ObjectiveTo analyze the epidemiological and clinical characteristics of surveillance cases in a sentinel hospital for pertussis in Jiangxi Province in 2019, and to provide corresponding references for the prevention and control of pertussis. MethodsCase investigation of pertussis was conducted among sentinel hospital surveillance cases, collecting their basic information, epidemiological characteristics, clinical characteristics, and other information. ResultsA total of 125 pertussis surveillance cases were investigated in 2019, including 73 clinically diagnosed cases (58.40%) and 52 confirmed cases (41.60%). The age of onset was mainly concentrated in children under 5 years old (108 cases, 86.40%), with the largest number of cases in infants aged less than 1-year-old (48 cases, 38.40%). Most cases had a history of receiving pertussis vaccine before onset (110 cases, 88.00%), and the intervals between the onset date and the date of last dose of pertussis vaccine in the 1‒2 doses group were significantly shorter than that in the 3‒4 doses group (U=-5.990, P<0.001). Probable household transmission of pertussis was found in 3 cases. All cases had cough symptoms, mainly manifested as whooping cough (77 cases, 61.60%), in addition to other main clinical manifestations, such as fever (76 cases, 60.80%), vomiting (30 cases, 24.00%), conjunctival congestion (27 cases, 21.60%), and inspiratory whoop (16 cases, 12.80%). A total of 73 cases (58.40%) experienced complications, including 1 death case. All the cases had multiple medical visit experiences before this visit, with an interval of 2 (0,3) days between the onset date and the first visit date. The misdiagnosis rate at the first medical visit was 88.00% (110/125), and the misdiagnosis rate of the first visit in secondary and primary hospitals was significantly higher than that in tertiary hospitals, exhibiting a statistically significant difference (χ²=21.582, P<0.001). ConclusionThe clinical symptoms of pertussis cases are often atypical, and the first diagnosis is prone to misdiagnosis, so it’s necessary to further strengthen the early diagnosis capabilities for pertussis cases in healthcare institutions, especially in the primary healthcare institutions.

Objective : To learn the epidemiological characteristics of acute hepatitis B in Jiangxi Province from 2014 to 2021, so as to provide insights into perfecting hepatitis B prevention and control strategy. Methods: Data pertaining to acute hepatitis B was collected through the Chinese Disease Prevention and Control Information System. The temporal, spatial and population distributions of acute hepatitis B were analyzed using a descriptive epidemiological method. The trend in incidence of acute hepatitis B was analyzed using annual percent change (APC). Results: Totally 8 890 cases of acute hepatitis B were reported in Jiangxi Province from 2014 to 2021, with the reported incidence showing a tendency towards a decline (APC=-11.730%, P<0.05). The average annual reported incidence rate of acute hepatitis B was 2.42/105. Acute hepatitis B occurred all the year round, without obvious seasonal characteristics. The top three highest incidence rates were reported in Pingxiang City (7.12/105), Ganzhou City (3.12/105) and Fuzhou City (2.87/105). The lowest and highest incidence rates of acute hepatitis B were seen among residents aged under 10 years (0.30/105) and 20-29 years (3.86/105). The incidence rate of males was higher than that of females (3.25/105 vs. 1.55/105, P<0.05). Farmers were predominant population affected acute hepatitis B (5 764 cases, 64.84%). Conclusions The incidence of acute hepatitis B showed a downward trend in Jiangxi Province from 2014 to 2021, and the disease predominantly affected young males, farmers. Health education should be strengthened, and hepatitis B vaccination coverage should be promoted.

Objective:To analyze the epidemic characteristics of mumps in people aged 0-14 years in Jiangxi Province and the vaccination situation of mumps-containing vaccines (including mumps vaccines) from 2015 to 2022 to provide a scientific basis for the prevention and control of mumps epidemic in Jiangxi Province.Methods:The mumps epidemic situation and mumps vaccination data in Jiangxi Province from 2015 to 2022 were obtained from Chinese Disease Prevention and Control Information System and Jiangxi Immunization Program Information System and were analyzed using descriptive epidemiological methods. The chi-square test, cluster analysis, and Cochran-Armitage trend test were used for statistical analysis.Results:From 2015 to 2022, a total of 40 734 cases of mumps were reported in people aged 0-14 in Jiangxi Province, with an annual average reported incidence rate of 53.69/100 000, and the peak of incidence occurred in aged 6-7 years group, and the reported incidence rate was 86.43/100 000. The high incidence seasons in 2015-2019 were summer and winter, and there was no significant high incidence season in 2020-2022. Mumps outbreaks mainly occurred in Shangrao, Ganzhou, and Ji'an, and the outbreak sites were mainly reported primary schools. From 2015 to 2019, the 1-year group was the primary age group for vaccination against mumps, while from 2020 to 2021, it was 0 and 1-year groups.Conclusions:From 2015 to 2022, the incidence of mumps in the population aged 0-14 in Jiangxi Province showed a downward trend, and the peak of incidence occurred in age group 6-7 years. It is suggested to continue to strengthen the coverage rate of 2 doses of mumps vaccination for school-age children and, simultaneously, strengthen the monitoring and prevention of mumps in key places to avoid outbreaks.

