Qualitative and quantitative analysis methods for chemical components of different processed products of Corni Fructus were established to systematically characterize and identify these components, and the content of the main differential components was determined. The chemical components of different processed products of Corni Fructus were collected using ultra-high performance liquid chromatography-quadrupole time-of-flight tandem mass spectrometry(UPLC-Q-TOF-MS). Through analysis of self-built databases, literature, and reference standards, a total of 93 components were obtained, including 19 iridoids, 15 flavonoids, 16 organic acids, eight triterpenoids, eight tannins, four amino acids, two polysaccharides, five olefins, and 16 other compounds. Additionally, by using multivariate statistical methods, the differential components between different processed products of Corni Fructus were screened under the conditions of VIP>1.0 and FC<0.5 or FC>2.0 and P<0.05. The PCA and OPLS-DA results showed differences in the chemical components between different processed products of Corni Fructus. A total of 21 differential components were screened, including tartaric acid, morroniside, and rutin. On this basis, ultra-high performance liquid chromatography-triple quadrupole tandem mass spectrometry(UPLC-QqQ-MS/MS) was used to determine the content of 10 main common differential components, including gallic acid, morroniside, ursolic acid, loganin, swertiamarin, rutin, 5-hydroxymethylfurfural, cornuside Ⅰ, quercetin, and oleanolic acid. The above 10 components showed a good linear relationship within the determined concentration range, with the precision, stability, repeatability, and sample recovery rate all meeting the requirements. Compared with that in Corni Fructus, the content of iridoid glycosides in wine-prepared Corni Fructus and wine-and honey-prepared Corni Fructus decreased, while the content of gallic acid, rutin, quercetin, 5-hydroxymethylfurfural, ursolic acid, and oleanolic acid increased. Compared with wine-prepared Corni Fructus, wine-and honey-prepared Corni Fructus showed varying degrees of increase in all other components, except for a slight decrease in gallic acid content. In summary, this study clarified the influence of different processing methods on the chemical components of Corni Fructus, providing a theoretical basis for the scientific connotation, overall quality evaluation, and clinically rational application of Corni Fructus processing in the future.
Tandem Mass Spectrometry/methods* ; Chromatography, High Pressure Liquid/methods* ; Cornus/chemistry* ; Drugs, Chinese Herbal/chemistry* ; Fruit/chemistry*

As a new type of production factor that can empower the development of new quality productivity, the data element is an important engine to promote the high quality development of the industry. Traditional Chinese medicine(TCM) dispensing is the most basic work of TCM clinical pharmacy, and its quality directly affects the clinical efficacy of TCM. The integration of data elements and TCM dispensing can stimulate the innovation and vitality of the TCM dispensing industry and promote the high-quality and sustainable development of the industry. A large-scale, detailed, and systematic study on TCM dispensing was conducted. The innovative practice path of data fusion construction in the whole process of TCM dispensing was investigated by integrating the digital resources "nine full activities" of TCM dispensing, creating the digital dictionary of "TCM clinical information data elements", and exploring innovative applications of TCM dispensing driven by data and technology, so as to promote the standardized, digital, and intelligent development of TCM dispensing in medical health services. The research content of this project was successfully selected as the second batch of "Data element×" typical cases of National Data Administration in 2024, which is the only selected case in the field of TCM.
Medicine, Chinese Traditional/methods* ; Drugs, Chinese Herbal ; Humans

Secondary organic aerosol(SOA)produced by photooxidation of styrene and other aromatic compounds is a major part of fine particles in urban atmosphere.In this study,the measurement of component and content of SOA formed from photooxidation of styrene in smog chamber using synchronous radiation vacuum-ultraviolet photoionization aerosol mass spectrometer(VUV-PIAMS)was conducted.Photoionization mass spectra of styrene SOA was detected by synchrotron radiation photon with 10.5 eV,and the proportion of main components was quantified based on the peak area of each ion peak.The photoionization efficiency curve of ion peak was obtained under synchrotron radiation photons in the range from 7.5 to 11.5 eV,and then the ionization potential was acquired for qualitative analysis of the component structure.The results showed that the photoionization mass spectra of styrene SOA mainly contained ion peaks at m/z 106,108,120 and 122,and the ionization potentials of each peak were(9.41±0.03)eV,(8.93±0.03)eV,(9.24±0.03)eV and(9.25±0.03)eV,respectively.Combined with quantum chemistry calculation and off-line measurement verification of infrared absorption spectra and electrospray ionization mass spectra,it was determined that benzaldehyde,benzyl alcohol,4-vinylphenol and benzoic acid were main components of styrene SOA,accounting for 32.5%,17.5%,25%and 15%of the measured components,respectively,and the generated quantity ratio was 13∶7∶10∶6.VUV-PIAMS could overcome the disadvantages of off-line method,and could on-line detect component and content of SOA,proving a useful tool to measure the chemical components and reveal the formation process of SOA particles.

