Aim To explore the effects of Lycium berry seed oil on Nrf2/ARE pathway and oxidative damage in testis of subacute aging rats. Methods Fifty out of 60 male SD rats, aged 8 weeks, were subcutaneously injected with 125 mg • kg"D-galactosidase in the neck for 8 weeks to establish a subacute senescent rat model. The presence of senescent cells was observed using P-galactosidase ((3-gal), while testicular morphology was examined using HE staining. Serum levels of testosterone (testosterone, T), follicle-stimulating hormone ( follicle stimulating hormone, FSH ) , luteinizing hormone ( luteinizing hormone, LH ) , superoxide dis-mutase ( superoxide dismutase, SOD ) , glutathione ( glutathione, GSH) and malondialdehyde ( malondial-dehyde, MDA) were measured through ELISA, and the expressions of factors related to aging, oxidative damage, and the Nrf2/ARE pathway were assessed via immunohistochemical analysis and Western blotting. Results After successfully identifying the model, the morphology of the testis was improved and the intervention of Lycium seed oil led to a down-regulation in the expression of [3-gal and -yH2AX. The serum levels of SOD, GSH, T, and FSH increased while MDA and LH decreased (P 0. 05) . Additionally, there was an up-regulated expression of Nrf2, GCLC, NQOl, and SOD2 proteins in testicular tissue ( P 0. 05 ) and nuclear expression of Nrf2 in sertoli cells. Conclusion Lycium barbarum seed oil may reduce oxidative damage in testes of subacute senescent rats by activating the Nrf2/ARE signaling pathway.

Temporomandibular joint (TMJ) diseases are common clinical conditions. The number of patients with TMJ diseases is large, and the etiology, epidemiology, disease spectrum, and treatment of the disease remain controversial and unknown. To understand and master the current situation of the occurrence, development and prevention of TMJ diseases, as well as to identify the patterns in etiology, incidence, drug sensitivity, and prognosis is crucial for alleviating patients′suffering.This will facilitate in-depth medical research, effective disease prevention measures, and the formulation of corresponding health policies. Cohort construction and research has an irreplaceable role in precise disease prevention and significant improvement in diagnosis and treatment levels. Large-scale cohort studies are needed to explore the relationship between potential risk factors and outcomes of TMJ diseases, and to observe disease prognoses through long-term follw-ups. The consensus aims to establish a standard conceptual frame work for a cohort study on patients with TMJ disease while providing ideas for cohort data standards to this condition. TMJ disease cohort data consists of both common data standards applicable to all specific disease cohorts as well as disease-specific data standards. Common data were available for each specific disease cohort. By integrating different cohort research resources, standard problems or study variables can be unified. Long-term follow-up can be performed using consistent definitions and criteria across different projects for better core data collection. It is hoped that this consensus will be facilitate the development cohort studies of TMJ diseases.

Objective To measure the distance between the lateral compression Ⅱ(LC-Ⅱ)screw guide needle and the surrounding important structures around the anterior inferior iliac spine in pelvic fractures and to locate the needle point,so as to provide anatomical reference for clinical nail placement.Methods Totally 40 adult gross specimens of embalming were implanted with LC-Ⅱ screw guide needle under the surveillance of C-arm machine,and the specimens were dissected.The shortest distance between the insertion point and the lateral femoral cutaneous nerve,femoral nerve,femoral artery,femoral vein,anterior superior iliac spine and inguinal ligament was measured.The triangle was constructed between the insertion point,anterior superior iliac spine and inguinal ligament,and the exact location of the entry point was calculated.Results The average distance between the insertion point of the male needle and the femoral vein was(50.67±7.29)mm＞the anterior superior iliac spine(43.83±7.58)mm＞the femoral artery(38.35±6.63)mm＞the femoral nerve(31.17±1.67)mm=the inguinal ligament(28.69±6.59)mm＞the lateral femoral cutaneous nerve(7.98±3.81)mm.The mean distance between the insertion point of the female needle and the anterior superior iliac spine was(45.28±7.07)mm=femoral vein(43.72±6.89)mm＞femoral artery(33.76±6.33)mm＞femoral nerve(25.66±6.46)mm=inguinal ligament(23.22±5.00)mm＞lateral femoral cutaneous nerve(8.97±4.76)mm.The projection distance of the entry point was 31.77 mm for men and 38.41 mm for women.The Angle b was 42.81°for men and 31.71° for women.Conclusion The lateral femoral cutaneous nerve is most vulnerable to injury when LC-Ⅱ screw is inserted,and the risk of injury has nothing to do with sex.The insertion point positioning method a and b made LC-Ⅱ screw placement quickly,safely and accurately,and reduced fluoroscopy time and frequency.

