Objective To study the seasonal distribution characteristics of polycyclic aromatic hydrocarbons (PAHs) in PM_2.5 in Lianyungang City, and analyze the sources of PAHs pollution, and to evaluate the health risks of PAHs in different seasons. Methods PM2.5 samples were collected regularly from January 2019 to December 2023, and 16 types of PAHs were determined by HPLC. Kruskal-Wallis H test was used to compare the concentrations of PM2.5 and PAHs in different years and seasons. The source of PAHs was analyzed by characteristic ratio and principal component analysis (PCA). Health risks were assessed using the BaP equivalent method and the incremental lifetime cancer risk (ILCR) model. Results The annual exceedance rates of PM_2.5 and BaP in Lianyungang showed a decreasing trend from 2019 to 2023. PM_2.5, total PAHs and PAHs monomers (except Ace, Flu and Acy) all showed significant seasonal differences, with the highest concentration in winter (P<0.001). The average proportion of 4-ring PAHs was the highest and the average proportion of 2-ring PAHs was the lowest. The proportion of 5-6 ring PAHs was relatively high in winter and spring. PM2.5and PAHs were negatively correlated with temperature, relative humidity and precipitation, and were positively correlated with atmospheric pressure. PM_2.5 was negatively correlated with wind speed, while some PAHs monomers were positively correlated with wind speed. The characteristic ratio and PCA results showed that the main sources of PAHs in Lianyungang City were mixed sources of road dust and vehicle emissions, oil pollution sources and biomass combustion sources. The results of ILCR showed that the highest risk was found in adults, with males slightly higher than females. In Lianyungang, the maximum value of ILCR in winter was more than 10-6 in people over 9 years old. Conclusion The main sources of PAHs in PM_2.5 in Lianyungang City are mixed sources of road dust and vehicle emissions, oil pollution sources, and biomass combustion sources. Under the current exposure level of PAHs in PM_2.5, residents have a certain potential carcinogenic risk.

BACKGROUND:Congenital clubfoot mainly manifests as abnormal bone itself and abnormal cartilage development.The bone morphogenetic protein(BMP)/drosophila mothers against decapentaplegic protein(Smad)signaling pathway can direct the development of bone and cartilage during embryonic period,but its role in the field of clubfoot etiology has not been confirmed in animal experiments. OBJECTIVE:To explore the mechanism by which the BMP/Smad signaling pathway is involved in the regulation of foot and ankle chondroplasia in a rat congenital clubfoot model. METHODS:Sprague-Dawley rats at 10 days of gestation with the same growth condition were randomly divided into experimental and control groups.The experimental group was intragastrically given 135 mg/kg retinoic acid to make the clubfoot model,while the control group was given the same amount of vegetable oil.The fetal rats were taken out after 21 days of gestation by cesarean section.In the experimental group,the 27 of 41 fetal rats had clubfoot,with a deformity rate of 65.9%;in the control group,no clubfoot was observed in all the 36 fetuses.The ankles tissues of the rats were collected for hematoxylin-eosin staining.Western blot assay,RT-qPCR and immunohistochemistry were performed to detect the expression levels of Smad5 and P-Smad5,the core proteins of the BMP/Smad signaling pathway,as well as SP7 and Sox9,the downstream proteins of the BMP/Smad signaling pathway. RESULTS AND CONCLUSION:Compared with the control group,hematoxylin-eosin staining showed that the cartilage matrix in the foot and ankle tissues increased and the gap between the bones increased in the experimental group.Immunohistochemical findings showed that the expression levels of Smad5 and SP7 decreased in the experimental group,while the mRNA expression of Sox9 increased.RT-qPCR results showed that the mRNA expression of Smad5 and SP7 decreased,while the mRNA expression of Sox9 increased in the foot and ankle tissues of rats in the experimental group.Western blot results showed that P-Smad5/Smad5 expression and SP7 expression were decreased and Sox9 expression was increased in the ankle of rats in the experimental group.To conclude,the occurrence of cartilage abnormalities in the foot and ankle of the rat model of congenital clubfoot is associated with impaired transmission of the BMP/Smad signaling pathway.

