Objective: To investigate the association between monocyte to high-density lipoprotein cholesterol ratio (MHR) and periodontitis and to provide new epidemiologic evidence on the factors affecting periodontitis. Methods: Data on MHR, periodontitis, and other covariates were selected from the NHANES(National Health and Nutrition Examination) database for 3 cycles of subjects in 2009-2010, 2011-2012, and 2013-2014, and a total of 8 456 study subjects were included. The study participants were grouped according to the prevalence of periodontitis (presence or absence), and three regression models (unadjusted covariates, partially adjusted covariates, and fully adjusted covariates) were constructed to analyze the relationship between MHR and periodontitis by using a weighted logistic regression method with stepwise adjustment for confounders. MHR was divided into four groups from Q1 to Q4 according to quartiles from small to large for weighted trend analysis, and the nonlinear relationship between MHR (continuous) and periodontitis was analyzed using a restricted cubic spline with subgroup analysis and sensitivity analysis. Results: All three logistic regression models showed a positive association between MHR and periodontitis (OR = 2.92, 95%CI: 2.14-3.99, P<0.001 (not adjusted); OR = 1.97, 95%CI: 1.39-2.78, P<0.001 (partially adjusted); OR = 1.62, 95%CI: 1.10-2.39, P = 0.017 (fully adjusted)). Trend analysis showed a significantly higher risk of developing periodontitis in the Q4 group compared with the Q1 group in both single (OR = 1.92, 95% CI: 1.58-2.33, P<0.001) and multifactorial analyses (OR = 1.30, 95% CI: 1.03-1.64, P = 0.029). Restricted cubic spline results did not support a nonlinear relationship between MHR and periodontitis (P for nonlinear>0.05), subgroup analysis showed no significant interaction between the covariates and MHR (P>0.05), and sensitivity analysis also showed a positive correlation between MHR and periodontitis (OR = 1.67, 95%CI: 1.31-2.14, P<0.001). Conclusion MHR is positively associated with the risk of developing periodontitis.

Objective: To explore the effect of different miniscrew placement heights on the distribution of biological forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization, to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments. Methods: Mimics, GeomagicStudio 2017, SolidWorks 2016, and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the following six working conditions: working condition 1 was the control group without miniscrews; working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm, 7 mm, 4 mm, and 1 mm from the top of the alveolar crest, respectively; working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane. Results: On the sagittal axis, miniscrew anchorage caused distal displacement of all teeth. Compared to the control group, in the miniscrew group, the displacement of the anterior molars exceeded that of the second molars. On the vertical axis, the result in the control group was similar to backward bending; the results in the miniscrew groups resembled the effect of a lever, lowering the lateral incisors and canines and raising the central incisors and first premolars. On the coronal axis, the second premolars and the first molars showed lingual displacement in the control group, and only the premolars and first molars showed lingual displacementin the miniscrew groups. The canines were the teeth that were most strongly affected by the change in miniscrew placement height. Conclusion The higher the miniscrew position is, the stronger the protective effect on the anterior anchorage. According to the miniscrew placement height, the mandibular arch should be properly narrowed, the central incisors and first premolars should be lowered, and the lateral incisors and canines should be raised when designing clinical treatments.

