Background: Ameloblastic carcinoma is a malignant form of ameloblastoma and a very rare odontogenic tumor. We report a case of ameloblastic carcinoma that occurred after removal of a right-sided mandibular dental implant.Case presentation A 72-year-old female patient visited her family dentist with a complaint of pain around a lower right implant placed 37 years previously. Although the dental implant was removed with the diagnosis of periimplantitis, the patient experienced dullness of sensation in the lower lip and was followed up by her dentist, but after no improvement. She was referred to a highly specialized institution where she was diagnosed with osteomyelitis and treated the patient with medication; however, there was no improvement. In addition, granulation was observed in the same area leading to a suspicion of malignancy, and the patient was referred to our oral cancer center. The diagnosis of squamous cell carcinoma was made after a biopsy at our hospital. Under general anesthesia, the patient underwent mandibulectomy, right-sided neck dissection, free flap reconstruction with an anterolateral thigh flap, immediate reconstruction with a metal plate, and tracheostomy. Histological analysis of the resected specimen on hematoxylin and eosin staining showed structures reminiscent of enamel pulp and squamous epithelium in the center of the tumor. The tumor cells were highly atypical, with nuclear staining, hypertrophy, irregular nuclear size, and irregular nuclear shape, all of which were suggestive of cancer. Immunohistochemical analysis showed that Ki-67 was expressed in more than 80% of the targeted area, and the final diagnosis was primary ameloblastic carcinoma. Conclusion After reconstructive flap transplantation, occlusion was re-established using a maxillofacial prosthesis.The patient remained disease-free at the 1-year 3-month follow-up.

Background: Kissing molars (KMs) is defined as a state in which the apex of two impacted molars face opposite directions and the occlusal surfaces touch each other and the crown is in one follicle. Class III KMs have been reported previously; however, reports on class III KMs in young people (< 18 years of age) are limited.Case presentation Here, we present the case of KMs class III confirmed at an early age, supported by a review of the literature. The patient was a 16-year-old female and experienced discomfort in the left molar of the lower jaw and visited in our department. We diagnosed KMs based on an impacted teeth on the buccal side, near the lower jaw wisdom teeth, and a cyst-like low-density area observed around the crown of both teeth, as revealed by computed tomography. We decide to extract the tooth and enucleate the cyst under local anesthesia as the patient experienced discomfort due to occlusion. Furthermore, the cyst-like structure removal and tooth extraction including tooth root were necessary as the patient had KM class III, possibly inducing complicated malocclusion. Although no previous reports recommended timing for KMs tooth extraction, we propose that extraction at an early stage is important regardless of age especially in class III cases. Conclusions We report a case of KM class III detected at an early age.

Background: Mesiodentes are the most common supernumerary teeth. The cause is not fully understood, although proliferations of genetic factors and the dental lamina have been implicated. Mesiodentes can cause delayed or ectopic eruption of permanent incisors, which can further alter occlusion and appearance. Careful attention should be paid to the position and direction of the mesiodentes because of possible damage to adjacent roots in the permanent dentition period, errant extraction in the deciduous and mixed dentition periods, and damage to the permanent tooth embryo. To avoid these complications, we applied mixed reality (MR) technology using the HoloLens® (Microsoft, California). In this study, we report on three cases of mesiodentes extraction under general anesthesia using MR technology. Results: The patients ranged in age from 6 to 11 years, all three were boys, and the direction of eruption was inverted in all cases. The extraction approach was palatal in two cases and labial in one case. The average operative time was 32 min, and bleeding was minimal in all cases. No intraoperative or postoperative complications occurred. An image was shared preoperatively with all the surgeons using an actual situation model. Three surgeons used Microsoft HoloLens® during surgery, shared MR, and operated while superimposing the application image in the surgical field. Conclusions The procedure was performed safely; further development of MR surgery support systems in the future is suggested.

