Patients with chronic cholestatic liver diseases face numerous challenges in the detection， assessment， and management of suspected drug-induced liver injury （DILI）， and in particular， it is difficult to distinguish cholestatic DILI from the progression of underlying cholestatic liver diseases clinically and histologically. Currently， there is a lack of related research and management guidelines for DILI with chronic cholestatic liver diseases. This article discusses the potential risks， causality， and classification criteria for chronic cholestatic liver diseases with DILI， in order to improve the understanding of such diseases among clinicians and provide a reference for prevention， treatment， and management strategies.

BACKGROUND:Cervical disc herniation can cause pain in the neck and shoulder area,as well as radiating pain in the upper limbs.The incidence rate is increasing year by year and tends to affect younger individuals.Fully understanding the biomechanical characteristics of the cervical spine in adolescents is of great significance for preventing and delaying the onset of cervical disc herniation in this age group. OBJECTIVE:To reconstruct cervical spine models for both healthy adolescents and adolescent patients with cervical disc herniation utilizing finite element analysis techniques,to analyze the motion range of the C1-T1 cervical vertebrae as well as the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and the cartilage of the small joints. METHODS:A normal adolescent's cervical spine and an adolescent patient with cervical disc herniation were selected in this study.The continuous scan cervical spine CT raw image data were imported into Mimics 21.0 in DICOM format.The C1-T1 vertebrae were reconstructed separately.Subsequently,the established models were imported into the 3-Matic software for disc reconstruction.The perfected models were then imported into Hypermesh software for meshing of the vertebrae,nucleus pulposus,annulus fibrosus,and ligaments,creating valid geometric models.After assigning material properties,the final models were imported into ABAQUS software to observe the joint motion range of the C1-C7 cervical vertebrae segments under different conditions,and to analyze the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and small joint cartilage of each cervical spine segment. RESULTS AND CONCLUSION:(1)In six different conditions,the joint motion range of the C1 vertebra in the cervical spine models of both normal adolescent and adolescent patient with cervical disc herniation was higher than that of the other vertebrae.Additionally,the joint motion range of each cervical spine segment in normal adolescent was greater than that in adolescent patient with cervical disc herniation.(2)In the cervical spine model of normal adolescent,the maximum stress values in the annulus fibrosus and nucleus pulposus were found on the left side during C2-3 flexion conditions(0.43 MPa and 0.17 MPa,respectively).In the cervical spine model of adolescent patient with cervical disc herniation,the maximum stress values were found on the left side during C7-T1 flexion conditions(0.54 MPa and 0.18 MPa,respectively).(3)In the cervical spine model of normal adolescent,the maximum stress value on the endplate was found on the left side of the upper endplate of C3 during flexion conditions(1.46 MPa).In the model of adolescent patient with cervical disc herniation,the maximum stress value on the endplate was found on the left side of the lower endplate of C7 during flexion conditions(1.32 MPa).(4)In the cervical spine model of normal adolescent,the maximum stress value in the small joint cartilage was found in the C2-3 left rotation conditions(0.98 MPa).In adolescent patient with cervical disc herniation,the stress in the small joint cartilage significantly increased under different conditions,especially in C1-2,with the maximum stress found during left flexion(3.50 MPa).(5)It is concluded that compared to normal adolescent,adolescent patient with cervical disc herniation exhibits altered cervical curvature and a decrease in overall joint motion range in the cervical spine.In adolescent with cervical disc herniation,there is a significant increase in stress on the annulus fibrosus,nucleus pulposus,and endplates in the C7-T1 segment.The stress on the left articular cartilage of the C1-2 is notable.Abnormal cervical curvature may be the primary factor causing these stress changes.

