BACKGROUND:With the innovation of examination technique,the number of patients with spinal metastases in different stages is increasing year by year.Percutaneous vertebroplasty is an important treatment for spinal metastases;however,there is no report on the biomechanical effect in different stages and different activities after operation. OBJECTIVE:To simulate thoracic T10 bone stress and displacement of the different locations of the tumor metastasis based on the three-dimensional finite element model. METHODS:According to thoracic three-dimensional CT images of a 30-year-old healthy male,Mimics software was used to construct a three-dimensional geometric model of thoracic vertebrae(T9-T11),including ribs,ligaments and intervertebral discs.Three-dimensional models of T9-T11 vertebral bodies and different parts of the posterior thoracic vertebrae invaded by thoracic metastatic tumors were simulated,including the control group with intact vertebral structure,unilateral metastasis involving the vertebral body area(experimental group 1),unilateral metastasis involving the vertebral body and pedicle area(experimental group 2),unilateral metastasis involving the vertebral body,pedicle and transverse process area(experimental group 3),and bilateral metastasis involving the vertebral body,pedicle and transverse process area(experimental group 4).Abaqus software was used to create a three-dimensional finite element model.The von Mises stress distribution and the displacement of the model were analyzed under the loading condition,buckling condition,extension condition,and rotation condition. RESULTS AND CONCLUSION:(1)In the study of the maximum total displacement of loading points in different experimental groups under loading,flexion,extension,and rotation conditions,with the increase of metastatic tumor invasion site and invasion surface,the total displacement of loading points increased,and the overall stiffness decreased,especially the total displacement of loading points in experimental group 4 was the largest.(2)Under flexion condition,the maximum Von Mises stress value increased significantly after vertebral body and pedicle destruction,while the maximum Von Mises stress value was almost unchanged when the thoracocostal joint destruction was added.(3)On the basis of finite element analysis and simulation of bone tumor model,the elements in the bone cement region were set as a single set,and the bone cement region was set as the corresponding material properties to simulate bone cement filling.The results showed that the maximum total displacement under loading,flexion,extension,and rotation conditions was less than that of each experimental group.(4)The maximum stress values of the simulated percutaneous vertebroplasty patients in the loading,flexion,extension and rotation conditions were significantly lower than those of the femoral model.(5)It is concluded that the three-dimensional finite element model based on thoracic T9-T11 conducive to the biomechanics characteristics of thoracic vertebrae tumor metastasis,and on the basis of the thoracic vertebrae tumor metastasis model can accurately simulate load point after percutaneous vertebral body under different conditions of total displacement and the maximum Von Mises stress situation.

Objective:Differences between randomized controlled trial (RCT) results and real world study (RWS) results may not represent a true efficacy-effectiveness gap because efficacy-effectiveness gap estimates may be biased when RWS and RCT differ significantly in study design or when there is bias in RWS result estimation. Secondly, when there is an efficacy- effectiveness gap, it should not treat every patient the same way but assess the real-world factors influencing the intervention's effectiveness and identify the subgroup likely to achieve the desired effect.Methods:Six databases (PubMed, Embase, Web of Science, CNKI, Wanfang Data, and VIP) were searched up to 31 st December 2022 with detailed search strategies. A scoping review method was used to integrate and qualitatively describe the included literature inductively. Results:Ten articles were included to discuss how to use the RCT research protocol as a template to develop the corresponding RWS research protocol. Moreover, based on correctly estimating the efficacy-effectiveness gap, evaluate the intervention effect in the patient subgroup to confirm the subgroup that can achieve the expected benefit-risk ratio to bridge the efficacy-effectiveness gap.Conclusion:Using real-world data to simulate key features of randomized controlled clinical trial study design can improve the authenticity and effectiveness of study results and bridge the efficacy-effectiveness gap.