OBJECTIVE: To predict the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training based on the modified Wright learning curve model, then to analyze and applicate the learning curve. METHODS: Twelve graduate students participating in standardized dental resident training were selected to prepare the resin maxillary central incisors on phantom head simulators for all ceramic crowns 4 times. The results of preparation were evaluated by 3 prosthetic experts with at least 10 years' experience focusing on the reduction, contour, taper, shoulder, finish line, margin placement, adjacent tooth injury, and preparation time for tooth preparation. The learning rate of tooth preparation was calculated by scores of tooth preparation of 4 times. The learning curve of tooth preparation was predicted based on the modified Wright learning curve model. According to the criteria of standardized training skill examinations for dental residents in Beijing, 80 was taken as the qualified standard score. The minimum training times for tooth preparation to satisfy the qualified standard score (80) was calculated, to analyze the characteristics of learning curve and evaluate the effectiveness of tooth preparation. RESULTS: The scores of 4 tooth preparation were 64.03±7.80, 71.40±6.13, 74.33±5.96, and 75.98±4.52, respectively. The learning rate was (106±4)%, which showed the learning curve an upward trend. There were no significant differences between the qualified standard score and the predicted scores of tooth preparation from the 5^th preparation to the 13^th preparation (P > 0.05). The predicted score of the 14^th preparation was higher than the qualified standard score (P < 0.05). CONCLUSION The trend of the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training is upward, which predicts the minimum training times higher than the qualified standard score is 14 times.
Humans ; Tooth Preparation, Prosthodontic/methods* ; Incisor ; Learning Curve ; Crowns ; Tooth Preparation ; Ceramics ; Dental Porcelain ; Dental Prosthesis Design

OBJECTIVE: To observe the effect of amygdalin on liver fibrosis in a liver fibrosis mouse model, and the underlying mechanisms were partly dissected in vivo and in vitro. METHODS: Thirty-two male mice were randomly divided into 4 groups, including control, model, low- and high-dose amygdalin-treated groups, 8 mice in each group. Except the control group, mice in the other groups were injected intraperitoneally with 10% carbon tetrachloride (CCl₄)-olive oil solution 3 times a week for 6 weeks to induce liver fibrosis. At the first 3 weeks, amygdalin (1.35 and 2.7 mg/kg body weight) were administered by gavage once a day. Mice in the control group received equal quantities of subcutaneous olive oil and intragastric water from the fourth week. At the end of 6 weeks, liver tissue samples were harvested to detect the content of hydroxyproline (Hyp). Hematoxylin and eosin and Sirius red staining were used to observe the inflammation and fibrosis of liver tissue. The expressions of collagen I (Col-I), alpha-smooth muscle actin (α-SMA), CD31 and transforming growth factor β (TGF-β)/Smad signaling pathway were observed by immunohistochemistry, quantitative real-time polymerase chain reaction and Western blot, respectively. The activation models of hepatic stellate cells, JS-1 and LX-2 cells induced by TGF-β1 were used in vitro with or without different concentrations of amygdalin (0.1, 1, 10 µmol/L). LSECs. The effect of different concentrations of amygdalin on the expressions of liver sinusoidal endothelial cells (LSECs) dedifferentiation markers CD31 and CD44 were observed. RESULTS: High-dose of amygdalin significantly reduced the Hyp content and percentage of collagen positive area, and decreased the mRNA and protein expressions of Col-I, α-SMA, CD31 and p-Smad2/3 in liver tissues of mice compared to the model group (P<0.01). Amygdalin down-regulated the expressions of Col-I and α-SMA in JS-1 and LX-2 cells, and TGFβ R1, TGFβ R2 and p-Smad2/3 in LX-2 cells compared to the model group (P<0.05 or P<0.01). Moreover, 1 and 10 µmol/L amygdalin inhibited the mRNA and protein expressions of CD31 in LSECs and increased CD44 expression compared to the model group (P<0.05 or P<0.01). CONCLUSIONS Amygdalin can dramatically alleviate liver fibrosis induced by CCl₄ in mice and inhibit TGF-β/Smad signaling pathway, consequently suppressing HSCs activation and LSECs dedifferentiation to improve angiogenesis.
Rats ; Male ; Mice ; Animals ; Transforming Growth Factor beta/metabolism* ; Amygdalin/therapeutic use* ; Endothelial Cells/metabolism* ; Olive Oil/therapeutic use* ; Rats, Wistar ; Smad Proteins/metabolism* ; Liver Cirrhosis/metabolism* ; Liver ; Transforming Growth Factor beta1/metabolism* ; Signal Transduction ; Collagen Type I/metabolism* ; Carbon Tetrachloride ; Hepatic Stellate Cells

