Objective:To establish a method for the determination of 2, 3-Butanedione (BUT) in the air of workplace, which including the process of collection by absorption in phosphoric acid aqueous solution and the process of analysis and detection by high performance liquid chromatography with derivatization.Methods:In October 2022, a porous glass plate absorption tube containing 10 ml of 0.01% phosphoric acid solution was used to collect BUT in the air of the workplace at a flow rate of 0.2 L/min. The absorption solution was derived by 2, 4-dinitrophenylhydrazine for 75 min and separated on a SB-C18 column (250 mm×4.6 mm, 5 μm) . At the column temperature of 30 ℃, the mixture of acetonitrile-water ( V∶ V, 1∶1) was eluted at the flow rate of 1.0 ml/min. It was detected by UV detector (λ=365 nm) , qualitatived by retention time and quantitatived by external standard. Results:It showed that BUT in phosphoric acid aqueous solution could be stored for at least 7 d at 4 ℃. There was a linear relationship within the determination range of 0.05-6.00 μg/ml, the linear regression equation was y=89.610 x+0.133, r=0.9999. The sampling absorption efficiencies were 98.33%-100.00%, the detection limit of the method was 0.005 μg/ml, the minimum detection concentration was 0.016 mg/m 3 (based on V0=3.0 L) . The recovery rates were 95.96%-102.44%, the intra batch precision were 4.36%-7.78%, and the inter batch precision were 4.96%-6.06%. Conclusion:The method has the advantages of simple operation, high sensitivity and good accuracy. It can prevent the loss and degradation of BUT. It can be used for the determination of BUT in the air of workplace.

Objective To observe the efficacy and safety of Morinda officinalis oligosaccharides in the continuation treatment of mild and moderate depression.Methods An open,single-arm,multi-center design was adopted in our study.Adult patients with mild and moderate depression who had received acute treatment of Morinda officinalis oligosaccharides were enrolled and continue to receive Morinda officinalis oligosaccharides capsules for 24 weeks,the dose remained unchanged during continuation treatment.The remission rate,recurrence rate,recurrence time,and the change from baseline to endpoint of Hamilton Depression Scale(HAMD),Hamilton Anxiety Scale(HAMA),Clinical Global Impression-Severity(CGI-S)and Arizona Sexual Experience Scale(ASEX)were evaluated.The incidence of treatment-related adverse events was reported.Results The scores of HAMD-17 at baseline and after treatment were 6.60±1.87 and 5.85±4.18,scores of HAMA were 6.36±3.02 and 4.93±3.09,scores of CGI-S were 1.49±0.56 and 1.29±0.81,scores of ASEX were 15.92±4.72 and 15.57±5.26,with significant difference(P＜0.05).After continuation treatment,the remission rate was 54.59％(202 cases/370 cases),and the recurrence rate was 6.49％(24 cases/370 cases),the recurrence time was(64.67±42.47)days.The incidence of treatment-related adverse events was 15.35％(64 cases/417 cases).Conclusion Morinda officinalis oligosaccharides capsules can be effectively used for the continuation treatment of mild and moderate depression,and are well tolerated and safe.

Objective:To establish a method for the determination of 2, 3-Butanedione (BUT) in the air of workplace, which including the process of collection by absorption in phosphoric acid aqueous solution and the process of analysis and detection by high performance liquid chromatography with derivatization.Methods:In October 2022, a porous glass plate absorption tube containing 10 ml of 0.01% phosphoric acid solution was used to collect BUT in the air of the workplace at a flow rate of 0.2 L/min. The absorption solution was derived by 2, 4-dinitrophenylhydrazine for 75 min and separated on a SB-C18 column (250 mm×4.6 mm, 5 μm) . At the column temperature of 30 ℃, the mixture of acetonitrile-water ( V∶ V, 1∶1) was eluted at the flow rate of 1.0 ml/min. It was detected by UV detector (λ=365 nm) , qualitatived by retention time and quantitatived by external standard. Results:It showed that BUT in phosphoric acid aqueous solution could be stored for at least 7 d at 4 ℃. There was a linear relationship within the determination range of 0.05-6.00 μg/ml, the linear regression equation was y=89.610 x+0.133, r=0.9999. The sampling absorption efficiencies were 98.33%-100.00%, the detection limit of the method was 0.005 μg/ml, the minimum detection concentration was 0.016 mg/m 3 (based on V0=3.0 L) . The recovery rates were 95.96%-102.44%, the intra batch precision were 4.36%-7.78%, and the inter batch precision were 4.96%-6.06%. Conclusion:The method has the advantages of simple operation, high sensitivity and good accuracy. It can prevent the loss and degradation of BUT. It can be used for the determination of BUT in the air of workplace.

