Objective To analyze the proportion and clinicopathological characteristics of HER2-positive breast cancer patients with BRCA1/2 pathogenic variants, and their response to neoadjuvant anti-HER2 targeted therapy. Methods The clinicopathological data of 531 breast cancer patients with germline BRCA1/2 pathogenic variants (201 with BRCA1 variants and 330 with BRCA2 variants) were analyzed. Results Among the 201 BRCA1 and 330 BRCA2 variants, 17 (8.5%) and 42 (12.7%) HER2-positive breast cancer cases were identified, respectively, accounting for 11.1% of all BRCA1/2-mutated breast cancers. Compared with BRCA1/2-mutated HR-positive/HER2-negative patients, HER2-positive patients did not present any significant differences in clinicopathological features; however, compared with triple-negative breast cancer patients, HER2-positive patients had a later onset age and lower tumor grade. Among the 17 patients who received neoadjuvant anti-HER2 targeted therapy, 10 cases achieved pCR (58.8%), whereas 7 cases did not (41.2%). Conclusion HER2-positive breast cancer accounts for more than 10% of BRCA1/2-mutated patients. Approximately 40% of these patients fail to achieve pCR after neoadjuvant targeted therapy. This phenomenon highlights the possibility of combining anti-HER2 targeted agents with poly (adenosine diphosphate-ribose) polymerase inhibitors.

Objective To investigate the potential significance of FOXP3 expression in BRCA1/2-mutant breast cancer.Methods A total of 48 BRCA mutation carriers(16 with BRCA1 and 32 with BRCA2)and 78 age-matched non-carriers were included in this study.Immunohistochemistry was used to detect the expression of FOXP3 in breast cancer tissues.The FOXP3 RNA expression in 39 BRCA1,36 BRCA2,and 948 non-carrier breast cancer patients from TCGA-BRCA and the correlation with homologous recombin-ation deficiency scores were evaluated to validate the immunohistochemistry results.Results The FOXP3 positive rate was 43.8%(7/16)in BRCA1 mutation carriers,59.4%(19/32)in BRCA2 mutation carriers,and 9.0%(7/78)in non-carriers.The FOXP3 positive rates in patients with BRCA1/2 mutant breast cancer were significantly higher than those in non-carriers(P=0.002;P<0.001).TCGA-BRCA results showed that the FOXP3 RNA level in BRCA1/2 mutant breast cancer was significantly higher than that in non-carriers(P=0.02,P=0.004).The FOXP3 RNA level was positively correlated with the homologous recombination deficiency score(Spearman R=0.30,P<2.2e-16).Conclusion Patients with BRCA1/2 mutant breast cancers have higher FOXP3expression than non-carriers,and may be more sensitive to immunotherapy.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Glioma is the most common primary tumor of the brain,accounting for 81%of central nervous system(CNS)malignant tumors.The degree of malignancy is high,and the current treatment methods are limited.In recent years,with the in-depth study of intestinal flora and brain-gut axis,it has been found that the diversity of gut microbiota plays an important role in the regulation of glioma.The mechanism is that the intestinal flora affects the development of glioma through the role of immune regulation and metabolites.In addition,it has been con-firmed that there is a certain correlation between some probiotics and glioma,which provides a new application prospect for the treatment of glioma.This paper discusses the main intestinal bacteria that regulate gliomas as well as the role and regulatory mechanisms of intestinal flora in the development of gliomas,and provides ideas for the discovery of new targets for glioma treatment and further improvement of treatment options.

Objective:To investigate the impact of non-high-density lipoprotein cholesterol (non-HDL-C) level on major adverse cardiovascular and cerebrovascular events (MACCE) and all-cause mortality in the Kailuan Study cohort undergoing revascularization.Methods:This is a prospective cohort study, with participants from the Kailuan Study cohort who participated in physical examinations from 2006 to 2020 and received revascularization therapy for the first time. According to the level of non-HDL-C, the study subjects were divided into 3 groups:<2.6 mmol/L group, 2.6-<3.4 mmol/L group, and≥3.4 mmol/L group. Annual follow-up was performed, and the endpoint events were MACCE and all-cause mortality. Cox proportional regression model was implemented to estimate the impact on MACCE and all-cause mortality associated with the different non-HDL-C groups. The partial distributed risk model was used to analyze the impact of different non-HDL-C levels on MACCE event subtypes, and death was regarded as a competitive event. The restricted cubic spline regression model was used to explore the dose-response relationship between non-HDL-C level and all-cause mortality, MACCE and its subtypes.Results:A total of 2 252 subjects were enrolled in the study, including 2 019 males (89.65%), aged (62.8±8.3) years, the follow-up time was 5.72 (3.18, 8.46) years. There were 384 cases(17.05%) of MACCE and 157 cases(6.97%) of all-cause mortality. Compared with patients with non-HDL-C≥3.4 mmol/L, patients with non-HDL-C<2.6 mmol/L were associated with a 38% reduced risk of MACCE after revascularization [ HR=0.62(95% CI: 0.48-0.80)]. Every 1 mmol/L decrease in non-HDL-C was associated with a 20% reduction in the risk of MACCE [ HR=0.80(95% CI: 0.73-0.88)]. The results of restricted cubic spline also showed that non-HDL-C levels after revascularization therapy were positively correlated with MACCE events (overall association P<0.001, non-linear association P=0.808). For all-cause mortality, compared to the non-HDL-C≥3.4 mmol/L group, the HR for all-cause mortality after revascularization in non-HDL-C<2.6 mmol/L group was 0.67(95% CI: 0.46-1.01). Every 1 mmol/L decrease in non-HDL-C was associated with a 15% reduction in the risk of all-cause mortality [ HR=0.85(95% CI: 0.73-0.99)]. The restricted cubic spline results showed a linear association between non-HDL-C levels after revascularization therapy and the risk of all-cause mortality (overall association P=0.039, non-linear association P=0.174). Conclusion:The decrease in non-HDL-C levels after revascularization were significantly associated with a reduced risk of MACCE and all-cause mortality.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

H 1-antihistamines are widely used in the treatment of various allergic diseases, but there are still many challenges in the safe and rational use of H 1-antihistamines in pediatrics, and there is a lack of guidance on the prescription review of H 1-antihistamines for children.In this paper, suggestions are put forward from the indications, dosage, route of administration, pathophysiological characteristics of children with individual difference and drug interactions, so as to provide reference for clinicians and pharmacists.