To summarize Prof. ZHANG Zhiyuan's clinical experience in using large doses of Fuzi （Aconiti Lateralis Radix Praeparata）. The effect of Fuzi is based on its acrid and hot propoerties， warming and invigorating yang qi and running without guard. The application of large doses of Fuzi can be categorized into raw and processed， with common dosage ranging from 30 g to 60 g of raw Fuzi， and 15 g to 30 g， 30 g to 60 g of processed Fuzi. The quantity-effect relationship of the large dose of Fuzi is summarized as 15 g to 30 g of processed Fuzi could warm water， warm yang and eliminate timidity， as the treatment of asthma with deficiency cold phlegm， edema of yang deficiency， and panic and timidity of yang deficiency； 30 g to 60 g of processed Fuzi could tonify fire， warm the meridians and collaterals， assist yang to dispel cold and relieve pain， as the treatment of coldness in the limbs， abdominal pain， pain in the joints of the limbs， and loose stools due to deficient yang qi and exuberant internal yin cold； 30 g to 60 g raw Fuzi could restore yang to save from collapse， as the treatment of yang depletion after profuse sweating and vomiting. At the same time， different dosages of Fuzi were flexibly paired with other medicines， i.e.， 15 g to 30 g of processed Fuzi was paired with Mahuang （Ephedrae Herba） and Xixin （Asari Radix et Rhizoma） to assist yang to dispel coldness， 30 g to 60 g of processed Fuzi was paired with Baizhu （Atractylodis macrocephalae rhizoma） or Wuzhuyu （Euodiae Fructus） to warm yang and dispel dampness， and 30 g to 60 g of raw Fuzi was paired with Shanzhuyu （Corni Fructus） to tonify both yin and yang.

BACKGROUND:Due to natural degradation,excellent biocompatibility and good mechanical properties,magnesium alloy has become a very valuable implant material in the biomedical field.However,the rapid degradation rate of magnesium alloy limits its further development and application. OBJECTIVE:To review the principle of the degradation of magnesium and its alloys in a physiological environment.The current research status of alloying elements selection is mainly introduced from the aspects of the safety of elements and their influence on the properties of magnesium and its alloys. METHODS:The articles were searched by using the databases of CNKI,PubMed,Web of Science and Elsevier.The key words were"magnesium(alloy),metal name(such as:bismuth(Bi),aluminum(Al)),corrosion,biocompatibility,metal toxicity,scaffold(stent)/screw"in Chinese and English.The search period was from 2013 to 2023.As a result,70 articles were applied for analysis after reading the contents of the articles. RESULTS AND CONCLUSION:Magnesium alloy has been widely studied in the medical field.Although some products have been applied in clinical practice,the high degradation rate of magnesium alloy in the human environment is still the main limitation of large-scale clinical application.The focus of future development is to control its corrosion rate.Alloying is a kind of method to improve the corrosion resistance of magnesium alloys,and various properties can also be improved by adding different alloy components.However,simple alloying cannot satisfy the pursuit of diversified properties of magnesium alloys.To develop multifunctional magnesium alloy products with excellent performance,it is necessary to combine various optimization methods,such as alloying and surface modification,to make up for the shortcomings of their respective methods in the future.In addition,the alloy structure updating with preparation process improvement is combined to enhance the properties of magnesium alloy.

Objective: To investigate the potential relationship between sensory characteristics and gray matter volumes in children with autism spectrum disorders (ASD), to provide a basis for the diagnosis and treatment of children with ASD. Methods: A total of 40 ASD children who were treated or recovered in Xi an medical institutions and 16 typically developing (TD) children who were from several kindergatens in Xi an were invited for participation. Sensory characteristics were evaluated by the sensory processing and self regulation checklist, 3D structural brain images were obtained with TIWI, and gray matter volumes were analyzed by voxel based morphometry. Sensory characteristics and gray matter volumes were compared between groups and the relationship between sensory characteristics and different gray matter volumes were analyzed. Results: The scores of auditory, visual, tactile, sensory processing ability and sensory under responsivity in the ASD group were lower than those in the TD group ( Z/t =-2.63, -2.57 , -3.11, -2.19, -3.83, P <0.05). Gray matter volumes in nine brain regions increased in the ASD group compared to the TD group, including the left and right posterior inferior lobe, right parahippocamal gyrus, left insula, left media frontal gyrus, left superion occipital gyrus, right superion occipital gyrus, right superion parietal lobe, and right posterion central gyrus ( t =3.53, 3.69 , 3.37, 3.86, 3.61, 3.37, 4.04, 3.38, 3.16, P <0.01). In the ASD group, the scores of visual, vestibular, proprioceptive, sensory processing ability, sensory seeking behavior and sensory over responsivity were negatively correlated with gray matter volumes of left superior occipital gyrus ( r =-0.36, -0.40, -0.39, -0.36, -0.40, -0.36), and the scores of visual, vestibular, and sensory over responsivity were negatively correlated with gray matter volumes of the right superior parietal lobule ( r =-0.36, -0.50, -0.42)( P <0.05). Conclusion The presence of paresthesia in children with ASD is associated with gray matter volumes of the left superior occipital gyrus and right superior parietal lobule.

