Objective To assess the effects of different application sequences of neodymium-doped yttrium aluminum garnet(Nd∶YAG)laser and the desensitizing toothpaste containing stannous fluoride on dentinal tubule occlusion.Methods Twelve intact third molars freshly extracted from human were selected and prepared into dentin slices with a thickness of 0.8 mm.Each dentin slice was subdivided into four small slices,three of which were etched with 6% citric acid and randomly assigned to the following three groups(n=12):(1)control group:no treatment;(2)Nd∶YAG+toothbrushing(TB)group:first irradiated with Nd∶YAG laser and then brushed with desensitizing toothpaste;(3)TB+Nd∶YAG group:first brushed with desensitizing toothpaste and then irradiated with Nd∶YAG laser.The Nd∶YAG laser irradiation were carried out at 1 W,15 pulses/s,and the pulse width of 150 μs for 10 s(for a total of 6 cycles).After the above treatment,the 12 dentin slices from the Nd∶YAG+TB and TB+Nd∶YAG groups were randomly assigned to four subgroups(n=3)and subjected to acid etching in the Coca-Cola solution for 0,5,10,and 15 min.A scanning electron microscope was used to observe and photograph the dentin slices in each group,and eight single-blinded examiners scored the slices according to uniform criteria.The analysis of variance was carried out to compared the scores between groups.Results Before acid etching,the dentin tubule occlusion scores of the Nd∶YAG+TB and TB+Nd∶YAG groups were(4.83±0.09) scores and(3.85±0.66) scores,respectively,which had no significant difference between each other(P=0.0590)and were higher than that[(0.10±0.07)scores]of the control group(both P<0.0001).The dentin tubule occlusion scores of the Nd∶YAG+TB group after acid etching for 5,10,and 15 min were(4.33±0.60)scores,(4.27±0.24)scores,and(3.63±0.07)scores,respectively,which were not significantly different from those[(4.04±0.10)scores,(3.76±0.59)scores,and(3.17±0.29)scores,respectively]of the TB+Nd∶YAG group(all P>0.05).In the Nd∶YAG+TB subgroup,the dentin tubule occlusion score after acid etching for 15 min was significantly lower than that before acid etching(P=0.0011).In the TB+Nd∶YAG group,there was no statistically significant difference in the score between before and after acid etching(P>0.05).Conclusions Nd∶YAG laser irradiation with appropriate parameters combined with the use of desensitizing toothpaste could produce an excellent occluding effect on dentinal tubules regardless of the sequence.However,brushing with desensitizing toothpaste followed by Nd∶YAG laser irradiation produced more consistent dentin sealing after acid etching.
Humans ; Dentin ; Dentin Sensitivity/therapy* ; Lasers, Solid-State/therapeutic use* ; Microscopy, Electron, Scanning ; Toothpastes/pharmacology*

Background: Relative Dentin Abrasivity (RDA), as set by ISO 11609, is a standardized measurement on the abrasiveness of toothpaste. There are no published RDA values for Philippine-brand toothpastes. This study evaluated the degree of abrasion of five Philippine-brand toothpastes.

Objective: To compare qualitatively and quantitatively the abrasivity of five Philippine-brand toothpastes (Brands X, U, H, HN, G) to two foreign-brand toothpastes Brand C (RDA 68) and Brand P (RDA 150).

Methods: Twenty-four bovine dentin samples were brushed with a slurry of each of the toothpaste using a toothbrushing machine. A profilometer, scanning electron microscope and a visual measuring scope were used to determine abrasivity through the before-and-after-brushing surface roughness.

Results: Ranked based on the difference of the means for surface roughness, before-and-after brushing, in decreasing order of abrasivity are: Brands P, X, U, H, C, HN, and G. Using Dunn's test-post hoc test for Kruskal-Wallis test at p ? 0.05, we showed that the abrasivity of Brands G, H, and HN were not significantly different from Brand C, and Brand X was not significantly different from Brand P. Brand U was significantly less abrasive than Brand P and significantly more abrasive than Brand C.

Conclusion: Brands G, H, and HN can be considered as low-abrasive toothpastes, Brand X a high abrasive toothpaste, and with Brand U was unclear as to category. Findings from qualitative data support the quantitative data.