ObjectiveTo evaluate the clinical efficacy of Fuzheng Huaji Formula （扶正化积方） for chronic hepatitis B to reduce the incidence of liver cirrhosis and hepatocellular carcinoma. MethodsA retrospective cohort study was conducted， collecting medical records of 118 patients with chronic hepatitis B and 234 patients with hepatitis B-related cirrhosis who visited the hospital between January 1， 2014， and December 31， 2018. The use of Fuzheng Huaji Formula was designated as the exposure factor. Patients receiving antiviral treatment for hepatitis B without concurrent Fuzheng Huaji Formula therapy were included in the western medicine group， while those receiving antiviral treatment combined with Fuzheng Huaji Formula for a cumulative treatment lasting longer than 3 months were included in the combined treatment group. The follow-up observation period was five years. Kaplan-Meier survival analysis was used to assess the cumulative incidence of cirrhosis in patients with chronic hepatitis B and the cumulative incidence of hepatocellular carcinoma in patients with hepatitis B-related cirrhosis. Univariate and multivariate Cox regression analyses were employed to examine the factors influencing the occurrence of cirrhosis and hepatocellular carcinoma. ResultsAmong patients with chronic hepatitis B， there were 55 cases in the combined treatment group and 63 cases in the western medicine group； among patients with hepatitis B-related cirrhosis， there were 110 cases in the combined treatment group and 124 cases in the western medicine group. Five-year follow-up outcomes for chronic hepatitis B patients showed that the cumulative incidence of cirrhosis was 5.45% （3/55） in the combined treatment group and 17.46% （11/63） in the western medicine group， with a statistically significant difference between groups （Z = 2.003， P = 0.045）. Five-year follow-up outcomes for hepatitis B-related cirrhosis patients showed that the cumulative incidence of hepatocellular carcinoma was 8.18% （9/110） in the combined treatment group and 22.58% （28/124） in the western medicine group， also showing a statistically significant difference （Z = 3.007， P = 0.003）. Univariate and multivariate Cox regression analyses indicated that treatment with Fuzheng Huaji Formula is an independent protective factor in preventing the progression of chronic hepatitis B to cirrhosis and the progression of hepatitis B-related cirrhosis to hepatocellular carcinoma （P＜0.05）. ConclusionCombining Fuzheng Huaji Formula with antiviral therapy for hepatitis B can effectively intervene in the disease progression of chronic hepatitis B， reducing the incidence of cirrhosis and hepatocellular carcinoma.

ObjectiveTo investigate the effects of Tongxinluo capsules on traditional Chinese medicine （TCM） syndrome elements and major adverse cardiovascular events （MACEs） in patients with chronic coronary syndrome of Qi deficiency and blood stasis type. MethodsA multicenter and prospective cohort study was conducted. The intervention of Tongxinluo Capsules was used as the exposure factor， and the patients were divided into an exposure group （integrated traditional Chinese and western medicine treatment group） and a non-exposure group （western medicine treatment group）. The patients were followed up for one year. The TCM syndrome element scores were assessed by using a syndrome element diagnosis scale on the day of enrollment and in the third， sixth， and twelfth months， and the incidence of MACE within one year was recorded. ResultsA total of 186 patients were included， with 128 patients in the exposure group and 58 patients in the non-exposure group. There was no significant difference in baseline data between the two groups. Compared with those in the pretreatment period for each group， the Qi deficiency and blood stasis syndrome scores in the treatment and follow-up period were significantly improved （P<0.05）. Compared with the non-exposure group， the exposure group exhibited significantly decreased Qi deficiency syndrome scores in the treatment and follow-up period （P<0.01） and significantly reduced blood stasis syndrome scores in the sixth month （P<0.05）. In the remaining follow-up period， there was no statistically significant difference between the two groups. Compared with that of the non-exposure group， during the treatment period （the third month）， the difference in Qi deficiency and blood stasis syndrome scores of the exposure group was statistically significant （P<0.05， P<0.01）. At the end of the follow-up period， patients in the non-exposure group had a MACE probability of 6.90% （4/58）， higher than 3.13% in the exposure group （4/58）. Compared with patients with angina pectoris who used conventional medicine， patients administered with Tongxinluo Capsules had a relative risk（RR） of 0.45 ［95%confidence interval（95%CI） 0.12-1.75， P=0.26］. There was no significant difference in the incidence of MACE within one year between the two groups. ConclusionTongxinluo capsules can improve the degree of Qi deficiency in patients with chronic coronary syndrome in the short term， and the improvement effect of blood stasis syndrome appears in the medium and long term. They can better improve the Qi deficiency syndrome in the long term. Within one year， the incidence of MACE in the exposure group was lower than that in the non-exposure group.

