BACKGROUND:Osteochondral defect of the joint is a difficult problem faced by orthopedic surgeons,and traditional repair methods are difficult to obtain satisfactory curative effects.Hydroxyapatite-polyvinyl alcohol-based composite hydrogel material is a direction of current research. OBJECTIVE:To prepare hydroxyapatite-polyvinyl alcohol/collagen-chitosan-gelatin composite hydrogel material and characterize its physical characteristics,to verify its histocompatibility and cell adhesion and proliferation ability after implantation in vivo,and explore its repair effect on rabbit osteochondral defects. METHODS:The cylindrical porous poly(lactic acid)scaffold was prepared by 3D printing technology(the pore sizes were 1.2,1.4,1.6 and 1.8 mm,respectively).The poly(lactic acid)scaffold was injected with polyvinyl alcohol and hydroxyapatite mixed emulsion.After freezing thawing and dichloromethane dissolution,hydroxyapatite-polyvinyl alcohol hydrogel was prepared.Then,the collagen-chitosan-gelatin mixture was injected into the hydroxyapatite-polyvinyl alcohol hydrogel and crosslinked with genipin.Finally,the hydroxyapatite-polyvinyl alcohol/collagen-chitosan-gelatin composite hydrogel was prepared by alcohol cleaning and freeze-drying.The physical characteristics of the four groups of hydrogels were characterized,and the hydrogels with the best performance were screened for follow-up experiments.Hydroxyapatite-polyvinyl alcohol hydrogel and collagen-chitosan-gelatin composite hydrogel were implanted subcutaneously in SD rats.Hematoxylin-eosin staining and Masson staining were used to observe the adhesion growth of cells on the material surface.Osteochondral defect(diameter:5 mm,depth:6 mm)models were made in the femoral trochlea of bilateral knee joints of 15 rabbits.The composite hydrogel was implanted on the left side(experimental group),while no material was implanted on the right side(control group).Micro-CT and histology were used to evaluate the repair effect of osteochondral defects. RESULTS AND CONCLUSION:(1)Based on the results of porosity,water content,mechanical testing and scanning electron microscopy,it was concluded that the hydroxyapatite-polyvinyl alcohol/collagen-chitosan-gelatin composite hydrogel with a pore size of 1.2 mm was more consistent with the general characteristics of natural cartilage,which was used for subsequent experiments.(2)Hematoxylin-eosin staining and Masson staining exhibited that with the extension of subcutaneous implantation time of the materials,the adhesion of cells around the two materials increased significantly,and the proliferation of cells after the implantation of collagen-chitosan-gelatin was better,a large number of cells could be seen growing into the formed network structure,and the network structure was gradually degraded.(3)In the rabbit osteochondral defect experiment,8 weeks after surgery,Micro-CT examination demonstrated that the material implanted in the experimental group had good integration with the surrounding bone-cartilage,with some bone growth on the surface and inside,while the cartilage and subcartilage in the control group still had obvious defects,without effective repair.Hematoxylin-eosin staining and toluidine blue staining displayed that the composite hydrogel in the experimental group integrated with the surrounding articular cartilage 4-8 weeks after implantation.With the extension of time,new cartilage gradually formed on the surface of the material.At 12 weeks,most of the defect was covered by new cartilage,and good bone growth was also observed in the subcartilage.In the control group,the deep bone defects were mostly repaired and the superficial cartilage and subchondral bone defects were also repaired to a certain extent,but they were mainly replaced by fibrous tissue and part of fibrocartilage 12 weeks after surgery.(4)In conclusion,hydroxyapatite-polyvinyl alcohol/collagen-chitosan-gelatin composite hydrogel material can mimic the structure and function of natural cartilage,and can effectively repair osteochondral defects in animal experiments.