Objective:To analyze the methylation characteristics of the lymphocyte-specific protein-tyrosine kinase (LCK) promoter region in the peripheral blood circulation of rheumatoid arthritis (RA) patients and its correlation with clinical indicators.Methods:Targeted methylation sequencing was used to compare the methylation levels of 7 CpG sites in the LCK promoter region in the peripheral blood of RA patients with healthy controls (HC) and osteoarthritis (OA) patients. Correlation analysis and ROC curve construction were performed with clinical information.Results:Non-parametric tests revealed that compared with HC [0.53(0.50, 0.57)] and OA patients [0.59(0.54, 0.62), H=47.17, P<0.001], RA patients [0.63(0.59, 0.68)] exhibited an overall increase in methylation levels. Simultaneously, when compared with the HC group [0.38(0.35, 0.41), 0.59(0.55, 0.63), 0.60(0.55, 0.64), 0.59(0.55, 0.63), 0.58(0.53, 0.62), 0.45(0.43, 0.49), 0.57(0.54, 0.61)], the RA group [0.46(0.42, 0.49), 0.70(0.65, 0.75), 0.70(0.66, 0.76), 0.70(0.65, 0.75), 0.69(0.64, 0.74), 0.55(0.51, 0.59), 0.68(0.63, 0.73)] showed a significant elevation in methylation levels at CpG sites cg05350315_60, cg05350315_80, cg05350315_95, cg05350315_101, cg05350315_104, cg05350315_128, and cg05350315_142, with statistically significant differences ( Z=-5.63, -5.89, -5.91, -5.89, -5.98, -5.95, -5.95, all P<0.001). Compared with the OA group [0.65(0.59, 0.69), 0.65(0.60, 0.69), 0.64(0.58, 0.68), 0.50(0.45, 0.54), 0.63(0.58, 0.67)], the RA group [0.70(0.66, 0.76), 0.70(0.65, 0.75), 0.69(0.64, 0.74), 0.55(0.51, 0.59), 0.68(0.63, 0.73)] exhibited a significant increase in methylation levels at CpG sites cg05350315_95, cg05350315_101, cg05350315_104, cg05350315_128, and cg05350315_142, with statistically significant differences ( Z=-3.56, -3.52, -3.60, -3.67, -3.62; P=0.036, 0.042, 0.031, 0.030, 0.030). Furthermore, Pearson correlation coefficient analysis revealed a positive correlation between the overall methylation level in this region and C-reactive protein (CRP) ( r=0.19, P=0.004) and erythrocyte sedimentation rate ( r=0.14, P=0.035). The overall methylation level of the LCK promoter region in the CRP (low) group [0.63 (0.58, 0.68)] was higher than that in the CRP (high) group [0.65(0.61, 0.70)], with statistically significant differences ( Z=2.60, P=0.009). Finally, by constru-cting a ROC curve, the discriminatory efficacy of peripheral blood LCK promoter region methylation levels for identifying RA patients, especially seronegative RA patients, from HC and OA groups was validated, with an AUC value of 0.78 (95% CI: 0.63, 0.93). Conclusion:This study provides insights into the methylation status and methylation haplotype patterns of the LCK promoter region in the peripheral blood of RA patients. The overall methylation level in this region is positively correlated with the level of inflammation and can be used to differentiate seronegative RA patients from the HC and OA patients.