ObjectiveTo investigate the effects of Tongxinluo capsules on traditional Chinese medicine （TCM） syndrome elements and major adverse cardiovascular events （MACEs） in patients with chronic coronary syndrome of Qi deficiency and blood stasis type. MethodsA multicenter and prospective cohort study was conducted. The intervention of Tongxinluo Capsules was used as the exposure factor， and the patients were divided into an exposure group （integrated traditional Chinese and western medicine treatment group） and a non-exposure group （western medicine treatment group）. The patients were followed up for one year. The TCM syndrome element scores were assessed by using a syndrome element diagnosis scale on the day of enrollment and in the third， sixth， and twelfth months， and the incidence of MACE within one year was recorded. ResultsA total of 186 patients were included， with 128 patients in the exposure group and 58 patients in the non-exposure group. There was no significant difference in baseline data between the two groups. Compared with those in the pretreatment period for each group， the Qi deficiency and blood stasis syndrome scores in the treatment and follow-up period were significantly improved （P<0.05）. Compared with the non-exposure group， the exposure group exhibited significantly decreased Qi deficiency syndrome scores in the treatment and follow-up period （P<0.01） and significantly reduced blood stasis syndrome scores in the sixth month （P<0.05）. In the remaining follow-up period， there was no statistically significant difference between the two groups. Compared with that of the non-exposure group， during the treatment period （the third month）， the difference in Qi deficiency and blood stasis syndrome scores of the exposure group was statistically significant （P<0.05， P<0.01）. At the end of the follow-up period， patients in the non-exposure group had a MACE probability of 6.90% （4/58）， higher than 3.13% in the exposure group （4/58）. Compared with patients with angina pectoris who used conventional medicine， patients administered with Tongxinluo Capsules had a relative risk（RR） of 0.45 ［95%confidence interval（95%CI） 0.12-1.75， P=0.26］. There was no significant difference in the incidence of MACE within one year between the two groups. ConclusionTongxinluo capsules can improve the degree of Qi deficiency in patients with chronic coronary syndrome in the short term， and the improvement effect of blood stasis syndrome appears in the medium and long term. They can better improve the Qi deficiency syndrome in the long term. Within one year， the incidence of MACE in the exposure group was lower than that in the non-exposure group.

Traditional Chinese Medicine (TCM), as a treasure of the Chinese nation, plays a significant role in maintaining public health. In 2019, the Central Committee of the Communist Party of China and the State Council proposed for the first time the establishment of a TCM registration and evaluation evidence system that integrates TCM theory, "personal experience" and clinical trials (referred to as the "Three-in-One" System) to promote the inheritance and innovation of TCM. Subsequently, the National Medical Products Administration issued several guiding principles to advance the improvement and implementation of this system. Owing to the complexity of its implementation, there are still differing understandings within the TCM industry regarding the positioning of the "Three-in-One" Registration and Evaluation Evidence System, as well as the connotation and value orientation of the "personal experience." To address this, Academician WANG Qi, President of the TCM Association, China International Exchange and Promotion Association for Medical and Healthcare and TCM master, led a group of academicians, TCM masters, TCM pharmacology experts and clinical TCM experts to convene a "Seminar on Promoting the Implementation of the ′Three-in-One′ Registration and Evaluation Evidence System for Chinese Medicinals." Through extensive discussions, an expert consensus was formed, clarifying the different roles of the TCM theory, "personal experience" and clinical trials within the system. It was further emphasized that the "personal experience" is the core of this system, and its data should be derived from clinical practice scenarios. In the future, the improvement of this system will require collaborative efforts across multiple fields to promote the high-quality development of the Chinese medicinal industry.