Background: With improvements in the safety and stability of surgeries, the number of orthognathic surgeries is increasing. Most patients who undergo orthognathic surgeries are younger, and the number of orthognathic surgeries for patients with comorbidities is also increasing. We report a survey and clinical investigation of patients with comorbidities who underwent orthognathic surgeries at our department to improve the safety of orthognathic surgery. Results: The participants included 296 men and 712 women, with a mean age of 28 years (13–19 years, n=144; 20–29 years, n=483; 30–39 years, n=236; 40–49 years, n=102; 50–59 years, n=39; ≥60 years, n=4). In total, 347 patients underwent one-stage Le Fort type I osteotomy and sagittal split ramus osteotomy (SSRO), 243 underwent SSRO, 287 underwent plate removal, 126 underwent genioplasty and plate removal, and five underwent other surgeries. In total, 529 patients had comorbidities (52%), including allergic diseases (n=220, 33%), respiratory diseases (n=107, 16%), neurologic and psychiatric diseases (n=69, 10%), gynecologic diseases (n=28, 4%), hematologic diseases (n=27, 4%), cardiovascular diseases (n=24, 4%), digestive diseases (n=22, 3%), metabolic and endocrine diseases (n=18, 3%), spinal diseases (n=11, 2%), ophthalmologic diseases (n=11, 2%), renal and urological diseases (n=9, 1%), and other diseases (n=117, 18%). Among the patients with comorbidities, 11 with hemorrhagic diatheses (hemophilia and von Willebrand disease), arrhythmia (atrioventricular block), psychiatric disease (adjustment disorder), and metabolic disease (diabetes) required cautious perioperative management. The patient with hemophilia was managed with regular low-dose recombinant factor VIII replacement therapy, and the patient with type I diabetes mellitus was administered continuous insulin infusion and sliding-scale insulin therapy; both patients had an uneventful course. Conclusions The study findings suggest that with the increase in orthognathic surgeries, oral and maxillofacial surgeons should adequately manage cases requiring cautious perioperative control and highlight the importance of preoperative screening. Despite the well-established safety and postoperative stability of orthognathic surgeries, oral surgeons should adopt appropriate additional preventive measures for patients with comorbidities.

Background: Excessive bleeding is a major intraoperative risk associated with orthognathic surgery. This study aimed to investigate the factors involved in massive bleeding during orthognathic surgeries so that safe surgeries can be performed. Patients (n=213) diagnosed with jaw deformities and treated with bimaxillary orthognathic surgery (Le Fort I osteotomy and bilateral sagittal split ramus osteotomy) in the Department of Oral and Maxillofacial Surgery at the Suidobashi Hospital, Tokyo Dental College between January 2014 and December 2016 were included. Using the patients’ medical and operative records, the number of cases according to sex, age at the time of surgery, body mass index (BMI), circulating blood volume, diagnosis of maxillary deformity, direction of maxillary movement, operative duration, incidence of bad split, injury of nasal mucosa, and blood type were analyzed. Results: The results revealed that BMI, circulating blood volume, nasal mucosal injury, and operative time were associated with the risk of intraoperative massive bleeding in orthognathic surgeries. Chi-square tests and binomial logistic regression analyses showed significant differences in BMI, circulating blood volume, direction of maxillary movement, operative duration, and injury to the nasal mucosa. Operative duration emerged as the most important risk factor. Furthermore, a >4-mm upward migration of the posterior nasal spine predicted the risk of massive bleeding in orthognathic surgery. Conclusions The upward movement of the maxilla should be recognized during the preoperative planning stage as a risk factor for intraoperative bleeding, and avoiding damage to the nasal mucosa should be considered a requirement for surgeons to prevent massive bleeding during surgery.

