BACKGROUND:For dislocation of acromioclavicular joint induced by coracoclavicular ligament fracture,single EndoButton Plate reconstruction and double EndoButton Plates reconstruction are common repair methods.Further study on the stress distribution and fracture risk of the two repair methods is of great significance. OBJECTIVE:To study the biomechanical properties of the coracoclavicular ligament,and compare the fixation effect,stress distribution and failure mode of single and double EndoButton Plates reconstruction. METHODS:(1)Finite element simulation analysis:Mimics,Wrap and SolidWorks were used to establish normal coracoclavicular ligament,single EndoButton Plate reconstruction and double EndoButton Plates reconstruction.Ansys software was used to analyze the stress and deformation of the scapula and clavicle of each model under vertical load.(2)Sample experiment:Fifteen intact scapular-clavicle specimens were randomly grouped into five groups,with three specimens in each group.In group A,the acromioclavicular ligament was severed and the coracoclavicular ligament remained intact.In group B,acromioclavicular ligaments and trapeoid ligaments were severed,leaving intact conical ligaments.In group C,acromioclavicular ligaments and conical ligaments were cut off,and the intact traprex ligaments were retained.In group D,acromioclavicular and coracoclavicular ligaments were severed,and coracoclavicular ligaments were repaired by single EndoButton Plate reconstruction.In group E,acromioclavicular and coracoclavicular ligaments were severed,and the coracoclavicular ligaments were repaired by double EndoButton Plates reconstruction.The mechanical experiment was carried out by a mechanical testing machine to analyze the biomechanical status,stress distribution and failure patterns of the scapular-clavicle and clavicle. RESULTS AND CONCLUSION:(1)Finite element simulation analysis:The average stress of coracoclavicular ligament attached specimens was the lowest,and the risk of coracoclavicular fracture was less than that of single and double EndoButton Plates reconstruction.The mean stress of the coracoid process was similar in single and double EndoButton Plates reconstruction,and the fracture risk was similar.(2)Sample experiment:In groups A,B,C,D and E,the stiffness of specimens was(26.4±3.5),(19.8±2.8),(21.3±3.2),(57.7±4.1),and(46.2±2.8)N/mm,respectively;the ultimate loads were(545.5±53.7),(360.1±42.1),(250.9±44.4),(643.5±39.1),and(511.9±31.7)N,respectively;global stiffness in groups D and E was higher than that in group A(P=0.000 06,0.000 3);ultimate load in group D was higher than that in group A(P<0.05);the ultimate load was not significantly different between the group E and group A(P>0.05).Ligament fracture was observed in groups A,B and C and coracoid process fracture was found in groups D and E.(3)These results suggest that from the biomechanical analysis,Single EndoButton Plate reconstruction and double EndoButton Plates reconstruction are effective treatment techniques for coracoclavicular ligament fracture in acromioclavicular joint dislocation,but increase the risk of fracture.The double EndoButton Plates reconstruction dispersed the stress of the steel plate and reduced the contact force between the steel plate and bone,but slightly reduced the ultimate bearing capacity.Single and double EndoButton Plates reconstruction should be selected according to the actual clinical situation.

