With the development of modern medical standards,autoimmune diseases and their associ-ated successive osteoporosis have received increasing attention in recent years.Patients with autoimmune diseases,due to the characteristics of the disease and the prolonged use of glucocorticoid hormone thera-py,may affect the bone formation and bone absorption of the patient,followed by severe successive osteo-porosis,thereby increasing the risk of osteoporotic vertebral fractures.Vertebral compression fractures of the spine are common fracture types in patients with osteoporotic fractures.Osteoporosis is a common complication after glucocorticoid therapy in patients with autoimmune diseases.Percutaneous vertebro-plasty(PVP)and percutaneous kyphoplasty(PKP)are minimally invasive operation and are commonly used surgical methods for the treatment of osteoporotic vertebral compression fractures.However,due to the operation of spinal puncture during the operation,there are serious surgical risks such as bone cement leakage,spinal epidural hemorrhage,subdural hemorrhage,and subarachnoid hemorrhage in both PVP and PKP.As a result,it is necessary to evaluate the patient's body before surgery carefully,especially in the case of blood coagulation.This article reports a case of autoimmune disease patient admitted to Peking University People's Hospital due to lumbar 4 vertebral compression fracture combined with Sj?gren's syn-drome.The patient's preoperative examination showed that the activated partial thromboplastin time(APTT)was significantly prolonged.After completing the APTT extended screening experiment and lu-pus anticoagulant factor testing,the multi-disciplinary team(MDT)of Peking University People's Hospi-tal jointly discussed the conclusion that the patient's test results were caused by an abnormal self-immuni-ty anti-copulant lupus(LAC).Based on the results of the laboratory examination,the patient was con-sidered to be diagnosed with combined antiphospholipid syndrome(APS).For such patients,compared with the patient's tendency to bleed,we should pay more attention to the risk of high blood clotting in the lower limbs of the patient,pulmonary clots and so on.With timely anti-coagulation treatment,the patient safely passed the peripheral period and was successfully discharged from the hospital.Therefore,for pa-tients with autoimmune diseases with prolonged APTT in the perioperative period,doctors need to careful-ly identify the actual cause and carry out targeted treatment in order to minimize the risk of surgical and perioperative complications and bring satisfactory treatment results to the patients.

Improving the reproducibility of biomedical research results is a major challenge. Transparent and accurate reporting of the research process enables readers to evaluate the reliability of the research results and further explore the experiment by repeating it or building upon its findings. The ARRIVE 2.0 guidelines, released in 2019 by the UK National Centre for the Replacement, Refinement and Reduction of Animals in Research (NC3Rs), provide a checklist that is applicable to any in vivo animal research report. These guidelines aim to improve the standardization of experimental design, implementation, and reporting, as well as enhance the reliability, repeatability, and clinical translation of animal experimental results. The use of the ARRIVE 2.0 guidelines not only enriches the details of animal experimental research reports, ensuring that information on animal experimental results is fully evaluated and utilized, but also enables readers to understand the content expressed by the author accurately and clearly, promoting the transparency and completeness of the fundamental research review process. At present, the ARRIVE 2.0 guidelines have been widely adopted by international biomedical journals. This article is based on the best practices following the ARRIVE 2.0 guidelines in international journals, and it interprets, explains, and elaborates in Chinese the fifth part of the comprehensive version of the ARRIVE 2.0 guidelines published in PLoS Biology in 2020 (the original text can be found at https://arriveguidelines.org). This section includes the items 6-11 of Recommended 11 section, covering "Animal Care and Monitoring", "Interpretation/Scientific Implications", "Generalisability/Translation", "Protocol Registration", "Data Access" and "Declaration of Interests". Its aim is to promote a comprehensive understanding and use of the ARRIVE 2.0 guidelines among domestic researchers, to enhance the standardization of experimental animal research and reporting, and to promote high-quality development of experimental animal sciences and comparative medicine research in China.

