Objective: There is increased use of 3-dimensional (3D)-printing for manufacturing of interbody cages to create microscale surface features that promote bone formation. Those features may be vulnerable to abrasion and/or delamination during cage impaction. Our objective was to quantify loss of mass and changes in surface topography of 3D-printed titanium interbody cages due to surgical impaction. Methods: Eight surfaces of four 3D-printed titanium modular interbody fusion cages were tested. The cages were impacted into the Sawbones model with compression preload of either 200N or 400N using a guided 1-lb (0.45 kg) drop weight. Mass and surface roughness parameters of each endplate were recorded and compared for differences. Results: Significant weight loss was observed for the superior endplate group and for both 200N and 400N preloads. For pooled data comparison, significant postimpaction decreases were observed for mean roughness, root-mean-squared roughness, mean roughness depth, and total height of roughness profile. No significant differences were observed for profile skewness and kurtosis. There were significant changes in almost all roughness parameters in the anterior region of the cage postimpaction with significant changes in 2 out of 6 parameters in the middle, posterior, and central regions postimpaction. Conclusion Three-dimensional-printed titanium interbody fusion cages underwent loss of mass and alteration in surface topography during benchtop testing replicating physiologic conditions. There was an endplate- and region-specific postimpaction change in roughness parameters. The anterior surface experienced the largest change in surface parameters postimpaction. Our results have implications for future cage design and pre-approval testing of 3D-printed implants.

Objective: There is increased use of 3-dimensional (3D)-printing for manufacturing of interbody cages to create microscale surface features that promote bone formation. Those features may be vulnerable to abrasion and/or delamination during cage impaction. Our objective was to quantify loss of mass and changes in surface topography of 3D-printed titanium interbody cages due to surgical impaction. Methods: Eight surfaces of four 3D-printed titanium modular interbody fusion cages were tested. The cages were impacted into the Sawbones model with compression preload of either 200N or 400N using a guided 1-lb (0.45 kg) drop weight. Mass and surface roughness parameters of each endplate were recorded and compared for differences. Results: Significant weight loss was observed for the superior endplate group and for both 200N and 400N preloads. For pooled data comparison, significant postimpaction decreases were observed for mean roughness, root-mean-squared roughness, mean roughness depth, and total height of roughness profile. No significant differences were observed for profile skewness and kurtosis. There were significant changes in almost all roughness parameters in the anterior region of the cage postimpaction with significant changes in 2 out of 6 parameters in the middle, posterior, and central regions postimpaction. Conclusion Three-dimensional-printed titanium interbody fusion cages underwent loss of mass and alteration in surface topography during benchtop testing replicating physiologic conditions. There was an endplate- and region-specific postimpaction change in roughness parameters. The anterior surface experienced the largest change in surface parameters postimpaction. Our results have implications for future cage design and pre-approval testing of 3D-printed implants.

Objective: There is increased use of 3-dimensional (3D)-printing for manufacturing of interbody cages to create microscale surface features that promote bone formation. Those features may be vulnerable to abrasion and/or delamination during cage impaction. Our objective was to quantify loss of mass and changes in surface topography of 3D-printed titanium interbody cages due to surgical impaction. Methods: Eight surfaces of four 3D-printed titanium modular interbody fusion cages were tested. The cages were impacted into the Sawbones model with compression preload of either 200N or 400N using a guided 1-lb (0.45 kg) drop weight. Mass and surface roughness parameters of each endplate were recorded and compared for differences. Results: Significant weight loss was observed for the superior endplate group and for both 200N and 400N preloads. For pooled data comparison, significant postimpaction decreases were observed for mean roughness, root-mean-squared roughness, mean roughness depth, and total height of roughness profile. No significant differences were observed for profile skewness and kurtosis. There were significant changes in almost all roughness parameters in the anterior region of the cage postimpaction with significant changes in 2 out of 6 parameters in the middle, posterior, and central regions postimpaction. Conclusion Three-dimensional-printed titanium interbody fusion cages underwent loss of mass and alteration in surface topography during benchtop testing replicating physiologic conditions. There was an endplate- and region-specific postimpaction change in roughness parameters. The anterior surface experienced the largest change in surface parameters postimpaction. Our results have implications for future cage design and pre-approval testing of 3D-printed implants.

Objective: There is increased use of 3-dimensional (3D)-printing for manufacturing of interbody cages to create microscale surface features that promote bone formation. Those features may be vulnerable to abrasion and/or delamination during cage impaction. Our objective was to quantify loss of mass and changes in surface topography of 3D-printed titanium interbody cages due to surgical impaction. Methods: Eight surfaces of four 3D-printed titanium modular interbody fusion cages were tested. The cages were impacted into the Sawbones model with compression preload of either 200N or 400N using a guided 1-lb (0.45 kg) drop weight. Mass and surface roughness parameters of each endplate were recorded and compared for differences. Results: Significant weight loss was observed for the superior endplate group and for both 200N and 400N preloads. For pooled data comparison, significant postimpaction decreases were observed for mean roughness, root-mean-squared roughness, mean roughness depth, and total height of roughness profile. No significant differences were observed for profile skewness and kurtosis. There were significant changes in almost all roughness parameters in the anterior region of the cage postimpaction with significant changes in 2 out of 6 parameters in the middle, posterior, and central regions postimpaction. Conclusion Three-dimensional-printed titanium interbody fusion cages underwent loss of mass and alteration in surface topography during benchtop testing replicating physiologic conditions. There was an endplate- and region-specific postimpaction change in roughness parameters. The anterior surface experienced the largest change in surface parameters postimpaction. Our results have implications for future cage design and pre-approval testing of 3D-printed implants.