We reported a 59-year-old male with exertional angina pectoris, and the coronary angiography showed multiple vessel lesions. The initial strategy was coronary artery bypass grafting (CABG). The measurement of quantitative flow ration (QFR) before operation indicated that the posterior descending branch (PD) did not need to be treated. The left circumflex branch (LCX) was small, and the QFR of the left anterior descending branch (LAD) and the first diagonal branch (D1) was<0.8. Therefore, the LAD and D1 were re-vascularized. The operation strategy was changed to on-pump CABG through a small incision, and the final strategy was LIMA-D1-LAD (sequential), fractional flow reserve (FFR) of distal LAD and D1 after CABG were>0.8 by computed tomography FFR. SYNTAX scores after CABG were 20 and the functional SYNTAX scores after CABG were 3, indicating a good prognosis.

Objective:To investigate the mid-to-long term therapeutic effects of allogeneic bone composite prosthesis reconstruction in patients with large bone defects after the resection of distal femoral tumors.Methods:From June 2013 to December 2018, a total of 19 patients with malignant tumors of the distal femur who underwent reconstruction with allogeneic bone composite prosthesis in the Department of Bone Tumor, Shanghai General Hospital were retrospectively collected. There were 10 males and 9 females, aged 22.3±11 years (range, 11-42 years). The mean body mass index was 19.3±3.4 kg/m 2 (range, 14-27 kg/m 2). There were 18 cases of osteosarcoma and 1 case of Ewing's sarcoma. According to Ennecking staging, there were 17 cases of stage IIB and 2 cases of stage III. The intraoperative blood loss and operation time were recorded, and the prosthesis and patient survival conditions and postoperative complications were observed. The limb function was evaluated by the Musculoskeletal Tumor Society (MSTS) 93 function score. Results:All patients successfully completed the operation. The operation time was 187.3±39.8 min (range, 110-260 min), the intraoperative blood loss was 284.9±87.0 ml (range, 200-500 ml), and the blood transfusion volume was 327±213 ml (range, 100-800 ml). The remaining length of the proximal femur was 153.7±26.6 mm (range, 93-190 mm), and the length of allogeneic bone was 84.1±24.6 mm (range, 39-134 mm). Among the 19 patients, 9 patients (47%) achieved bony union with an average healing time of 16.7±4.8 months (range, 10-25 months), and 7 patients had delayed healing with an average healing time of 18.4±4.0 months (range, 15-25 months). The remaining 10 cases were nonunion between allogeneic bone and host bone. All patients were followed up for 80.7±20.2 months (range, 56-121 months). During the follow-up, 3 cases died due to pulmonary metastasis of bone tumors, and the time of death was 57 months, 63 months, and 59 months after surgery, respectively. At the last follow-up, the patient survival rate was 84% (16/19), and the MSTS 93 function score of the 16 patients was (24.3±2.4) points (range, 21-28 points), with an excellent rate of 100% (16/16). Seven patients underwent revision surgery, 3 cases were aseptic loosening, 3 cases were prosthesis stem fracture at the junction of the allograft bone and the host bone, and 1 case was periprosthetic infection, among which the patient with periprosthetic infection had poor local soft tissue conditions due to preoperative radiotherapy, and the infection was controlled after two revision surgeries. Five cases were revised with allogeneic bone composite prosthesis, and 2 cases were revised with short-stem giant prosthesis with cortical steel plate or locking nail. After revision, the remaining length of the proximal femur was 143.4±31 mm (range, 91-175 mm), and the length of the allograft bone was 92.6±26.6 mm (range, 61-123 mm). The 7 revised patients were still in follow-up. There were no cases of pulmonary infection, nerve injury, deep vein thrombosis or other complications after surgery.Conclusion:The survival period of patients after the surgery to reconstruct large bone defects following the resection of malignant tumors at the distal end of the femur using allogeneic bone composite prosthesis is satisfactory, and the limb function is good. However, the incidence of prosthesis complications is high, which can be reconstructed through revision.

