ObjectiveNonalcoholic fatty liver disease （NAFLD） is a metabolic stress liver injury. Ferroptosis is involved in the occurrence and development of NAFLD. Exploring the efficacy and mechanism of schisandrin B in treating NAFLD facilitates the development of strategies for the prevention and treatment of NAFLD. MethodsThe molecular structure of schisandrin B was obtained by searching against PubChem， and the related targets were predicted by SwissTargetPrediction. The active ingredients and their targets were retrieved from the Traditional Chinese Medicine Systems Pharmacology Database and Analysis Platform （TCMSP） and the high-throughput experiment- and reference-guide database of traditional Chinese medicine （HERB）. GeneCards and FerrDb were searched for the targets of NAFLD and ferroptosis. The common targets were taken as the core targets， and the protein-protein interaction network of the core targets was established. DAVID was used for gene ontology （GO） and Kyoto Encyclopedia of Genes and Genomes （KEGG） analyses. Finally， molecular docking was performed between schisandrin B and core targets， and the binding energy was calculated. C57BL/6 mice were fed with a methionine and choline-deficiency （MCD） diet for the modeling of NAFLD. Mice were randomized into normal， model， positive drug （essentiale）， and low- and high-dose schisandrin B groups. The body mass and liver index of mice were measured after drug administration. The levels of alanine aminotransferase （ALT） and aspartate aminotransferase （AST） in the serum and those of total cholesterol （TC）， triglyceride （TG）， malondialdehyde （MDA）， glutathione （GSH）， and Fe²⁺ in the liver homogenate were measured by biochemical assay kits. The pathological changes of the liver tissue were observed by hematoxylin-eosin （HE） and red oil O staining. Enzyme-linked immunosorbent assay was employed to determine the levels of interleukin （IL）-6， IL-1β， tumor necrosis factor （TNF）-α， and 4-hydroxynonenal （4-HNE） in the serum. Western blotting and real-time PCR were employed to determine the protein and mRNA levels， respectively， of solute carrier family 7 member 11 （SLC7A11）， solute carrier family 3 member 2 （SLC3A2）， glutathione peroxidase 4 （GPX4）， transferrin， and ferritin heavy chain （FTH） in the liver tissue. ResultsA total of 2 370， 2 547， and 1 451 targets of schisandrin B， NAFLD， and ferroptosis were obtained， in which 90 common targets were shared by the three. Enrichment analyses predicted 505 GO terms and 92 KEGG pathways. Molecular docking suggested that schizandrin B had strong binding affinity with the key targets of ferropstosis （SLC7A11 and SLC3A2）. Animal experiments showed that schizandrin B significantly decreased the liver index， lowered the levels of ALT， AST， TC， TG， IL-6， IL-1β， and TNF-α， alleviated hepatocyte ballooning and inflammatory cell infiltration， and reduced lipid accumulation in the liver of NAFLD mice. In addition， schisandrin B significantly lowered the levels of MDA， 4-HNE， and Fe²⁺， elevated the level of GSH， up-regulated the protein and mRNA levels of SLC7A11， SLC3A2， and GPX4， and down-regulated the protein and mRNA levels of transferrin in the liver tissue. ConclusionSchisandrin B can alleviate NAFLD by inhibiting ferroptosis in hepatocytes.

Abstract On September 26, 2024, a municipal hospital in Jiaxing City reported a maternal case of Listeria monocytogenes infection. In order to clarify the source of infection, the Jiaxing Center for Disease Control and Prevention immediately conducted the epidemiological investigation, laboratory testing and related disposal work. The case presented with fever (37.9 ℃), gradually intensifying paroxysmal abdominal pain without obvious cause, and went to hospital on the day of onset. Due to fetal intrauterine distress, a male infant was delivered by cesarean section on the same day. The epidemiological investigation identified that the case usually consumed fruits, often store fruits such as watermelon and grapes in the refrigerator alongside raw meat, and the refrigerator had never been cleaned or disinfected, posing a risk of cross contamination. Laboratory tests on amniotic fluid sample from the pregnant woman, infant blood sample showed positive results for Listeria monocytogenes infection. One strain of Listeria monocytogenes was detected in a smear sample from the inner wall of the refrigerator, and all the strains were ST2 type. Consuming fruits contaminated with Listeria monocytogenes may be the main source of infection. Food safety education for pregnant women and their family members should be strengthened to reduce the risk of infection.