ObjectiveThis paper aims to analyze the clinical characteristics and medication rationality of liver injury related to Epimedii Folium preparation （EP） and explore the possible risk factors of liver injury， so as to provide a reference for the safe clinical application of Epimedii Folium （EF）. MethodA retrospective analysis was conducted on liver injury cases related to EP from 2012 to 2016. ResultThe number of reported liver injury cases and the proportion of severe cases related to the use of EP show an increasing trend， indicating the objective existence of liver injury caused by EP. There are more cases of liver injury related to EP in women than in men， with an onset age range of 15-91 years old and a median onset age of 60 years old （median onset ages for men and women are 59 and 60 years old， respectively）. The time span from taking EP alone to the occurrence of liver injury is 1-386 days， with a median of 38 days. The time span from taking both EP and Western medicine to the occurrence of liver injury is 1-794 days， with a median of 34 days. EF-related liver injury preparations are mostly composed of traditional Chinese medicines that promote immunity and tonify the liver and kidney， indicating that immune stress in the body may be the mechanism of liver injury caused by the use of EP alone or in combination. There is no increasing trend of toxicity with time or dose in the liver injury caused by EP. By further exploring its risk factors， it is found that patients have unreasonable medication methods such as excessive dosage， repeated use， and multi-drug combination， which may also be one of the important risk factors for EF-related liver injury. ConclusionEP has a certain risk of liver injury and should be emphasized in clinical diagnosis and treatment. Immune stress may be the mechanism of liver injury caused by EP， and in clinical use， it is necessary to be vigilant about the risk of liver injury caused by unreasonable use and combined use with Western medicine.

BACKGROUND:Ankylosing spondylitis is a chronic inflammatory disease with chronic rheumatic immunity.Soft tissue ossification and fusion and spinal stiffness can cause biomechanical changes. OBJECTIVE:To reconstruct the lumbar-sacral intervertebral disc in ankylosing spondylitis patients with lumbar kyphosis by finite element analysis,and to study the range of motion of each segment of T11-S1 and the biomechanical characteristics of annulus fibrosus and nucleus pulposus. METHODS:The imaging data were obtained from an ankylosing spondylitis patient with lumbar kyphosis.The original CT image data of continuously scanned spine were imported into Mimics 21.0 in DICOM format,and T11-S1 was reconstructed respectively.The established model was imported into 3-Matic software in the format of"Stl"to reconstruct the intervertebral disc,and the fibrous intervertebral disc model was obtained.The improved model was further imported into Hypermesh software,and the vertebra,nucleus pulposus,annulus fibrosus and ligament were mesh-divided.After the material properties were given,the model was imported into ABAQUS software to observe the range of motion of each vertebral body in seven different working conditions of T11-S1,and analyze the biomechanical characteristics of each segment of annulus fibrosus and nucleus pulposus. RESULTS AND CONCLUSION:(1)The range of motion of L1 vertebrae was higher than that of other vertebrae under six different working conditions:extension,forward flexion,rotation(left and right),and lateral flexion(left and right).The maximum range of motion was 2.18° during L1 vertebral flexion,and the minimum range of motion was 0.12° during L5 vertebral extension.(2)The annular fiber flexion at L2-L3 segments was greater than the extension(P<0.05),and the annular fiber flexion at L3-L4 and L4-L5 segments was less than the extension(P<0.05).The left rotation of L1-L2 annular fibers was greater than the right rotation(P<0.05).The left flexion of the annulus was greater than the right flexion in L1-L2,L2-L3,L3-L4,L4-L5 and L5-S1 segments(P<0.05).(3)The nucleus pulposus stresses of T11-L12,L1-L2,L2-L3,L3-L4 and L4-L5 segments in forward flexion were greater than in extension(P<0.05).The left rotation of T12-L1 and L3-L4 segments was smaller than the right rotation(P<0.05),and that of T11-T12,L1-L2,and L2-L3 segments was larger than the right rotation(P<0.05).The left flexion was larger than the right flexion in the T11-S1 segment.(4)It is concluded that in ankylosing spondylitis patients with lumbar kyphosis,the minimum range of motion of the vertebral body is located at the L5 vertebral body in extension.To prevent fractures,it is recommended to avoid exercise in the extension position.During the onset of lumbar kyphosis in patients with ankylosing spondylitis,the maximum stress of the annulus fibrosus and nucleus pulposus is located in the L1-L2 segment,which is fixed and will not alter with the change of body position.The late surgical treatment and correction of deformity should focus on releasing the pressure of the annulus fibrosus and nucleus pulposus in this segment to avoid the rupture of the annulus fibrosus and the injury of the nucleus pulposus.

