ObjectiveTo investigate the value of different noninvasive diagnostic models in the diagnosis of esophageal and gastric varices since there is a high risk of esophageal and gastric varices in patients with compensated hepatitis B cirrhosis and significant portal hypertension， and to provide a basis for the early diagnosis of esophageal and gastric varices. MethodsA total of 108 patients with significant portal hypertension due to compensated hepatitis B cirrhosis who attended Guangdong Provincial Hospital of Traditional Chinese Medicine from November 2017 to November 2023 were enrolled， and according to the presence or absence of esophageal and gastric varices under gastroscopy， they were divided into esophageal and gastric varices group （GOV group） and non-esophageal and gastric varices group （NGOV group）. Related data were collected， including age， sex， imaging findings， and laboratory markers. The chi-square test was used for comparison of categorical data between groups； the least significant difference t-test was used for comparison of normally distributed continuous data between groups， and the Mann-Whitney U test was used for comparison of non-normally distributed continuous data between groups. The receiver operating characteristic （ROC） curve was plotted to evaluate the diagnostic value of five scoring models， i.e.， fibrosis-4 （FIB-4）， LOK index， LPRI， aspartate aminotransferase-to-platelet ratio index （APRI）， and aspartate aminotransferase/alanine aminotransferase ratio （AAR）. The binary logistic regression method was used to establish a combined model， and the area under the ROC curve （AUC） was compared between the combined model and each scoring model used alone. The Delong test was used to compare the AUC value between any two noninvasive diagnostic models. ResultsThere were 55 patients in the GOV group and 53 patients in the NGOV group. Compared with the NGOV group， the GOV group had a significantly higher age （52.64±1.44 years vs 47.96±1.68 years， t=0.453， P<0.05） and significantly lower levels of alanine aminotransferase ［42.00 （24.00 — 17.00） U/L vs 82.00 （46.00 — 271.00） U/L， Z=-3.065， P<0.05］， aspartate aminotransferase ［44.00 （32.00 — 96.00） U/L vs 62.00 （42.50 — 154.50） U/L，Z=-2.351， P<0.05］， and platelet count ［100.00 （69.00 — 120.00）×10⁹/L vs 119.00 （108.50 — 140.50）×10⁹/L， Z=-3.667， P<0.05］. The ROC curve analysis showed that FIB-4， LOK index， LPRI， and AAR used alone had an accuracy of 0.667， 0.681， 0.730， and 0.639， respectively， in the diagnosis of esophageal and gastric varices （all P<0.05）， and the positive diagnostic rates of GOV were 69.97%， 65.28%， 67.33%， and 58.86%， respectively， with no significant differences in AUC values （all P>0.05）， while APRI used alone had no diagnostic value （P>0.05）. A combined model （LAF） was established based on the binary logistic regression analysis and had an AUC of 0.805 and a positive diagnostic rate of GOV of 75.80%， with a significantly higher AUC than FIB-4， LOK index， LPRI， and AAR used alone （Z=-2.773，-2.479，-2.206， and-2.672， all P<0.05）. ConclusionFIB-4， LOK index， LPRI， and AAR have a similar diagnostic value for esophageal and gastric varices in patients with compensated hepatitis B cirrhosis and significant portal hypertension， and APRI alone has no diagnostic value. The combined model LAF had the best diagnostic efficacy， which provides a certain reference for clinical promotion and application.

With the widespread use of antibiotics, drug-resistant bacterial infections have become a significant threat to human health. Finding new antibacterial strategies that can effectively control drug-resistant bacterial infections has become an urgent task. Unlike small molecule drugs that target bacterial proteins, antisense oligonucleotide (ASO) can target genes related to bacterial resistance, pathogenesis, growth, reproduction and biofilm formation. By regulating the expression of these genes, ASO can inhibit or kill bacteria, providing a novel approach for the development of antibacterial drugs. To overcome the challenge of delivering antisense oligonucleotide into bacterial cells, various drug delivery systems have been applied in this field, including cell-penetrating peptides, lipid nanoparticles and inorganic nanoparticles, which have injected new momentum into the development of antisense oligonucleotide in the antibacterial realm. This review summarizes the current development of small nucleic acid drugs, the antibacterial mechanisms, targets, sequences and delivery vectors of antisense oligonucleotide, providing a reference for the research and development of antisense oligonucleotide in the treatment of bacterial infections.