Objective:To investigate the clinicopathological features, immunophenotype, diagnosis and differential diagnosis of SRF-rearranged cellular perivascular myoid tumor.Methods:Two cases of SRF-rearranged cellular perivascular myoid tumor diagnosed in the Department of Pathology, Fudan University Shanghai Cancer Center from October 2021 to March 2022 were collected. Immunohistochemical staining, fluorescence in-situ hybridization (FISH) and next-generation sequencing (NGS) were performed, and the literature was reviewed.Results:Case 1, a 3-month-old boy presented with a painless tumor of the scalp, measuring about 2 cm in diameter. Case 2, a 3-year-old girl complained with a painless tumor of the knee, measuring approximately 1.5 cm in diameter. Microscopically, the tumor had a clear boundary and showed multinodular growth. The tumor was mainly composed of spindle cells arranged in long intersecting fascicles associated with thin, slit-like or branching ectatic vessels, focally forming hemangiopericytoma-like appearance. The tumor cells were abundant, but there was no obvious atypia. Mitotic figures (3-4/10 HPF) were noted. H-caldesmon and SMA were positive in both cases. Case 1 showed diffuse and strong positivity for Desmin, and focally for CKpan. Ki-67 proliferation index was 20% and 30%, respectively. FISH displayed NCOA2 gene translocation in case 1 and the RELA gene translocation in case 2. NGS detected the SRF-NCOA2 gene fusion in case 1 and the SRF-RELA gene fusion in case 2. Both patients underwent local excisions. During the follow-up of 5-14 months, case 1 had no local recurrence, while case 2 developed local recurrence 1 year post operatively.Conclusions:SRF-rearranged cellular perivascular myoid tumor is a novel variant of perivascular cell tumor, which tends to occur in children and adolescents. The tumor forms a broad morphologic spectrum ranging from a pericytic pattern to a myoid pattern, and include hybrid tumors with a mixture of pericytic and myoid patterns. Due to its diffuse hypercellularity and increased mitotic figures and smooth muscle-like immunophenotype, the tumor is easy to be misdiagnosed as myogenic sarcomas. The tumor usually pursues a benign clinical course and rare cases may locally recur.

With the continuous development of science and technology,environmental pollution has become increasingly severe,which makes environmental monitoring crucial.In recent years,electrochemical sensing strategy has attracted wide attention due to its advantages such as low cost,easy operation and fast detection speed.However,the detection performance still faces many challenges such as low sensitivity,high limit of detection and poor selectivity.Metal-organic frameworks(MOFs)is a kind of ordered network porous crystal formed by the coordination bond of organic ligands and metal ions/ion clusters,which can be used to prepare high-performance electrode materials for construction of electrochemical sensors because of their characteristics of large specific surface area,adjustable pore size and diverse structure.However,the poor conductivity and stability of MOFs result in poor electrochemical detection performance,which seriously limits their extensive applications in the field of electrochemistry.Combining MOFs with other functional materials can not only overcome the inherent defects of MOFs but also have the superior properties of both MOFs and functional materials,and the synergistic effect between MOFs and functional materials is conducive to improving the detection performance.Therefore,MOFs composites have been widely used in the electrochemical detection of environmental pollutants.This paper reviewed the applications progress of electrochemical sensors based on MOFs composites(MOFs combine with carbon materials,conductive polymers,metal nanoparticles or MOFs)in detection of environmental pollutants(Pesticides,heavy metal ions,phenolic compounds and nitrites)in the past five years.The prospects and challenges of electrochemical sensors based on MOFs composites for detection of environmental pollutants were also discussed.

