Background Chlorinated perfluoroalkyl ether sulfonate Cl-PFAES, trade name F-53B, a novel per- and polyfluoroalkyl substance (PFAS), has been shown to induce multi-organ toxicity in humans and cross the blood-brain barrier. However, its toxic effects and underlying mechanisms on neural stem cells (NSCs) remain unclear. Objective To investigate the impact of F-53B on NSCs proliferation and differentiation through oxidative stress and explore its potential molecular mechanisms in associations with mitochondrial function damage and the expression of autophagy-related gene (PINK1/Parkin). Methods Primary NSCs isolated from neonatal C57BL/6 mice were used as a model and exposed to F-53B at concentrations of 0, 33, or 100 μmol·L⁻¹ for 24 h. Cell viability was assessed using the cell counting kit-8 (CCK-8) assay, while proliferation was evaluated by the 5-ethynyl-2’-deoxyuridine (EdU) incorporation assay. Immunofluorescence staining was performed to observe differentiation phenotypes. Intracellular and mitochondrial reactive oxygen species (ROS) levels were quantified using dihydroethidium (DHE) and MitoSOX probes, respectively. Mitochondrial morphology was observed using MitoTracker Green. ATP level was measured with a commercial kit. Additionally, real-time quantitative polymerase chain reaction (qPCR) was conducted to quantify the expression of PINK1 and Parkin genes. Results Exposure to 100 μmol·L⁻¹ F-53B significantly reduced cell viability to 93.6% of the control group (P<0.01), and decreased the proportion of EdU⁺ cells (P<0.01), indicating proliferation inhibition. The differentiation analysis showed a reduction in neuronal generation, axonal shortening, and an increase in astrocytes. The 100 μmol·L⁻¹ F-53B exposure elevated intracellular ROS to 122% (P<0.01) and mitochondrial ROS (MitoROS) to 135% (P<0.001) of the control levels, leading to mitochondrial fragmentation. The ATP levels after the F-53B exposure decreased to 62.4% relative to the control group (P<0.001). Furthermore, the mRNA expression levels of PINK1 and Par after the F-53B exposure were notably reduced (P<0.05). Conclusion F-53B may induce oxidative stress, thereby disrupting mitochondrial morphology and function while inhibiting the PINK1/Parkin-mediated mitophagy pathway, ultimately leading to impaired neural stem cell proliferation and abnormal differentiation. This study provides new insights into the neurotoxicity mechanisms of F-53B.

Background With the progression of industrialization, an increasing number of emerging contaminants are entering aquatic environments, posing significant threats to the safety of drinking water. Therefore, establishing a system for identifying unknown hazardous factors and implementing safety warning mechanisms for drinking water is of paramount importance. Among these efforts, non-target screening plays a critical role, but its effectiveness is largely constrained by the scope of coverage of sample pre-treatment methods. Objective To integrate modern chromatography/mass spectrometry techniques with advanced data mining methods to develop a non-discriminatory sample pre-treatment method for comprehensive enrichment of unknown contaminants in drinking water, laying a technical foundation for the discovery and identification of unknown organic hazardous factors in drinking water. Methods A non-discriminatory pre-treatment method based on supramolecular and solid-phase extraction was developed. The final target compounds including 333 pesticides, 194 pharmaceuticals and personal care products (PPCPs), and 59 per- and polyfluoroalkyl substances (PFASs) were used for optimizing the pre-treatment method, confirming its coverage. The impacts of different eluents on the absolute recovery rates of target compounds were compared to select the conditions with the highest recovery for sample pre-treatment. The effects of different supramolecular solvents and salt concentrations on target compound recovery were also evaluated to determine the most suitable solvent and salt concentration. Results The solid-phase extraction elution solvents, supramolecular extraction solvents, and salt concentrations were optimized based on the target compound recovery rates. The optimal recovery conditions were achieved using 2 mL methanol, 2 mL methanol (containing 1% formic acid), 2 mL ethyl acetate, 2 mL dichloromethane, hexanediol supramolecular solvent, and 426 mg salt. The detection method developed based on these conditions showed a good linear relationship for all target compounds in the range of 0.1-100.0 ng·mL⁻¹, with R² > 0.99. The method’s limit of detection ranged from 0.01 ng⁻¹ to 0.95 ng⁻¹, and 95% of target compounds were recovered in the range of 20%-120%, with relative standard deviation (RSD) less than 30%, indicating good precision. Conclusion The combined pre-treatment method of solid-phase extraction and supramolecular solvent extraction can effectively enrich contaminants in drinking water across low, medium, and high polarities, enabling broad-spectrum enrichment of diverse trace contaminants in drinking water. It provides technical support for broad-spectrum, high-throughput screening and identification of organic pollutants in drinking water, and also serves as a reference for establishing urban drinking water public safety warning systems.