BACKGROUND:The stability of the pelvis is mainly determined by the posterior pelvic ring and the sacroiliac joint.The posterior pelvic ring injury and the dislocation of the sacroiliac joint caused by high energy impacts such as car accidents increase year by year.Surgical treatment is the best method,and there are many kinds of endophytorepair methods in clinical practice,but which treatment method has the best biomechanical properties is still controversial. OBJECTIVE:To compare the biomechanical properties of three kinds of internal implants:anterior double plates,posterior bridging plate and tension nail in the repair of unilateral unstable pelvic posterior ring injury,to provide a reference for the clinical treatment and development of a new pelvic tension screw. METHODS:(1)Finite element simulation:Mimics,Wrap and SolidWorks were used to establish normal pelvic model,unilateral injured pelvis model,and three kinds of internal implant repaired models(anterior double plates,posterior bridging plate and tension nail).Ansys was used to analyze the stress and deformation of the models.(2)Biomechanical test:A total of 15 intact pelvic specimens were randomly grouped into five groups,normal pelvic model,unilateral injured pelvis model,anterior double plates,posterior bridging plate and tension nail groups.The mechanical test was performed using an Instron E10000 testing machine. RESULTS AND CONCLUSION:(1)Simulation:In the normal pelvic model,the average displacement of the sacrum was 0.174 mm,and the maximum stress of the sacral iliac bone was 10.51 MPa,and the stress distribution was uniform.The mean sacral displacement of the unilateral injured pelvis model was 0.267 mm,and the stress concentration of the model was obvious.The mean displacement of the sacrum in the three repaired models was close to that in the normal pelvic model,and the stress distribution of the sacral iliac bone in the tension nail repaired model was uniform.(2)Mechanical test:The stiffness of the normal pelvic model was(226.38±4.18)N/mm,and that of the unilateral unstable pelvic model was the smallest(130.02±2.19)N/mm.The deviation of the normal pelvic model stiffness and the three repaired models'stiffness were all within(±10%),and the repair effect was obvious.(3)The simulation results were in agreement with the experimental results.(4)The biomechanics of the tension nail repaired model was the most similar to that of the normal pelvis,and this method was the best.The repairing stiffness of the anterior double plate was too large,and the stress shielding effect was more significant.The posterior bridging plate repair could not solve the compensatory effect of the normal side soft tissue and had defects.This study provides an optimal basis for clinical surgery.(5)The new type of pelvic tension nail should be improved from the point of view of the tension nail to retain the good biomechanical properties of the tension nail,while adding other advantages,such as being used for the osteoporotic pelvis.

Objective:To explore the early effects and safety of using a hybrid fixation strategy with 3D-printed porous tantalum metal augments to reconstruct substantial bone defects in complex primary total knee arthroplasty (TKA).Methods:A retrospective analysis was performed on the clinical data from August 2019 to September 2023, encompassing 20 patients (21 knees) with significant bone loss who underwent hybrid fixation with 3D-printed porous tantalum augments. The procedures were conducted at two medical centers: the First Affiliated Hospital, School of Medicine, Zhejiang University (11 cases) and Xiangya Hospital of Central South University (9 cases). The study cohort comprised 6 males (6 knees) and 14 females (15 knees), with a mean age of 61.05±11.23 years (range, 42-80 years). The distribution of cases was 7 on the left side and 14 on the right side. All cases were categorized as type 3 according to the Anderson Orthopaedic Research Institute (AORI) classification system. The cohort included 19 unilateral and 1 bilateral case, with 5 involving complex primary replacements (3 with Charcot arthropathy, 1 with syphilitic arthropathy, and 1 with severe valgus deformity) and 16 revision surgeries (13 for aseptic loosening and 3 for infection). Preoperative assessments included routine CT scans and digital three-dimensional reconstructions to identify large metaphyseal defects exceeding 50% of the metaphyseal area or those thicker than 10 mm. For such defects, 3D-printed standardized porous tantalum augments were implemented. In cases of extensive cavitary bone defects or severe metaphyseal defects where the medial and lateral defects collectively exceeded 80% of the metaphyseal region or where the residual bone stock was insufficient for screw fixation of standardized augments, 3D-printed personalized custom-made porous tantalum augments were employed for hybrid fixation and repair. Comparative analyses were conducted on pre- and postoperative imaging data (prosthesis positioning and complications), knee range of motion (ROM), visual analogue scale (VAS) for pain, and Knee Society score (KSS).Results:Of the cases, 17 were repaired using standardized 3D-printed porous tantalum augments, while 4 underwent repairs with customized augments for hybrid fixation. Follow-up averaged 26.5±15.0 months (range, 12-62 months). There was a significant increase in knee ROM, improving from 72.8°±31.9° preoperatively to 113.2°±6.8° at 12 months postoperatively ( P<0.05). VAS scores decreased from 6.6±1.4 preoperatively to 2.5±1.0 at 12 months postoperatively ( P<0.05). Similarly, KSS improved from 52.8±6.4 preoperatively to 80.7±7.9 at 12 months postoperatively ( P<0.05). There were no incidences of prosthesis displacement, poor bone integration, or postoperative infections. Conclusion:The hybrid fixation strategy employing 3D-printed porous tantalum augments has been found to be effective in addressing significant bone defects in TKA. The follow-up results indicate a satisfactory biological integration of the porous tantalum metal augments with the host bone, which has resulted in substantial improvements in pain relief and knee joint functionality.