Background Prolonged awkward postures during occupational activities can lead to excessive musculoskeletal load on the wrist of workers and symptoms such as wrist pain or discomfort. Objective To survey the prevalence of wrist pain among workers in 10 key industries and analyze its correlation with wrist working postures. Methods By using stratified cluster sampling method, workers from 10 key industries, such as footwear manufacturing industry, shipbuilding manufacturing industry, and automobile manufacturing industry, were selected from seven regions in North China, East China, Central China, South China, Southwest China, Northwest China, and Northeast China. The demographic information, wrist working postures, pain in wrist of the workers were collected through a cross-sectional survey. Pearson χ² test was used to compare prevalence by selected factors, trend χ² test for between group comparison, and unconditional logistic regression models for the association of wrist working postures with wrist pain. Results There were 64052 workers enrolled in this survey, and 56286 provided valid questionnaires (the effective rate was 87.8%). According to the survey, the prevalence of wrist pain was 23.3% (13112/56286), and the industries with higher prevalences were footwear manufacturing (27.1%, 1927/7106), automobile manufacturing (24.9%, 5378/21560), and shipbuilding and related equipment manufacturing (24.4%, 850/3488) industries. Finger pinching (OR=2.09, 95%CI: 1.95-2.24), frequent wrist bending (OR=2.03, 95%CI: 1.92-2.15), fixed wrist bending (OR=1.77, 95%CI: 1.69-1.85), wrist on hard edge (OR=1.34, 95%CI: 1.28-1.40), and arms over shoulders (OR=1.11, 95%CI: 1.05-1.17) increased the risk of reporting wrist pain. Conclusion Awkward postures are related to wrist pain among workers in selected 10 key industries. The related factors are wrist on hard edge, frequent wrist bending, finger pinching, fixed wrist bending, and arms over shoulders.

Objective:To analyze the 6-year operation faults of PHILIPS Brilliance big bore CT, identify the common problems, make corresponding maintenance plans, reduce the incidence of failures, and carry out simulation prediction of the occurrence rate of failures in the next few years.Methods:The failure data of Brilliance big bore CT from June 2012 to June 2018 were collected, and the curve estimation function in SPASS 19.0 software and the pareto diagram were used to analyze the relationship between the number of failures, time and failure types, and the prediction was made.Results:A total of 28 faults occurred during the 6-year opeation of Brilliance big bore CT. During the first half year, five times of faults occurred with the highest fault rate and then tended to stabilize. The linear function model was obtained using the curve estimation: y=-0.033 x+ 2.099( y for the number of fault, unit for times, x for the unit of time for half a year), the model of R2=0.003. In the next three years, approximately twice faults occurred within half year. The pareto chart showed that 16 faults occurred during data collection, including 3 faults in the treatment bed and 3 faults in the power supply system, respectively. The accumulative ratio of the above three faults was 71.4%, which were the main fault sources. Conclusion:The fault statistical analysis of Brilliance big bore CT is helpful for department maintenance personnel to better understand CT, develop effective maintenance programs, reduce the occurrence of faults, and predict the incidence of faults in the future.

BACKGROUND: Mesenchymal stem cell (MSC)-based cell transplantation is an effective means of treating chronic liver injury, fibrosis and end-stage liver disease. However, extensive studies have found that only a small number of transplanted cells migrate to the site of injury or lesion, and repair efficacy is very limited. METHODS: Bone marrow-derived MSCs (BM-MSCs) were generated that overexpressed the erythropoietin (EPO) gene using a lentivirus. Cell Counting Kit-8 was used to detect the viability of BM-MSCs after overexpressing EPO. Cell migration and apoptosis were verified using Boyden chamber and flow cytometry, respectively. Finally, the anti-fibrosis efficacy of EPO-MSCs was evaluated in vivo using immunohistochemical analysis. RESULTS: EPO overexpression promoted cell viability and migration of BM-MSCs without inducing apoptosis, and EPO-MSC treatment significantly alleviated liver fibrosis in a carbon tetrachloride (CCl4 ) induced mouse liver fibrosis model. CONCLUSION EPO-MSCs enhance anti-fibrotic efficacy, with higher cell viability and stronger migration ability compared with treatment with BM-MSCs only. These findings support improving the efficiency of MSCs transplantation as a potential therapeutic strategy for liver fibrosis.

