Pre-admission is a critical initiative to optimize medical service processes and alleviate the challenge of "difficult access to healthcare. "However, there is currently a lack of standardized protocols for pre-admission procedures. This study aims to systematically analyze key nodes and risk factors in pre-admission process design and propose optimization strategies, providing a foundation for policy formulation and hospital practices. By constructing a "forward-reverse" dual-process model of pre-admission and identifying risk points based on stakeholder theory (patients, hospitals, healthcare administration, and insurance), the study reveals that while pre-admission can reduce the average length of stay, improve bed turnover rates, and enhance patient satisfaction, it also presents risks such as cross-period financial settlement, challenges in insurance policy adaptability, demands for information system integration, and the need for defining medical safety boundaries. To optimize the pre-admission process and mitigate these risks, this study explores framework improvements in areas including eligibility criteria, mode selection, cost settlement, transition between pre-admission and inpatient status, and cancellation of pre-admission, offering practical guidance for public hospitals. The authors argue that pre-admission requires tripartite collaboration among hospitals, insurers, and healthcare administrations: hospitals should establish top-level design, continuously refine processes, and implement dynamic risk assessment mechanisms; insurance providers should support cross-period settlement policies; and healthcare administrations should issue guiding policies or standardized protocols. Through multi-department coordination and collaborative efforts, the optimization and innovation of pre-admission processes can be advanced, ultimately delivering more efficient and convenient healthcare experiences for patients.

Oral diseases concern almost every individual and are a serious health risk to the popula-tion.The restorative treatment of tooth and jaw defects is an important means to achieve oral function and support the appearance of the contour.Based on the principle of"learning from the nature",Deng Xu-liang's group of Peking University School and Hospital of Stomatology has proposed a new concept of"microstructural biomimetic design and tissue adaptation of tooth/jaw materials"to address the worldwide problems of difficulty in treating dentine hypersensitivity,poor prognosis of restoration of tooth defects,and vertical bone augmentation of alveolar bone after tooth loss.The group has broken through the bottle-neck of multi-stage biomimetic technology from the design of microscopic features to the enhancement of macroscopic effects,and invented key technologies such as crystalline/amorphous multi-level assembly,ion-transportation blocking,and multi-physical properties of the micro-environment reconstruction,etc.The group also pioneered the cationic-hydrogel desensitizer,digital stump and core integrated restora-tions,and developed new crown and bridge restorative materials,gradient functionalisation guided tissue regeneration membrane,and electrically responsive alveolar bone augmentation restorative membranes,etc.These products have established new clinical strategies for tooth/jaw defect repair and achieved inno-vative results.In conclusion,the research results of our group have strongly supported the theoretical im-provement of stomatology,developed the technical system of oral hard tissue restoration,innovated the clinical treatment strategy,and led the progress of the stomatology industry.

Objective To investigate the clinical effect of unilateral percutaneous vertebroplasty(PVP)combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture.Methods A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study,all of which were vertebral body compression fractures caused by trauma.According to different treatment methods,they were di-vided into experimental group and control group.Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group,there were 5 males and 27 females,aged from 63 to 91 years old with an average of(77.59±8.75)years old.Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty,including 7 males and 38 females,aged from 60 to 88 years old with an average of(74.89±7.37)years old.Operation time,intraoperative C-arm X-ray times,anesthetic dosage,bone cement injection amount,bone cement diffusion good and good rate,complications,vertebral height,kyphotic angle(Cobb angle),visual analogue scale(VAS),Oswestry disability index(ODI)and other indicators were recorded before and after surgery,and statistically analyzed.Results All patients were followed up for 6 to 23 months,with preoperative imaging studies,confirmed for thoracolumbar osteoporosis com-pression fractures,two groups of patients with postoperative complications,no special two groups of patients'age,gender,body mass index(BMI),time were injured,the injured vertebral distribution had no statistical difference(P＞0.05),comparable data.Two groups of patients with bone cement injection,bone cement dispersion rate,preoperative and postoperative vertebral body height,protruding after spine angle(Cobb angle),VAS,ODI had no statistical difference(P＞0.05).The operative time,intra-operative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P＜0.05).Compared with the traditional bilateral puncture group,the modified unilateral puncture group combined with 3D printing technology had shorter operation time,fewer intraoperative fluoroscopy times and less anesthetic dosage.The height of anterior vertebral edge,kyphosis angle(Cobb angle),VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P＜0.05).Conclusion In the treatment of thoracolumbar osteoporotic compression fractures,3D printing technology is used to improve unilateral puncture PVP,which is convenient and simple,less trauma,short operation time,fewer fluoroscopy times,satisfactory distribution of bone cement,vertebral height recovery and kyphotic Angle correction,and good functional improvement.