Objective:To explore the early effects and safety of using a hybrid fixation strategy with 3D-printed porous tantalum metal augments to reconstruct substantial bone defects in complex primary total knee arthroplasty (TKA).Methods:A retrospective analysis was performed on the clinical data from August 2019 to September 2023, encompassing 20 patients (21 knees) with significant bone loss who underwent hybrid fixation with 3D-printed porous tantalum augments. The procedures were conducted at two medical centers: the First Affiliated Hospital, School of Medicine, Zhejiang University (11 cases) and Xiangya Hospital of Central South University (9 cases). The study cohort comprised 6 males (6 knees) and 14 females (15 knees), with a mean age of 61.05±11.23 years (range, 42-80 years). The distribution of cases was 7 on the left side and 14 on the right side. All cases were categorized as type 3 according to the Anderson Orthopaedic Research Institute (AORI) classification system. The cohort included 19 unilateral and 1 bilateral case, with 5 involving complex primary replacements (3 with Charcot arthropathy, 1 with syphilitic arthropathy, and 1 with severe valgus deformity) and 16 revision surgeries (13 for aseptic loosening and 3 for infection). Preoperative assessments included routine CT scans and digital three-dimensional reconstructions to identify large metaphyseal defects exceeding 50% of the metaphyseal area or those thicker than 10 mm. For such defects, 3D-printed standardized porous tantalum augments were implemented. In cases of extensive cavitary bone defects or severe metaphyseal defects where the medial and lateral defects collectively exceeded 80% of the metaphyseal region or where the residual bone stock was insufficient for screw fixation of standardized augments, 3D-printed personalized custom-made porous tantalum augments were employed for hybrid fixation and repair. Comparative analyses were conducted on pre- and postoperative imaging data (prosthesis positioning and complications), knee range of motion (ROM), visual analogue scale (VAS) for pain, and Knee Society score (KSS).Results:Of the cases, 17 were repaired using standardized 3D-printed porous tantalum augments, while 4 underwent repairs with customized augments for hybrid fixation. Follow-up averaged 26.5±15.0 months (range, 12-62 months). There was a significant increase in knee ROM, improving from 72.8°±31.9° preoperatively to 113.2°±6.8° at 12 months postoperatively ( P<0.05). VAS scores decreased from 6.6±1.4 preoperatively to 2.5±1.0 at 12 months postoperatively ( P<0.05). Similarly, KSS improved from 52.8±6.4 preoperatively to 80.7±7.9 at 12 months postoperatively ( P<0.05). There were no incidences of prosthesis displacement, poor bone integration, or postoperative infections. Conclusion:The hybrid fixation strategy employing 3D-printed porous tantalum augments has been found to be effective in addressing significant bone defects in TKA. The follow-up results indicate a satisfactory biological integration of the porous tantalum metal augments with the host bone, which has resulted in substantial improvements in pain relief and knee joint functionality.

Objective To analyze the allocation efficiency of medical and health resources in 26 tertiary hospitals in Suzhou from 2017 to 2022 and perform quantitative analysis in order to provide suggestions for relevant departments to rationally coordinate the health resources allocation,regional health planning and hospital management.Methods The number of health technicians,the number of beds in health institutions and the total health expenditure were selected as input indicators,while the number of diagnostic and treatment visits and the number of discharged patients were selected as output indicators.The efficiency was measured by the SBM(Slack-Based Measure)model and the SBM window model respectively.Results Influenced by public health emergencies,the allocation efficiency of medical resources in tertiary hospitals in Suzhou city decreased first and then started to increase Under the two models,the average efficiency scores of 26 hospitals were 0.687 and 0.707,respectively.Notably,under the SBM window model,19 hospitals(73％)achieved efficiency scores near or above the average.Conclusion The two models present a conclusion that the overall efficiency of the tertiary hospitals in Suzhou is generally effective.To further enhance the allo-cation and utilization of medical resources,it is suggested that a comprehensive consideration of health needs guide the planning of medical resource distribution.Leveraging information technology to innovate medical service models,and strengthening internal de-velopment and management practices are essential strategies for promoting high-quality development in tertiary hospitals.

