Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Malocclusion,identified by the World Health Organization(WHO)as one of three major oral diseases,profoundly impacts the dental-maxillofacial functions,facial esthetics,and long-term development of～260 million children in China.Beyond its physical manifestations,malocclusion also significantly influences the psycho-social well-being of these children.Timely intervention in malocclusion can foster an environment conducive to dental-maxillofacial development and substantially decrease the incidence of malocclusion or reduce the severity and complexity of malocclusion in the permanent dentition,by mitigating the negative impact of abnormal environmental influences on the growth.Early orthodontic treatment encompasses accurate identification and treatment of dental and maxillofacial morphological and functional abnormalities during various stages of dental-maxillofacial development,ranging from fetal stages to the early permanent dentition phase.From an economic and societal standpoint,the urgency for effective early orthodontic treatments for malocclusions in childhood cannot be overstated,underlining its profound practical and social importance.This consensus paper discusses the characteristics and the detrimental effects of malocclusion in children,emphasizing critical need for early treatment.It elaborates on corresponding core principles and fundamental approaches in early orthodontics,proposing comprehensive guidance for preventive and interceptive orthodontic treatment,serving as a reference for clinicians engaged in early orthodontic treatment.

Objective:To investigate the efficacy of metagenomic next generation sequencing (mNGS) in the etiological diagnosis of patients with spinal infection, so as to provide reference for timely diagnosis and treatment.Methods:A total of 40 patients with suspected spinal infection admitted to the Department of Infectious Diseases in Henan Provincial People′s Hospital from January 2020 to July 2022 were included. The results of tissue culture, histopathological examination and tissue mNGS detection were analyzed retrospectively. According to the clinical diagnose, the patients were divided into the spinal infection group (28 cases) and the non-spinal infection group (12 cases). The positive rate, sensitivity and specificity of mNGS and tissue culture in the pathogen detection of patients with spinal infection were compared. McNemar test was used for statistical analysis.Results:There were 23 males and 17 females in 40 patients. The positive rate of mNGS was higher than that of tissue culture (75.0%(30/40) vs 12.5%(5/40)), and the difference was statistically significant ( χ2=0.08, P<0.001). Based on clinical diagnostic criteria, the sensitivity of mNGS in the diagnosis of spinal infection was higher than that of tissue culture (82.1% vs 17.9%), with a statistically significant difference ( χ2=0.02, P<0.001), while the specificity compared to the tissue culture (33.3% vs 100.0%), the difference was not statistically significant ( P>0.05). Conclusions:mNGS has a high pathogen detection rate and sensitivity in the etiological diagnosis of patients with spinal infection, which could provide clinical guidance for the diagnosis and treatment of patients with spinal infection.

Glucagonoma is a rare neuroendocrine tumor of α cells of the pancreas. The tumor excessively secretes glucagon and causes glucagonoma syndrome.70%-90% of patients with glucagonoma will develop necrolytic migratory erythema (NME). We reported a patient of glucagonoma syndrome who was presented to the dermatology outpatient clinic with a 2-year-history of recurrent erythema and scaling on the skin migrating throughout the body. A skin biopsy was performed and resulting features matched with NME, whilst imaging examinations suggested a soft tissue density tumor present in the tail of the pancreas with somatostatin receptor expression and laboratory tests found an elevated levels of serum glucagon. After the diagnosis was confirmed, the patient was treated with surgical resection of the glucagonoma and the skin eruptions resolved rapidly in 4 days. Meanwhile, we reviewed relevant literature published in recent years and summarized its clinical characteristics in order to improve its understanding by clinicians, including clinical manifestations, laboratory and imaging examinations, diagnosis and treatments.

Malocclusion is an oral disease with a high prevalence. The goal of orthodontic treatment is health, aesthetics, function and stability. The transmission straight wire appliance and technique is an innovative orthodontic system with independent intellectual property rights invented by Professor Jiuxiang Lin′s team based on decades of clinical experience, which provides a new solution for the non-surgical correction of skeletal malocclusions, especially class Ⅲ malocclusion, and it is also a good carrier for the implementation of the concept of healthy orthodontics. Due to the lack of guidelines, how to implement standardized application of transmission straight wire technique remains a problem to be solved. This technical specification was formed by combining the guidance from Professor Jiuxiang Lin and joint revision by a number of authoritative experts from the Orthodontic Special Committee, Chinese Stomatological Association, with reference to relevant literatures, and combined with abundant clinical experience of many experts. This specification aims to provide reference to standardize the clinical application of transmission straight wire technique, so as to reduce the risk and complications, and finally to improve the clinical application level of this technique.

Objective:To establish the normal reference value of lumbar bone mineral density (BMD) under quantitative CT (QCT) in Chinese healthy adult females and to explore the regional differences.Methods:Total of 35 431 healthy women who met the inclusion criteria of Chinese health quantitative CT big data program were selected in this study. The BMD of the central plane of L 1 and L 2 vertebrae was measured by Mindways′s QCT system, and the mean value was taken. One-way analysis of variance was used to compare the BMD differences of lumbar vertebrae in women of different ages and regions. The subjects were grouped by an age interval of 10 years, and the level of BMD in different regions of the same age group were compaired. Results:The peak BMD of Chinese healthy adult women appeared in the age group of 20-29 years (Northeast China(183.01±24.58) mg/cm 3, North China (188.93±24.80) mg/cm 3, East China (187.54±27.71) mg/cm 3, South China (186.22±33.72) mg/cm 3, Central China (176.33±24.91) mg/cm 3, Southwest China(182.25±28.00) mg/cm 3), and then it decreased with age. The level of BMD in different regions decreased with the age. Before the age of 70 years, BMD in Central and Southwest China was always at a low level((176.23±24.91) to (90.38±28.12) mg/cm 3, 182.25±28.00 to (88.55±25.68) mg/cm 3), lower than those in Northeast China ((183.01±24.58) to (99.69±27.85) mg/cm 3), North China ((188.93±24.80) to (95.89±26.12) mg/cm 3), East China ((187.54±27.71) to (95.65±27.86) mg/cm 3). After 70 years of age, BMD tended to be the same in different regions ( P>0.05). The BMD values in Central China and Southwest China were similar in the age group of 40-60 years ( P>0.05). The BMD values in the health adult femles in the age group of 60 years in different regions of Chinawere all lower than those of bone mass abnormality (all P<0.05). The detection rate of osteoporosis in females over 50 years was the highest in Southwest China (25.65%) and it was the lowest in North China (17.30%). Conclusions:This study establishes reference values of BMD under QCT in healthy Chinese women, which can be used as a reference basis for identifying women with low BMD who are at risk of osteoporosis. The BMD value is the lowest in Southwest China and the highest in South China.