Objective To observe the changes in functional connectivity(FC)of raphe nucleus in patients with first-episode depression complicated with suicidal ideation(SI).Methods Ninety-eight first-episode depression patients were prospectively enrolled and assigned into SI group(n=56)or non SI group(n=42)based on complicated with SI or not,while 47 healthy volunteers were recruited as control group.Resting-state functional MRI was performed.FC between dorsal raphe nucleus(DRN),median raphe nucleus(MRN)and the whole brain were analyzed and compared among 3 groups and between each 2 groups,and the correlations of FC of different brain regions with clinical data of SI group were explored.Results Compared with control group,FC between DRN and left cerebellum and left putamen in SI group and non SI group decreased(all P＜0.05),between MRN and right inferior temporal gyrus increased but between MRN and left inferior frontal gyrus,right superior occipital gyrus,left inferior parietal lobule,left putamen decreased(all P＜0.05).FC between DRN and left putamen in SI group was higher than that in non SI group(P＜0.05).FC between MRN and right central posterior gyrus of SI group increased compared with that in the rest 2 groups(both P＜0.05).FC between MRN and left putamen in SI group was positively correlated with body mass score of Hamilton depression scale-24(HAMD-24)(rs=0.297,P=0.026).Conclusion Abnormal changes of FC between raphe nucleus and cortex,also between raphe nucleus and subcortical area occurred,and FC between MRN and left putamen positively correlated with body mass score of HAMD-24 in patients with first-episode depression complicated with SI.

In the past decades, significant progress has been achived in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method), phase separation method, gas foaming method, freeze-drying method, electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional(3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co-deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviewed 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage). In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

In the past decades, significant progress has been achived in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method), phase separation method, gas foaming method, freeze-drying method, electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional(3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co-deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviewed 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage). In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

The report of the 20th National Congress of the Communist Party of China has made a major deployment to promote the expansion of high-quality medical resources and balanced regional layout, and the construction of national regional medical centers is an important measure to implement the landing. By analyzing the " three co-construction" mode of the National Children′s Regional Medical Center of Henan Children′s Hospital (Beijing Children′s Hospital Zhengzhou Hospital), this paper systematically introduced the internal and external decision-making, management and operation of the regional medical center from four aspects: management, talent, discipline and system. The practice and effectiveness in talent introduction and training, salary distribution, two-way communication, assessment and incentive, discipline construction, technology application, sharing and evaluation of scientific and technological innovation, institutional linkage and integration, as well as the construction of a hierarchical diagnosis and treatment system, were put forward. Suggestions such as construction according to local conditions, strengthening internal coordination, and optimizing external guarantee were put forward, so as to provide practical reference for the in-depth promotion of other national regional medical center construction projects.

Objective : To investigate the epidemiological and clinical characteristics of cases with pertussis in Yiwu City, Zhejiang Province, so as to provide insights into pertussis diagnosis and control. Methods: A total of 186 patients with definitive diagnosis of pertussis in medical institutions in Yiwu City from November 1, 2020 to August 31, 2022 were recruited, and subjects' demographic, clinical symptoms and history of pertussis vaccination were collected using questionnaire surveys. The temporal, population, and spatial distribution and clinical symptoms of pertussis were analyzed using a descriptive epidemiological method, and the clinical characteristics of pertussis patients with different doses of pertussis vaccination were compared. Results: Pertussis was found to predominantly occur during the period between July and November (101 cases, 54.30%), and the three highest-incidence regions included Jiangdong Street, Beiyuan Street and Choujiang Street (87 cases, 46.77%). The 186 pertussis cases included 105 males (56.45%) and 81 females (43.55%), and included 144 cases with age of onset under 7 year (77.42%). Preschool and diaspora children were predominant among all pertussis cases, and the main clinical symptoms included spasmodic cough (97 cases, 52.15%), post-tussive vomiting (82 cases, 44.09%) and aggravated cough at night (77 cases, 41.40%). Routine blood tests measured 119 cases with abnormal white blood cell counts (63.98%), 137 cases with abnormal lymphocyte counts (73.66%), 39 cases with abnormal neutrophil counts (20.97%), 21 cases with abnormal platelet counts (11.29%) and 111 cases with abnormal hemoglobin concentrations (59.68%). There were 55 cases that were unvaccinated (29.57%), 23 cases that were not fully vaccinated (12.37%), and 108 cases that were fully vaccinated (58.06%). There were significant differences among pertussis cases with different doses of vaccination in terms of age, incidence of post-tussive vomiting, percentage of abnormal platelet counts and percentage of hemoglobin concentrations (all P<0.05). Conclusions The majority of pertussis cases are preschool and diaspora children in Yiwu City from November 1, 2020 to August 31, 2022, and the clinical symptoms mainly include spasmodic cough, post-tussive vomiting and aggravated cough at night, with atypical symptoms. The capability for differential diagnosis of pertussis is required to be improved in medical institutions.