OBJECTIVE: To investigate the accuracy, safety, and short-term effectiveness of a domestic robot-assisted system in total knee arthroplasty (TKA) by a multicenter randomized controlled trial. METHODS: Between December 2021 and February 2023, 138 patients with knee osteoarthritis who received TKA in 5 clinical centers were prospectively collected, and 134 patients met the inclusion criteria were randomly assigned to either a trial group ( n=68) or a control group ( n=66). Seven patients had lost follow-up and missing data, so they were excluded and the remaining 127 patients were included for analysis, including 66 patients in the trial group and 61 patients in the control group. There was no significant difference ( P>0.05) in gender, age, body mass index, side, duration of osteoarthritis, Kellgren-Lawrence grading, preoperative Knee Society Score (KSS) and Western Ontario and McMaster University Osteoarthritis Index (WOMAC) score between the two groups. The trial group completed the TKA by domestic robot-assisted osteotomy according to the preoperative CT-based surgical planning. The control group was performed by traditional osteotomy plate combined with soft tissue release. Total operation time, osteotomy time of femoral/tibial side, intraoperative blood loss, and postoperative complications were recorded and compared between the two groups. The radiographs were taken at 5 and 90 days after operation, and hip-knee-ankle angle (HKA), lateral distal angle of femur (LDFA), and posterior tibial slope (PTS) were measured. The difference between the measured values of the above indexes at two time points after operation and the preoperative planning target values was calculated, and the absolute value (absolute error) was taken for comparison between the two groups. The postoperative recovery of lower limb alignment was judged and the accuracy was calculated. KSS score and WOMAC score were used to evaluate the knee joint function of patients before operation and at 90 days after operation. The improvement rates of KSS score and WOMAC score were calculated. The function, stability, and convenience of the robot-assisted system were evaluated by the surgeons. RESULTS: The total operation time and femoral osteotomy time of the trial group were significantly longer than those of the control group ( P<0.05). There was no significant difference in the tibial osteotomy time and the amount of intraoperative blood loss between the two groups ( P>0.05). The incisions of both groups healed by first intention after operation, and there was no infection around the prosthesis. Nine patients in the trial group and 8 in the control group developed lower extremity vascular thrombosis, all of which were calf intermuscular venous thrombosis, and there was no significant difference in the incidence of complications ( P>0.05). All patients were followed up 90 days. There was no significant difference in KSS score and WOMAC score between the two groups at 90 days after operation ( P>0.05). There was significant difference in the improvement rate of KSS score between the two groups ( P<0.05), while there was no significant difference in the improvement rate of WOMAC score between the two groups ( P>0.05). Radiological results showed that the absolute errors of HKA and LDFA in the trial group were significantly smaller than those in the control group at 5 and 90 days after operation ( P<0.05), and the recovery accuracy of lower limb alignment was significantly higher than that in control group ( P<0.05). The absolute error of PTS in the trial group was significantly smaller than that in the control group at 5 days after operation ( P<0.05), but there was no significant difference at 90 days between the two groups ( P>0.05). The functional satisfaction rate of the robot-assisted system was 98.5% (65/66), and the satisfaction rates of stability and convenience were 100% (66/66). CONCLUSION Domestic robot-assisted TKA is a safe and effective surgical treatment for knee osteoarthritis, which can achieve favorable lower limb alignment reconstruction, precise implant of prosthesis, and satisfactory functional recovery.
Humans ; Arthroplasty, Replacement, Knee/methods* ; Osteoarthritis, Knee/surgery* ; Blood Loss, Surgical ; Robotics ; Knee Joint/surgery* ; Knee Prosthesis ; Retrospective Studies

Objective:To report the application of our self-made Kirschner wire connecting rod combined with a conventional intramedullary nail extractor in difficult extraction of intramedullary devices.Methods:From January 2012 to August 2017, 10 patients with a hard-to-remove intramedullary device were treated at Department of Orthopaedics, The Fifth Hospital Affiliated to Xinjiang Medical University. They were 7 males and 3 females with a mean age of (40.0±9.0) years. In cases where no relevant extractor was available for the intramedullary device or it was impossible to connect the extractor connecting rod to the tail of the intramedullary device, the Kirschner wire was bent and pulled through the screw hole or the hole newly drilled at the tail of the intramedullary device to be tied or fixed with a conventional extractor connecting rod to form an effective connection. Next, our self-made Kirschner wire connecting rod was used to pull out the intramedullary device. In this cohort, 7 intramedullary nails in the tibia, 1 femoral intramedullary nail, 1 humeral intramedullary nail, and 1 tibial elastic nail were removed. The difficult extraction was due to "cold welding" of the tail cap of the intramedullary nail in 3 cases, mismatch between the screw rod of the extractor and the tail screw hole of the intramedullary nail in 4 cases, and unavailability of relevant removal tools in 3 cases. The time for intramedullary device removal, blood loss and postoperative adverse reactions were recorded.Results:Of this cohort, 9 patients underwent simple removal of the intramedullary device and 1 patient replacement of the intramedullary device. The total time for removal of an intramedullary device was (2.3±0.8) h, ranging from 1.0 to 3.2 h. The amount of blood loss was (159.0±61.0) mL, ranging from 80 to 250 mL. The follow-up was (14.5±2.2) months, ranging from 11 to 18 months. There was no infection or fracture associated with implant removal.Conclusion:Application of our self-made Kirschner wire connecting rod in combination with a conventional intramedullary nail extractor is an easy operation to successfully extract hard-to-remove intramedullary implants, requiring no more special instruments.