Objective To investigate the impacts of different levels(1,3 and 5)of iDream reconstruction on CT quantitative analysis of lung function parameters,providing references for quantitative measurement of emphysema indicators by iDream reconstruction technology.Methods A retrospective study was performed for 50 patients who underwent noncontrast chest CT scan in some hospital from December 2021 to January 2022,and the images were reconstructed using four methods:fittered back projection(FBP)and level 1,3 and 5 iDream techniques.For the four groups of images,the main tracheal CT values and standard deviation(SD)values were measured,the signal to noise ratio(SNR)was calculated and the total lung volume(TLV),emphysema volume(EV),emphysema index(EI),15th percentile of lung attenuation(Perc 15)and pulmonary density 15％(PD15％)were detected with quantitative lung function analysis software.Statistical analysis was performed using SPSS 24.0 software.Results The four groups did not have significant differences in the main tracheal CT value and TLV(P＞0.05),while did in SD,SNR,EV,EI,PD15％and Perc 15(P＜0.05).As the reconstruction level of iDream increased,the main tracheal SD value,EV and EI decreased gradually,and level 3 and 5 iDream reconstruction groups had no significant differences in EV and El(P＞0.05);as the reconstruction level of iDream increased,PD15％and Perc 15 rose gradually,and level 3 and 5 iDream reconstruction groups had no significant differences in PD15％and Perc 15(P＞0.05).Conclusion Increase of the level of iDream reconstruction algorithm affects the results of CT quantitative analysis of lung function by reducing image noise.Level 3 and 5 iDream reconstruction ensures the stability of EV,EI,PD15％and Perc 15,which are not influenced by the strength of the iterative reconstruction algorithm.[Chinese Medical Equipment Journal,2024,45(9):57-61]