Background Coal workers' pneumoconiosis is a serious occupational disease in China. Exhaled volatile organic compounds (VOCs) can serve as the "breath fingerprint" of internal pathological processes, which provides a theoretical basis for exhaled VOCs to be used as potential non-invasive biomarkers for early diagnosis of coal workers' pneumoconiosis. Objective To screen out the characteristic VOCs and important characteristic VOCs of exhaled air in patients with coal workers' pneumoconiosis, and to explore the potential of these VOCs as biomarkers for early non-invasive diagnosis of the disease. Methods In this study, 27 VOCs in the exhaled breath of 22 patients with stage I coal workers' pneumoconiosis, 77 workers exposed to dust, and 92 healthy controls were quantitatively detected by thermal desorption gas chromatography-mass spectrometry (TD-GC-MS). Substances with P<0.05 in univariate analysis and variable importance projection (VIP) >1 in supervised orthogonal partial least squares discriminant analysis (OPLS-DA) model were selected as the characteristic VOCs for early diagnosis of coal workers' pneumoconiosis. Age was included in the LASSO regression model as a covariate to screen out important characteristic VOCs, and the diagnostic performance was evaluated by receiver operating characteristic (ROC) curve. Spearman correlation was further used to explore the correlation between important characteristic VOCs and clinical lung function indicators. Results Through univariate analysis and OPLS-DA modeling, 8 VOCs were selected, including 2-methylpentane, 3-methylpentane, n-hexane, methylcyclopentane, n-heptane, methylcyclohexane, 4-methyl-2-pentanone, and 2-hexanone, in exhaled breath of patients with coal workers' pneumoconiosis. The concentrations of 4 VOCs, including 3-methylpentane, n-hexane, 4-methyl-2-pentanone, and 2-hexanone, showed a decreasing trend with the increase of dust exposure years. By LASSO regression, the important characteristic VOCs of the coal workers' pneumoconiosis group and the dust exposure group were n-hexane, methylcyclohexane and 4-methyl-2-pentanone, and the important characteristic VOCs of the coal workers' pneumoconiosis group and the healthy group were 2-methyl-pentane and 4-methyl-2-pentanone. The ROC analysis showed that the area under the curve (AUC) of n-hexane, methylcyclohexane, and 4-methyl-2-pentanone were 0.969, 0.909, and 0.956, respectively, and the AUC of combined diagnosis was 0.988 and its Youden index was 0.961, suggesting that these results can serve as a valuable reference for further research on early diagnosis. The Correlation analysis found that there was a positive correlation between n-hexane and lung function indicators in the important characteristic VOCs, indicating that it could indirectly reflect the obstruction of lung function ventilation, further proving that important characteristic VOCs have the potential to monitor lung function decline. Conclusion Three important characteristic VOCs selected in this study have the potential to be used as non-invasive biomarkers for early diagnosis and disease monitoring of coal workers' pneumoconiosis, and are worthy of further study and verification.

