Objective : To investigate the mechanism of puerarin in the treatment of rheumatoid arthritis(RA) by network pharmacology and animal experiments. Methods : Traditional Chinese Medicine Systems Pharmcolog Database(TCMSP) and SwissTargetPrediction database were used to collect puerarin targets, and the targets of RA were obtained from GeneCards database and OMIM database. The PPI network was established by Cytoscape 3.7.2 software. Gene ontology(GO) function and Kyotoencyclopedia of genes(KEGG) enrichment analysis were performed through the Metascape database. RA rat-collagen-induced arthritis(CIA) model was reproduced using type Ⅱ collagen emulsion, 49 Wistar rats were randomly assigned to seven groups: control group, CIA model group, low-dose, medium-dose and high-dose puerarin group, methotrexate group, Tripterysium Glycosides Tablets group. Except for the control group, the other groups were given continuous gavage for 28 days after the CIA in rats model were prepared. The redness and swelling of the joints and ankle joint pathological changes were observed in each group. Western blot was used to detect the expression of Glycogen synthase kinase3β(GSK-3β), beta-catenin(β-catenin) proteins in the synovium. Real-time quantitative polymerase chain reaction(qPCR) was used to detect the expression of GSK-3β, β-catenin and c-Myc mRNA in the synovium. Results : Puerarin had 134 targets genes, RA had 5 821 target genes, and there were 102 overlapping target genes of puerarin and RA. It involved 184 signaling pathways, including JAK-STAT signaling pathway, NF-κB signaling pathway, Wnt signaling pathway, et al. The results of animal experiments showed that after the intervention of M-puerarin and MTX, the symptoms of redness and swelling of the hind foot were alleviated, the inflammatory cell infiltration in the synovium of the joint was significantly reduced, and the damage of cartilage and bone tissue was reduced. Compared with CIA group, the expressions of GSK-3β, β-catenin protein and GSK-3β, β-catenin and c-Myc mRNA in synovial tissue of rats after M-puerarin intervention decreased(P<0.05). Conclusion Puerarin has the characteristic of multi-components, multi-targets and multi-pathway intervention in RA. Puerarin may alleviate synovial hyperplasia, reduce articular cartilage erosion and bone destruction in CIA in rats by inhibiting Wnt/β-catenin signaling pathway.

ObjectiveTo investigate the effect of icariin （ICA） on steroid-induced ferroptosis in bone microvascular endothelial cells （BMECs）. MethodsRat BMECs were selected and treated with 500 mg·L^-1 hydrocortisone for 1.5 h to establish a ferroptosis model of BMECs. The experimental cells were divided into a blank group， hormone group （500 mg·L^-1 hydrocortisone）， ICA group （500 mg·L^-1 hydrocortisone + 34 mg·L^-1 ICA）， and ferroptosis agonist group （500 mg·L^-1 hydrocortisone + 34 mg·L^-1 ICA + 2.7 mg·L^-1 erastin）. Cell viability was detected by CCK-8. The levels of ferrous ion， glutathione （GSH）， malondialdehyde （MDA）， superoxide dismutase （SOD）， and reactive oxygen species （ROS） were detected by related kit species. The ferroptosis-related proteins， such as glutathione peroxidase 4（GPX4）， ferritin light chain （FTL）， and transferrin receptor protein1 （sTfR） were detected by Western blot， as well as autophagy-related proteins including microtubule-associated protein 1 light chain 3B （LC3B）， Beclin1， B-cell lymphoma-2 （Bcl-2）， and Caspase-3. Results500 mg·L^-1 hydrocortisone intervention for 1.5 h could effectively induce ferroptosis in BMECs， and ferroptosis levels could reach a peak as the intervention continued. In terms of cellular antioxidant capacity， compared with those in the blank group， the cell vitality， GSH in the hormone group decreased significantly， and the levels of ROS， SOD， MDA， and ferrous ions were significantly increased （P<0.01）. Compared with those in the hormone group， the cell viability， GSH were significantly increased， and the levels of ROS， SOD， MDA， and ferrous ions were decreased in the ICA group （P<0.01）. Compared with those in the ICA group， the cell vitality， GSH in the ferroptosis agonist group decreased significantly， and the