Objective:To investigate the dosimetric effects of complex cardiac-respiratory motion in cardiac stereotactic body radiotherapy (CSBRT).Methods:A cardiac motion phantom was employed to simulate patient-specific cardiac-respiratory motion in 10 cases. The measured doses obtained under the phantom motion state were compared with the calculated doses in radiotherapy treatment planning for clinical patients. Moreover, 18 groups of design-based cardiac-respiratory motion were simulated. The radiation doses under the phantom motion state were measured using radiochromic films and compared with those under the resting state.Results:In the patient-specific cardiac-respiratory motion group, the gamma passing rate (GPR) under the 3%/2 mm standard between the measured and the calculated doses was 90.0% ± 7.0%. The correlation coefficient of the respiratory motion amplitude in the superior-inferior (SI) dimension with the GPR was -0.86 ( P=0.01). In the design-based cardiac-respiratory motion groups, the increase in the amplitude of cardiac-respiratory motion reduced the consistency between the dynamic dose and the static reference dose. Especially, the increase in the respiratory motion amplitude produced the most pronounced effect, reducing the width of the 90% isodose line in the respiratory motion direction, with a mean slope of -1.6. Additionally, the increase in the penumbra corresponds to a mean slope of 1.4. Conclusions:The respiratory motion amplitude serves as a primary factor influencing the dose accuracy of CBSRT. The characteristics and dosimetric effects of cardiac-respiratory motion are patient-specific, thus necessitating the assessment of cardiac-respiratory motion characteristics before CBSRT to individualize the application of motion management techniques for enhanced treatment accuracy.

Objective:To investigate the dosimetric feasibility of cardiac stereotactic body radiotherapy (CSBRT) using volumetric-modulated arc radiotherapy (VMAT)-like technique on the Unity MR-linac.Methods:A retrospective analysis was conducted on 12 refractory arrhythmia patients who underwent CSBRT at West China Hospital, Sichuan University, from April 2021 to December 2022. Four different treatment plans were designed for each patient based on the average phase of 4DCT: VMAT plan based on a linear accelerator, VMAT-like plan with magnetic field based on Unity, VMAT-like plan without magnetic field based on a Unity, and static intensity-modulated radiation therapy (IMRT) plan with 7 beams based on Unity. The VMAT-like plans used static IMRT beams evenly distributed at 30 angles. Evaluation metrics included conformity index (CI), homogeneity index (HI), gradient index (GI), dosimetric parameters of organs at risk (OAR), optimization time, and monitor unit (MU). These metrics among groups were analyzed using the Wilcoxon paired signed-rank test.Results:The CI of the VMAT plan was better than that of the VMAT-like plan with magnetic field (0.84 vs. 0.81, P=0.005). The GI of the VMAT-like plan without magnetic field was significantly lower than that of VMAT-like plan with magnetic field ( P=0.015). The CI and HI of the IMRT plan were both inferior to VMAT-like plan with magnetic field ( P=0.034). The average dose to the heart and lungs in VMAT-like plan with magnetic field was higher than those in the VMAT plan and VMAT-like plan without magnetic field (both P<0.05). The magnetic field significantly increased the dose to the skin, tissue-lung interface, and outside the margins (all P<0.05). The optimization time of the VMAT-like plan with magnetic field was longer than that of the IMRT plan, but it required fewer MUs ( P=0.001). The quality of the IMRT plans was poor and did not meet clinical requirements. Conclusion:The quality of CSBRT plans based on VMAT-like techniques meets clinical requirements, but attention must be paid to the dosimetric effects of the magnetic field.

