Background As a pillar industry in China, the manufacturing sector has a high incidence of non-fatal occupational injuries. The factors influencing non-fatal occupational injuries in this industry are closely related at various levels, including individual, equipment, environment, and management, making the analysis of these influencing factors complex. Objective To identify influencing factors of non-fatal occupational injuries among manufacturing workers, providing a basis for targeted interventions and surveillance. Methods A total of 2243 frontline workers from cable and shipbuilding enterprises were selected as study subjects to investigate the incidence of non-fatal occupational injuries and collect information at four levels: individual, equipment, management, and environment in past 12 months. Data balancing was performed using resampling, and LASSO regression was used to select factors of non-fatal occupational injuries. The influence degree and type of variables were judged based on the magnitude of the estimated coefficients of each variable, where variables with estimated coefficients > 0 are risk factors, and those <0 are protective factors. The area under the receiver operating characteristic (ROC)curve (AUC) was used to test the performance of the model, with an AUC value > 0.7 indicating good model performance. Results Among the 2243 frontline workers, males accounted for 77.7% (1742 out of 2243), with the main age range being 40-49 years old, representing 29.5% (661 out of 2243), 82.7% of the workers (1854 out of 2243) were married, and 55.6% (1248 out of 2243) had a junior middle school education level. The average monthly income for 51.0% (1144 out of 2243) of the workers was between 5000 and 6999 Chinese Yuan. The incidence of non-fatal occupational injuries among the manufacturing workers was 8.4% (189/2243) in the past 12 months. Among the 22 factors associated with the occurrence of non-fatal occupational injuries (P<0.05), 10 were individual-level factors, including gender, smoking, alcohol consumption, colleague relationships, average exercise duration, job burnout, work fatigue, musculoskeletal disorders, cardiovascular diseases, and neurological and sensory organ diseases; 3 were equipment-level factors, including equipment operability, hazardous workpieces, and safety hazards; 5 were environmental-level factors, including low temperatures, special operations, noise, workspace size, and dirty and disorderly environment; and 4 were management-level factors, including daily working hours, weekly working days, overtime, and pre-job technical training. The AUC value of the LASSO regression model was 0.704 and the final model retained a total of 10 variables. Among them, there were 7 risk factors for non-fatal occupational injuries (coefficient > 0), including safety hazards, musculoskeletal disorders, dangerous workpieces, job burnout, dirty and disorderly environment, smoking, and male gender; and 3 protective factors (coefficient < 0), including pre-job technical training, good colleague relationship, and long working days per week. Conclusion Manufacturing enterprises need to focus on the incidence of non-fatal occupational injuries and conduct targeted interventions for non-fatal occupational injuries by controlling potential safety hazards, providing pre-job technical training, reducing dangerous workpieces, rectifying working environment, and reasonably arranging working hours.

Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.

Objective: To investigate the prevalence of hypertension, diabetes and hyperlipidemia among HIV/AIDS patients aged 50 years and above receiving antiretroviral therapy (ART) in Wuxi City, Jiangsu Province, so as to provide insights into the prevention and intervention of chronic diseases for these populations. Methods: The HIV/AIDS patients aged 50 years and above receiving ART were recruited at designated HIV/AIDS medical institutions in Wuxi City using the convenient sampling method from March to June 2024. Demographic information, treatment status and self-reported prevalence of hypertension, diabetes and hyperlipidemia were collected through questionnaire surveys. Factors affecting the prevalence of chronic diseases were analyzed using a multivariable logistic regression model. Results: A total of 830 HIV/AIDS patients receiving ART were surveyed, including 656 males (79.04%) and 375 patients aged 50 to <60 years (45.18%). Among them, 366 patients reported having at least one type of chronic disease, including hypertension, diabetes and hyperlipidemia, with a self-reported prevalence rate of 44.10%. Specifically, 280, 114 and 61 patients reported having hypertension, diabetes and hyperlipidemia, with the self-reported prevalence rates of 33.73%, 13.73% and 7.35%, respectively. Multivariable logistic regression analysis showed that male patients (OR=1.725, 95%CI: 1.187-2.507), those with monthly income less than 3 000 yuan (OR=1.521, 95%CI: 1.122-2.063), those with body mass index of 24 kg/m2 and above (OR=1.577, 95%CI: 1.168-2.130), those who initiated ART at ages of 50 years and above (50 to <60 years, OR=1.535, 95%CI: 1.052-2.238; ≥60 years, OR=3.322, 95%CI: 2.191-5.038), those with ART duration of 10 years and above (OR=2.069, 95%CI: 1.419-3.017), and those who received non-first-line regimens (OR=1.776, 95%CI: 1.304-2.418) had higher risks of developing at least one type of chronic disease, including hypertension, diabetes and hyperlipidemia. Conclusions The self-reported prevalence of at least one type of chronic disease, including hypertension, diabetes and hyperlipidemia among HIV/AIDS patients aged 50 years and above receiving ART in Wuxi City was 44.10%. Gender, monthly income, body mass index and ART status are the main influencing factors for the risk of chronic diseases.