levels of ROS， SOD， MDA， and ferrous ions increased significantly （P<0.01）. In terms of the relationship between ferroptosis and autophagy， compared with the blank group， the hormone group had significantly increased expression levels of LC3B， sTfR， Beclin1， and FTL and significantly decreased expression levels of GPX4 （P<0.01）. Compared with the hormone group， The ICA group had significantly decreased expression levels of LC3B， sTfR， and FTL and significantly increased expression levels of Beclin 1 and GPX4 （P<0.01）. Compared with those in the ICA group， the expression levels of LC3B， sTfR， and FTL increased in the rapamycin group， and those of Beclin 1 and GPX4 decreased （P<0.01）. In terms of cell ferroptosis and apoptosis，compared with the blank group， the hormone group had significantly increased expression levels of FTL， sTfR and Caspase-3 and significantly decreased expression levels of GPX4， and Bcl-2 （P<0.01）. Compared with the hormone group， the ICA group had significantly decreased expression levels of FTL， sTfR and Caspase-3 and significantly increased expression levels of GPX4， and Bcl-2 （P<0.01）. Compared with those in the ICA group， the expression levels of FTL， sTfR and Caspase-3 in the ferroptosis agonist group were increased， and the expression levels of GPX4， and Bcl-2 were decreased （P<0.01）. In terms of cell function，compared with that in the blank group， the ability of cell migration and tube formation was significantly decreased in the hormone group （P<0.01）. Compared with that in the hormone group， the cell migration and tube formation ability in the ICA group were significantly increased （P<0.01）. ConclusionFerroptosis is involved in steroid-induced damage in BMECs. ICA can inhibit steroid-induced ferroptosis in BMECs， and the mechanism may be associated with the inhibition of ferroptosis by regulating autophagy.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: To explore the bidirectional causal relationship between 731 immune cell phenotypes and recurrent aphthous ulcers (RAU) using Mendelian randomization (MR). Methods: A two-sample bidirectional MR study was conducted using publicly available genome-wide association study (GWAS) summary statistics for 731 immune cell phenotypes and the RAU GWAS summary data from the FinnGen consortium. The inverse-variance weighted (IVW) method was used as the primary analysis tool, with supplementary analyses including the weighted median (WM) method, MR-Egger regression, weighted mode, and simple mode. Sensitivity analyses were conducted using Cochran’s Q test, the mendelian randomization pleiotropy residual sum and outlier (MR-PRESSO) method for detecting pleiotropy and outliers, and leave-one-out cross-validation. Furthermore, differential analysis was performed using a clinical cohort dataset from the Gene Expression Omnibus (GEO) to further validate the MR results. Results: In the forward MR analysis, 731 immune cell phenotypes were considered as exposures and RAU as the outcome. Among them, 52 immune cell phenotypes showed a significant causal effect on RAU (P<0.05). After false discovery rate (FDR) correction, two immune phenotypes remained significantly associated with RAU risk: with increased monocyte-derived myeloid suppressor cells (M-MDSC) (OR = 1.06; 95% CI: 1.03-1.09) and CD33 on granulocytic myeloid-derived suppressor cells (G-MDSC) (OR = 1.06; 95% CI: 1.03-1.09), the risk of RAU also increased. In reverse MR, RAU was found to have a significant causal effect on two immune cell phenotypes (P<0.05), but no significant effects were found after FDR correction. Sensitivity analysis showed no significant heterogeneity between SNPs (P>0.05). Differential analysis of the GEO dataset revealed that the characteristic genes of myeloid-derived suppressor cells (MDSC) (CTBS, IPMK, and UBA3) were significantly upregulated in RAU (P<0.05). Conclusion The MR results of 731 immune cell phenotypes suggest that M-MDSC and CD33 molecules on G-MDSC may be risk factors for RAU development. The clinical GEO dataset further validated that MDSC may play a role in RAU, while RAU did not show a significant causal association with the 731 immune cell phenotypes.