Objective To design an enhanced postoperative recovery checklist for the patients who had surgery for laryngeal cancer,hence to instruct the patient with a standard procedure in rehabilitation.Methods A total of 72 patients who had surgery for laryngeal cancer in our department from April 2020 and April 2021 were enrolled as study subjects for a controlled study before and after surgery of different patients.A total of 37 patients who had surgery between April and September 2020 were assigned in the control group,while another 37 patients who had the surgery between October 2020 and April 2021 were assigned in the trial group.Patients in the control group were managed with a routine enhanced perioperative recovery plan,and those in the trial group were managed with the checklist,which was drafted by modification and improvement of the routine enhanced perioperative recovery plan through literature reviews and expert consultations.The two groups were compared in terms of the standardised rate of enhanced recovery compliance,medical staff satisfaction,average hospital-stay and patient satisfaction.Results The trial group showed significant improvement in comparison with the control group in terms of the standardised rate of enhanced recovery compliance(93.28%versus 84.08%),score of satisfaction level[(95.57±2.25)versus(92.60±2.49)],score of doctor satisfaction[(35.75±0.89)versus(32.88±1.50)],and the score of nurse satisfaction[(35.45±1.10)versus(33.00±1.30)](all P<0.05).The average hospital-stay in the trial group was significantly shorter than that in the control group[(9.89±3.32)days versus(12.60±4.33)days](P<0.05).Conclusion The designed checklist can improve the standardised rate of enhanced recovery compliance,the satisfaction of both medical staff and patients and facilitate the recovery of patient.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To investigate the effect of resveratrol(RSV)in the treatment of peri-implantitis in a murine model and its effect on nuclear factor kappa-B(NF-κB)signaling and mitogen-activated protein kinase(MAPKs)signal-ing.Methods This study has been reviewed and approved by the Ethics.After extracting the right maxillary molars of 40 C57BL/6 mice and allowing them to heal naturally for 8 weeks,implants were implanted at the site of the first molar.The mice were randomly divided into a control group,a mouse peri implantitis model group,a low-dose group of 20 mg/kg resveratrol(RSV-L),and a high-dose group of 40 mg/kg resveratrol(RSV-H).After 4 weeks of implant implantation,a silk thread ligation induced peri implantitis model was established in all mice except for the control group.The model group received intervention with physiological saline by gavage,while the drug group received intervention with resvera-trol by gavage for 6 consecutive weeks.After 6-week treatment,observe the swelling of the gums around the implant and measure the bone resorption around the mouse implant using micro CT.Enzyme linked immunosorbent assay(ELISA)was used to detect the levels of tumor necrosis factor alpha(TNF-α)and interleukin-6(IL-6)in gingival crevicular fluid.HE staining was used to observe the infiltration of inflammatory cells in the surrounding tissues of mouse implants.Pro-tein expression level and phosphorylation level of extracellular regulated protein kinases(ERK),p-ERK,c-Jun N-termi-nal kinase(JNK),p-JNK,p38 mitogen activated protein kinase(p38 MAPK),p-p38MAPK,nuclear factor kappa-B(NF-κB),p-NF-κB,nuclear factor-κB inhibitory protein(IκBα),p-IκBα in MAPKs/NF-κB signaling pathway were detected by Western blot(WB).Results Resveratrol group showed reduced tissue edema and decreased alveolar bone resorp-tion.Among them,the high-dose resveratrol group had lighter tissue edema and weaker bone resorption compared to the low-dose group.The micro CT results showed that significant changes in the bone level around the implant were observed in the model group mice at four sites:proximal,distal,buccal,and palatal.High dose resveratrol intervention reduced al-veolar bone resorption(P＜0.05);compared with the low-dose group,the high-dose group showed a decrease in palatal bone resorption(P＜0.05),while there was no significant difference in absorption between the mesial,distal,and buccal sides(P＞0.05).The ELISA results showed that compared with the model group,the levels of TNF-α and IL-6 in the gingival crevicular fluid of mice in the low-dose and high-dose resveratrol groups were lower(P＜0.05).The IL-6 in the gingival crevicular fluid of mice in the high-dose resveratrol group was lower than that in the low-dose group(P＜0.05).However,there was no significant difference in TNF-α levels between the two groups.HE staining showed a decrease in inflammatory cell infiltration in mice after treatment with resveratrol.The WB results showed that compared with the con-trol group,the expression levels of p-Erk,p-JNK,p-p38MAPK,p-IκA,and p-NF-κB phosphorylated proteins in the gingi-val tissue of the model group mice were significantly increased(P＜0.01).The resveratrol treatment group significantly inhibited the phosphorylation of p-Erk,p-JNK,p-p38MAPK,p-IκA,and p-NF-κB proteins.Compared with the low-dose group,the high-dose group inhibited the phosphorylation of MAPKs/NF-κB signaling pathway related proteins more sig-nificantly(P＜0.05).Conclusion Resveratrol protect ligature induced peri-implantitis murine model,which may be re-lated to its inhibition of phosphorylation of MAPKs/NF-κB pathway.