The incidence and mortality of hepatocellular carcinoma (HCC) in China are among the highest in the world, imposing a heavy social burden. Liver resection and liver transplantation are the primary radical treatments for HCC, although most patients are no longer able to meet the surgical requirements at initial diagnosis. Yttrium-90 microsphere selective internal radiation therapy (⁹⁰Y-SIRT) has the advantages of shrinking tumors, enlarging residual liver, regressing portal vein tumor thrombus and improving the quality of life, which can be used for conversion, downstaging and bridging therapy for HCC before surgical treatment, enabling patients regain the chance of radical treatment and reducing the postoperative recurrence rate. This review focuses on the clinical application and progress of ⁹⁰Y-SIRT in this field.

Background Construction workers represent a high risk group for occupational injuries. Currently, domestic and international studies examining the factors affecting occupational injuries among construction workers focus on demographic and behavioural characteristics. However, there is limited attention to psychosocial, use of digital technology, and health status of workers. Objective To analyze the occurrence of occupational injuries among workers in the construction industry, explore impacts of psychosocial risk, use of digital technology, health status, and preventive measures at the workplace on occupational injuries, and provide a basis for the development of preventive measures. Methods Publicly available data from the European Union Occupational Safety and Health Administration were retrieved, comprising a sample of 2167 construction workers. The outcome indicator was the presence of occupational injuries among workers. A total of 25 variables in the dimensions of psychosocial risk, use of digital technology, health status, and preventive measures at the workplace were extracted after Chi-square test, and then a combination of Boruta's algorithm and logistic regression was applied to identify the key factors affecting occupational injuries. Results Among the 2167 construction workers surveyed, 182 (8.6%) reported experiencing occupational injuries. The Boruta algorithm identified eight characteristics which in descending order of importance were musculoskeletal disorders, job type, depression and anxiety, level of completed education, use of electronic smart products, timely solution of safety problems, overall fatigue, and age. The logistic regression results indicated that six variables had statistically significant effects on occupational injuries: age, job type, level of completed education, musculoskeletal disorders, overall fatigue, and timely solution of safety problems (P<0.05). Conclusion Occupational injuries in construction workers are influenced by a variety of factors, including age, job type, level of completed education, musculoskeletal disorders, overall fatigue, and timely solution of safety problems. Companies and workers should take targeted measures to reduce the incidence of occupational injuries.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.

OBJECTIVE To explore the association between the use of oral progesterone drugs in early pregnancy and gestational diabetes mellitus （GDM）. METHODS Through real-world retrospective cohort research method， pregnant women who underwent the oral glucose tolerance test （OGTT） at the Affiliated Maternal and Child Health Hospital of Nantong University between January 2022 and January 2023 were enrolled. Based on whether oral progesterone drugs were used in early pregnancy， they were divided into treatment group and control group； propensity score matching （PSM） with a 1∶1 ratio was employed to control for confounding factors； Logistic regression and linear regression were employed to analyze the association between drug factors （whether use of oral progesterone drug， duration of medication， dosage， and drug type） and outcome indicators （occurrence of GDM， fasting blood glucose levels， and OGTT 1 and 2 h blood glucose levels in late pregnancy）. RESULTS A total of 709 pregnant women were enrolled in the two groups before PSM； after PSM， 256 cases were included in both the treatment group and the control group. The results of association analysis indicated that there was no significant association between the use of oral progesterone drugs and GDM （P＞0.05）； but a significant correlation was found with OGTT 1 h blood glucose levels [β＝0.965， 95%CI （0.007，1.922）， P＜0.05]， specifically with Dydrogesterone tablets [β＝0.977， 95%CI （0.009， 1.944）， P＜0.05] and Progesterone soft capsules [β ＝1.089， 95%CI （0.077， 2.102）， P＜0.05]. There was no significant correlation between other drug factors and outcome indicators （P＞0.05）. CONCLUSIONS The use of oral progestogen drugs in early pregnancy is not significantly associated with GDM. The blood glucose levels in late pregnancy， especially OGTT 1 h blood glucose levels， have a certain correlation with Progesterone soft capsules and Dydrogesterone tablets.