Objective:To explore the effect of sinomenine(SIN)on LPS-induced apoptosis and autophagy of lung epithelial cells through the JNK/c-Jun signaling pathway.Methods:MLE-12 lung epithelial cells were cultured,and the toxicity of SIN was detected by CCK-8.Apoptosis was detected by flow cytometry,the number of autophagosomes was detected by immunofluorescence,and the expression levels of apoptosis,autophagy and JNK/c-Jun signaling pathway-related proteins were detected by Western blot.Results:After LPS modeling,apoptosis rate and the number of autophagosomes were increased,the protein levels of Cleaved caspase-3,Bax,and Beclin-1,and LC3Ⅱ/LC3Ⅰ,p-JNK/JNK and p-c-Jun/c-Jun were increased(P<0.05);Bcl-2 and P62 protein levels were decreased(P<0.05).SIN treatment can significantly improve the effects of LPS on apoptosis and autophagy,as well as the regulation of the JNK/c-Jun signaling pathway(P<0.05).Treatment with the autophagy inhibitor 3-MA or the JNK agonist ANISO could partially reverse the protective effect of SIN on LPS-induced lung epithelial cells(P<0.05).Conclusion:SIN may increase autophagy and pro-tect lung epithelial cells damaged by LPS by regulating proteins related to the JNK/c-Jun signaling pathway.

The objective of this study was to determine the frequency and resistance patterns of ESBL-producing E.coli in lambs with diarrhea in the Kashi area,Xinjiang.The findings may provide guidance for the prevention and control of clinical E.coli disease.We collected 385 samples of perianal feces from lambs with diarrhea in the Kashgar area.From these samples,we isolated 371 strains of E.coli.We then used the double-paper-sheet synergistic method to screen for ESBL-producing E.coli.Additionally,we conducted analyses to identify drug-resistance genes,analyze drug resistance,and study the phylo-typing of the screened strains.Of 371 E.coli strains,204 were identified as ESBL-producing strains.The prevalence rates of blaCTX-M,blaCTX-M-1G,blaCTX-M-9G,and bla TEM resistance genes was 67.65％,69.12％,30.39％,and 63.73％,respectively.All ESBL-pro-ducing strains were resistant to multiple drugs,with resistance rates ranging from 90.69％to 100％for eight specific drugs:ampicillin,cefotaxime,gentamicin,enrofloxacin,azithromy-cin,tetracycline,chloramphenicol,methotrexate,and amitrazine.The phylogenetic subgroups of the strains were distributed primarily in groups A and D.Among group A strains,41.11％exhibited resistance to ten drugs,whereas among group D strains,40％exhibited resistance to 11 drugs.ESBL-pro-ducing strains of Escherichia coli are the main pathogens cau-sing diarrhea in lambs in the Kashgar region;group A is the main group,and all groups are multi-drug resistant.