Objective:Randomized controlled trials (RCT) usually have strict implementation criteria. The included subjects' characteristics of the conditions for the intervention implementation are quite different from the actual clinical environment, resulting in discrepancies between the risk-benefit of interventions in actual clinical use and the risk-benefit shown in RCT. Therefore, some methods are needed to enhance the extrapolation of RCT results to evaluate the real effects of drugs in real people and clinical practice settings.Methods:Six databases (PubMed, Embase, Web of Science, CNKI, Wanfang Data, and VIP) were searched up to 31 st December 2022 with detailed search strategies. A scoping review method was used to integrate and qualitatively describe the included literature inductively. Results:A total of 12 articles were included. Three methods in the included literature focused on: ①improving the design of traditional RCT to increase population representation; ②combining RCT Data with real-world data (RWD) for analysis;③calibrating RCT results according to real-world patient characteristics.Conclusions:Improving the design of RCT to enhance the population representation can improve the extrapolation of the results of RCT. Combining RCT data with RWD can give full play to the advantages of data from different sources; the results of the RCT were calibrated against real-world population characteristics so that the effects of interventions in real-world patient populations can be predicted.

ObjectiveTo study the effect of Tanreqing injection （TRQ） on the pulmonary flora in the rat model of chronic obstructive pulmonary disease （COPD）. MethodWistar rats were randomized into control， model， and TRQ groups. The rats in other groups except the control group were treated by smoking combined with intratracheal instillation of lipopolysaccharide for the modeling of COPD. The TRQ group was intraperitoneally injected with TRQ （2 g·kg^-1）. At the end of the experiment， after blood collection from the abdominal aorta of the rats， the lung tissue was collected for hematoxylin-eosin and picric sirius red staining to reveal the pathological changes. The lung lavage fluid was collected， and the diversity and relative abundance of lung flora in different groups were analyzed by 16S rDNA amplicon sequencing. ResultThe lungs of the control group were normal， and those of the model group showed neutrophil infiltration， telangiectasia， lung hemorrhage and emphysema in individual cases， and thickening of collagen fibers in the trachea. Compared with the model group， the TRQ group showed significantly improved lungs and recovered collagen fibers. The MLI analysis showed that compared with the control group， the model group showcased increased alveolar space （P<0.01）， which was reduced in the TRQ group （P<0.05）. Compared with the control group， the model group showed increased wall thickness （P<0.01）， and the increase was attenuated in the TRQ group （P<0.01）. TRQ increased the Simpson index and altered the α diversity of pulmonary flora. The results of principal co-ordinate analysis showed that TRQ changed the β diversity and reduced the β diversity index of pulmonary flora. At the genus level， the model group showed increased relative abundance of g_Bacillus and g_Brevundimonas and decreased relative abundance of g_Pseudomonas， compared with the control group. After treatment with TRQ， the relative abundance of g_Stenotrophomonas increased， and that of g_Bacillus decreased. The LEfSe of differential taxa between groups showed that the modeling increased the relative abundance of g_Lachnospiraceae_NK4A136_group， and TRQ treatment increased the relative abundance of g_Rhodococcus and g_Stenotrophomonas. ConclusionTRQ can regulate the diversity of pulmonary flora and restore the balance of bacterial genera in the rat model of COPD， which may be one of the mechanisms of the prevention and treatment of COPD with TRQ.

Objective:To analyze the role of preoperative circulating tumor cell(CTC) and circulating tumor vascular endothelial cells (CTEC) in the diagnosis of gastric cancer and its correlation with the clinicopathological characteristics of gastric cancer.Methods:Sixty-two gastric cancer patients and 11 patients of benign gastric diseases were enrolled. Subtraction enrichment (SE) and immunofluorescence staining-chromosome fluorescence in situ hybridization (i·FISH) were used to integrate the unique SE-i ·FISH technology platform detecting patients′ CTC and CTEC.Results:The number of CTC in the gastric cancer group was significantly higher than that in the control group ( t=2.693, P=0.009); the number of CTEC in the gastric cancer group was higher than the control group ( t=2.015, P=0.048). With the cut-off value being set at 9 cells/6 ml in blood, the sensitivity of CTC in the diagnosis of gastric cancer is 84%, and the specificity is 82% (AUC=0.876, 95% CI, 0.792-0.963, P<0.01); When set at 6 cells/6 ml, the sensitivity of CTEC in the diagnosis of gastric cancer is 50%, and the specificity is 100%(AUC=0.727, 95% CI, 0.603-0.851, P=0.02). CTC positive is closely related to tumor location(χ 2=4.292, P=0.038 ) and TNM stage(CTC≥10, χ 2=4.848, P=0.028; CTC≥11, χ 2=6.234, P=0.013). CTEC positive is closely related to serum CA19-9(χ 2=4.858, P=0.028) and serum CA724 (χ 2=4.108, P=0.043 ) . Conclusion:SE-i·FISH technology has high sensitivity and specificity in the detection of CTC and CTEC of gastric cancer.