Objective:To study the application of 3D printing technology in multi-center fenestrated/branched endovascular repair (F/B-EVAR) for endovascular repair of abdominal aortic diseases.Methods:From Feb 2018 to Mar 2023, The clinical and followup data of 316 cases of abdominal aortic lesions undergoing repair with F/B-EVAR at 69 medical centers nationwide using 3D printing technology to guide physician-modified stent graft were retrospectively analyzed.Results:The mean follow-up time of the patients was 23 months (2-60 months), and 24 cases were lost to follow up, the follow-up rate was 92.4% (292/316), the mean postoperative hospitalization time was (8.2±4.9) days. A total of 944 main abdominal branch arteries were reconstructed. Intraoperative reconstruction of 11 branches failed, with a success rate of 98.8% (933/944). Within 30 days after surgery, 8 patients died (2.5%), and 6 patients died during follow-up, a total of 14 patients died (4.4%). There were 11 cases (3.5%) of spinal cord ischemia and no patient suffered from permanent paraplegia. There were 19 patients (6.0%) with postoperative renal function injury. Internal leakage was found in 26 patients, and the rate of internal leakage was 8.2%.Conclusion:3D printing technology can accurately locate the location of branch arteries, simplifing the surgical process, shortening the learning curve , and improving clinical efficacy.

Objective To investigate the age-related changes of biomechanical properties for humerus, femur and tibia in male rats and their application values in age estimation. Methods According to different weeks of age, 90 healthy male SD rats were divided into 2, 4, 6, 8, 17, 26, 52, 78 and 104-week groups with 10 rats in eachgroup. After the rats were executed by excessive anesthesia, humerus, femur, and tibia were separated and the attached soft tissues were removed. The length of the above-mentioned bones and the diameter of the middle section (compression site) were measured with vernier caliper, and the three-point bending test was conducted with electronic universal material testing machine to detect the ultimate load and displacement under ultimate load. Results There were significant differences in the ultimate load of humerus, femur and tibia among male rats in different age groups (P<0. 05). With the increase of week age, the ultimate loads of the humerus, femur and tibia increased first and then decreased, and reached the peak value in 52-week age group, showing a strong positive correlation with week age before 52 weeks ( r = 0. 884,0. 933,0. 929, P<0. 05). There was no significant difference in humerus and tibia. The displacement of femur under ultimate load was weakly positively correlated with week age (R= 0. 406,P<0. 05). The age prediction accuracy for automatic linear modeling of ultimate load for humerus, femur, tibia and three above-mentioned bones in rats before 52-week age was 78. 2% , 86. 8% , 84. 1% and 88. 3% , respectively. There was a strong positive correlation between the length of humerus, femur and tibia and the ultimate load (R= 0. 904, 0. 897, 0. 814, P<0. 05). The diameters of humerus, femur and tibia were strongly positively correlated with the ultimate load (R = 0. 759, 0. 814 and 0. 745, P<0. 05). Conclusions The ultimate loads of humerus, femur and tibia in male rats increased first and then decreased with age, and were positively correlated with age before 52 weeks, which could be used for age inference. The highest accuracy of age estimation was ultimate loads of three bones, followed by femur. The length/ middle diameter of humerus, femur and tibia were strongly positively correlated with the ultimate load.

Objective To investigate the effect of different optimization algorithms on accurate reconstruction of traffic accidents. Methods Non-dominated sorting genetic algorithm-II ( NSGA-II), neighborhood cultivation genetic algorithm (NCGA) and multi-objective particle swarm optimization (MOPSO) were used to optimize the multi-rigid body dynamic reconstruction of a real case. The effects of different optimization algorithms on convergence speed and optimal approximate solution were studied. The optimal initial impact parameters were simulated as boundary conditions of finite element method, and the simulated results were compared with the actual injuries. Results NCGA had a faster convergence speed and a better result in optimization process. The kinematic response of pedestrian vehicle collision reconstructed by the optimal approximate solution was consistent with the surveillance video. The prediction of craniocerebral injury was basically consistent with the cadaver examination. Conclusions The combination of optimization algorithm, rigid multibody and finite element method can complete the accurate reconstruction of traffic accidents and reduce the influence of human factors.