Objective To meet the needs of public health emergency management in the new era, to improve the problems exposed in the public health emergency system after the outbreak of COVID-19, and to provide the government with a list of the gaps in the construction of the public health emergency system. Methods Several methods, including literature review, observation (discussion and questionnaire survey), and comparative and descriptive research, were used to conduct comprehensive analysis through the combination of induction and deduction. The evaluation questions were graded and were translated into some recognition indexes (averages). The golden section method was used for the recognition standard of evaluation problems, and U test method was used for statistical test. Results Five aspects of problem evaluation and suggestions were determined, including early warning, emergency plan, emergency management department, linkage between systems and epidemic situation judgment. The recognition indexes were 0.916, 0.905, 0.571, 1.000 and 1.190, respectively, all of which met the recognition standard, and there was no significant difference between them(P=0.357). The corresponding measures and suggestions were as follows: early warning trigger mechanism, modular emergency plan, government public health emergency agencies, collaborative emergency drill system of various industries, and expert epidemic situation judgment mechanism. Conclusion It is determined that the proposed measures to complement the weaknesses of public health emergency system in Suzhou are suitable for the locality and objectivity after the three steps of literature review, management staff discussion and professional questionnaire survey. The present study provides an objective basis for the health administrative department to propose the public health emergency system construction project to the government.

Objective:To prospectively analyze the early clinical effects of 3D-printed porous metal cup with hip dual-mobility revision (HDR) system in treating severe acetabular bone defects.Methods:A total of 17 patients with severe acetabular defects (15 patients in Allan-Gross type 4 and 2 patients in type 5; 2 patients in Paprosky type 2B, 4 patients in type 3A and 11 patients in type 3B) who underwent revision hip arthroplasty between July 2019 and May 2020 were analyzed. There were 7 males and 10 females (mean age 67.3±9.3 years; range 42-80 years). The average body mass index was 22.2±3.8 kg/m 2 (range 17.7-33.3 kg/m 2). The preoperative mean leg length discrepancy (LLD) was 42.9±31.1 mm (range 10-160 mm) . One patient presented positive Trendelenburg sign. The follow-up duration was 12.1±3.0 months (range 6-16 months). The clinical and radiographic hip scores in all patients were evaluated. Results:The mean Harris Hip Score (HHS) was 31.2±11.3 points at preoperatively, 63.5±10.0, 68.7±10.4 and 70.2±10.1 points at 3 days, 7 days and 1 month postoperatively. At the latest follow-up, HHS was increased to 81.6±7.0 points. The outer cup mean abduction angle was 48.1°±10.6° and the mean inclination angle was 10.8°±6.0° postoperatively. The inner cup mean abduction angle was 45.0°±6.2° and the mean inclination angle was 10.8°±3.7°. The mean LLD decreased to 11.1±3.8 mm (range: 0-15 mm) after surgery. At the latest follow-up, all acetabular components were radiologically stable without displacement. No osteolysis or absorption was observed. There was no infection, loosening or nerve injury in all cases.Conclusion:During short-term follow-up, the 3D-printed porous metal HDR system can effectively enhance the stability of implants with satisfied quality of life. It can provide a good result for the revision of total hip arthroplasty with severe acetabular defects.