OBJECTIVE: To explore the relationship between occurrence of acute graft-versus-host disease (aGVHD) and various immune cell composition in patients with acute myeloid leukemia (AML) after allogeneic hematopoietic stem cell transplantation (allo-HSCT). METHODS: The clinical data of 104 patients with AML undergoing allo-HSCT in our hospital were retrospectively analyzed, and the hematopoietic reconstitution and occurrence of GVHD were analyzed. Flow cytometry was used to detect the proportion of various types of immune cells in the grafts, the number of graft composition in patients with different degrees of aGVHD was calculated and compared, and to analyze the correlation between the severity of aGVHD in AML patients after allo-HSCT and the immune cell components in the graft. RESULTS: There was no significant difference in the time of hematopoietic reconstitution between the high number group of total number of nucleated cells (TNC) and the low number group, while the time of neutrophil and platelet reconstruction in the high number of CD34 group was significantly faster than that in the low number of CD34 group (P＜0.05), and the total hospital stay also tends to be shorten. Compared with patients in 0-Ι aGVHD group, both HLA-matched and HLA-haploidentical transplantation, the infusion amounts of CD3⁺ cells, CD3⁺CD4⁺ cells, CD3⁺CD8⁺ cells, NK cells and CD14⁺ monocytes were higher in patients of Ⅱ-Ⅳ aGVHD group， but the difference was not statistically significant (P>0.05); In addition, in patients with HLA-haploidentical transplantation, the number of CD4⁺CD25⁺ cells in Ⅱ-Ⅳ aGVHD group was significantly lower than that in 0-Ι aGVHD group (P<0.05), and the same trend was also observed in HLA-matched transplanted patients, but the difference was not significant (P=0.078). CONCLUSION High number of CD34⁺ cells in the graft is beneficial to hematopoietic reconstitution in AML patients. To a certain degree, high number of CD3⁺ cells, CD3⁺CD4⁺ cells, CD3⁺CD8⁺ cells, NK cells and CD14⁺ cells tend to increase the occurrence of aGVHD, but high number of CD4⁺CD25⁺ regulatory T cells is beneficial to reduce the incidence of aGVHD in AML patients.
Humans ; Retrospective Studies ; Hematopoietic Stem Cell Transplantation/adverse effects* ; CD4-Positive T-Lymphocytes ; Leukemia, Myeloid, Acute/complications* ; Graft vs Host Disease

Humans ; RNA, Long Noncoding/genetics* ; MicroRNAs/genetics* ; Cell Line, Tumor ; Inflammation/genetics* ; Apolipoproteins E ; Apoptosis

OBJECTIVE To analyze existing problems of pharmacoeconomic evaluation research in China and to improve the standardization and scientificity of research， so as to provide more high-quality evidence for government decision-making. METHODS Retrieved from CNKI， Wanfang database， VIP， PubMed， Web of Science from 2018 to 2022， the literature related to pharmacoeconomic evaluation in China was collected； Excel 2016 software was used to extract the key information of the included literature which met inclusion criteria. The Quality of Health Economic Studies （QHES） scale was used to evaluate the quality of the included literature. RESULTS A total of 113 pieces of literature were included in this study， involving 85 pieces of Chinese literature and 28 pieces of English literature. The overall score of QHES included literature was 65.7， of which the average score of Chinese literature was 62.0 and English literature was 76.9. The median quality scores for the literature in 2018， 2019， 2020， 2021 and 2022 were 62.0， 70.5， 59.3， 71.0， and 73.0， respectively. Of these， 65 pieces of literature reported the research perspective； 36 reported the discount rate indistinctly； 25 provided unclear definitions of thresholds； and 53 used two sensitivity analysis methods. Among different items of the QHES scale， item 2 （research perspective）， item 8 （time range and discount rate）， item 14 （potential bias） and item 16 （sources of funding） had low percentage of scores. CONCLUSIONS From 2018 to 2022， pharmacoeconomic evaluation literature published by Chinese academics has generally shown a fluctuating upward trend in terms of quality， but there is still some room for improvement. The main problems in current pharmacoeconomics research in China include unclear understanding of the research perspective， single measurement of cost and health outcomes， unreasonable design of time horizon， indistinct description of the threshold or discount rate， and lack of sensitivity analysis.