Objective To monitor the antifungal resistance of clinical isolates of Candida spp.in the East China region.Methods MALDI-TOF MS or molecular methods were used to re-identify the strains collected from January 2018 to December 2022.Antifungal susceptibility testing was performed using the broth microdilution method.The susceptibility test results were interpreted according to the breakpoints of 2022 Clinical and Laboratory Standards Institute(CLSI)documents M27 M44s-Ed3 and M57s-Ed4.Results A total of 3 026 strains of Candida were collected,65.33％of which were isolated from sterile body sites,mainly from blood(38.86％)and pleural effusion/ascites(10.21％).The predominant species of Candida were Candida albicans(44.51％),followed by Candida parapsilosis complex(19.46％),Candida tropicalis(13.98％),Candida glabrata(10.34％),and other Candida species(0.79％).Candida albicans showed overall high susceptibility rates to the 10 antifungal drugs tested(the lowest rate being 93.62％).Only 2.97％of the strains showed dose-dependent susceptibility(SDD)to fluconazole.Candida parapsilosis complex had a SDD rate of 2.61％and a resistance rate of 9.42％to fluconazole,and susceptibility rates above 90％to other drugs.Candida glabrata had a SDD rate of 92.01％and a resistance rate of 7.99％to fluconazole,resistance rates of 32.27％and 48.24％to posaconazole and voriconazole non-wild-type strains(NWT),respectively,and susceptibility rates above 90％to other drugs.Candida tropicalis had resistance rates of 29.55％and 26.24％to fluconazole and voriconazole,respectively,resistance rates of 76.60％and 21.99％to posaconazole and echinocandins non-wild-type strains(NWT),and a resistance rate of 2.36％to echinocandins.Conclusions The prevalence and species distribution of Candida spp.in the East China region are consistent with previous domestic and international reports.Candida glabrata exhibits certain degree of resistance to fluconazole,while Candida tropicalis demonstrates higher resistance to triazole drugs.Additionally,echinocandins resistance has emerged in Candida albicans,Candida glabrata,Candida tropicalis,and Candida parapsilosis.

In this study,the immunological characteristics of the PhoP protein were explored with a two-component system of Mycobacterium tuberculosis(Mtb).Bioinformatics was used to predict the B and T cell epitopes of the PhoP protein.A re-combinant expression plasmid was constructed by PCR analysis of the phoP sequence and cloning into the prokaryotic expres-sion vector pET-28a(+).Competent Escherichia coli BL21 cells were transformed with the recombinant plasmid and expres-sion was induced with IPTG.The recombinant PhoP protein was purified by affinity chromatography.Serum levels of PhoP-specific antibodies in Mtb-infected mice and tuberculosis(TB)patients were analyzed with an ELISA.BALB/c mice were im-munized with the PhoP recombinant protein by intramuscular injection.Sera of mice were collected and antibody titers were detected with an ELISA and specificity was assessed by West-ern blot analysis.Mouse splenocytes were isolated and the pro-portions of IFN-y-positive cells and cytokine levels were detec-ted with an ELISpot and ELISA,respectively.Bioinformatics i-dentified 24 B cell and 11 T cell epitopes of the PhoP protein.A prokaryotic recombinant vector of PhoP was successfully con-structed and the recombinant PhoP protein was obtained by purification.Specific antibody levels to PhoP in sera of Mtb in-fected mice and TB patients increased significantly,with preci-sion of 99.9％and 82.5％,and specificity of 100％,respectively.PhoP protein immunization successfully induced production of specific antibodies in mice.Stimulated by antigens in vitro,IL-2 and IFN-γ levels were significantly increased in the splenocytes of immunized mice.Immunization with the PhoP protein induce a humoral immune response and Thl-dominated cellular immu-nity,indicating that the PhoP protein was immunogenic with diagnostic efficacy for TB.These results lay a foundation to clari-fy the role of PhoP in Mtb infection and application for diagnosis and prevention of TB.

Improving the reproducibility of biomedical research results remains a major challenge. Transparent and accurate reporting of progress can help readers evaluate the reliability of research results and further explore an experiment by repeating or building upon its findings. The ARRIVE 2.0 guidelines, released in 2019 by the UK National Centre for the Replacement, Refinement, and Reduction of Animals in Research (NC3Rs), provide a checklist applicable to any in vivo animal research report. These guidelines aim to improve the standardization of experimental design, implementation, and reporting, as well as the reliability, repeatability, and clinical translatability of animal experimental results. The use of the ARRIVE 2.0 guidelines not only enriches the details of animal experimental research reports, ensuring that information on animal experimental results is fully evaluated and utilized, but also enables readers to understand the content expressed by the author accurately and clearly, promoting the transparency and integrity of the fundamental research review process. At present, the ARRIVE 2.0 guidelines have been widely adopted by international biomedical journals. This article is the second part of the Chinese translation of the complete interpretation of the ARRIVE 2.0 guidelines published in PLoS Biology in 2020 (original text can be found at https://arriveguidelines.org) and based on the best practices for following the ARRIVE 2.0 guidelines in international journals. This part includes Items 4-7 of "ARRIVE Essential 10" in the ARRIVE 2.0 guidelines: "Randomization", "Blinding", "Outcome Measurement", and "Statistical Methods". Our Chinese translated version aims to promote the full understanding and use of the ARRIVE 2.0 guidelines by domestic researchers, enhancing the standardization of experimental animal research and reporting, and promoting the high-quality development of experimental animal technology and comparative medicine research in China.