Objective Based on the multi-software visual analysis of the literature on the effect of Janus kinase(JAK)/signal transducer and activator of transcription(STAT)signaling pathway on rheumatoid arthritis in the past decade,the development trend and research hotspot in this field are summarized.To provide researchers with new directions and ideas to promote the innovative development of the field.Methods The literatures related to JAK/STAT signaling pathway in rheumatoid arthritis were collected from the Web of Science Core Collection database from 2013 to 2023.CiteSpace and VOSviewer software were used to analyze the number of publications,countries,authors and keywords of 354 articles retrieved.Results The number of published papers in this field continues to increase.According to the author's research direction,the presentation of high-frequency words,and the attention to the preface and hot topics,it is suggested that this field focuses on gene expression,immune mechanism,inflammatory mechanism,pathway inhibitors,drug therapy,etc.Future research will focus on the safety,mechanism and controlled trials of pathway inhibitors and antirheumatic drugs.Conclusion The effect of JAK/STAT signaling pathway on rheumatoid arthritis has attracted much attention in the past,present and future.There are differences in the research of different teams in this field,and the regional development is unbalanced,suggesting that we should strengthen cooperation and exchanges,focus on the international frontier,and carry out more high-quality research to promote the development and progress of this field,and provide clinical basis.

Rheumatoid arthritis(RA)is an autoimmune disease with the basic pathological manifestation of synovial inflammation.Symmetric poly-articular pain and swelling are the main symptoms in clinical practice,and even extra-articular manifestations and comorbidities such as interstitial fibrosis and coronary artery disease are triggered,which seriously affect the quality of life of patients.Traditional Chinese medicine(TCM)has achieved good clinical efficacy in the prevention and treatment of RA with the advantages of multi-pathway,multi-target,multi-component,and less toxic side effects,and plays an important role in the treatment of RA.Recently,many studies have demonstrated that Chinese medicine monomers and Chinese herbal compound can control inflammation,reduce angiogenesis,induce apoptosis of synovial fibroblasts,and inhibit their proliferation,invasion and migration by regulating the PI3K/Akt signaling pathway,so as to play a key role in the treatment of RA.For this reason,the article summarizes current knowledge regarding the PI3K/Akt signaling pathway and its role in RA,as well as summarizes the current research progress of TCM in the treatment of RA by regulating the PI3K/Akt signaling pathway.The aim of this review is to provide theoretical bases for the prevention and treatment of RA and the development of new drugs.

Objective Through a multi-software visual analysis of the literature on the influence of T cells on rheumatoid arthritis(RA)in recent ten years,the research hotspot and frontier development in this field were summarized.Methods The Chinese and English literature on the influence of T cells on RA from 2012 to 2022 years was retrieved from CNKI and Web of Science database as the research object.CiteSpace and VOSviewer software were used to analyze the number of publications,authors and keywords.Results 519 articles in Chinese and 861 in English were retrieved.The results showed that the number of articles in Chinese increased slowly from 2020 to 2022 years,while the overall trend in English was stable.Keyword analysis shows that it is predicted that future research in this field will focus on the pathogenesis of T cells in RA,the mechanism of bone destruction in RA,disease activity,oxidative stress.Conclusion The influence of T cells on RA has attracted much attention in the past,present and future,and has great research value.However,due to the differences in research priorities at home and abroad,the teams should interact positively and communicate with each other to reveal the internal mechanism of RA and provide theoretical basis for targeted therapy.

Rheumatoid arthritis is a common clinical autoimmune disease characterized by persistent synovitis and pannus formation. In late stage， irreversible destruction and deformation of bone and joint may occur. In this paper， the authors believe that kidney deficiency and essence deficiency is the core mechanism of rheumatoid arthritis bone destruction， and its disease evolution law is summarized as "marrow reduction， flesh flaccid， collaterals blocked". On the basis of modern medical understanding of bone destruction in rheumatoid arthritis， it is considered that the mechanism in Chinese medicine of "marrow reduction， flesh flaccid， collaterals blocked" ultimately leads to bone destruction， is similar to that in the western medicine of abnormal differentiation of osteoclasts， high expression of nuclear factor-κB receptor activator of ligand， and abnormal expression of inflammatory factors. This point of view may provide a more comprehensive and scientific understanding of the key pathogenic mechanism of bone destruction in rheumatoid arthritis.

Patients with severe trauma require an extremely timely treatment and transfusion plays an irreplaceable role in the emergency treatment of such patients. An increasing number of evidence-based medicinal evidences and clinical practices suggest that patients with severe traumatic bleeding benefit from early transfusion of low-titer group O whole blood or hemostatic resuscitation with red blood cells, plasma and platelet of a balanced ratio. However, the current domestic mode of blood supply cannot fully meet the requirements of timely and effective blood transfusion for emergency treatment of patients with severe trauma in clinical practice. In order to solve the key problems in blood supply and blood transfusion strategies for emergency treatment of severe trauma, Branch of Clinical Transfusion Medicine of Chinese Medical Association, Group for Trauma Emergency Care and Multiple Injuries of Trauma Branch of Chinese Medical Association, Young Scholar Group of Disaster Medicine Branch of Chinese Medical Association organized domestic experts of blood transfusion medicine and trauma treatment to jointly formulate Chinese expert consensus on blood support mode and blood transfusion strategies for emergency treatment of severe trauma patients ( version 2024). Based on the evidence-based medical evidence and Delphi method of expert consultation and voting, 10 recommendations were put forward from two aspects of blood support mode and transfusion strategies, aiming to provide a reference for transfusion resuscitation in the emergency treatment of severe trauma and further improve the success rate of treatment of patients with severe trauma.