The ongoing pandemic of Coronavirus disease 19 (COVID-19) is caused by a newly discovered β Coronavirus named severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). How long the adaptive immunity triggered by SARS-CoV-2 can last is of critical clinical relevance in assessing the probability of second infection and efficacy of vaccination. Here we examined, using ELISA, the IgG antibodies in serum specimens collected from 17 COVID-19 patients at 6-7 months after diagnosis and the results were compared to those from cases investigated 2 weeks to 2 months post-infection. All samples were positive for IgGs against the S- and N-proteins of SARS-CoV-2. Notably, 14 samples available at 6-7 months post-infection all showed significant neutralizing activities in a pseudovirus assay, with no difference in blocking the cell-entry of the 614D and 614G variants of SARS-CoV-2. Furthermore, in 10 blood samples from cases at 6-7 months post-infection used for memory T-cell tests, we found that interferon γ-producing CD4
Adaptive Immunity/physiology* ; Adult ; Aged ; Antibodies, Neutralizing/blood* ; COVID-19/immunology* ; Cohort Studies ; Female ; Humans ; Immunoglobulin G/blood* ; Male ; Middle Aged ; SARS-CoV-2/immunology* ; T-Lymphocytes/physiology* ; Time Factors ; Viral Proteins/immunology*

Objective To investigate the accuracy and application value of optical surface monitoring system in intensity modulated radiotherapy for thoracic tumors patients.Methods Twenty-eight patients with thoracic tumors were included.During each treatment fraction,the patients were immobilized with body surface markers and laser lamps.The surface images obtained by the optical surface monitoring system were registered with the reference images and recorded during the CBCT scan.The translation and rotation errors of x (left-right),y (craniocaudal) and z (anterior-posterior) axes were recorded.After scanning,the CBCT images were registered with the planned CT images and the translation and rotation errors of x,y and z axes were recorded.The setup errors of these two image systems were analyzed and corrected before each treatment.The correlation between the two sets of setup errors were analyzed with Pearson test,and systematic error (∑) and random error (σy) were also calculated.The consistency of the two image systems was evaluated with the Bland-Altman method and the 95％ limits of agreement were calculated.Results There was a good correlation between these two groups,and the correlation coefficients were 0.79,0.62,and 0.53 in x,y and z axes,respectively.The ∑/σr of the optical surface monitoring system were 0.7 mm/1.5 mm,0.9 mm/1.8 mm and 0.9 mm/1.5 mm in x,y and z axes,respectively.The ∑/σ of CBCT were 0.8 mm/1.6 mm,1.3 mm/1.9 mm and 0.7 mm/1.5 mm in x,y and z axes,respectively.The 95％ limits of agreement of translations direction were (-2.0-2.3),(-3.4-3.6) and (-3.3-2.4) mm,and the 95％ limits of agreement of rotation direction were (-2.0 to 1.6)°,(-2.0 to 1.4)° and (-1.6 to 1.6)° inx,y and z axes,respectively.Conclusions The optical surface monitoring system is an effective image guide tool,which can quickly and accurately verify the patient's position and improve the position accuracy.It can be applied for positioning in the intensity modulated radiation treatments for the thoracic tumor patients.