OBJECTIVES: The purpose of the study was to evaluate the effect of hydroxyapatite (HA)-based desensiti-zing agents and determine their influence on the bonding performance of mild universal adhesives. METHODS: Mid-coronal dentin samples were sectioned from human third molars and prepared for a dentin-sensitive model. According to desensitizing applications, they were randomly divided into four groups for the following treatments: no desensitizing treatment (control), Biorepair toothpaste (HA-based desensitizing toothpaste) treatment, Dontodent toothpaste (HA-based desensitizing toothpaste) treatment, and HA paste treatment. Dentin tubular occlusion and occluded area ratios were evaluated by scanning electron microscopy (SEM). Furthermore, All-Bond Universal, Single Bond Universal, and Clearfil Universal Bond were applied to the desensitized dentin in self-etch mode. The wettability and surface free energy (SFE) of desensitized dentin were evaluated by contact angle measurements. Bonded specimens were sectioned into beams and tested for micro-tensile bond strength to analyze the effect of desensitizing treatment on the bond strength to dentin of universal adhesives. RESULTS: SEM revealed that the dentin tubule was occluded by HA-based desensitizing agents, and the area ratios for the occluded dentin tubules were in the following order: HA group>Biorepair group>Dontodent group (P<0.05). Contact angle analysis demonstrated that HA-based desensitizing agents had no statistically significant influence on the wettability of the universal adhesives (P>0.05). The SFE of dentin significantly increased after treatment by HA-based desensitizing agents (P<0.05). The micro-tensile bond strength test showed that HA-based desensitizing toothpastes always decreased the μTBS values (P<0.05), whereas the HA paste group presented similar bond strength to the control group (P>0.05), irrespective of universal adhesive types. CONCLUSIONS HA-based desensitizing agents can occlude the exposed dentinal tubules on sensitive dentin. When mild and ultra-mild universal adhesives were used for subsequent resin restoration, the bond strength was reduced by HA-based desensitizing toothpastes, whereas the pure HA paste had no adverse effect on bond strength.
Humans ; Dental Cements/analysis* ; Dentin/chemistry* ; Durapatite/pharmacology* ; Tensile Strength ; Toothpastes

OBJECTIVES: This study aimed to measure the efficacy of different tooth-brushing methods for removing plaque in Korea. METHODS: This study was conducted with the approval of the Institutional Review Board (IRB) of the Seoul National University School of Dentistry (S-D20180021). Thirty participants aged between 19 and 30 years, who did not have periodontal disease, were enrolled in this observational study. Participants were given the same type of toothbrush and toothpaste and asked to brush their teeth as they usually would. During brushing, participants were recorded with a camcorder that was attached to a mirror. Participants were aware they were being recorded. After they had finished brushing their teeth, a dental plaque staining and oral plaque index (PI) examination was performed. The PI score was measured using the Turesky modified Quigley Hein Index. Brushing methods were classified as rolling, horizontal, vertical, circling, and oblique. Skipped surfaces were recorded separately. Following this, statistical analysis was performed using SPSS software. RESULTS: Most surfaces of the mouth were skipped. The most commonly used brushing method was the circling method, followed by the vertical, horizontal, rolling, and oblique methods. The most frequently used method on the vestibular surface was circling, with 52.92% of the oral surface skipped. The oblique brushing method had the lowest mean PI score with a mean±SD of 1.73±0.82. The mean PI score of the skipped surfaces was the highest with a mean±SD of 2.52±0.81. We also analyzed the linear mixed model considering the different lengths of time spent brushing. Both the brushing method used and the time spent brushing had a significant effect on the PI score, but no interactions between these were observed. In areas where a horizontal brushing method had been used, the PI score was significantly decreased. CONCLUSIONS: This study suggests that the horizontal brushing method is an efficient tooth-brushing method compared to the other methods. Additionally, tooth-brushing for more than 10 seconds on 3 to 4 teeth area was effective in removing dental biofilm.
Biofilms ; Dental Plaque Index ; Dental Plaque ; Dentistry ; Ethics Committees, Research ; Humans ; Korea ; Methods ; Mouth ; Observational Study ; Oral Hygiene ; Periodontal Diseases ; Seoul ; Tooth ; Toothpastes ; Video Recording