Background: Le Fort I osteotomy is a highly effective treatment for skeletal jaw deformities and is commonly performed. High Le Fort I osteotomy is a modified surgical procedure performed for improving the depression of the cheeks by setting the osteotomy higher than the conventional Le Fort I osteotomy. Developments in three-dimensional (3D) technology have popularized the use of 3D printers in various institutions, especially in orthognathic surgeries. In this study, we report a safe and inexpensive method of performing a high Le Fort I osteotomy using a novel 3D device and piezosurgery, which prevent tooth root injury without disturbing the operation field for patients with a short midface and long tooth roots. Results: A 17-year-old woman presented with facial asymmetry, mandibular protrusion, a short midface, and long tooth roots. We planned high Le Fort I osteotomy and bilateral sagittal split ramus osteotomy. Prevention of damage to the roots of the teeth and the infraorbital nerve and accurate determination of the posterior osteotomy line were crucial for clinical success. Le Fort I osteotomy using 3D devices has been reported previously but were particularly large in size for this case. Additionally, setting the fixing screw of the device was difficult, because of the risk of damage to the roots of the teeth. Therefore, a different surgical technique, other than the conventional Le Fort I osteotomy and 3D device, was required. The left and right parts of the 3D device were fabricated separately, to prevent any interference in the surgical field. Further, the 3D device was designed to accurately cover the bone surface from the piriform aperture to the infra-zygomatic crest with two fixation points (the anterior nasal spine and the piriform aperture), which ensured stabilization of the 3D device. The device is thin and does not interfere with the surgical field. Safe and accurate surgical performance is possible using this device and piezosurgery. The roots of the teeth and the infraorbital nerve were unharmed during the surgery. Conclusions This device is considerably smaller than conventional devices and is a simple, low-cost, and efficient method for performing accurate high Le Fort I osteotomy.

Background: Le Fort I osteotomy is a highly effective treatment for skeletal jaw deformities and is commonly performed. High Le Fort I osteotomy is a modified surgical procedure performed for improving the depression of the cheeks by setting the osteotomy higher than the conventional Le Fort I osteotomy. Developments in three-dimensional (3D) technology have popularized the use of 3D printers in various institutions, especially in orthognathic surgeries. In this study, we report a safe and inexpensive method of performing a high Le Fort I osteotomy using a novel 3D device and piezosurgery, which prevent tooth root injury without disturbing the operation field for patients with a short midface and long tooth roots. Results: A 17-year-old woman presented with facial asymmetry, mandibular protrusion, a short midface, and long tooth roots. We planned high Le Fort I osteotomy and bilateral sagittal split ramus osteotomy. Prevention of damage to the roots of the teeth and the infraorbital nerve and accurate determination of the posterior osteotomy line were crucial for clinical success. Le Fort I osteotomy using 3D devices has been reported previously but were particularly large in size for this case. Additionally, setting the fixing screw of the device was difficult, because of the risk of damage to the roots of the teeth. Therefore, a different surgical technique, other than the conventional Le Fort I osteotomy and 3D device, was required. The left and right parts of the 3D device were fabricated separately, to prevent any interference in the surgical field. Further, the 3D device was designed to accurately cover the bone surface from the piriform aperture to the infra-zygomatic crest with two fixation points (the anterior nasal spine and the piriform aperture), which ensured stabilization of the 3D device. The device is thin and does not interfere with the surgical field. Safe and accurate surgical performance is possible using this device and piezosurgery. The roots of the teeth and the infraorbital nerve were unharmed during the surgery. Conclusions This device is considerably smaller than conventional devices and is a simple, low-cost, and efficient method for performing accurate high Le Fort I osteotomy.

Major bleeding associated with sagittal split ramus osteotomy (SSRO) involves vessels such as the inferior alveolar, facial, and maxillary arteries and veins, and the retromandibular vein (RMV). The present study aimed to clarify and classify the three-dimensional variations in RMV position and course direction in relation to the mandible. Specimens comprised a total of 15 scientific cadavers, and the relationship between RMV and the mandible lateral and posterior views was observed.We identified 3 patterns on the lateral view, the mean distance between the RMV and the posterior border of the ramus was 3.9 mm at the height of the lingula. A total of five course patterns were identified on the posterior view. In no course pattern, the RMV inferior to the lingula was lateral to its position superior to the lingual. The present findings suggest that it may be possible to predict correlations with intraoperative bleeding risk. Further study is planned using contrast computed tomography in patients with jaw deformity for skeletal classification.