Objective: To evaluate the effect of minimally invasive surgery on acceleration orthodontic tooth movement by meta-analysis. Methods: All literatures about minimally invasive surgery accelerating tooth moment were searched from the database in general. The literatures were screened according to the correlation and the inclusion criteria, included literatures were analyzed by RevMan 5. 3. Results: 5 articles including 85 patients were included in this review, 4 of which reported that minimally invasive surgery can accelerate orthodontic tooth movement, but 1 reported no statistical difference in alleviating mandibular anterior crowding between minimally invasive surgery acceleration orthodontic group and conventional orthodontic group. Higher tooth movement rate was found with the minimally invasive surgical procedures by a weighted mean difference of 0. 70 mm in 1 month of canine retraction (WMD = 0. 7: 95％ CI(0. 57, 0. 82); P＜ 0. 001) and by a weighted mean difference 1. 31 mm in 2 months (WMD = 1. 31: 95％ CI (0. 69, 1. 92), P＜ 0. 001). No obvious adverse effects were observed in periodontal condition, pain, satisfaction, root resorption and anchorage control. Conclusion: According to current studies, minimally invasive surgery can accelerate single tooth movement, but the evidence is insufficient to prove that the entire orthodontic treatment time can be shortened.

Objective To analyze the setup errors by cone-beam computed tomography (CBCT) for breast cancer patients who were immobilized with neck and breast thermoplastic mask and received intensity modulated radiation therapy (IMRT), and to calculate the external margins from the clinical target volume (CTV) to the planning target volume (PTV) (MPTV) of tumors. Methods Twenty-five breast cancer patients who were immobilized with neck and breast thermoplastic mask and received IMRT in the Oncology Department of Tongji Hospital Affiliated to Tongji Medical College of Huazhong University of Science and Technology from November 2016 to June 2017 were enrolled. The position of the patients were verified by CBCT before treatment . The linear and rotation errors of the X, Y and Z axes were analyzed by online bone registration. The systematic errors (Σ) and random errors (σ) of the patients were also calculated, and then the margins from CTV to PTV margins were calculated based on MPTV=2.5Σ+0.7σ. 25 patients'height, weight, body mass index (BMI) and the maximum diameters of CTV in the lateral, longitudinal and vertical directions were recorded, and the relation between the setup errors and the above mentioned was analyzed by using Spearman method. Results A total of 174 CBCT scans for 25 breast cancer patients were completed. The group Σ were 1.40 mm, 1.50 mm and 1.20 mm, and rotation errors were 0.9°, 0.7° and 0.8° at the X, Y and Z axes, respectively. The group σ were 2.20 mm, 3.00 mm and 1.40 mm, and rotation errors were 0.7°, 0.6° and 0.7° at the X, Y and Z axes, respectively. MPTVwas recommended as 4.90 mm, 6.00 mm and 3.90 mm at the X, Y and Z axes, respectively. There was no correlation between the height, weight, BMI of the patients and the setup errors (all P ＞ 0.05). However, there was a significant correlation between the maximum lateral, longitudinal diameters of the CTV and the setup errors (rs= 0.406, P= 0.044; rs= 0.512, P= 0.009). Conclusions The neck and breast thermoplastic mask can improve the diagnostic accuracy of radiotherapy in breast cancer patients. The data of setup errors verified by CBCT can provide meaningful references for the setting of MPTV.

Objective:To systematically evaluate the volumetric changes of upper airway after rapid maxillary expansion using Meta analysis.Methods:All literatures about volumetric changes in the upper airway after rapid maxillary expansion were searched from the database in general.The literatures were screened according to the correlation and the inclusion criteria,included the literatures were analyzed by Rev Man 5.3.Results:11 literatures were finally selected.Meta analysis indicated that,after treatment nasopharyngeal volume increased by 0.62 cm3(P=0.000 2),palatopharyngeal volume increased by 0.62 cm3(P=0.02),glossopharyngeal volume increased by 0.39 cm3(P=0.11),oropharyneal volume increased by 0.40 cm3(P=0.27).Conclusion:The existing evidence indicates that rapid maxillary expansion can increase the volume of nasopharynx and retropalatal part of upper airway.