OBJECTIVES: To examine the tooth whitening effects of a 3% hydrogen peroxide gel.METHODS: Twenty participants were given experimental tooth whitening gels containing 3% hydrogen peroxide, and another 20 participants, who served as the control group, were given tooth whitening gels that contained no hydrogen peroxide. Both groups used their respective whitening agents for 1 week, and tooth lightness was examined at baseline and 4 and 7 days after the experiment.RESULTS: Compared with the control group, in the experimental group, lightness values, determined using VITA classical A1-D4® and VITA SYSTEM 3D-MASTER®, were significantly increased after using the 3% hydrogen peroxide whitening agent (P < 0.01) both 5 and 7 days post-application (P < 0.05).CONCLUSIONS: The study findings confirmed that an improved tooth whitening effect could be expected with the use of a new type of whitening gel containing 3% hydrogen peroxide.
Bleaching Agents ; Gels ; Hydrogen Peroxide ; Hydrogen ; Tooth Bleaching ; Tooth ; Toothpastes

This study aimed to evaluate the antimicrobial effects of Acanthopanax sessiliflorum fruit (ASF; Ogaza) extracts on Streptococcus mutans and Streptococcus sobrinus, which are agents that cause dental caries, and on Streptococcus mitis and Streptococcus salivarius, the microbial flora of the oral cavity. The ASF extracts obtained using 70% ethanol were fractionated in the order of ethyl acetate and n-Butanol, concentrated under reduced pressure, and lyophilized to give powdery solvent extracts. The antimicrobial activity of ASF extracts from each solvent was examined using the disk diffusion method. As a result, only those extracts obtained using an ethyl acetate solvent showed antimicrobial activity. These extracts were selected, and the minimum inhibitory concentration was measured by disk diffusion method at various extract concentrations. Results showed a minimum inhibitory concentration of 32 mg/ml. The viable cell count was measured to confirm the minimum bactericidal concentration. Results showed a minimum bactericidal concentration of 64 mg/ml. In the cytotoxicity test using normal human dermal fibroblast cells, the absorbance value of the test group was similar to that of the control group at 0.64, 1.28, and 6.4 mg/ml. The bacteria and their colonies were examined using a scanning electron microscope. Boundaries between the antimicrobial activity region and non-antimicrobial activity region were observed around the paper disk, which was immersed in the extract with 32 mg/ml concentration. Bacterial colonization was not observed in the area with antimicrobial activity. This finding suggests that ASF extracts can inhibit the growth of some microorganisms in the oral cavity, in addition to the effects of these extracts known to date. In particular, ASF extracts may be used as a preparation for preventing dental caries by adding the extract to the toothpaste or oral mouthwash.
1-Butanol ; Bacteria* ; Cell Count ; Colon ; Dental Caries ; Diffusion ; Eleutherococcus* ; Ethanol ; Fibroblasts ; Fruit* ; Humans ; Methods ; Microbial Sensitivity Tests ; Mouth ; Streptococcus ; Streptococcus mitis ; Streptococcus mutans ; Streptococcus sobrinus ; Toothpastes

Polyphenon 60 refers to the mixture of catechins present in green tea. The aim of this study was to investigate the antimicrobial activities of polyphenon 60 against 4 strains of Streptococcus mutans and 2 strains of Streptococcus sorbrinus, which are the major causative bacteria of dental caries. The minimum bactericidal concentration (MBC) values of polyphenon 60 for S. mutans and S. sobrinus were determined and the effect of biofilm formation inhibition of that was evaluated. The MBC value of polyphenon 60 against the bacterial strains was 2.5 mg/ml except for one particular strain, S. mutans KCOM 1128 for which the value was 1.25 mg/ml. The results of biofilm formation inhibition assay revealed that polyphenon 60 inhibited biofilm formation more than 90% at a concentration of 2.5 mg/ml. It was apparent that polyphenon exhibited biofilm formation inhibition activity along with bactericidal effect against S. mutans and S. sobrinus. Therefore, it is proposed that polyphenon 60 as one of the components of bactericidal agents could be useful in developing oral hygiene products, toothpaste or gargling solution.
Bacteria ; Biofilms ; Catechin ; Dental Caries ; Oral Hygiene ; Streptococcus mutans ; Streptococcus sobrinus ; Streptococcus ; Tea ; Toothpastes