Objective To investigate the biomechanical properties of a novel sacroiliac lag screw with a spiral blade.Methods Percutaneous sacroiliac lag screws were used as the controls.Polyurethane material was used to simulate the trabecular bone,and the pullout resistance performance was tested on an Instron mechanical testing machine.Subsequently,pelvic specimens were utilized to analyze the static stiffness and dynamic stability of the novel sacroiliac lag screw in repairing sacroiliac joint injuries under normal standing conditions,with normal pelvis,single-sided sacroiliac joint injury pelvis,percutaneous sacroiliac lag screw-single screw repair,and percutaneous sacroiliac lag screw-double screw repair as controls.Results The damage to the polyurethane material after screw extraction was smaller in the novel sacroiliac lag screw group.The average effective holding displacement of the novel sacroiliac lag screw was significantly greater than that of the percutaneous sacroiliac lag screw(P＜0.05).However,the maximum resistance to the pullout force for the percutaneous sacroiliac lag screw was significantly higher than that for the novel sacroiliac lag screw(P＜0.05).The stiffness after repair of sacroiliac joint injuries was significantly higher when using a single sacroiliac lag screw than when using two percutaneous sacroiliac lag screws(P＜0.05).The displacement amplitude was the highest in the sacroiliac joint injury group,followed by that in the normal group.The displacement amplitudes in the other groups were similar;however,the differences were statistically significant(P＜0.05).The dynamic stability of the sacroiliac lag screw repair group was the best,slightly better than that of the percutaneous sacroiliac lag screw-double screw repair group,and the dynamic stability of the sacroiliac joint injury group was the worst.The novel sacroiliac lag screw effectively repaired the sacroiliac joint injuries.Conclusions The novel sacroiliac lag screw can effectively hold the trabecular bone and has practical clinical utility.

AIM:To investigate the role of proviral integration site for Moloney murine leukemia virus 1(PIM1)in the phenotypic switching of vascular smooth muscle cells(VSMCs)induced by oxidized low-density lipoprotein(oxLDL),and to explore the underlying mechanisms.METHODS:Eighteen male ApoE-/-mice(8 weeks old)were ran-domly divided into general diet group and high-fat diet group,with 9 mice per group.After 16 weeks,aortic samples were analyzed using HE staining to observe plaque formation.In vitro,VSMCs were exposed to oxLDL to induce phenotypic transformation.Western blot and immunofluorescence were used to measure the protein expression levels of PIM1 and phe-notypic markers including α-smooth muscle actin(α-SMA),smooth muscle protein 22α(SM22α),osteopontin(OPN),and CD68.Glycolysis levels were assessed by detecting the expression of glycolytic enzymes 6-phosphofructo-2-kinase/fructose-2,6-biphosphatase(PFKFB3)and hexokinase 2(HK2)by Western blot,and lactate secretion was measured using a lactate test kit.The effects of SMI-4a(a specific inhibitor of PIM1)and PIM1 small interfering RNA on oxLDL-in-duced phenotypic markers in VSMCs were evaluated.Moreover,the impact of 3-(3-pyridinyl)-1-(4-pyridinyl)-2-propen-1-one(3PO;a glycolysis inhibitor)on oxLDL-induced phenotypic switching and glycolysis in VSMCs was investigated.RESULTS:HE staining revealed atherosclerotic plaque formation in the aortas of ApoE-/-mice fed with high-fat diet.Im-munofluorescence showed high accumulation of PIM1 and OPN in the tunica intima of atherosclerotic plaques.Compared with control group,aortic plaques exhibited significantly elevated levels of PIM1,OPN and CD68 proteins(P<0.01),ac-companied by reduced expression of contractile phenotype markers α-SMA and SM22α(P<0.01).In vitro,oxLDL treat-ment led to gradual decrease in α-SMA and SM22α expression(P<0.05 or P<0.01),while OPN and CD68 expression in-creased(P<0.05 or P<0.01).Moreover,oxLDL significantly up-regulated the protein expression of PIM1,PFKFB3 and HK2,and increased lactate secretion in VSMCs(P<0.05 or P<0.01).Knockdown of PIM1 or treatment with SMI-4a markedly attenuated these oxLDL-induced effects on VSMCs(P<0.05 or P<0.01).Treatment with 3PO also abolished ox-LDL-induced phenotypic transformation and glycolysis in VSMCs(P<0.05 or P<0.01).CONCLUSION:PIM1 highly accumulates in the atherosclerotic plaques of ApoE-/-mice.The phenotypic transformation of VSMCs was correlated with the expression of PIM1.PIM1 can regulate the phenotypic transformation of oxLDL-treated VSMCs by inducing glycolysis.