Objective: To explore the impact of household tobacco smoke exposure on adolescents attempted smoking behavior, so as to provide a reference for tobacco control policy formulation and evaluation. Methods: From September to November 2023, a stratified cluster random sampling method was employed to select 7 841 middle and high school students from 10 monitoring sites (districts/counties) in Beijing for a questionnaire survey. Rao-Scott Chi square test was used to assess differences in proportions across subgroups, and complex sampling design based multivariate Logistic regression analysis was conducted to explore the influence of parental smoking and secondhand smoke (SHS) exposure at home on adolescents attempted smoking behavior. Results: About 47.17% of adolescents reported to have at least one parent smoked, with 42.36% reported of having only the father smoked, 0.73% reported of having only the mother smoked, and 4.08% reported of having both parents smoked. About 34.66% of middle and high school students were reported SHS exposure at home in the past 7 days, with 10.98%, 4.79% and 18.89% reported SHS exposure for 1-2, 3-4 and 5-7 days. Compared to adolescents with non smoking parents, those with a smoking father or both smoking parents had higher rates of attempted smoking [ OR (95% CI )=1.45(1.06-1.98), 3.73(2.18-6.37), P < 0.05 ]. Compared to adolescents without SHS exposure at home in the past 7 days, those exposed for 3-4 or 5- 7 days had higher rates of attempted smoking [ OR (95% CI )=2.21(1.27- 3.84 ), 2.46(1.58-3.83), P <0.01]. Conclusions Household tobacco smoke exposure is associated with adolescent attempted smoking behavior. Parents should quit smoking and prohibit smoking at home to create a smoke free environment for adolescents.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

BACKGROUND:The reasonable implantation range of femoral prosthesis in unicompartmental knee arthroplasty in patients with osteoporosis has not been investigated,and previous studies have often been based on unicompartmental knee arthroplasty models in normal bone,with fewer mechanical studies in models with non-normal bone.Complications after unicompartmental knee arthroplasty have been shown to be highly associated with osteoporosis. OBJECTIVE:To analyze the biomechanical effects of the coronal inclination of the Sled fixed platform femoral prosthesis on unicompartmental knee arthroplasty in patients with osteoporosis and to find the correlation between osteoporosis and mid-and long-term complications after unicompartmental knee arthroplasty. METHODS:Based on the digital imaging technology to obtain the data of the knee joint and prosthesis,a normal bone knee model is then created by using specialized software such as Mimics and Geomagic studio.Based on a validated normal bone knee model,an osteoporotic knee model was created by changing the material parameters.Totally 14 unicompartmental knee arthroplasty finite element models were created using Sled fixed platform femoral prosthesis:standard position(0°),varus and valgus angles:3°,6°,9° in the normal bone and osteoporosis groups.Stress changes on the surface of polyethylene liner,cancellous bone under tibial prosthesis,and cortical bone were calculated and analyzed in all unicompartmental knee arthroplasty models. RESULTS AND CONCLUSION:(1)In the osteoporotic models,the high stress values of the polyethylene liner surface and the cancellous bone under the tibial prosthesis increased with the increase of the tilt angle of the femoral prosthesis,and the high stress values of the cortical bone surface under the tibial prosthesis increased with the increase of the prosthesis valgus angles and decreased with the increase of the varus angles.(2)For the polyethylene liner surface as well as the subcortical bone surface of the tibial prosthesis,the high stress values of the models for each inclination angle in the osteoporosis group were greater than those of the corresponding models in the normal bone group.For the surface of the cancellous bone under the tibial prosthesis,the high stress values of the tilt angle models of the osteoporosis groups were smaller than those of the normal bone groups.(3)Osteoporosis may cause biomechanical abnormalities in the internal structures of the knee after unicondylar replacement,increasing the potential risk of postoperative aseptic loosening of the prosthesis and periprosthetic fractures.Varus and valgus of the femoral prosthesis in the coronal plane should be avoided as much as possible when performing medial unicompartmental knee arthroplasty with a Sled fixation platform in osteoporotic knees.