OBJECTIVES: As a first step to study the anticaries effect of ethanol alone, we investigated the effects of ethanol on the expression levels of the atpB gene and proton permeability of Streptococcus mutans in suspension cultures. METHODS: S. mutans UA159 was grown in brain heart infusion medium at either pH 4.8 or 6.8. The total extracted RNA was reverse-transcribed into cDNA using a Superscript™ First-Strand Synthesis System. The resulting cDNA and negative controls were amplified by ABI PRISM 7700 real-time PCR system with SYBR Green PCR Master Mix. For proton flux assay, bacterial suspensions were titrated to pH 4.6 with 0.5 M HCl, and then additional 0.5 M HCl was added to decrease the pH values by approximately 0.4 units. The subsequent increase in pH was monitored using a glass electrode. Ten percent (v/v) butanol was added to the suspensions at 80 min to disrupt the cell membrane. RESULTS: In a concentration-dependent manner, ethanol alone not only decreased the growth rate of S. mutans and the expression of the atpB gene but also increased the proton permeability at both pH 4.8 and 6.8. CONCLUSIONS: These findings suggest that ethanol has the potential for an anticaries ingredient. We believe that ethanol may be used together with fluoride and/or other cariostatic agents in order to develop better anticaries toothpastes and/or mouthrinses.
Brain ; Cariostatic Agents ; Cell Membrane ; DNA, Complementary ; Electrodes ; Ethanol ; Fluorides ; Gene Expression ; Glass ; Heart ; Hydrogen-Ion Concentration ; Permeability ; Polymerase Chain Reaction ; Protons ; Real-Time Polymerase Chain Reaction ; RNA ; Streptococcus mutans ; Streptococcus ; Suspensions ; Toothpastes

The aim of this study was to compare fluoride release and surface changes according to different orthodontic bracket adhesives the application of fluoride products. We used non-fluoridated composite resin Transbond fluoridated composite resins Blugloo and LightBond, resin-modified glass ionomer Rely XTM Luting 2, and conventional glass ionomer Fuji I®. Fluoride release of five orthodontic bracket adhesives and fluoride release ability after application of three fluoride products (1.23% acidulated phosphate fluoride gel, Tooth Mousse Plus®, Fluor Protector, and a toothbrush with sodium fluoride-containing toothpaste) were measured using a fluoride electrode that was connected to an ion analyzer. After 4 weeks of fluoride application, the surface roughness and surface morphology were examined using a surface roughness tester and field emission scanning electron microscopy. The amounts of fluoride release were observed not only on application of Tooth Mousse Plus® and Fluor Protector on resin-modified glass ionomer Rely XTM Luting 2 and Fuji I®, but also during tooth brushing using fluoride-containing toothpaste. After application of Tooth Mousse Plus®, except Transbond XT, the surface roughness increased, and all orthodontic adhesives showed a partial drop of micro-particle filler. On application of 1.23% acidulated phosphate fluoride gel on all orthodontic bracket adhesives, their surface roughness increased. To bond the orthodontic bracket, resin-modified glass ionomer Rely XTM Luting 2 and Fuji I® adhesives are highly recommended if the amount of fluoride release is considered to confer a preventative effect on dental caries, and among the fluoride products, Tooth Mousse Plus® and Fluor Protector are better than 1.23% acidulated phosphate fluoride gel, and these are expected to prevent dental caries even during tooth brushing with fluoride-containing toothpaste.
Acidulated Phosphate Fluoride ; Adhesives* ; Composite Resins ; Dental Caries ; Dental Cements ; Electrodes ; Fluorides* ; Glass ; Microscopy, Electron, Scanning ; Orthodontic Brackets* ; Sodium ; Surface Properties* ; Tooth ; Toothpastes

In this study, total fluoride (TF) in commercial toothpastes for children in Korea was evaluated and compared with the fluoride concentration declared by the manufacturer (Declared F). Additionally, total soluble fluoride (TSF) was evaluated and compared with TF.Ten toothpastes were coded with letters to allow blind analysis. For evaluation of TF, each toothpaste was homogenized in deionized water. For evaluation of TSF, each toothpaste was centrifuged and then, the supernatant of the sample was evaluated. Fluoride concentrations were assessed using a fluoride electrode coupled to an ion analyzer.Only one toothpaste showed lower TF concentration than Declared F. In all toothpastes, TSF was similar to the TF.
Child ; Dentifrices ; Electrodes ; Fluorides ; Humans ; Korea ; Toothpastes ; Water