In dental esthetic rehabilitation, patients pay great attention to the rehabilitative esthetic effect before teeth preparation, and this is also an important content of doctor-patient communication. Along with the development and combined application of intraoral scan, three-dimensional (3D) face scan, digital design, numerical control machining and 3D printing technology, digital technology is gradually applied to the virtual simulated design before irreversible operation in dental esthetic rehabilitation. Digital technology can be used in dentistry to simulate the esthetic outcome in advance, to assist communication among the dentists, patients and dental technicians, and to realize satisfactory outcome in the final restorations precisely, which, as a result, increases the clinical satisfaction. This review focuses on the application of digital virtual simulated design technology in dental esthetic rehabilitation, analyzes the current research development, deficiency and future prospects, so as to provide guidance for clinical diagnosis and treatment.
Computer-Aided Design ; Esthetics, Dental ; Face ; Humans ; Printing, Three-Dimensional ; Tooth Preparation

OBJECTIVE: To evaluate the efficacy of oblique lumbar interbody fusion combined with unilateral pedicle screw fixation via Wiltse approach in the treatment of lumbar spinal stenosis. METHODS: From July 2017 to January 2019, 90 patients with lumbar spinal stenosis, including 38 males and 52 females, aged from 43 to 75 years old with an average of(59.9±8.8) years old, and were treated with oblique lumbar interbody fusion(OLIF) combined with Wiltse unilateral pedicle screw fixation. Surgical decompression and fixation was performed in 50 cases of single segment, 32 cases of double segments and 8 cases of three segments. The distribution of responsible segments included 8 cases of L₂-L₃, 12 cases of L₃-L₄ and 30 cases of L₄-L₅ on single segment, 10 cases of L₂-L₄ and 22 cases of L₃-L₅ on double segments, and 8 cases of L₂-L₅ on three segments. The operation time, blood loss and occurrence of complications were recorded, Visual analogue scale(VAS), Oswestry Disability Index(ODI) and SF-36 scale were used to evaluate clinical efficacy. Lumbar X-ray and MRI were taken at three days after operation, interverterbral space height, intervertebral foraminal height, interverterbral foraminal area, and spinal canal area were measured, and interbody fusion was evaluated according to CT at half a year after operation. RESULTS: All patients were followed up from 12 to 33 months, with an average of (20.2±6.6) months. Mean operation time was (103.3±35.9) min, and mean intraoperative blood loss was (70.4±17.8) ml. VAS of low back pain leg pain, and ODI decreased from 6.2±1.1, 6.1±0.9 and (59.9±4.2)% to 2.7±0.5, 2.5±0.5 and (31.3±8.8)%. SF-36 scale significantly increased from (37.2±3.1) to (54.9±6.1) at the six months postoperation(P<0.05). The intervertebral space height, intervertebral foraminal height, intervertebral foraminal area, and spinal canal area were significantly improved at 3 days after operation(P<0.05). Six months after operation, CT scan showed well fusion in 87 cases, but 3 cases with poor fusion, including 1 case of single segment, 2 cases of multi-segments. The total fusion rate was 96.7% (87/90), the single segment fusion rate was 98.0% (49/50), and the multi-segments fusion rate was 95.0%(38/40). The overall incidence of complications was 17.8%(16/90), including transient iliopsoas muscle weakness in 5 cases (5.6%), endplate fracture in 2 cases (2.2%), peritoneal injury in 1 case (1.1%), postoperative hematoma in 1 case (1.1%), adjacent segment disease in 1 case(1.1%), and fusion cage subsidence in 6 cases (6.7%). Three patients was followed up for recurrent nerve root pain and the symptoms were relieved after revision operation. All complications were relieved or disappeared in varying degrees during the follow-up period, and there were no complications such as cage displacement and screw fracture. CONCLUSION OLIF combined with unilateral pedicle screw fixation via Wiltse approach is effective in treating lumbar spinal stenosis with minimally invasive advantages such as less trauma and less complications. Under the premise of strictly grasping the indications, this method could also achieve satisfactory clinical results in multi-segments oprations.
Male ; Female ; Humans ; Adult ; Middle Aged ; Aged ; Spinal Stenosis/surgery* ; Pedicle Screws ; Spinal Fusion/methods* ; Lumbar Vertebrae/surgery* ; Treatment Outcome ; Low Back Pain