Objective: To evaluate the safety of free bivalent human papilloma virus (HPV) vaccine for junior middle school girls in Jiangxi Province, so as to provide the reference for HPV vaccination. Methods: The number of free inoculation of bivalent HPV vaccine for junior middle school girls in Jiangxi Province from August 1, 2023 to May 31, 2024 were collected by Jiangxi Provincial Immunization Planning Information System, and the cases of adverse events following immunization (AEFI) were collected by China Disease Prevention and Control Information System. A descriptive analysis was conducted to assess the incidence of AEFI among middle school girls who received free bivalent HPV vaccine. Results: Junior middle school girls in Jiangxi Province were vaccinated with free bivalent HPV vaccine for 1 061 023 doses, and 67 cases of AEFI were reported. Among the 67 cases, there were 50 cases of general reaction, 7 cases of abnormal reaction, 8 cases of psychogenic reaction and 2 cases of coupling syndrome. The reported incidence of AEFI, adverse reactions and psychogenic reactions were 6.31/100 000, 5.37/100 000 and 0.75/100 000 respectively. Adverse reactions were primarily general reactions (87.72%), with abnormal reactions counting for 12.28%. All AEFI cases were cured or improved, and no death or disability cases were reported. Conclusion The free vaccination of bivalent HPV for junior high school girls in Jiangxi Province is identified as highly safe, low adverse reaction reporting rate, and mainly general reactions, but attention should be paid to the prevention of psychogenic reactions in adolescents.

Objective:To learn about the genotyping of human Brucella isolated from Sichuan Province. Methods:BCSP31-PCR and AMOS-PCR were used to identify the genus and biotype of the 66 strains isolated from confirmed human brucellosis cases in Sichuan Province from 2014 to 2020, respectively. The isolated strains were genotyped by multi-locus sequence typing (MLST)-9. The sequence type (ST) was compared trough the online MLST database. A minimum spanning tree (MST) was constructed to cluster the newly discovered and known ST using the BioNumerics software version 7.6.Results:The 66 strains isolated from human cases of brucellosis in Sichuan Province from 2014 to 2020 were Brucella, and 65 of them were Brucella melitensis while one strain was Brucella abortus. The MLST method identified three known STs (ST-8, ST-39 and ST-2) and one newly type (ST-101). Among them, ST-8 was the main ST in Sichuan Province (90.91%, 60/66), another 4 strains of Brucella melitensis were ST-39, and 1 strain of Brucella abortus was ST-2. The newly type ST-101 was isolated from Leshan City in 2019, belonging to the Brucella melitensis and closely related to the evolution of ST-8. Conclusion:Brucella melitensis is the main epidemic Brucella strain in Sichuan Province, ST-8 is predominant genotype, with a small amount of ST-39, ST-101 and ST-2.

Objective:To predict and analyze the incidence trend of mumps using the Autoregressive integrated moving average model (ARIMA) in Jiangxi Province.Methods:The ARIMA was used to model the number of mumps cases per month from 2015 to 2019 in Jiangxi Province. The number of mumps cases in 12 months was predicted and was compared with the actual reported cases in 2020, 2021, and 2022, respectively.Results:The optimal model was ARIMA (0,2,1)(1,2,0) 12. The predicted number of cases was significantly higher than that reported in 2020, 2021 and 2022. The number of reported cases of mumps in 2020, 2021, and 2022 decreased by 54.02%, 63.40%, and 66.09% compared with the forecast. Conclusions:From 2020 to 2022, the reported incidence of mumps in Jiangxi Province was significantly lower than the predicted incidence. Considering that it was related to non-drug intervention measures and changes in immunization strategies, it was suggested to strengthen mumps surveillance further to better cope with the epidemic situation of mumps.

Enterotoxigenic Escherichia coli（ETEC）infection can induce watery diarrhea，leading to dehydration，electrolyte disturbance，and even death in severe cases. Recombinant B subunit/inactivated whole-cell cholera（rBS/WC）vaccine is effective in preventing ETEC infectious diarrhea. On the basis of the latest evidence on etiology and epidemiology of ETEC，as well as the effectiveness，safety，and health economics of rBS/WC vaccine，National Clinical Research Center for Child Health（The Children’s Hospital，Zhejiang University School of Medicine）and Zhejiang Provincial Center for Disease Control and Prevention invited experts to develop expert consensus on rBS/WC vaccine in prevention of ETEC infectious diarrhea. It aims to provide the clinicians and vaccination professionals with guidelines on using rBS/WC vaccine to reduce the incidence of ETEC infectious diarrhea.