【Objective】 To analyze the basic characteristics of whole blood donors from blood stations before and after the outbreak of COVID-19. 【Methods】 After excluding invalid data, data related to the basic characteristics of whole blood donors collected from 26 blood stations in China during 2018 to 2021 were statistically analyzed, including the trend of total whole blood donors, the number of repeated blood donors, the frequency of blood donation, the average age of donors and the recruitment of first-time blood donors. 【Results】 Affected by the epidemic, 8 out of 14 indicators were with large variations, accounting for 57%. The overall growth rate of total whole blood donors during the epidemic was higher than before the epidemic (P<0.05).The number of repeated blood donors has shown an increased trend, with a higher number during the epidemic than before (P<0.05). The frequency of blood donation was lower during the epidemic than before(P<0.05).Average ages of blood donors and female blood donors fluctuated widely during the epidemic, both higher than those before the epidemic(P<0.05).The donation rate of first-time blood donors <25 years old and ≥25 years old varied widely and irregularly during the epidemic (both P<0.05). The percentage of first-time blood donors fluctuated irregularly during the epidemic, with overall percentage lower than that before the epidemic(P<0.05). 【Conclusion】 Whole blood donors from 26 blood stations increased after the outbreak of COVID-19, and some indicators in certain areas showed significant fluctuations during the epidemic.

Objective:To analyze the detection strategy and basic detection situation of markers of infectious diseases transmitted by transfusion in blood testing laboratories of blood stations in China.Methods:Based on the data of practice comparison working party of Blood Stations in Mainland of China from 2017 to 2021, the data on the testing strategies and the basic detection information of the markers for the transmission of infectious diseases through transfusion in the member laboratories of the practice comparison working party of Blood Stations in Mainland of China from 2017 to 2021 were collected, and the situation of the selection for testing markers, testing strategy and the testing method and other relevant aspects were sorted out and analyzed by charts.Results:The selection of the testing markers was consistent, but HTLV testing item was added in some member laboratories. The detection strategy of using two ELISA reagents and one nucleic acid testing (NAT) reagent simultaneously was adopted in 47 member blood stations; 3) NAT method was dominated by mini pool-NAT in member laboratories. The number of members adopting mini-pools of 8 (MP8)-NAT decreased from 17 in 2017 to 14 in 2021, while the number of members adopting mini-pools of 6 (MP6)-NAT increased from 13 in 2017 to 22 in 2021; Roche NAT system accounted for the largest proportion.Conclusions:In order to ensure blood safety and avoid missing detection, the blood stations still adopt the detection strategy of using two ELISA reagents and one nucleic acid testing (NAT) reagent simultaneously; Meanwhile, in order to increase the NAT positive rate, the proportion of mini pool-NAT mainly decreased year by year despite its dominating role, while the proportion of individual donation-NAT increased year by year; NAT method is transiting from mini-pools of 8 (MP8) to mini-pools of 6 (MP6); The proportion of imported NAT system used in NAT laboratory is relatively large.