Objective To investigate the clinical characteristics and prognosis of pneumococcal meningitis(PM),and drug sensitivity of Streptococcus pneumoniae(SP)isolates in Chinese children.Methods A retrospective analysis was conducted on clinical information,laboratory data,and microbiological data of 160 hospitalized children under 15 years old with PM from January 2019 to December 2020 in 33 tertiary hospitals across the country.Results Among the 160 children with PM,there were 103 males and 57 females.The age ranged from 15 days to 15 years,with 109 cases(68.1% )aged 3 months to under 3 years.SP strains were isolated from 95 cases(59.4% )in cerebrospinal fluid cultures and from 57 cases(35.6% )in blood cultures.The positive rates of SP detection by cerebrospinal fluid metagenomic next-generation sequencing and cerebrospinal fluid SP antigen testing were 40% (35/87)and 27% (21/78),respectively.Fifty-five cases(34.4% )had one or more risk factors for purulent meningitis,113 cases(70.6% )had one or more extra-cranial infectious foci,and 18 cases(11.3% )had underlying diseases.The most common clinical symptoms were fever(147 cases,91.9% ),followed by lethargy(98 cases,61.3% )and vomiting(61 cases,38.1% ).Sixty-nine cases(43.1% )experienced intracranial complications during hospitalization,with subdural effusion and/or empyema being the most common complication[43 cases(26.9% )],followed by hydrocephalus in 24 cases(15.0% ),brain abscess in 23 cases(14.4% ),and cerebral hemorrhage in 8 cases(5.0% ).Subdural effusion and/or empyema and hydrocephalus mainly occurred in children under 1 year old,with rates of 91% (39/43)and 83% (20/24),respectively.SP strains exhibited complete sensitivity to vancomycin(100% ,75/75),linezolid(100% ,56/56),and meropenem(100% ,6/6).High sensitivity rates were also observed for levofloxacin(81% ,22/27),moxifloxacin(82% ,14/17),rifampicin(96% ,25/26),and chloramphenicol(91% ,21/23).However,low sensitivity rates were found for penicillin(16% ,11/68)and clindamycin(6% ,1/17),and SP strains were completely resistant to erythromycin(100% ,31/31).The rates of discharge with cure and improvement were 22.5% (36/160)and 66.2% (106/160),respectively,while 18 cases(11.3% )had adverse outcomes.Conclusions Pediatric PM is more common in children aged 3 months to under 3 years.Intracranial complications are more frequently observed in children under 1 year old.Fever is the most common clinical manifestation of PM,and subdural effusion/emphysema and hydrocephalus are the most frequent complications.Non-culture detection methods for cerebrospinal fluid can improve pathogen detection rates.Adverse outcomes can be noted in more than 10% of PM cases.SP strains are high sensitivity to vancomycin,linezolid,meropenem,levofloxacin,moxifloxacin,rifampicin,and chloramphenicol.[Chinese Journal of Contemporary Pediatrics,2024,26(2):131-138]

Objective To investigate the change trend of quality of life(QOL)during postoperative 6 months in the patients with implanted cardiac pacemaker(PM)in order to provide a basis for the medical staff to implement the targeted nursing measures.Methods A prospective study design was used.The stratified sampling was adopted to select 252 inpatients with PM implantation in the cardiology department of a class 3A hospital in Guizhou Province as the respondents.The pacemaker patient quality of life measuring scale(QLIP-Pv1.0)was used to conduct the survey on the patients at discharged,in 1,3,6 months after PM implantation.Results There were statistically significant differences in the physical function,general cognitive function,psychological function,social function and total score of QLIPPv1.0 among different measuring times(P＜0.001).By using LSD afterwards pairwise comparison,the scores of physical function,general cognitive func-tion and total score were:6 months after implantation＞3 months after implantation＞1 month after implantation＞discharge day(P＜0.05),the scores of psychological function and social function were:6 months after implantation,3 months after implantation,1 month after implantation＞discharge day(P＜0.05),6 months after implantation＞3 months after implantation(P＜0.05).The QLIPPv1.0 scores at post-operative different times in the patients with implanted PM were different and showed the constantly ascend-ing trend with time passing.For each additional measurement,the QLIPPv1.0 score was increased by 6.527 points(β=6.527,P＜0.001).QOL of the patients with PM implantation was affected by many factors,inclu-ding marital status,educational level,employment status,family monthly income and pacemaker type.Conclu-sion QOL of the patients with PM implantation shows the dynamic change over time.The psychological function and social support in 1-3 months after implantation could not be ignored.Medical staff could take the targeted intervention measures according to the changing characteristics and influencing factors during dif-ferent periods.