Objective:To study the application of three-dimensional(3D) printed individualized tray in impression taken of presurgical nasoalveolar molding(PNAM) for newborn with cleft and palate.Methods:The newborns with unilateral/bilateral cleft lip and palate treated with PNAM during 2015 to 2020 in School and Hospital of Stomatology, China Medical University, were chosen. Their clinical materials were retrospectively analyzed. Maxillary impressions taken by 3D printed individualized trays were compared with those taken by modified traditional tray. The indexes were evaluated including the numbers of defects (bubbles with diameter>1 mm and exposure of tray) in each impression; the impression quality grade (perfect 1, good 2, qualified 3 and unqualified 4), and the integrity and legibility of impressions [evaluated by 3 orthodontists using visual analog scale(VAS)]. The date was analyzed by SPSS 23.0. Rank-sum test was used for comparison between groups.Results:A total of 22 patients were included. There were 7 patients (3 males, 4 females, 3-28 days old) in modified traditional tray group and 15 patients (10 males, 5 females, 4-26 days old) in 3D printed individualized trays group. All patients finished the PNAM treatment before repairment of cleft lip. The average treatment duration were 136 days with 131 days in modified traditional tray group and 137 days in 3D printed individualized trays group. (1) The impressions made by conventional method had more defects [6(5, 7)] than those made by 3D printed individualized trays[2(1, 2)]( P<0.05). (2)The impression taken by modified traditional tray was mainly qualified[3(2, 3)scores] and that taken by 3D printed individualized tray exhibited higher grade [good, 2(2, 2) scores]( P<0.01). (3) Compared with modified traditional tray group, the scores of VAS on integrity of impression taken by 3D printed individualized tray were significantly high( P<0.05). Itemized evaluation showed that the integrity scores on all positions except vestibular sulcus had significant difference between groups( P<0.05 or P<0.01). The scores of VAS on legibility of impression taken by 3D printed individualized tray were significantly higher than those taken by modified traditional tray( P<0.05). As for itemized evaluation, legibility scores on all positions except upper frenum had significant difference between groups( P<0.05 or P<0.01). Conclusions:The impression taken by 3D printing individualized tray has higher quality, integrity and legibility.

Objective:To study the application of three-dimensional(3D) printed individualized tray in impression taken of presurgical nasoalveolar molding(PNAM) for newborn with cleft and palate.Methods:The newborns with unilateral/bilateral cleft lip and palate treated with PNAM during 2015 to 2020 in School and Hospital of Stomatology, China Medical University, were chosen. Their clinical materials were retrospectively analyzed. Maxillary impressions taken by 3D printed individualized trays were compared with those taken by modified traditional tray. The indexes were evaluated including the numbers of defects (bubbles with diameter>1 mm and exposure of tray) in each impression; the impression quality grade (perfect 1, good 2, qualified 3 and unqualified 4), and the integrity and legibility of impressions [evaluated by 3 orthodontists using visual analog scale(VAS)]. The date was analyzed by SPSS 23.0. Rank-sum test was used for comparison between groups.Results:A total of 22 patients were included. There were 7 patients (3 males, 4 females, 3-28 days old) in modified traditional tray group and 15 patients (10 males, 5 females, 4-26 days old) in 3D printed individualized trays group. All patients finished the PNAM treatment before repairment of cleft lip. The average treatment duration were 136 days with 131 days in modified traditional tray group and 137 days in 3D printed individualized trays group. (1) The impressions made by conventional method had more defects [6(5, 7)] than those made by 3D printed individualized trays[2(1, 2)]( P<0.05). (2)The impression taken by modified traditional tray was mainly qualified[3(2, 3)scores] and that taken by 3D printed individualized tray exhibited higher grade [good, 2(2, 2) scores]( P<0.01). (3) Compared with modified traditional tray group, the scores of VAS on integrity of impression taken by 3D printed individualized tray were significantly high( P<0.05). Itemized evaluation showed that the integrity scores on all positions except vestibular sulcus had significant difference between groups( P<0.05 or P<0.01). The scores of VAS on legibility of impression taken by 3D printed individualized tray were significantly higher than those taken by modified traditional tray( P<0.05). As for itemized evaluation, legibility scores on all positions except upper frenum had significant difference between groups( P<0.05 or P<0.01). Conclusions:The impression taken by 3D printing individualized tray has higher quality, integrity and legibility.