Background Per- and polyfluoroalkyl substances (PFAS) are a class of persistent organic pollutants that possess potential toxicity to the human body. The production and utilization of diverse emerging PFAS have resulted in widespread human exposure. Therefore, it is imperative to establish a quantitative methodology encompassing a wide range of PFAS for a comprehensive assessment of human exposure to these compounds. Objective To establish a high-throughput quantitative method for the simultaneous determination of 53 PFAS in human serum based on ultra-high-performance liquid chromatography-Q Exactive high resolution mass spectrometry (UPLC-Q Exactive HRMS). Methods The extraction recoveries of hydrophilic-lipophilic balance (HLB) column, weak anionexchange (WAX) column, and 96-well WAX μElution plate were compared to select the SPE column with the highest recovery. The retention time and peak shape of the target compounds were compared between ACQUITY UPLC BEH C₁₈ column and Accucore aQ column, and the more cost-effective column was chosen. The effects of adding different levels of ammonium formate (0, 2, 5 and 10 mmol·L⁻¹) in mobile phase on peak shape and target response were compared to determine the optimal buffer salt concentration. The optimal spray voltage was obtained by comparing −2 kV and −4 kV. The proposed method was validated from the aspects of selectivity, standard curve, limits of detection, precision, accuracy, and matrix effect. The method was applied to 142 umbilical serum samples. Results The best recovery rate (64%-118%) was achieved by using 96-well WAX μElution plate. The optimal separation and peak shape were obtained by utilizing Accucore aQ column with H₂O-methanol (containing 5 mmol·L⁻¹ ammonium formate) as the mobile phase. Less in-source collision and better target response were observed when the spray voltage was set to −2 kV. All target analytes had a good linearity, with R² > 0.99. The limits of detection ranged from 0.01 to 0.50 μg·L⁻¹, and the recovery ranged from 69% to 127% with the precision less than 26%. A total of 31 PFAS were detected in the 142 actual samples, among which 14 PFAS had a detection frequency over 50%. Perfluorooctanoic acid showed the highest median concentration of 4.16 μg·L⁻¹, followed by 6:2 chlorinated polyfluorinated ether sulfonate and perfluorooctane sulfonates (3.50 μg·L⁻¹ and 1.59 μg·L⁻¹, respectively). Conclusion In this study, we establish a UPLC-Q Excative HRMS method for simutanious determination of 53 PFAS concentrations in serum. This method has the advantages of wide coverage of PFAS, good selectivity, and easy operation, and is suitable for biological detection with a large sample size.

Objective To investigate the risk factors of postoperative complications in patients with spinal tuberculosis and analyze the value of prognostic nutritional index(PNI)in predicting these complications.Methods The clinical data of 156 patients with spinal tuberculosis who underwent surgery in the Affiliated Hospital of Zunyi Medical University from January 2018 to July 2022 were retrospectively analyzed.The patients were divided into a complication group and a non-complication group based on the presence or absence of postoperative complications.Baseline data,laboratory indicators,and surgery-related indicators were compared between the two groups.The risk factors for postoperative complications in spinal tuberculosis were analyzed,and receiver operating characteristic(ROC)curves were plotted to evaluate the predictive value of PNI for postoperative complications in the patients.Results Among all of 156 patients,68 contracted a total of 82 instances of postoperative complications,with an incidence of 43.59%.Coinfection with pulmonary tuberculosis,preoperative anti-tuberculosis treatment duration more than 4 weeks,surgical operation duration,and drainage days were identified as independent risk factors for postoperative complications in spinal tuberculosis(P<0.05).On the other hand,a higher PNI was found to be a protective factor against postoperative complications of the spinal tuberculosis(P<0.05).The area under the ROC curve for PNI predicting postoperative complications ofthe spinal tuberculosis was 0.805.Conclusion The risk of postoperative complications in patients with spinal tuberculosis is subject to such factors ascoexistence of pulmo-nary tuberculosis,preoperative anti-tuberculosis treatment duration,surgery duration,drainage duration,and preoperative PNI.Preoperative PNI has a certain value for predicting the postoperative complications in the patients.