BACKGROUND:Ankylosing spondylitis is a progressive inflammation of spinal stiffness deformity caused by tissue ossification and fibrosis.The posture of ankylosing spondylitis patients is abnormal and their activities are limited that minor injuries can lead to thoracolumbar fractures.Traditional medical image observation limits doctors'preoperative decision planning and postoperative disease prevention for ankylosing spondylitis treatment. OBJECTIVE:Based on the spinal model of ankylosing spondylitis patients before and after posterior spinal cancellous ossification osteotomy("Y"osteotomy for short),to explore the biomechanical changes of"Y"osteotomy and fixation in the treatment of ankylosing spondylitis. METHODS:Based on the preoperative and postoperative CT images of an ankylosing spondylitis patient who went to the Second Affiliated Hospital of Inner Mongolia Medical University,a three-dimensional spine model(T11-S1)before and after"Y"osteotomy(L3 osteotomy)was reconstructed in Mimics 19.0 software.A 7.5 Nm torque was applied to the top of T11 vertebral body to simulate the movement of the spine under six conditions:flexion,extension,left bending,right bending,left rotation and right rotation.Finally,the range of motion of each vertebral body,the stress of each intervertebral disc,and the stress of the screw rod system were simulated. RESULTS AND CONCLUSION:(1)After"Y"type osteotomy and posterior fixation,the range of motion of all vertebrae in the spine decreased,and the loss rate of upper vertebrae was large(L1:77.95%).(2)The maximum stress of the spinal intervertebral disc before operation occurred at the L1-L2 segment(0.55 MPa),and the maximum stress of the spinal intervertebral disc after operation occurred at the T11-T12 segment(0.50 MPa),and the stress of intervertebral disc below T12 was far less than that before operation.(3)The maximum stress of the screw rod system(166.67 MPa)occurred in the upper and middle segments of the rod body and the root of the pedicle screw.(4)In conclusion,the"Y"type posterior fixation operation enhances the stability of the spine and reduces the range of motion of the spine.The vertebral body decompression of the fixed segment is great and the stress-shielding phenomenon of the lower vertebral body is significant.The stiffness of the rod body and the stress concentration area of the pedicle screw should be strengthened to avoid the fracture of the rod caused by stress fatigue.

BACKGROUND:The study of the physical properties of scaffolds has always been a hot topic in the field of tissue engineering research.However,for vascular stimulating scaffolds,in addition to meeting the basic performance of the scaffold,other methods are also needed to promote the regeneration of blood vessels within the scaffold,in order to achieve the ultimate goal of repairing bone tissue. OBJECTIVE:A visualization analysis was carried out on the literature published in and outside China on scaffold stimulation for bone tissue engineering,to explore the research hotspots and research status in this field,and to provide a reference for subsequent studies. METHODS:Using the CNKI database and Web of Science core database as retrieval databases,the relevant literature on vascular scaffolds for bone tissue engineering was retrieved.The literature that did not conform to the research object was removed.The obtained data were imported into CiteSpace 6.1.R2 software.Visualization analysis was performed on authors,national institutions,and keywords in the research field. RESULTS AND CONCLUSION:(1)China,the United States,and Germany were the top three countries with the most articles on scaffold stimulation for bone tissue engineering.(2)The top 3 institutions in the CNKI database were Southern Medical University,Huazhong University of Science and Technology,and Donghua University.In the core database of Web of Science,Shanghai Jiao Tong University,Sichuan University and Chinese Academy of Sciences ranked the top 3 in terms of the number of institutional publications.(3)The top 3 keywords in the CNKI database were"tissue engineering,vascularization,angiogenesis".The top 3 keywords in the Web of Science core database were"mesenchymal stem cell,scaffold,vascularization".(4)Through the analysis of co-citation and highly cited references,the main concerns were as follows:vascularization strategies:scaffold design,angiogenic factor delivery,in vitro co-culture,and in vivo pre-vascularization.Technology:3D printing,electrospinning,vascular transplantation,vascular fusion.Mechanisms:immune regulation and macrophages,drug/growth factor delivery,the relationship between endothelial cells and osteoblasts,the paracrine relationship between bone cells and endothelial cells,signaling molecular pathways,angiogenesis,and anti-angiogenesis molecules.(5)The researches concerning vascular stimulating scaffolds in bone tissue engineering in and outside China attach great importance to the application of stem cells and 3D printing technology.Current research focuses on biological 3D printing technology,scaffold modification methods,and the development and application of intelligent biomaterials based on bone repair mechanisms.