Osteoporotic vertebral compression fracture (OVCF) can lead to lower back pain and may be even accompanied by scoliosis, neurological dysfunction and other complications, which will affect the daily activities and life quality of patients. Vertebral augmentation is an effective treatment method for OVCF, but it cannot correct unbalance of bone metabolism or improve the osteoporotic status, causing complications like lower back pain, limited spinal activities and vertebral refracture. The post-operative systematic and standardized rehabilitation treatments can improve curative effect and therapeutic efficacy of anti-osteoporosis, reduce risk of vertebral refracture, increase patient compliance and improve quality of life. Since there still lack relevant clinical treatment guidelines for postoperative rehabilitation treatments following vertebral augmentation for OVCF, the current treatments are varied with uneven therapeutic effect. In order to standardize the postoperative rehabilitation treatment, the Spine Trauma Group of the Orthopedic Branch of Chinese Medical Doctor Association organized relevant experts to refer to relevant literature and develop the "Guideline for postoperative rehabilitation treatment following vertebral augmentation for osteoporotic vertebral compression fracture (2022 version)" based on the clinical guidelines published by the American Academy of Orthopedic Surgeons (AAOS) as well as on the principles of scientificity, practicality and advancement. The guideline provided evidence-based recommendations on 10 important issues related to postoperative rehabilitation treatments of OVCF.

OBJECTIVE To study the improvement effects of Huorongcaohuangqi （HRCHQ） admixture decoction on mesangial proliferative glomerulonephritis （MsPGN）model rats and its mechanism . METHODS Totally 70 rats were divided into sham operation group （n＝10）and modeling group （n＝60）according to body weight . Sham operation group underwent sham operation，and MsPGN model was induced by immunological method （Freund’s adjuvant+BSA+lipopolysaccharide ）in modeling group. After successfully modeling ，50 rats were randomly divided into model group ，HRCHQ high -dose，medium-dose and low - dose groups （4.05，2.03，1.02 g/kg），Benazepril hydrochloride tablet group （20 mg/kg），with 10 rats in each group . Sham operation group and model group were given distilled water intragastrically ；other groups were given relevant medicine intragastrically 15 mL/kg，once a day ，for consecutive 5 weeks. After last administration ，the contents of total protein ，albumin and urea nitrogen were determined in the serum of rats . The expressions of transforming growth factor β1（TGF-β1）and tumor necrosis factor α（TNF-α）in renal tissue were detected by immunohistochemistry ；the expression of complement C 3 in renal tissue was detected by immunofluorescence . The phosphorylation level of phosphatidylinositol 3 kinase/protein kinase B/glycogen synthase kinase 3β（PI3K/Akt/GSK-3β） signal pathway related proteins and expression level of fibronectin （FN） in renal tissue were detected by Western blot . RESULTS Compared with model group，the serum contents of total protein and albumin were increased significantly in HRCHQ high -dose group （P＜0.05 or P＜0.01）. The serum content of urea nitrogen ， the E-mail：Houxia_75@163.com expressions of TGF -β1，TNF-α，FN and complement C 3，and the phosphorylation levels of PI 3K，Akt and GSK 3β protein were all decreased significantly （P＜0.05 or P＜0.01）. CONCLUSIONS HRCHQ can improve MsPGN by reducing the proliferation of mesangial cells and inhibiting the activity of PI 3K/ Akt/GSK3β signaling pathway .

Objective To investigate the development, hot spots and trends of event-related potentials for cognitive function research. Methods The literatures about application of event-related potentials in cognitive function research from 2011 to 2021 in CNKI and Web of Science core collection database were retrieved. The countries, authors, institutions, cited reference and keywords were extracted with CiteSpace to draw knowledge mapping. Results The most of researches came from the United States. For China, the author published the most researches was Zhan Xianghong, and the institute was the West China Mental Health Center of Sichuan University; the keywords such as P300 and depression were the most frequent, and researches focused on Alzheimer's disease, depression and schizophrenia, etc., which tended to use negative correlation changes of event-related potentials. Internationally, the author publishing the most researches was christian beste, and the institute was University of California, San Diego. The keywords such as attention and electroencephalograph were the most frequent, and researches focused on Alzheimer's disease and bipolar disorder, etc., which tended to focus on the P300 theta oscillation. Conclusion The application of event-related potential in cognitive function remains heat, to explore the cognitive dysfunction after various diseases.