BACKGROUND:Ankylosing spondylitis is a chronic inflammatory disease with chronic rheumatic immunity.Soft tissue ossification and fusion and spinal stiffness can cause biomechanical changes. OBJECTIVE:To reconstruct the lumbar-sacral intervertebral disc in ankylosing spondylitis patients with lumbar kyphosis by finite element analysis,and to study the range of motion of each segment of T11-S1 and the biomechanical characteristics of annulus fibrosus and nucleus pulposus. METHODS:The imaging data were obtained from an ankylosing spondylitis patient with lumbar kyphosis.The original CT image data of continuously scanned spine were imported into Mimics 21.0 in DICOM format,and T11-S1 was reconstructed respectively.The established model was imported into 3-Matic software in the format of"Stl"to reconstruct the intervertebral disc,and the fibrous intervertebral disc model was obtained.The improved model was further imported into Hypermesh software,and the vertebra,nucleus pulposus,annulus fibrosus and ligament were mesh-divided.After the material properties were given,the model was imported into ABAQUS software to observe the range of motion of each vertebral body in seven different working conditions of T11-S1,and analyze the biomechanical characteristics of each segment of annulus fibrosus and nucleus pulposus. RESULTS AND CONCLUSION:(1)The range of motion of L1 vertebrae was higher than that of other vertebrae under six different working conditions:extension,forward flexion,rotation(left and right),and lateral flexion(left and right).The maximum range of motion was 2.18° during L1 vertebral flexion,and the minimum range of motion was 0.12° during L5 vertebral extension.(2)The annular fiber flexion at L2-L3 segments was greater than the extension(P<0.05),and the annular fiber flexion at L3-L4 and L4-L5 segments was less than the extension(P<0.05).The left rotation of L1-L2 annular fibers was greater than the right rotation(P<0.05).The left flexion of the annulus was greater than the right flexion in L1-L2,L2-L3,L3-L4,L4-L5 and L5-S1 segments(P<0.05).(3)The nucleus pulposus stresses of T11-L12,L1-L2,L2-L3,L3-L4 and L4-L5 segments in forward flexion were greater than in extension(P<0.05).The left rotation of T12-L1 and L3-L4 segments was smaller than the right rotation(P<0.05),and that of T11-T12,L1-L2,and L2-L3 segments was larger than the right rotation(P<0.05).The left flexion was larger than the right flexion in the T11-S1 segment.(4)It is concluded that in ankylosing spondylitis patients with lumbar kyphosis,the minimum range of motion of the vertebral body is located at the L5 vertebral body in extension.To prevent fractures,it is recommended to avoid exercise in the extension position.During the onset of lumbar kyphosis in patients with ankylosing spondylitis,the maximum stress of the annulus fibrosus and nucleus pulposus is located in the L1-L2 segment,which is fixed and will not alter with the change of body position.The late surgical treatment and correction of deformity should focus on releasing the pressure of the annulus fibrosus and nucleus pulposus in this segment to avoid the rupture of the annulus fibrosus and the injury of the nucleus pulposus.

BACKGROUND:Ankylosing spondylitis is a progressive inflammation of spinal stiffness deformity caused by tissue ossification and fibrosis.The posture of ankylosing spondylitis patients is abnormal and their activities are limited that minor injuries can lead to thoracolumbar fractures.Traditional medical image observation limits doctors'preoperative decision planning and postoperative disease prevention for ankylosing spondylitis treatment. OBJECTIVE:Based on the spinal model of ankylosing spondylitis patients before and after posterior spinal cancellous ossification osteotomy("Y"osteotomy for short),to explore the biomechanical changes of"Y"osteotomy and fixation in the treatment of ankylosing spondylitis. METHODS:Based on the preoperative and postoperative CT images of an ankylosing spondylitis patient who went to the Second Affiliated Hospital of Inner Mongolia Medical University,a three-dimensional spine model(T11-S1)before and after"Y"osteotomy(L3 osteotomy)was reconstructed in Mimics 19.0 software.A 7.5 Nm torque was applied to the top of T11 vertebral body to simulate the movement of the spine under six conditions:flexion,extension,left bending,right bending,left rotation and right rotation.Finally,the range of motion of each vertebral body,the stress of each intervertebral disc,and the stress of the screw rod system were simulated. RESULTS AND CONCLUSION:(1)After"Y"type osteotomy and posterior fixation,the range of motion of all vertebrae in the spine decreased,and the loss rate of upper vertebrae was large(L1:77.95%).(2)The maximum stress of the spinal intervertebral disc before operation occurred at the L1-L2 segment(0.55 MPa),and the maximum stress of the spinal intervertebral disc after operation occurred at the T11-T12 segment(0.50 MPa),and the stress of intervertebral disc below T12 was far less than that before operation.(3)The maximum stress of the screw rod system(166.67 MPa)occurred in the upper and middle segments of the rod body and the root of the pedicle screw.(4)In conclusion,the"Y"type posterior fixation operation enhances the stability of the spine and reduces the range of motion of the spine.The vertebral body decompression of the fixed segment is great and the stress-shielding phenomenon of the lower vertebral body is significant.The stiffness of the rod body and the stress concentration area of the pedicle screw should be strengthened to avoid the fracture of the rod caused by stress fatigue.