Objective To investigate the clinical characteristics and prognosis of pneumococcal meningitis(PM),and drug sensitivity of Streptococcus pneumoniae(SP)isolates in Chinese children.Methods A retrospective analysis was conducted on clinical information,laboratory data,and microbiological data of 160 hospitalized children under 15 years old with PM from January 2019 to December 2020 in 33 tertiary hospitals across the country.Results Among the 160 children with PM,there were 103 males and 57 females.The age ranged from 15 days to 15 years,with 109 cases(68.1% )aged 3 months to under 3 years.SP strains were isolated from 95 cases(59.4% )in cerebrospinal fluid cultures and from 57 cases(35.6% )in blood cultures.The positive rates of SP detection by cerebrospinal fluid metagenomic next-generation sequencing and cerebrospinal fluid SP antigen testing were 40% (35/87)and 27% (21/78),respectively.Fifty-five cases(34.4% )had one or more risk factors for purulent meningitis,113 cases(70.6% )had one or more extra-cranial infectious foci,and 18 cases(11.3% )had underlying diseases.The most common clinical symptoms were fever(147 cases,91.9% ),followed by lethargy(98 cases,61.3% )and vomiting(61 cases,38.1% ).Sixty-nine cases(43.1% )experienced intracranial complications during hospitalization,with subdural effusion and/or empyema being the most common complication[43 cases(26.9% )],followed by hydrocephalus in 24 cases(15.0% ),brain abscess in 23 cases(14.4% ),and cerebral hemorrhage in 8 cases(5.0% ).Subdural effusion and/or empyema and hydrocephalus mainly occurred in children under 1 year old,with rates of 91% (39/43)and 83% (20/24),respectively.SP strains exhibited complete sensitivity to vancomycin(100% ,75/75),linezolid(100% ,56/56),and meropenem(100% ,6/6).High sensitivity rates were also observed for levofloxacin(81% ,22/27),moxifloxacin(82% ,14/17),rifampicin(96% ,25/26),and chloramphenicol(91% ,21/23).However,low sensitivity rates were found for penicillin(16% ,11/68)and clindamycin(6% ,1/17),and SP strains were completely resistant to erythromycin(100% ,31/31).The rates of discharge with cure and improvement were 22.5% (36/160)and 66.2% (106/160),respectively,while 18 cases(11.3% )had adverse outcomes.Conclusions Pediatric PM is more common in children aged 3 months to under 3 years.Intracranial complications are more frequently observed in children under 1 year old.Fever is the most common clinical manifestation of PM,and subdural effusion/emphysema and hydrocephalus are the most frequent complications.Non-culture detection methods for cerebrospinal fluid can improve pathogen detection rates.Adverse outcomes can be noted in more than 10% of PM cases.SP strains are high sensitivity to vancomycin,linezolid,meropenem,levofloxacin,moxifloxacin,rifampicin,and chloramphenicol.[Chinese Journal of Contemporary Pediatrics,2024,26(2):131-138]

The regulatory requirements of 3D printing products were introduced.The risks during the production of 3D printed navigational template for orthopedic surgery were summarized in terms of data acquisition,medical-industrial intera-ction design,3D printing,post-processing and sterilization.Some quality control measures were proposed from the aspects of quality control of raw materials,validation of data and software,verification of printing process parameters,post-processing method and verification,sterilization verification and testing of semi-finished and final products,so as to enhance the safety and effectiveness of 3D printed navigational template for orthopedic surgery.[Chinese Medical Equipment Journal,2024,45(5):80-85]

Traumatic fractures and stress fractures are common orthopedic diseases,and there is great potential in researching bone turnover,repair,and promotion of fracture healing.Basic medical experiments often use animal models of long bone fractures in limbs to study the mechanisms of various interventions on fracture healing.Fracture healing is a complex process influenced by multiple factors and involves multiple molecules and pathways.Therefore,to explore the mechanisms more deeply,accelerate the translation of results,and improve the clinical efficacy,it is particularly important to choose the appropriate animal fracture modeling methods in experimental research.Based on this,this paper conducts a literature review of animal species and modeling methods commonly used for long bone fracture models in experimental research.It summarizes five methods:bone defect method,physical impact method,mechanical bending method,open osteotomy method,and drilling method.A side-by-side comparison of their advantages,disadvantages,and scope of application is made,aiming to provide suitable fracture models for studyingthe mechanisms of fracture healing interventions.