Improving the reproducibility of biomedical research results is a major challenge. Researchers reporting their research process transparently and accurately can help readers evaluate the reliability of the research results and further explore the experiment by repeating it or building upon its findings. The ARRIVE 2.0 guidelines, released in 2019 by the UK National Centre for the Replacement, Refinement and Reduction of Animals in Research (NC3Rs), provide a checklist applicable to any in vivo animal research report. These guidelines aim to improve the standardization of experimental design, implementation, and reporting, as well as the reliability, repeatability, and clinical translatability of animal experimental results. The use of ARRIVE 2.0 guidelines not only enriches the details of animal experimental research reports, ensuring that information on animal experimental results is fully evaluated and utilized, but also enables readers to understand the content expressed by the author accurately and clearly, promoting the transparency and integrity of the fundamental research review process. At present, the ARRIVE 2.0 guidelines have been widely adopted by international biomedical journals. this article is a Chinese translation based on the best practices of international journals following the ARRIVE 2.0 guidelines in international journals, specifically for the complete interpretation of the ARRIVE 2.0 guidelines published in the PLoS Biology journal in 2020 (original text can be found at https://arriveguidelines.org). The first part of the article includes the preface and the "Key 10" section, which covers "study design" "sample size" and "inclusion and exclusion criteria". Its aim is to promote the full understanding and use of the ARRIVE 2.0 guidelines by domestic researchers, enhance the standardization of experimental animal research and reporting, and promote the high-quality development of experimental animal technology and comparative medicine research in China.

The function of the central nervous system was significantly altered under high-altitude hypoxia, and these changes lead to central nervous system disease and affected the metabolism of drugs in vivo. The blood-brain barrier is essential for maintaining central nervous system stability and plays a key role in the regulation of drug metabolism, and barrier structure and dysfunction affect drug transport to the brain. Changes in the structure and function of the blood-brain barrier and the transport of drugs across the blood-brain barrier under high-altitude hypoxia are regulated by changes in brain microvascular endothelial cells, astrocytes and pericytes, and are regulated by drug metabolism factors such as drug transporters and drug metabolizing enzymes. This article reviews the effects of high-altitude hypoxia on the structure and function of the blood-brain barrier and the effects of changes in the blood-brain barrier on drug metabolism. We investigate the regulatory effects and underlying mechanisms of the blood-brain barrier and related pathways such as transcription factors, inflammatory factors and nuclear receptors on drug transport under high-altitude hypoxia.

Malignant tumor is a major disease affecting human health. The nano-delivery system itself has a unique size effect and it can achieve tumor-targeted distribution of drug molecules, improve the therapeutic effect, and reduce the toxic and side effects on normal tissues and cells after functional modification. Patient-derived xenografts (PDX) models can be established by transplanting patient-derived cancer cells or small tumor tissue into immunodeficient mice directly. Compared with the tumor cell line model, this model can preserve the key features of the primary tumor such as histomorphology, heterogeneity, and genetic abnormalities, and keep them stable between generations. PDX models are widely used in drug evaluation, target discovery and biomarker development, especially providing a reliable research platform for the diagnosis and treatment evaluation of nano-delivery systems. This review summarizes the application of several common cancer PDX models in the evaluation of nano-delivery systems, in order to provide references for researchers to perform related research.