Background Work-related musculoskeletal disorders (WMSDs), as one of the major occupational health issues worldwide, have shown an increasing positive rate year by year. Due to the unique demands of work, operating room nurses exhibit a higher positive rate of WMSDs compared to other occupational groups, necessitating active attention and intervention. Objective To estimate the prevalence of WMSDs among operating room nurses in tertiary hospitals, explore the characteristics and latent categories of WMSDs, and analyze the influencing factors associated with the occurrence of WMSDs. Method Using a randomized cluster sampling method, operating room nurses from nine tertiary hospitals in Urumqi were selected as study participants between December 2023 and January 2024. Data were collected through a general information questionnaire, an ergonomic questionnaire for operating room nurses, and the Chinese Musculoskeletal Disorders Questionnaire. Latent class analysis was employed to examine the patterns of WMSDs among the nurses, while chi-square test and multinomial logistic regression were utilized to analyze the influencing factors of WMSDs. Result A total of 411 valid questionnaires were collected in this survey. The positive rate of WMSDs among operating room nurses in the tertiary hospitals of Urumqi over the past year was 91.9%. The positive rates, ordered from highest to lowest by body region, were neck (79.1%), shoulders (70.3%), and lower back (68.1%). The operating room nurses were categorized into three distinct groups by latent class analysis: multi-site pain group, neck-shoulder-back pain group, and neck and lower back pain group. The results of the multinomial logistic regression models revealed that gender, job strain level, ergonomic load level in the operating room, and exposure to cold or drafty working conditions or not were significant influencing factors for reporting WMSDs among operating room nurses. Specifically, having less than 5 years of work experience, low ergonomic load level, low job strain, and moderate job strain were identified as protective factors against WMSDs. Conversely, exposure to cold or drafty working environments and being female were identified as risk factors for WMSDs. The logistic regression models also indicated that compared to the neck-lower back pain group, the neck-shoulder-back pain group had a higher probability of reporting low job strain (OR=0.168, 95%CI: 0.029, 0.968) and being female (OR=4.847, 95%CI: 2.506, 9.378). In contrast, when comparing to the neck-lower back pain group, the multi-site pain group had a higher probability of reporting, low-level ergonomic workload (OR=0.079, 95%CI: 0.015, 0.412), low job strain (OR=0.019, 95%CI: 0.002, 0.145), moderate job strain (OR=0.080, 95%CI: 0.016, 0.401), high job strain (OR=0.132, 95%CI: 0.027, 0.647), less than 5 years of work experience (OR=0.173, 95%CI: 0.044, 0.683), being female (OR=2.424, 95%CI: 1.130, 5.200), and exposure to cold or drafty working environments (OR=3.277, 95%CI: 1.657, 6.481). Conclusion The positive rate WMSDs among operating room nurses in tertiary hospitals is notably high in Urumqi, with distinct co-occurrence characteristics observed within the population. To mitigate the risk of WMSDs, it is essential to implement targeted health education and prevention training programs tailored to different patterns of WMSDs. Additionally, improving working conditions, optimizing human resource allocation , and other proactive measures should be undertaken. These efforts will effectively reduce the incidence of WMSDs among operating room nurses and safeguard their occupational health.

In January 2025， the European Society for Medical Oncology （ESMO） released the ESMO clinical practice guideline interim update on the management of biliary tract cancer as a supplementary update to Biliary tract cancer： ESMO clinical practice guideline for diagnosis， treatment and follow-up published in November 2022. This interim update mainly revises the latest evidence-based medical recommendations in the key fields of molecular diagnostics and clinical management since the release of the original guidelines， and it is not a comprehensive update of the entire document. This article summarizes and makes an excerpt of the new recommendations from this interim update.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Laparoscopic subtotal cholecystectomy (LSC) has been a safe and viable alternative to conversion to laparotomy in cases of severe cholecystitis. The objective of this study is to determine the utility of intraoperative choledochoscopy in LSC for the exploration of the gallbladder, cyst duct, and subsequent stone clearance of the cystic duct in cases of severe cholecystitis. A total of 72 patients diagnosed with severe cholecystitis received choledochoscopy-assisted laparoscopic subtotal cholecystectomy (CALSC). A choledochoscopy was performed to explore the gallbladder cavity and/or cystic duct, and to extract stones using a range of techniques. The clinical records, including the operative records and outcomes, were subjected to analysis. No LSC was converted to open surgery, and no bile duct or vascular injuries were sustained. All stones within the cystic duct were removed by a combination of techniques, including high-frequency needle knife electrotomy, basket, and electrohydraulic lithotripsy. A follow-up examination revealed the absence of residual bile duct stones, with the exception of one common bile duct stone, which was extracted via endoscopic retrograde cholangiopancreatography. In certain special cases, CALSC may prove to be an efficacious treatment for the management of severe cholecystitis. This technique allows for optimal comprehension of the situation within the gallbladder cavity and cystic duct, facilitating the removal of stones from the cystic duct and reducing the residue of the non-functional gallbladder remnant.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.