In the past decades, great progress has been made in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method ) , phase separation method, gas foaming method, freeze-drying method , electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional (3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviews 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage) . In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4 D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

In the past decades, great progress has been made in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method ) , phase separation method, gas foaming method, freeze-drying method , electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional (3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviews 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage) . In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4 D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

Objective:To explore the mediating effect of self-control between smartphone addiction and academic procrastination in medical undergraduates.Methods:A total of 640 medical college undergraduates were selected by convenient sampling method. The self-designed general information questionnaire, smartphone addiction proneness scale (SAPS), brief self-control scale (BSCS) and procrastination assessment scale-students (PASS) were conducted among the students. SPSS 25.0 was used for descriptive statistical analysis, independent sample t test, one-way ANOVA and Pearson correlation analysis. Results:Correlation analysis showed that PASS scores were positively correlated with SAPS scores ( r=0.29, P<0.01), and negatively corrected with BSCS scores ( r=-0.26, P<0.01); the SAPS scores were negatively corrected with BSCS scores ( r=-0.33, P<0.01). Mediating effect analysis showed that the mediating role of self-control between smartphone addiction and academic procrastination were significant (effect size=0.13, 95%CI=0.03-0.26), and the mediating effect accounted for 38.24%. Conclusion:Self-control played partial mediating effect between smartphone addiction and academic procrastination in medical undergraduates. In order to improve the current situation of medical undergraduate's academic procrastination, medical college educators can intervene from the perspective of smartphone addiction and self-control.

Objective:To investigate the abnormalities of gray matter volume (GMV) and the synergistic changes in different cerebral regions in the first-episode and early-onset depression (EOD) patients.Methods:A total of 60 patients with untreated EOD (EOD group) and 64 healthy controls (control group) matched for age, gender, and education underwent high-resolution T 1WI MR scans. Voxel-based morphometry was used to calculate the cerebral GMV. The difference in GMV between the two groups was compared with the t-test. Different brain regions were selected as seeds for structural covariation network (SCN) analysis. Spearman correlation model was used to analyze the correlation between the GMV in different cerebral regions and illness duration as well as the scores of Hamilton rating scale for depression (HAMD) 17 items in EOD group. Results:Compared to control group, the EOD group had significantly increased GMV in the right orbitofrontal cortex, right dorsolateral prefrontal cortex, right inferior parietal lobule, right superior parietal lobule and bilateral precuneus ( P<0.05, corrected by FDR). Based on the right orbitofrontal cortex and dorsolateral prefrontal cortex as seed regions, structural covariance analysis revealed that abnormal cooperative brain regions in EOD group, mainly distributed in the bilateral frontal lobe, parietal lobe, occipital lobe, temporal lobe, paralimbic system and cerebellum ( P<0.05, corrected by FDR). In EOD group, significant negative correlations were observed between the GMV in the right orbitofrontal cortex ( r=-0.314, P=0.015), the left precuneus ( r=-0.283, P=0.029), and illness duration. Significant positive correlations were observed between the GMV in the right dorsolateral prefrontal cortex and the scores of anxiety/somatization factor of HAMD17 ( r=0.331, P=0.010), the left precuneus and weight factor of HAMD17 ( r=0.255, P=0.049), respectively. Conclusions:Abnormal GMV changes are observed in some regions of the prefrontal and parietal lobule in patients with untreated EOD, accompanied by extensive covariant brain regions and additional structural connectivity. In addition, the abnormal GMV changes in some regions are associated with clinical features. Part of the prefrontal and parietal lobule may be the biomarkers to objectively evaluate abnormal brain structure in depression patients in the early stage.

We present a case of severe COVID-19 in a male newborn. A 22-day infant was transferred to Children's Hospital Affiliated to Zhengzhou University due to "intermittent fever for 18 days". The parents of the infant had been living in Wuhan and returned to Xinyang 9 days before delivery. Suspecting COVID-19 infection, a cesarean section was performed at 38 gestational weeks. The diagnosis of COVID-19 in the mother was confirmed at 2 days postpartum, as well as the father and the grandparents-in-law within 5 days postpartum. The baby developed fever and cough 5 days after birth, and a positive result for the new coronavirus nucleic acid test in the pharyngeal swab was shown 6 days after birth. The fever continued intermittently for 18 days, whilst nasal catheter oxygen inhalation treatment was administered. The percutaneous oxygen saturation decreased to 79% after cessation of oxygen, and the baby was transferred to the hospital for further treatment. After admission, the infant presented with cough, occasional choke, shortness of breath despite nasal catheter oxygen inhalation, increased heart rate, low urine volume, and an enlarged liver 2 cm below the right costal margin. The baby was diagnosed with severe COVID-19 accompanied by anemia, hyperkalemia, pneumonia, and atrial septal defect seen on the echocardiogram. After isolation in an incubator, oxygen inhalation, cardiotonic intervention, blood transfusion and antiviral treatment, the patient made a good recovery, with good breastfeeding, significant resorption of the lung inflammation and no fever or respiratory symptoms. The baby was discharged 14 days after hospitalization, with negative results for nucleic acid test of pharyngeal swab for 2 consecutive times.