Objective:This study aimed to investigate the physical properties, biocompatibility, and 3D printing performance of a novel hybrid bioink composed of gelatin methacrylated (GelMA) and chitin nanocrystal (ChiNC).Methods:The study was conducted from May 2021 to December 2022, four different bioinks were prepared by adding varying amounts of ChiNC to GelMA bioink. The GelMA concentration in all four bioinks was 100 mg/ml, while the ChiNC concentrations were 0 mg/ml (no ChiNC added), 5 mg/ml, 10 mg/ml, and 20 mg/ml, respectively, named as GC0, GC5, GC10, and GC20 bioinks. The cross-sectional morphology of the hydrogels formed after photocuring the four bioinks was observed using scanning electron microscopy, and the porosity was calculated. Weighing the hydrogels before and after swelling, and then calculate the equilibrium swelling rate. HUVECs were seeded on the surfaces of the hydrogels prepared from the four bioinks and cultured in medium. Cell proliferation was assessed using CCK-8 assays at 1d, 3d, and 7d to compare the proliferation rates of cells on the four hydrogels. HUVECs were added to the four bioinks, and grid-like scaffolds were printed and cultured in medium. Live-Dead staining was performed at 1d and 7d to observe cell viability. Compare the printing effect of bioinks by observing its forming continuous threads properties during extrusion. Finally, tissue-engineered bladder patches simulating the mucosal layer, submucosal layer, and muscular layer anatomical structures of the bladder wall were 3D bioprinted using the optimized bioink composition, and the stability and fidelity of the printed structures were observed to further validate the feasibility of printing multi-layered complex structures with the bioink.Results:Scanning electron microscopy revealed that the porosity of the GC0, GC5, GC10, and GC20 hydrogels were (51.43±6.23)%, (51.85±6.47)%, (50.55±4.59)%, and (42.49±2.20)%, respectively. The differences in porosity between the GC0 group and the other three groups were not statistically significant ( P=0.9994, P=0.9948, P=0.1200). The equilibrium swelling ratio of the other three groups [(8.81±0.41), (7.95±0.19), (7.71±0.14)] was significantly lower than that of the GC0 group (9.37 ± 0.49), and the differences were statistically significant ( P=0.0457, P<0.01, P<0.01). CCK-8 assay showed no significant difference in absorbance value between the GC10 group (0.360±0.009) and the GC0 group (0.357±0.007), GC5 group (0.350±0.012), and GC20 group (0.345±0.018) on the first day ( P=0.9332, P=0.5464, P=0.4937). However, on the third day, the absorbance value of the GC10 group (0.755±0.012) was significantly higher than that of the GC0 group (0.634±0.010), GC5 group (0.704±0.009), and GC20 group (0.653±0.015) ( P<0.01, P=0.0033, P=0.0002). On the seventh day, the absorbance value of the GC10 group (1.001±0.031) was significantly higher than that of the GC0 group (0.846±0.026), GC5 group (0.930±0.043), and GC20 group (0.841±0.024)( P=0.0012, P=0.1390, P=0.0010). The addition of human umbilical vein endothelial cells (HUVECs) into the four groups of hydrogels enabled the printing of grid-like scaffolds, and Live-Dead staining was performed on day 1 and day 7. The cell viability of HUVECs in the four groups on day 1 was (90.13±1.63)%, (90.6±2.45)%, (92.58±2.15)%, and (91.40±3.17)%, respectively. There were no statistically significant differences between the GC0 group and the other three groups ( P=0.9869, P=0.3093, P=0.8008). On day 7, the cell viability was (89.97±3.10)%, (92.18±2.21)%, (92.05±2.25)%, and (90.12±1.97)% for the four groups, respectively. There were no statistically significant differences between the GC0 group and the other three groups ( P=0.3965, P=0.4511, P=0.9995). Bioink extrusion test showed that the GC0 hydrogel could be extruded continuously and form threads at temperatures between 24℃ and 25℃, while the GC10 hydrogel could be extruded continuously and form threads at temperatures between 24℃ and 27℃. Printing tissue engineered bladder patches simulating the anatomical structure of the bladder mucosal layer, submucosal layer, and muscular layer using GC10 bioink, and the printed patches were stable, without collapse, and had high fidelity. Conclusions:Adding ChiNC to GelMA promotes cell adhesion, proliferation, and expands the printing window of GelMA bioink. The biocompatibility of the mixed bioink prepared by adding 10 mg/ml ChiNC in GelMA is good, capable of printing tissue-engineered bladder patches that mimic the anatomical structure of natural bladder walls.

Background Diacetyl (DC) is widely used in the food flavoring industry and excessive occupational exposure to DC can cause serious respiratory diseases. However, there is no corresponding national standard method for the determination of DC in the air of workplace. Objective To establish a method for the determination of DC in workplace air by high performance liquid chromatography using 4-nitro-o-phenylenediamine (NPDA) as precolumn derivatization. Methods DC in the air of workplace was collected by solution absorption method. This experiment used NPDA as the derivatization reagent. By adjusting acidity of solution and optimizing concentration ration of DC/NPDA, derivatization temperature, and time, a method for the determination of DC in workplace air was proposed, and its performance indexes such as linearity, detection limit, and lower limit of quantification were obtained. Sampling efficiency was evaluated by relative comparison method, and sample stability was evaluated by sample preservation test. Accuracy and precision of the method were evaluated by standard addition recovery test with blank samples, and an interference test was carried out by adding standard samples. The established method was applied to actual samples to evaluate its adaptability. Results A combination of 60 °C for 2 h was selected for derivatization because a higher derivatization reaction temperature and a longer reaction time associated with a higher derivatization efficiency. The solution was separated by SB-C18 column (250 mm×4.6 mm, 5 μm) at 30 ℃, using a mixture of methanol and water (v/v, 65%/35%) as mobile phase with an elution flow rate of 1.0 mL·min⁻¹, and was detected with a variable wavelength detector (λ_max=257 nm) by qualitative analysis based on retention time and quantitative analysis based on external standard method. In terms of the proposed method, the linear range of detection was from 5 μg·L⁻¹ to 2000 μg·L⁻¹, with a correlation coefficient of 0.9999, and a detection limit of 1.3 μg·L⁻¹, the quantitative detection of the lower limit was 4.3 μg·L⁻¹, with a sampling volume V₀ of 3.0 L, the minimum detection concentration was 4.3 μg·m⁻³, and the minimum quantitative concentration was 14.3 μg·m⁻³. The recovery rate was 99.1%-100.8%, the intra-batch precision was 0.5%-3.0%, and the inter-batch precision was 1.2%-2.0%. The average sampling efficiency of this method was 94.5%, and the sample could be stored at 4 °C for at least 14 d. The coexisting components in the air of the workplace did not interfere with the determination of DC. The DC content in the air of a flavor workplace was 5.86-8.85 mg·m⁻³. Conclusion A determination method for DC in workplace air by high performance liquid chromatography using NPDA as precolumn derivatization after being collected by 1.0% phosphoric acid absorbent is proposed and has the advantages of simple operation, high sensitivity, and good accuracy. With no DC loss and degradation, the method may satisfy the request for DC determination in the air of workplace.