[Objective] To determine the feasibility of preparing plasminogen (Pg) with Fraction Ⅲ precipitation (hereinafter referred to as FⅢ-P) from low-temperature ethanol process by full chromatography (hereinafter referred to as FⅢ-P process). [Methods] The FⅢ-P was diluted with dissolution buffer at different dilution times and stirring time. The potency and antigen concentration of Pg in dissolution sample were detected and the dissolution and clarification conditions were determined. Pre-treatment of loading sample and pre-experiment of affinity chromatography were carried out on the FⅢ-P dissolution sample to judge whether the loading sample had an impact on the chromatography by observing the performance of the affinity chromatography column and to evaluate whether the affinity chromatography could achieve the purpose of purifying Pg by detecting the plasma protein antigen concentration and Pg potency of the samples in the process. Two batches of FⅢ-P process were studied step by step, and the specific activity, steps and total recovery, and the output of Pg per ton of plasma were calculated. The feasibility of preparing Pg by FⅢ-P process was evaluated by comparing with the data of full chromatography process using plasma as raw material (hereinafter referred to as plasma process). [Results] The FⅢ-P was dissolved with 10 times of dissolution buffer, stirred for 1 hour, centrifuged at room temperature of 10 000×g for 15 minutes. The supernatant was first filtered with a screen, then clarified with an 8/0.8 μm filter, and finally filtered with a 0.45/0.2 μm filter and loaded. Pre-test showed that from clarification and filtration to Pg affinity chromatography, the step recovery of activity and antigen was 39.51% and 108.64%, respectively, the antigen concentration of Pg increased by 31.16 times and the activity increased by 11.39 times after affinity chromatography, which reaching the effect of affinity chromatography purification of Pg. The results of 2 batches of step-by-step scale-up FⅢ-P process showed that the total recoveries of antigen and activity from plasma to SP chromatography of FⅢ-P process were (45.76±1.10)% and (24.15±0.59)%, respectively, which had a total loss of about 1/3 of antigen and about 2/3 of activity compared to the plasma process. The Pg specific activity of SP chromatography eluent was (4.68±0.25) U/mg, which was about half of that of plasma process, but meeted the internal standard of > 4 U/mg. The output of Pg antigen per ton of plasma in the FⅢ-P process was 68.73% of that in the plasma process, and the output of Pg activity per ton of plasma in the plasma process was 29.82% of that in the plasma process, which basically achieved the purpose of waste utilization of FⅢ-P. [Conclusion] The technical route of preparing Pg from FⅢ-P by full chromatography is feasible.

The incidence of osteoporotic thoracolumbar vertebral fracture (OTLVF) in the elderly is gradually increasing. The kyphotic deformity caused by various factors has become an important characteristic of OTLVF and has received increasing attention. Its clinical manifestations include pain, delayed nerve damage, sagittal imbalance, etc. Currently, the definition and diagnosis of OTLVF with kyphotic deformity in the elderly are still unclear. Although there are many treatment options, they are controversial. Existing guidelines or consensuses pay little attention to this type of fracture with kyphotic deformity. To this end, the Lumbar Education Working Group of the Spine Branch of the Chinese Medicine Education Association and Editorial Committee of Chinese Journal of Trauma organized the experts in the relevant fields to jointly develop Clinical guidelines for the diagnosis and treatment of osteoporotic thoracolumbar vertebral fractures with kyphotic deformity in the elderly ( version 2024), based on evidence-based medical advancements and the principles of scientificity, practicality, and advanced nature, which provided 18 recommendations to standardize the clinical diagnosis and treatment.

Tissue engineering bone technology, grounded in seed cells, cytokines, and scaffold supports, provides an effective solution for addressing extensive bone defects, demonstrating significant potentials in the field of bone repair. However, this technology still faces numerous challenges. Focusing on vascularization in engineered bones, this article reviews various methods to enhance vascularization within tissue-engineered bones, including multicellular co-culture, application of angiogenic factors, advanced 3D printing, and aid of surgical interventions. This article also analyses the latest research developments and the limitations of the methods, and speculates future research directions for tissue engineered bone.