BACKGROUND: Le Fort I osteotomy is one of the surgical procedures now routinely and safely performed. It is possible to move the maxilla in three dimensions, but it is necessary to separate the bones around the maxillary sinus. Therefore, with surgery, maxillary sinus mucosal thickening occurs. By knowing the changes in the sinus mucosa after surgery and the factors affecting it, it is possible to better predict the outcomes of surgery and contribute to safer surgery. In this study, thickening of maxillary sinus mucosa before and after surgery in Le Fort I osteotomy was evaluated using multidetector-row computed tomography (MDCT) images, and the changes in mucosal thickening and the related factors were examined. METHODS: Using MDCT images, the maxillary sinus mucosa of 125 patients who had undergone Le Fort I osteotomy was retrospectively evaluated before surgery, 1 month after surgery, and 1 year after surgery. On the MDCT images, the maxillary sinus was judged as mucosal thickening and classified into three grades according to the proportion occupying the maxillary sinus. In the evaluation of factors related to mucosal thickening, the following eight factors were examined: sex, age, diagnosis, operating time, amount of postoperative bleeding, with/without bone graft, with/without multisegmental osteotomy, and with/without macrolide therapy after surgery. RESULTS: The mean age at the time of surgery was 25.6 ± 8 years. Of all 125 patients, 66 had bilateral thickening, 19 had unilateral thickening, and 40 had no thickening. Factors that were significantly related to mucosal thickening were the operative time for the maxilla, bone grafts, and macrolide therapy after surgery. CONCLUSIONS: Operative time for the maxilla, bone grafts, and macrolide therapy after surgery were found to be related to mucosal thickening. In addition, MDCT scanning 1 month after surgery was considered to be appropriate for evaluation of maxillary sinus mucosal thickening.
Diagnosis ; Hemorrhage ; Humans ; Maxilla ; Maxillary Sinus ; Mucous Membrane ; Multidetector Computed Tomography ; Operative Time ; Orthognathic Surgery ; Osteotomy ; Retrospective Studies ; Transplants

BACKGROUND: Reconstructive surgery is often required for tumors of the oral and maxillofacial region, irrespective of whether they are benign or malignant, the area involved, and the tumor size. Recently, three-dimensional (3D) models are increasingly used in reconstructive surgery. However, these models have rarely been adapted for the fabrication of custom-made reconstruction materials. In this report, we present a case of maxillary reconstruction using a laboratory-engineered, custom-made mesh plate from a 3D model.CASE PRESENTATION: The patient was a 56-year-old female, who had undergone maxillary resection in 2011 for intraoral squamous cell carcinoma that presented as a swelling of the anterior maxillary gingiva. Five years later, there was no recurrence of the malignant tumor and a maxillary reconstruction was planned. Computed tomography (CT) revealed a large bony defect in the dental-alveolar area of the anterior maxilla. Using the CT data, a 3D model of the maxilla was prepared, and the site of reconstruction determined. A custom-made mesh plate was fabricated using the 3D model (Okada Medical Supply, Tokyo, Japan). We performed the reconstruction using the custom-made titanium mesh plate and the particulate cancellous bone and marrow graft from her iliac bone. We employed the tunneling flap technique without alveolar crest incision, to prevent surgical wound dehiscence, mesh exposure, and alveolar bone loss. Ten months later, three dental implants were inserted in the graft. Before the final crown setting, we performed a gingivoplasty with palate mucosal graft. The patient has expressed total satisfaction with both the functional and esthetic outcomes of the procedure. CONCLUSION We have successfully performed a maxillary and dental reconstruction using a custom-made, pre-bent titanium mesh plate.