dental phantom was used to simulate the patient’s head. The intra-oral and extra-oral components of the “four-in-one” X-ray equipment were installed in a 5 m² room. The scattered radiation at patient position was measured using a γ/X-ray survey meter, and the effects of intra-oral and extra-oral components were compared. Results For a 5 m² room, when CBCT was exposed under typical conditions, the dose at the patient's position was 10.70 uSv/h when there was an intra-oral component and 10.60 uSv/h when there was no intraoral component. The intra-oral part did not affect the radiation dose at the patient's position. When the intra-oral component was exposed, the dose rate at the patient's position was 4.05-6.85 uSv/h, and the extra-oral part did not affect the scattered dose of the patient examined with intra-oral components. Conclusion The evaluation of radiation protection of new equipment must comprehensively consider radiation safety and equipment operation safety. The results of this study provide suggestions for clinical radiation protection supervision and evaluation of “four-in-one” dental X-ray equipment.

Osteoporotic vertebral compression fracture (OVCF) can lead to lower back pain and may be even accompanied by scoliosis, neurological dysfunction and other complications, which will affect the daily activities and life quality of patients. Vertebral augmentation is an effective treatment method for OVCF, but it cannot correct unbalance of bone metabolism or improve the osteoporotic status, causing complications like lower back pain, limited spinal activities and vertebral refracture. The post-operative systematic and standardized rehabilitation treatments can improve curative effect and therapeutic efficacy of anti-osteoporosis, reduce risk of vertebral refracture, increase patient compliance and improve quality of life. Since there still lack relevant clinical treatment guidelines for postoperative rehabilitation treatments following vertebral augmentation for OVCF, the current treatments are varied with uneven therapeutic effect. In order to standardize the postoperative rehabilitation treatment, the Spine Trauma Group of the Orthopedic Branch of Chinese Medical Doctor Association organized relevant experts to refer to relevant literature and develop the "Guideline for postoperative rehabilitation treatment following vertebral augmentation for osteoporotic vertebral compression fracture (2022 version)" based on the clinical guidelines published by the American Academy of Orthopedic Surgeons (AAOS) as well as on the principles of scientificity, practicality and advancement. The guideline provided evidence-based recommendations on 10 important issues related to postoperative rehabilitation treatments of OVCF.

Objective:To compare the clinical efficacy between puncture assisted by a "TINAVI" orthopaedic robot versus freehand puncture in vertebroplaty for osteoporotic vertebral compression fracture(OVCF) of the upper thoracic vertebra.Methods:A retrospective study was conducted of the 19 patients (20 vertebral bodies) with OVCF of the upper thoracic vertebra who had been treated at Department of Spine Surgery, Honghui Hospital from January 2018 to March 2019 by robotic vertebroplasty (robot group) and of another 21 counterpart patients (21 vertebral bodies) who had been treated by conventional vertebroplasty from January 2016 to December 2017 (freehand group). Puncture was conducted by a "TINAVI" orthopaedic robot in the robotic vertebroplasty but freehand in the conventional vertebroplasty. The robot group had 5 males and 14 females, aged from 62 to 88 years; the freehand group had 6 males and 15 females, aged from 64 to 83 years. The 2 groups were compared in terms of operation time, bone cement volume, postoperative complications (cement leakage, infection and embolism), visual analogue scale (VAS), Oswestry disability index (ODI), anterior height (AH) and kyphosis angulation (KA) of the injured vertebra at day 1 and last follow-up after surgery.Results:The 2 groups were comparable because there were no significant differences between them in the preoperative general data ( P>0.05). Vertebroplasty via unilateral puncture approach was completed uneventfully in the 19 patients (20 vertebral bodies) in the robot group and in the 21 patients (21 vertebral bodies) in the freehand group. The 40 patients were followed up for 6 to 12 months (mean, 8.3 month). The operation time [(37.9±8.2) min], bone cement volume [(2.3±0.9) mL] and rate of cement leakage (10.0%, 2/20) in the robot group were all significantly less or lower than those in the freehand group [(46.2±9.4) min, (4.2±1.3) mL and 42.9% (9/21)] ( P<0.05). No infection or embolism was observed in either group. There were no significant differences between the 2 groups in VAS, ODI, AH or KA of the injured vertebra at day 1 or last follow-up after surgery ( P>0.05). Conclusion:In vertebroplaty for OVCF of the upper thoracic vertebra, compared with conventional freehand puncture, puncture assisted by a "TINAVI" orthopaedic robot can lead to satisfactory clinical efficacy because it reduces operation time, volume of bone cement injection, and thus incidence of bone cement leakage.