Humans ; Beijing ; Hand, Foot and Mouth Disease/epidemiology* ; China/epidemiology*

Rheumatoid arthritis(RA) is a widely prevalent autoimmune inflammatory disease that severely affects patients' quality of life. Currently, conventional formulations against RA have several limitations, such as nonspecificity, poor efficacy, large drug dosages, frequent administration, and systemic side effects. Nanotechnology-based drug delivery systems have emerged as a promising stra-tegy for the diagnosis and treatment of RA since nanotechnology can overcome the limitations of traditional treatments and simplify the complexity of the disease. These systems enable targeted delivery of anti-inflammatory drugs to the inflamed areas through active and passive targeting, achieving specificity to the joints, overcoming the need for increased dosage and administration frequency, and reducing associated adverse reactions. This article aimed to review nanocarrier-based drug delivery systems in the field of RA and elucidate how nanosystems can be utilized to deliver therapeutic drugs to inflamed joints for controlling RA progression. By discussing the current issues and challenges faced by nanodrug delivery systems and highlighting the urgent need for solutions, this article offers theoretical support for further research on nanotechnology-based co-delivery systems in the future.
Humans ; Quality of Life ; Drug Delivery Systems ; Arthritis, Rheumatoid/drug therapy* ; Autoimmune Diseases/drug therapy* ; Nanotechnology

ObjectiveTo investigate whether phosphodiesterase （PDE） 5 inhibitors sildenafil （SIL） or LW1646 prevented renal interstitial fibrosis induced by unilateral ureteral obstruction （UUO）. MethodsMale C57BL/6 mice were randomly divided into four groups （n =6）， namely the Sham group， 7UUO group， 7UUO+SIL group and 7UUO+LW1646 group. Sildenafil （SIL） or LW1646， or vehicle was administered 1 hour before surgery， and the mice were continuously treated once daily （i. g.， 50 mg/kg） for 7 days. The obstructed kidneys were harvested on day 7. Hematoxylin-eosin （HE） and Masson’s staining was used to examine renal histology. Immunoblotting and RT-qPCR were used to detect the expression levels of protein and mRNA for fibrosis， apoptosis， endoplasmic reticulum （ER） stress， autophagy， and pro-fibrotic factors. Human proximal tubule epithelial cells （HK-2） were treated with TGF-β1 for 48 hours or tunicamycin for 24 hours， respectively， to evaluate whether cyclic guanosine monophosphate （cGMP） or PDE5 inhibitors prevents ER stress and pro-fibrotic responses. ResultsAt the 7^th days after UUO， the body weight of the mice showed a significant decrease （P< 0.000 1） compared with that in the sham group. The obstructed kidneys showed a significant tubular dilation and interstitial inflammation. The levels of protein and mRNA expression in apoptosis， ER stress， autophagy-related protein and pro-fibrotic factors were also markedly increased in UUO mice （P <0.05）. In contrast， SIL or LW1646 treatment was associated with attenuated tubular dilation， infiltration of inflammatory cells and collagen content in the obstructed kidney of the mice. The protein and mRNA expression levels of renal TGF-β1 were markedly decreased， and the protein expression levels of apoptosis， endoplasmic reticulum stress， and autophagy markers were also significantly downregulated by PDE5 inhibitors. In HK-2 cells， TGF-β1 induced increased expression levels of fibronectin and BiP， which was at least partially reversed by cGMP， a product of PDE inhibition. Additionally， PDE5 inhibitors were found to modulate aberrant levels of autophagy and apoptosis. ConclusionIn conclusion， PDE5 inhibitors， in particular， LW1646， can alleviate the progression of fibrosis by improving ER stress， apoptosis and autophagy as well as downregulating protein and mRNA expression of TGF-β1.