Objective: To investigate the sex- and age-specific association between resting heart rate and hypertension in rural adult residents of Henan province. Methods: At baseline, a total of 20 194 participants were randomly selected from Xin′an County of Henan province between July 2007 and August 2008. After excluding participants with hypertension or without resting heart rate data at baseline, and participants died or without hypertension outcome or diagnosed as gestational hypertension during follow-up between July 2013 and October 2014, 10 212 participants were finally included in this study. Multiple linear regression model was used to examine the association between resting heart rate and change of blood pressure. Logistic regression model was used to estimate the association between resting heart rate and risk of hypertension. Results: There were 2 059 new hypertensive cases (839 male) during the 6 years follow-up. After controlling for potential confounders, per 5 beats/minutes increases in resting heart rate was associated with 0.18 mmHg (1 mmHg=0.133 kPa) (95%CI 0.01-0.36 mmHg, P=0.046) absolute increase in systolic blood pressure and 7% higher risk of developing hypertension in women (95%CI 1.03-1.11, P<0.05). Compared with resting heart rate<70 beats/minutes, the adjusted RRs for 76-82 and>82 beats/minutes groups were 1.39 (95%CI 1.18-1.63, P<0.05) and 1.22 (95%CI 1.02-1.45, P<0.05), respectively. For both age groups, increased resting heart rate was positively associated with risk of hypertension in women(RR=1.05(95% CI 1.01-1.10), P<0.05 (the women those <60 years); RR=1.14(95% CI 1.04-1.25), P<0.05 (the women those≥60 years). However, no significant association was found between resting heart rate and hypertension in male residents. Conclusions Increased resting heart rate is associated with high risk of hypertension in women who live in rural area, especially in elder women of this cohort.

From 1987 to 2017, cardiovascular disease (CVD) had been ranking the first cause of death in Suzhou, and the mortality rate showed an upward trend annual percentage changes (APC=0.62%, P=0.001), while the standardized mortality rate showed a downward trend (APC=-2.65%, P<0.001). The probability of premature death of CVD declined consistently from 7.06% in 1987 to 2.00% in 2017 (APC=-4.45%, P<0.001). When the life expectancy was set at 70, the potential years of life lost rate (PYLLR) decreased from 6.35‰ in 1987 to 3.30‰ in 2017, and the standardized PYLLR decreased from 7.30‰ to 2.68‰. When the life expectancy was set at 75, the PYLLR decreased from 10.12‰ to 5.19‰, and the standardized PYLLR decreased from 11.44‰ to 3.88‰. With the increase of years, all PYLLR and standardized PYLLR showed a significantly downward trend (APC=-2.51%--3.89%, P<0.001).

Objective: To investigate the sex- and age-specific association between resting heart rate and hypertension in rural adult residents of Henan province. Methods: At baseline, a total of 20 194 participants were randomly selected from Xin'an County of Henan province between July 2007 and August 2008. After excluding participants with hypertension or without resting heart rate data at baseline, and participants died or without hypertension outcome or diagnosed as gestational hypertension during follow-up between July 2013 and October 2014, 10 212 participants were finally included in this study. Multiple linear regression model was used to examine the association between resting heart rate and change of blood pressure. Logistic regression model was used to estimate the association between resting heart rate and risk of hypertension. Results: There were 2 059 new hypertensive cases (839 male) during the 6 years follow-up. After controlling for potential confounders, per 5 beats/minutes increases in resting heart rate was associated with 0.18 mmHg (1 mmHg=0.133 kPa) (95%CI 0.01-0.36 mmHg, P=0.046) absolute increase in systolic blood pressure and 7% higher risk of developing hypertension in women (95%CI 1.03-1.11, P<0.05). Compared with resting heart rate<70 beats/minutes, the adjusted RRs for 76-82 and>82 beats/minutes groups were 1.39 (95%CI 1.18-1.63, P<0.05) and 1.22 (95%CI 1.02-1.45, P<0.05), respectively. For both age groups, increased resting heart rate was positively associated with risk of hypertension in women(RR=1.05(95% CI 1.01-1.10), P<0.05 (the women those <60 years); RR=1.14(95% CI 1.04-1.25), P<0.05 (the women those≥60 years). However, no significant association was found between resting heart rate and hypertension in male residents. Conclusions: Increased resting heart rate is associated with high risk of hypertension in women who live in rural area, especially in elder women of this cohort.
Adult ; Blood Pressure ; Cohort Studies ; Female ; Heart Rate ; Humans ; Hypertension ; Male ; Risk Factors ; Rural Population