BACKGROUND: Mesenchymal stem cell (MSC)-based cell transplantation is an effective means of treating chronic liver injury, fibrosis and end-stage liver disease. However, extensive studies have found that only a small number of transplanted cells migrate to the site of injury or lesion, and repair efficacy is very limited. METHODS: Bone marrow-derived MSCs (BM-MSCs) were generated that overexpressed the erythropoietin (EPO) gene using a lentivirus. Cell Counting Kit-8 was used to detect the viability of BM-MSCs after overexpressing EPO. Cell migration and apoptosis were verified using Boyden chamber and flow cytometry, respectively. Finally, the anti-fibrosis efficacy of EPO-MSCs was evaluated in vivo using immunohistochemical analysis. RESULTS: EPO overexpression promoted cell viability and migration of BM-MSCs without inducing apoptosis, and EPO-MSC treatment significantly alleviated liver fibrosis in a carbon tetrachloride (CCl4 ) induced mouse liver fibrosis model. CONCLUSION EPO-MSCs enhance anti-fibrotic efficacy, with higher cell viability and stronger migration ability compared with treatment with BM-MSCs only. These findings support improving the efficiency of MSCs transplantation as a potential therapeutic strategy for liver fibrosis.

OBJECTIVETo screen for mutations of NTRK1 gene in a Chinese family affected with congenital insensitivity to pain with anhidrosis (CIPA).

METHODSGenomic DNA was extracted from the proband and her family members. All of the 17 exons and intron-exon boundaries of the NTRK1 gene were analyzed by direct Sanger sequencing. For the deletional mutation, the PCR products were subjected to T-A cloning and sequencing to verify the mutation.

RESULTSNTRK1 gene analysis revealed that proband has carried a c.1786C>T (p.Arg596*) nonsense mutation inherited from her mother and a novel deletional mutation c.1928-2028+23del from her father. Her elder brother only carried the deletional mutation.

CONCLUSIONThe diagnosis of CIPA relied on typical clinical symptoms of no pain, anhidrosis and intellectual disability and detection of the biallelic NTRK1 mutations. The novel deletional mutation has enriched the spectrum of NTRK1 mutations.

Child, Preschool ; DNA Mutational Analysis ; Exons ; Female ; Hereditary Sensory and Autonomic Neuropathies ; diagnosis ; genetics ; Humans ; Mutation ; Receptor, trkA ; genetics

[ ABSTRACT ] AIM: To characterize the phenotypic and genetic features of a patient with Lowe syndrome. METHODS:The clinical data and the MRI of a ten-month-old patient were analyzed.At the same time, all exons of the OCRL gene of the patient and his parents were amplified and Sanger-sequenced.RESULTS:Clinical analysis revealed that the patient has abnormal vision, nystagmus, congenital cataract, hypotonia, proteinuria, hematuria and psychomotor retar-dation.MRI showed white matter myelination delay, bilateral frontal and temporal dysplasia, and subarachnoid cavity en-largement.The results of PCR and Sanger sequencing detected a de novo mutation, NM_000276.3: c.1280-1281delTT (p.Cys428Hisfs*2), a deletion causing a frame shift.To our knowledge, this mutation in OCRL gene has not been repor-ted previously.CONCLUSION:The clinical manifestations suggested a phenotype of Lowe syndrome, and molecular ge-netic testing confirmed the diagnosis.The novel de novo mutation enriches the OCRL mutation spectrum.

Objective To discuss the predictable factors for the occurrence of intraoperative aneurysm rupture(IAR) of anterior circulation aneurysm treated by clipping.Methods The clinical data of 96 patients with 115 aneurysms treated by clipping were retrospectively analyzed.The univariate analysis and Logistic regression analysis was performed for the risk factors of IAR such as history of hypertension,pre-operative Hunt-Hess scale,aneurysm location,aneurysm sac,aneurysm dome/neck ratio,aneurysm direction,and operation time.Results Twenty-one patients occurred IAR [18.3 ％ (21/115) of aneurysms,21.9％ (21/96) of patients] during the operation,2 patients died and 94 patients were estimated by Rank scale:0 score was for 66 patients,2 scores was for 10 patients,3 scores was for 6 patients,4 scores was for 4 patients,5 scores was for 6 patients and 6 scores was for 2 patients at 6 months after surgery.Statistic analysis revealed that history of hypertension (P =0.037),pre-operative Hunt-Hess scale (P =0.040),aneurysm direction (P =0.009),aneurysm sac (P =0.010),operation time (P =0.001) and aneurysm dome/neck ratio (P =0.029) were the predictable factors for the occurrence of IAR,while aneurysm location was not included (P =0.198).Conclusion The history of hypertension,pre-operative Hunt-Hess scale,aneurysm direction,aneurysm sac,operation time and aneurysm dome/neck ratio 1.78-2.89 are the predictable factors for the occurrence of IAR and the combination of various factors lead to the occurrence of IAR.