Objective: There is increased use of 3-dimensional (3D)-printing for manufacturing of interbody cages to create microscale surface features that promote bone formation. Those features may be vulnerable to abrasion and/or delamination during cage impaction. Our objective was to quantify loss of mass and changes in surface topography of 3D-printed titanium interbody cages due to surgical impaction. Methods: Eight surfaces of four 3D-printed titanium modular interbody fusion cages were tested. The cages were impacted into the Sawbones model with compression preload of either 200N or 400N using a guided 1-lb (0.45 kg) drop weight. Mass and surface roughness parameters of each endplate were recorded and compared for differences. Results: Significant weight loss was observed for the superior endplate group and for both 200N and 400N preloads. For pooled data comparison, significant postimpaction decreases were observed for mean roughness, root-mean-squared roughness, mean roughness depth, and total height of roughness profile. No significant differences were observed for profile skewness and kurtosis. There were significant changes in almost all roughness parameters in the anterior region of the cage postimpaction with significant changes in 2 out of 6 parameters in the middle, posterior, and central regions postimpaction. Conclusion Three-dimensional-printed titanium interbody fusion cages underwent loss of mass and alteration in surface topography during benchtop testing replicating physiologic conditions. There was an endplate- and region-specific postimpaction change in roughness parameters. The anterior surface experienced the largest change in surface parameters postimpaction. Our results have implications for future cage design and pre-approval testing of 3D-printed implants.

Background: and Purpose Cold beverage intake (carbonated drinks, fruit juice/drinks, and water) may be important population-level exposures relevant to stroke risk and prevention. We sought to explore the association between intake of these beverages and stroke. Methods: INTERSTROKE is an international matched case-control study of first stroke. Participants reported beverage intake using food frequency questionnaires or were asked “How many cups do you drink each day of water?” Multivariable conditional logistic regression estimated odds ratios (OR) and 95% confidence intervals (CI) for associations with stroke. Results: We include 13,462 cases and 13,488 controls; mean age was 61.7±13.4 years and 59.6% (n=16,010) were male. After multivariable adjustment, carbonated beverages were linearly associated with ischemic stroke (OR 2.39 [95% CI 1.64–3.49]); only consumption once/day was associated with intracerebral hemorrhage (ICH) (OR 1.58 [95% CI 1.23–2.03]). There was no association between fruit juice/drinks and ischemic stroke, but increased odds of ICH for once/day (OR 1.37 [95% CI 1.08–1.75)] or twice/day (OR 3.18 [95% CI 1.69–5.97]). High water intake (>7 cups/day) was associated ischemic stroke (OR 0.82 [95% CI 0.68–0.99]) but not ICH. Associations differed by Eugeographical region—increased odds for carbonated beverages in some regions only; opposing directions of association of fruit juices/drinks with stroke in selected regions. Conclusion Carbonated beverages were associated with increased odds of ischemic stroke and ICH, fruit juice/drinks were associated with increased odds of ICH, and high water consumption was associated with reduced odds of ischemic stroke, with important regional differences. Our findings suggest optimizing water intake, minimizing fruit juice/drinks, and avoiding carbonated beverages.

The aging population is an important issue around the world especially in developed countries. Although medical advances have substantially extended life span, the same cannot be said for the duration of health span. We are seeing increasing numbers of elderly people who are frail and/or have multiple chronic conditions; all of these can affect the quality of life of the elderly population as well as increase the burden on the healthcare system. Aging is mechanistically related to common medical conditions such as diabetes mellitus, ischemic heart disease, cognitive decline, and frailty. A recently accepted concept termed 'Accelerated Biological Aging' can be diagnosed when a person's biological age-as measured by biomarkers of DNA methylation-is older than their corresponding chronological age. Taurine, a conditionally essential amino acid, has received much attention in the past few years. A substantial number of animal studies have provided a strong scientific foundation suggesting that this amino acid can improve cellular and metabolic health, including blood glucose control, so much that it has been labelled one of the 'longevity amino acids'. In this review article, we propose the rationale that an adequately powered randomized-controlled-trial (RCT) is needed to confirm whether taurine can meaningfully improve metabolic and microbiome health, and biological age. This trial should incorporate certain elements in order to provide the much-needed evidence to guide doctors, and also the community at large, to determine whether this promising and inexpensive amino acid is useful in improving human metabolic health.