BACKGROUND:Muscle aging is closely related to various epigenetic changes,and exercise has a certain regulatory effect on these epigenetic changes.However,the specific mechanism is not fully understood. OBJECTIVE:To review the epigenetic mechanisms of skeletal muscle and how exercise can improve skeletal muscle aging and promote adaptive changes in muscle through these epigenetic mechanisms,aiming to provide a more comprehensive understanding of skeletal muscle aging and disease mechanisms. METHODS:During the period from June 1st to August 1st,2023,literature searches were conducted for relevant literature published from database inception to August 2023 in databases including Web of Science,PubMed,CNKI,WanFang,and VIP.The search terms used included"skeletal muscle,""muscle,""aging,""older adult,""aging,""exercise,""physical exercise,""epigenetic,"and"epigenetics"in Chinese as well as"skeletal muscle,muscle,aging,older adult,senescence,age,exercise,sports,physical activity,epigenetic,epigenetics"in English.Boolean logic operators were used to connect the search terms for retrieval,and corresponding strategies were developed.According to the predetermined inclusion and exclusion criteria,70 eligible articles were selected. RESULTS AND CONCLUSION:Epigenetics refers to the phenomenon where gene expression and function are regulated without changes in gene sequence,and epigenetic changes in skeletal muscle are an important field.The epigenetic mechanisms of skeletal muscle play an important role in muscle aging,mainly involving DNA methylation,histone modification,regulation of non-coding RNAs,chromatin remodeling,changes in mitochondrial function and expression changes of aging-related genes.Exercise significantly regulates the epigenetics of skeletal muscle,including promoting DNA methylation,muscle histone modification,regulating miRNA expression,and regulating lncRNA expression,regulating muscle factors(such as interleukin-6),regulating mitochondrial function(such as peroxisome proliferators-activated receptors γ co-activator 1α).Future studies are recommended for long-term,cross-diverse population-based exercise interventions;the application of multi-omics techniques such as proteomics and metabolomics;strengthening the understanding of epigenetic changes at the single-cell level;cross-species comparative studies as well as human clinical trials for the translation of animal model findings to humans;strategies for combining exercise and pharmacological interventions to assess their synergistic effects;and epigenetic studies of crosstalk interactions between skeletal muscle and different organs.

BACKGROUND:Acupuncture is an effective method for lumbar pain in lumbar disc herniation,but its mechanism has not yet been clarified.Factors related to the JAK2/STAT3 signaling pathway regulate the body's inflammatory response and are involved in the process of neuropathic pain. OBJECTIVE:To study the mechanism of acupuncture on lumbar disc herniation in a rat model based on the JAK2/STAT3 signaling pathway. METHODS:Forty Sprague-Dawley rats were randomly divided into four groups:sham operation group,model group,acupuncture group,and acupuncture+agonist group,with 10 rats in each group.Animal models of L5 lumbar disc herniation was constructed through autologous disc cell transplantation in the model group,acupuncture group,and acupuncture+agonist group.Rats in the acupuncture group and the acupuncture+agonist group received acupuncture treatment(Yanglingquan,Shenshu,Huantiao,and Dachangshu acupoints)at 3 days after modeling,and acupuncture treatment was given once a day,20 minutes each,for 15 consecutive days.Rats in the acupuncture+agonist group were injected intrathecally with coumermycin A1,a JAK2 agonist,into the L4/L5 intervertebral space,once a day,20 minutes each,prior to the acupuncture at 6,12,and 18 days after modeling.Paw withdrawal mechanical threshold was detected before and 3,6,9,12,15,and 18 days after modeling.At 18 days after modeling,serum inflammatory factor levels were detected,hematoxylin-eosin staining was performed to observe the morphology of L5-L6 tissues,RT-PCR was performed to detect the expression of JAK2 and STAT3 mRNAs in L5-L6 tissues,and western blot was performed to detect the expression of JAK2,p-JAK2 and p-STAT3 proteins in L5-L6 tissues. RESULTS AND CONCLUSION:The paw withdrawal mechanical thresholds of rats in the model group at different time points after modeling were lower than those in the sham operation group(P<0.05),the paw withdrawal mechanical thresholds of rats in the acupuncture group were higher than those in the model group at 9,12,15,and 18 days after modeling(P<0.05),and the paw withdrawal mechanical thresholds of rats in the acupuncture+agonist group were lower than those in the acupuncture group at 9,12,15,and 18 days after modeling(P<0.05).The levels of interleukin 6,tumor necrosis factor α,neurotransmitter substance P,and brain neuropeptide Y were elevated in the model group compared with the sham operation group(P<0.05);the levels of all four inflammatory factors were reduced in the acupuncture group compared with the model group(P<0.05);and the levels of all four inflammatory factors were elevated in the acupuncture+agonist group compared with the acupuncture group(P<0.05).Hematoxylin-eosin staining showed that lumbar degeneration was obvious in the model group but reduced in the acupuncture group and the acupuncture+agonist group.Moreover,the reduction was more obvious in the acupuncture group compared with the acupuncture+agonist group.The JAK2 and STAT3 mRNA expression as well as the p-JAK2 and p-STAT3 protein expression were elevated in the model group compared with the sham operation group(P<0.05),were decreased in the acupuncture group compared with the model group(P<0.05),and were increased in the acupuncture+agonist group compared with the acupuncture group(P<0.05).To conclude,acupuncture can alleviate inflammation to exert analgesic effects in the rat model of lumbar disc herniation,and its mechanism of action may be related to the inhibition of the JAK2/STAT3 signaling pathway.