Objective:To explore the construction and application methods of multicenter bone tumor-specific database.Methods:Experts from multiple centers including Shanghai General Hospital, Shanghai Changzheng Hospital, Zhongshan Hospital, Shanghai Sixth People's Hospital, Ruijin Hospital, Fudan University Shanghai Cancer Center and Shanghai Ninth People's Hospital established a standard dataset for bone tumors through research and discussion. Clinical data will be automatically collected and standardized according to standard fields. A database will be built and a users' interface will be developed to ensure secure data storage, while providing services such as exporting raw data, visualizing statistical analysis, establishing clinical queue research projects, et al. Finally, the bone tumor database will be shared by integrating with the Shenkang's Big Data Platform to achieve multi-center data integration.Results:A standard data set for bone tumors containing 603 fields has been established and published. An automated data collection system for bone tumors has been established, including complete data collection, data collation and visualization functions. The data categories include modules such as patients' electronic case information, laboratory information on blood routine, biochemistry and tumor markers, imaging information, surgery information, pathology information and radiotherapy records. Personal information such as patients' names and ID numbers are desensitized and encrypted and can be exported for further research. From 2015 to 2023, the total number of bone tumor cases collected in the database was 10,789. From 2015 to 2019, 112 cases of the osteosarcoma cohort were retrospectively analyzed for admission, with a statistical 5-year survival rate of 68%.Conclusion:A regional bone tumor specialty big data network and data sharing platform has been established, along with data sharing mechanisms and standards including data standards, security standards, and quality evaluation standards. This provides data and efficient new solutions for the construction of China's bone tumor database, as well as a research and development platform for standardized diagnosis and treatment of bone tumors and new technologies.

To report the short-term clinical outcome of three cases of distal tibial osteosarcoma treated with a novel 3D-printed ankle fusion prosthesis for limb preservation. The patients were admitted to the Department of Bone Tumor, Shanghai General Hospital from January 2020 to June 2021, with one male and two female cases, aged 18, 12, and 14 years, respectively, all diagnosed with distal tibial osteosarcoma (Ennecking stage IIb). A new self-designed ankle fusion prosthesis was used to perform osteosarcoma resection and prosthetic reconstruction of the distal tibia. The operation time, blood loss, postoperative American Orthopedic Foot and Ankle Society Score (AOFAS) and ankle range of motion were recorded. All the 3 patients successfully completed the operation and were followed up for 22 months, 18 months and 12 months, respectively. The operation time was 140 min, 110 min and 200 min, and the blood loss was 200 ml, 200 ml and 350 ml, respectively. At the last follow-up, the AOFAS were 86, 90 and 95 points, and the range of motion of ankle flexion and extension were 30°, 15° and 30°. There was no local recurrence or lung metastasis at the last follow-up. The novel 3D-printed ankle fusion prosthesis in the distal tibia is safe and effective for the reconstruction of bone defects after resection of osteosarcoma in the distal tibia, and the early postoperative function is satisfactory.

BACKGROUND: In the diseases process of the central nervous system, pathogenic factors stimulate microglia cells to over-activate and secrete inflammatory factors, which lead to further injury of neurons. Whether the deacetylase inhibitor sodium butyrate can reduce the over-activation and inflammatory effects of microglia cells caused by fluorosis is worthy of further study. OBJECTIVE: To investigate the effects of sodium butyrate on fluorine-induced over-activation of microglia in the brain and the expression of inflammatory factors interleukin-1β, interleukin-6 and tumor necrosis factor-α. METHODS: Microglia cells (BV-2) were routinely cultured in F12/DMEM medium containing 10% fetal bovine serum. CCK-8 method was used to observe the effects of sodium fluoride, sodium butyrate and their combination on the viability of BV-2 cells in logarithmic growth phase. The morphology of BV-2 cells after treatment with sodium fluoride, sodium butyrate and their combination, mRNA and protein expressions of interleukin-1β, interleukin-6 and tumor necrosis factor-α were observed by inverted microscope, RT-qPCR and western blot assay. RESULTS AND CONCLUSION: (1) CCK8 results showed that 25×10-6 sodium fluoride could reduce the viability of BV-2 cells, and 0.25 mmol/L sodium butyrate could increase the viability of BV-2 cells. Sodium butyrate 0.25 mmol/L could reverse the decreased viability of 25×10-6 sodium fluoride on BV-2 cells. (2) RT-qPCR and western blot assay results showed that 0.25 mmol/L sodium butyrate could antagonize the over-expression of interleukin-1β, interleukin-6 and tumor necrosis factor-α induced by 25×10-6 sodium fluoride. (3) It indicates that sodium butyrate, in a certain dose, can reduce the inflammatory response mediated by fluorium-induced microglia cells.