Objective: To analyze the prevalence and the risk factors of fungal sepsis in 25 neonatal intensive care units (NICU) among preterm infants in China, and to provide a basis for preventive strategies of fungal sepsis. Methods: This was a second-analysis of the data from the "reduction of infection in neonatal intensive care units using the evidence-based practice for improving quality" study. The current status of fungal sepsis of the 24 731 preterm infants with the gestational age of <34⁺⁰ weeks, who were admitted to 25 participating NICU within 7 days of birth between May 2015 and April 2018 were retrospectively analyzed. These preterm infants were divided into the fungal sepsis group and the without fungal sepsis group according to whether they developed fungal sepsis to analyze the incidences and the microbiology of fungal sepsis. Chi-square test was used to compare the incidences of fungal sepsis in preterm infants with different gestational ages and birth weights and in different NICU. Multivariate Logistic regression analysis was used to study the outcomes of preterm infants with fungal sepsis, which were further compared with those of preterm infants without fungal sepsis. The 144 preterm infants in the fungal sepsis group were matched with 288 preterm infants in the non-fungal sepsis group by propensity score-matched method. Univariate and multivariate Logistic regression analysis were used to analyze the risk factors of fungal sepsis. Results: In all, 166 (0.7%) of the 24 731 preterm infants developed fungal sepsis, with the gestational age of (29.7±2.0) weeks and the birth weight of (1 300±293) g. The incidence of fungal sepsis increased with decreasing gestational age and birth weight (both P<0.001). The preterm infants with gestational age of <32 weeks accounted for 87.3% (145/166). The incidence of fungal sepsis was 1.0% (117/11 438) in very preterm infants and 2.0% (28/1 401) in extremely preterm infants, and was 1.3% (103/8 060) in very low birth weight infants and 1.7% (21/1 211) in extremely low birth weight infants, respectively. There was no fungal sepsis in 3 NICU, and the incidences in the other 22 NICU ranged from 0.7% (10/1 397) to 2.9% (21/724), with significant statistical difference (P<0.001). The pathogens were mainly Candida (150/166, 90.4%), including 59 cases of Candida albicans and 91 cases of non-Candida albicans, of which Candida parapsilosis was the most common (41 cases). Fungal sepsis was independently associated with increased risk of moderate to severe bronchopulmonary dysplasia (BPD) (adjusted OR 1.52, 95%CI 1.04-2.22, P=0.030) and severe retinopathy of prematurity (ROP) (adjusted OR 2.55, 95%CI 1.12-5.80, P=0.025). Previous broad spectrum antibiotics exposure (adjusted OR=2.50, 95%CI 1.50-4.17, P<0.001), prolonged use of central line (adjusted OR=1.05, 95%CI 1.03-1.08, P<0.001) and previous total parenteral nutrition (TPN) duration (adjusted OR=1.04, 95%CI 1.02-1.06, P<0.001) were all independently associated with increasing risk of fungal sepsis. Conclusions: Candida albicans and Candida parapsilosis are the main pathogens of fungal sepsis among preterm infants in Chinese NICU. Preterm infants with fungal sepsis are at increased risk of moderate to severe BPD and severe ROP. Previous broad spectrum antibiotics exposure, prolonged use of central line and prolonged duration of TPN will increase the risk of fungal sepsis. Ongoing initiatives are needed to reduce fungal sepsis based on these risk factors.
Infant ; Infant, Newborn ; Humans ; Birth Weight ; Intensive Care Units, Neonatal ; Retrospective Studies ; Tertiary Care Centers ; Infant, Extremely Low Birth Weight ; Gestational Age ; Infant, Extremely Premature ; Sepsis/epidemiology* ; Retinopathy of Prematurity/epidemiology* ; Bronchopulmonary Dysplasia/epidemiology*

OBJECTIVE: To explore the influence of the thickness of mixed cardboard on the compressive strength of glass ionomer cement and the associated factors. METHODS: Three different types of glass ionomer cements were mixed on the top of 60, 40, 20 and 1 pieces of paper (P60, P40, P20 and P1), respectively. The compressive strength of the materials was tested after solidification, and the bubble rate was calculated with the assistance of scanning electron microscope. RESULTS: (1) Compressive strength: ① ChemFil Superior glass ionomer (CF): The average compressive strength of P1 group was the highest, which was significantly different from that of P40 and P60 groups (P values were 0.041 and 0.032 respectively); ② To Fuji IX GP glass ionomer (IX): The average compressive strength of P1 group was the highest, which was statistically different from that of P40 and P60 groups (P values were 0.042 and 0.038 respectively); ③ Glaslonomer FX-Ⅱ glass ionomer cement (FX): The average compressive strength of P1 group was the highest, which was statistically different from that of P20, P40 and P60 groups (P values were 0.031, 0.040 and 0.041 respectively), but there was no statistical difference among the other groups. All the three materials showed that the compressive strength of glass ions gradually increased with the decrease of the thickness of the blended paperboard, and the two materials had a highly linear negative correlation, the correlation coefficients of which were CF-0.927, IX-0.989, FX-0.892, respectively. (2) Scanning electron microscope: P1 group had the least bubbles among the three materials. CONCLUSION It indicates that the thickness of mixed cardboard has a negative correlation with the compressive strength of glass ions. The thicker the mixed cardboard is, the greater the elasticity is. Excessive elasticity will accelerate the mixing speed when the grinding glass ions. Studies have shown that the faster the speed of artificial mixing is, the more bubbles is produced.The thicker ther mixed cardboard is, the more bubblesn are generated by glass ionomer cement, and the higher the compressive strength is. Using one piece of paper board to mix glass ionomer cement has the least bubbles and can obtain higher compressive strength.
Compressive Strength ; Materials Testing ; Glass Ionomer Cements ; Silicon Dioxide