BACKGROUND:Post and core restoration is a common choice for tooth defects,but the repair effects of various post and core materials are different. OBJECTIVE:To evaluate the stress distribution at the post and core,tooth root,and bonding agent site of post and core models made of different elastic modulus post and core materials using finite element method. METHODS:A three-dimensional root canal treated maxillary central incisor model was built using three-dimensional modeling software,which was restored with a full ceramic crown.The post and core materials in the restoration used nanoceramic resin(elastic modulus=12.8 GPa),composite resin(elastic modulus=16 GPa),hybrid ceramic(elastic modulus=34.7 GPa),glass ceramic(elastic modulus=95 GPa),titanium alloy(elastic modulus=112 GPa),and zirconia(elastic modulus=209.3 GPa).The model was fixed in cortical bone.A 100 N concentrated force of 45° from the long axis of the tooth was applied to 1/3 of the crown and tongue side of the central incisor.The stress distribution of the post and core,dentin,and tooth-root bonding agent in the model was repaired by the maximum principal stress criterion. RESULTS AND CONCLUSION:(1)When the post and core materials with higher elastic modulus was used,the post-core stress in the repair model was more concentrated.When the elastic modulus of the post and core materials(nanoceramic resin and composite resin)was close to dentin,the stress distribution of the post and core was more uniform.The stress distribution of dentin in all restoration models was similar regardless of post and core materials.When the post and core with higher elastic modulus was used,more stress concentration was shown at the post and root bonding agent in the repair model.(2)The maximum stress values at the post and core,tooth root,and the bonding agent site of post and tooth root in the nanoceramic resin model were 31.00,33.21,and 0.51 MPa,respectively.The maximum stress values at the post and core,tooth root,and the bonding agent between the post and tooth root in the composite resin model were 36.84,33.14,and 0.59 MPa,respectively.In the mixed ceramic model,the maximum stress values at the post and core,tooth root,and the bonding agent between the post and tooth root were 64.05,32.83,and 1.00 MPa,respectively.In the glass ceramic model,the maximum stress values at the post and core,tooth root,and the bonding agent between the post and tooth root were 112.30,32.69,and 1.73 MPa,respectively.In the titanium alloy model,the maximum stress values of the post and core,tooth root,and the bonding agent between the post and tooth root were 120.00,32.17,and 1.86 MPa,respectively.In the zirconia model,the maximum stress values of the post and core,tooth root,and the bonding agent between the post and tooth root were 148.80,31.85,and 2.28 MPa,respectively.(3)The higher the elastic modulus of the post and core material,the higher the maximum stress at the post and core during restoration.The elastic modulus of the post and core material had no significant effect on the maximum stress of the dental bonding agent and dentin.

OBJECTIVE To optimize the simmering technology of Rheum palmatum from Menghe Medical School and compare the difference of chemical components before and after processing. METHODS Using appearance score， the contents of gallic acid， 5-hydroxymethylfurfural （5-HMF）， sennoside A+sennoside B， combined anthraquinone and free anthraquinone as indexes， analytic hierarchy process （AHP）-entropy weight method was used to calculate the comprehensive score of evaluation indicators； the orthogonal experiment was designed to optimize the processing technology of simmering R. palmatum with fire temperature， simmering time， paper layer number and paper wrapping time as factors； validation test was conducted. The changes in the contents of five anthraquinones （aloe-emodin， rhein， emodin， chrysophanol， physcion）， five anthraquinone glycosides （barbaloin， rheinoside， rhubarb glycoside， emodin glycoside， and emodin methyl ether glycoside）， two sennosides （sennoside A， sennoside B）， gallic acid and 5-HMF were compared between simmered R. palmatum prepared by optimized technology and R. palmatum. RESULTS The optimal processing conditions of R. palmatum was as follows: each 80 g R. palmatum was wrapped with a layer of wet paper for 0.5 h， simmered on high heat for 20 min and then simmered at 140 ℃， the total simmering time was 2.5 h. The average comprehensive score of 3 validation tests was 94.10 （RSD＜1.0%）. After simmering， the contents of five anthraquinones and two sennosides were decreased significantly， while those of 5 free anthraquinones and gallic acid were increased to different extents； a new component 5-HMF was formed. CONCLUSIONS This study successfully optimizes the simmering technology of R. palmatum. There is a significant difference in the chemical components before and after processing， which can explain that simmering technology slows down the relase of R. palmatum and beneficiate it.