ObjectiveThis study aims to investigate the dynamic changes in general body parameters, blood glucose, and blood lipid profiles in obese cynomolgus monkeys, exploring the correlations among these parameters and providing a reference for research on the obese cynomolgus monkey model. Methods30 normal male cynomolgus monkeys aged 5 - 17 years old (with body mass index < 35 kg/m² and glycated hemoglobin content < 4.50%) and 99 spontaneously obese male cynomolgus monkeys (with body mass index ≥35 kg/m² and glycated hemoglobin content < 4.50%) were selected. Over a period of three years, their abdominal circumference, skinfold thickness, body weight, body mass index, fasting blood glucose, glycated hemoglobin, and four blood lipid indicators were monitored. The correlations between each indicator were analyzed using repeated measurement ANOVA, simple linear regression, and multiple linear regression correlation analysis method. Results Compared to the control group, the obese group exhibited significantly higher levels of abdominal circumference, skinfold thickness, body weight, body mass index, and triglyceride (P＜0.05). In the control group, skinfold thickness increased annually, while other indicators remained stable. Compared with the first year, the obese group showed significantly increased abdominal circumference, skinfold thickness, body weight, body mass index, triglyceride, and fasting blood glucose in the second year(P＜0.05), with this increasing trend persisting in the third year (P＜0.05). In the control group, the obesity incidence rates in the second and third years were 16.67% and 23.33%, respectively, while the prevalence of diabetes remained at 16.67%. In the obese group, the diabetes incidence rates were 29.29% and 44.44% in years 2 and 3, respectively. Among the 11-13 year age group, the incidence rates were 36.36% and 44.68%, while for the group older than 13 years, the rates were 28.13% and 51.35%. Correlation analysis revealed significant associations (P＜0.05) between fasting blood glucose and age, abdominal circumference, skinfold thickness, body weight, and triglyceride in the diabetic monkeys. Conclusion Long-term obesity can lead to the increases in general physical indicators and fasting blood glucose levels in cynomolgus monkeys, and an increase in the incidence of diabetes. In diabetic cynomolgus monkeys caused by obesity, there is a high correlation between their fasting blood glucose and age, weight, abdominal circumference, skinfold thickness, and triglyceride levels, which is of some significance for predicting the occurrence of spontaneous diabetes.

ObjectiveTo establish fingerprint profiles and a quantitative determination method for Lycii Cortex， providing a scientific basis for the formulation of quality standards for Lycii Cortex and its roasted products. MethodsHigh performance liquid chromatography（HPLC） was developed for the quantitative method for determining kukoamine B in Lycii Cortex and its roasted products on an Alphasil XD-C₁₈ CH column（4.6 mm×250 mm， 5 μm）. HPLC fingerprint profiles were established for 10 batches of Lycii Cortex and its roasted products， and ultra-performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS） was used to identify the common peaks based on reference standards， literature and MS information. Quality evaluation indicators included yield of decoction pieces， appearance properties， content of kukoamine B， and fingerprint profiles. The temperature and time of the roasting process were investigated to select the optimal preparation process， which was then verified. Additionally， chemical pattern recognition was combined to assess the differences in the chemical composition of Lycii Cortex before and after roasting， as well as among samples from different origins. ResultsQuantitative analysis indicated that the contents of kukoamine B in Lycii Cortex and its roasted products were 0.35%-5.51% and 0.24%-4.15%， respectively. The transfer rate of kukoamine B was 58.6%-78.9% after roasting. The fingerprint profile analysis demonstrated that the method established in this study effectively separated kukoamine B from other components in the samples and distinctly differentiated it from its impurity peak， cis-N-caffeoylputrescine. The HPLC fingerprint profiles of Lycii Cortex and its roasted products showed high similarity（all above 0.95）， with 7 common peaks identified and five common components， including kukoamine B， cis-N-caffeoylputrescine， N-coumaroyl tyramine， feruloyltyramine， and glucosyringic acid， confirmed. Process optimization confirmed that baking at 110 ℃ for 20 min was a stable and feasible method for roasting Lycii Cortex. Principal component analysis and cluster analysis showed that there was little difference in the chemical composition between raw and roasted Lycii Cortex， but the quality of Lycii Cortex from different origins differed greatly. ConclusionThis study successfully established the fingerprint profiles and a quantitative method for the effective component kukoamine B in Lycii Cortex and roasted Lycii Cortex. The qualitative and quantitative analyses clarified that the impact of the roasting process on the chemical composition of Lycii Cortex was less significant than the variations due to its geographical origin. The findings of this study offer a reference for the development of quality evaluation methods and the establishment of quality standards for Lycii Cortex and its processed products.