Objective:To determine and optimize the radiation quality of the calibration system for mammography dosimeters in IAEA/WHO Secondary Standard Dosimetry Laboratory and to study the requirements for accuracy of thickness of the aluminum sheets used in the measurement, with a view to ensure the accuracy of the radiation quality.Methods:For the measurements of tube voltage and RQR-M radiation quality, a standard kV meter was used to determine the actual tube voltage value of the system under continuous exposure for 30 s by setting tube voltage of 25, 28, 30 and 35 kV, respectively, and aluminum sheet method was used to determine the first half value layer (HVL 1). The kV values were adjusted to make the reading of the standard kV meter as close as possible to its nominal value, so as to obtain the set kV value, actual tube voltage and HVL 1 per 1 kV within the nominal 25-35 kV range. For effects of different thickness of aluminum sheets on the result of HVL 1 measurement, a comparison was made between HVL 1 measured by aluminum sheet with thickness of 0.318 mm and 0.369 mm and HVL 1 measured under 18 different groups of aluminum sheet using a selected 30 kV tube voltage. Results:After the set kV values were adjusted, the actual tube voltage deviations from the nominal values under 25, 28, 30 and 35 kV were reduced from 0.55, 0.34, 0.33, 0.30 to 0.04, 0.02, -0.04, -0.01, and the HVL 1 deviations were reduced from 0.011, 0.007, 0.010, 0.012 to 0.000, 0.003, 0.003, 0.010, respectively. When the thickness differences between the two types of aluminum sheet and the reference HVL 1 were both within 0.1 mm, the deviations of the measured HVL 1 were all less than 0.01 mm Al, and the result was relatively accurate. However, when the differences exceeded that of 0.1 mm, most of the deviations of the measured HVL 1 were between 0.01 and 0.02 mm Al, and the measured result was not accurate. Conclusions:Although the RQR-M radiation quality of the calibration system was deviated, it is still within the range specified under the IEC 61267-2005. The radiation quality was closer to the standard values after fine-tuning the system tube voltage. In order to measure the HVL 1 more accurately, the thickness differences between the used aluminum sheet and nominal HVL 1 should not be greater than 0.1 mm Al.

Since December 2019, the corona virus disease 2019 (COVID-19) caused by the 2019 novel coronavirus (2019-nCoV) has been reported in Wuhan, Hubei Province. Almost 70% of patients susceptible to 2019-nCoV are over age of 50 years, with extremely large proportion of critical illness and death of the elderly patients. Meanwhile, the elderly patients are at high risk of osteoporotic fractures especially osteoporotic vertebral compression fractures (OVCF). During the prevention and control of COVID-19 epidemic, orthopedists are confronted with the following difficulties including how to screen and protect OVCF patients, how to accurately diagnose and assess the condition of OVCF patients with suspected or confirmed COVID-19, and how to develop reasonable treatment plans and comprehensive protective measures in emergency and outpatient clinics. In order to standardize the diagnosis and treatment of patients with OVCF diagnosed with COVID-19, the authors jointly develop this expert consensus. The consensus systematically recommends the standardized emergency and outpatient screening and confirmation procedures for OVCF patients with suspected or confirmed COVID-19 and protective measures for emergency and outpatient clinics. Moreover, the consensus describes the grading and classification of OVCF patients diagnosed with COVID-19 according to the severity of illness and recommends different treatment plans and corresponding protective measures based on the different types and epidemic prevention and control requirements.