Guided by the concept of quality by design(QbD), this study optimizes the calcination and quenching process of calcined Magnetitum and establishes the XRD characteristic spectra of calcined Magnetitum, providing a scientific basis for the formulation of quality standards. Based on the processing methods and quality requirements of Magnetitum in the Chinese Pharmacopoeia, the critical process parameters(CPPs) identified were calcination temperature, calcination time, particle size, laying thickness, and the number of vinegar quenching cycles. The critical quality attributes(CQAs) included Fe mass fraction, Fe~(2+) dissolution, and surface color. The weight coefficients were determined by combining Analytic Hierarchy Process(AHP) and the criteria importance though intercrieria correlation(CRITIC) method, and the calcination process was optimized using orthogonal experimentation. Surface color was selected as a CQA, and based on the principle of color value, the surface color of calcined Magnetitum was objectively quantified. The vinegar quenching process was then optimized to determine the best processing conditions. X-ray diffraction(XRD) was used to establish the characteristic spectra of calcined Magnetitum, and methods such as similarity evaluation, cluster analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to evaluate the quality of the spectra. The optimized calcined Magnetitum preparation process was found to be calcination at 750 ℃ for 1 h, with a laying thickness of 4 cm, a particle size of 0.4-0.8 cm, and one vinegar quenching cycle(Magnetitum-vinegar ratio 10∶3), which was stable and feasible. The XRD characteristic spectra analysis method, featuring 9 common peaks as fingerprint information, was established. The average correlation coefficient ranged from 0.839 5-0.988 1, and the average angle cosine ranged from 0.914 4 to 0.995 6, indicating good similarity. Cluster analysis results showed that Magnetitum and calcined Magnetitum could be grouped together, with similar compositions. OPLS-DA discriminant analysis identified three key characteristic peaks, with Fe_2O_3 being the distinguishing component between the two. The final optimized processing method is stable and feasible, and the XRD characteristic spectra of calcined Magnetitum was initially established, providing a reference for subsequent quality control and the formulation of quality standards for calcined Magnetitum.
X-Ray Diffraction/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Particle Size

Notum, a negative feedback regulator of the Wnt signaling, has emerged as a promising target for treating glucocorticoid-induced osteoporosis (GIOP). This study showcases an efficient strategy for discovering the anti-Notum constituents from herbal medicines (HMs) as novel anti-GIOP agents. Firstly, a rapid-responding near-infrared fluorogenic substrate for Notum was rationally engineered for high-throughput identifying the anti-Notum HMs. The results showed that Bu-Gu-Zhi (BGZ), a known anti-osteoporosis herb, potently inhibited Notum in a competitive-inhibition manner. To uncover the key anti-Notum constituents in BGZ, an efficient strategy was adapted via integrating biochemical, phytochemical, computational, and pharmacological assays. Among all identified BGZ constituents, three furanocoumarins were validated as strong Notum inhibitors, while 5-methoxypsoralen (5-MP) showed the most potent anti-Notum activity and favorable safety profiles. Mechanistically, 5-MP acted as a competitive inhibitor of Notum via creating strong hydrophobic interactions with Trp128 and Phe268 in the catalytic cavity of Notum. Cellular assays showed that 5-MP remarkably promoted osteoblast differentiation and activated Wnt signaling in dexamethasone (DXMS)-challenged MC3T3-E1 osteoblasts. In dexamethasone-induced osteoporotic mice, 5-MP strongly elevated bone mineral density (BMD) and improved cancellous and cortical bone thickness. Collectively, this study constructs a high-efficient platform for discovering key anti-Notum constituents from HMs, while 5-MP emerges as a promising anti-GIOP agent.