We performed an extensively targeting metabolomic detecting using ultra-performance liquid chromatography-mass spectrometry (UPLC-MS/MS) to compare the secondary metabolites in Dang shen [Codonopsis pilosula (Franch.) Nannf.] from Shanxi and Gansu provinces. The findings showed that 161 secondary metabolites in 6 groups (phenolic acids, flavonoids, lignans and coumarins, alkaloids, terpenoids, others) were found from Dang shen in Changzhi city of Shanxi province and Dingxi city of Gansu province. There were 98 secondary metabolites which is differed significantly. In comparison to Dingxi city, 33 different secondary metabolites of Dang shen in Changzhi city had a greater relative content, whereas relative content of 65 different metabolites in Dingxi city was higher. Metabolic pathway enrichment analysis revealed that phenolic acids and flavonoids were significantly different in the secondary metabolites of Dang shen from different producing places. This may be one of the reasons for the difference in the quality of Dang shen in Shanxi and Gansu provinces. This work compared and analyzed the secondary metabolites of Dang shen from Dingxi city in Gansu province and Changzhi city in Shanxi province for the first time, which lays the foundation for further study on the quality of Dang shen.

Abstract: Objective　To construct SARS-CoV-2 receptor binding domain molecular probe for monoclonal memory B cell sorting and obtain RBD specific neutralizing antibodies from peripheral blood mononuclear cells (PBMCs) of COVID-19 convalescents by single-cell sorting. Methods　The SARS-CoV-2 RBD sequence was downloaded from GenBank, and the Avi tag and 6-histidine tags were added at the C-terminal. After codon optimization, it was chemically synthesized, cloned into the pDRVI1.0 vector, expressed after transfection of 293F cells, and biotinylated consequently. RBD-specific B cells were sorted out with this probe1 from the PBMCs of convalescents recovered from COVID-19. After B cells were lysed, the variable regions of heavy chain and light chain were amplified, cloned into the antibody expression vector, and transfected into 293F cells to express the antibody. Then the antibody was purified from the supernatant using protein A column and SARS-CoV-2 pseudovirus was used to test their neutralizing activity. Results　RBD-Avi probe was produced and successfully biotinylated sequentially with an efficiency of 30%-50%. Western blot analysis revealed that the biotinylated probe was recognized by the antibodies purified from COVID-19 convalescent plasma. Using this probe, 7 and 16 RBD-specific memory B cells were successfully isolated from the PBMCs of two convalescent individuals, accounting for 0.24% and 0.17% of the total cell population, respectively. After amplifying the variable regions of antibody heavy and light chains from the lysed B cells, 7 and 12 pairs of antibody heavy-light chains were obtained. A total of 16 antibodies were expressed in the convalescent individuals, and most of the purified antibodies showed neutralizing activity against the pseudovirus, with IC50 values of 6 antibodies below 1 μg/mL. The IC50 values of XJ-A9 and SCF-F1 against the wild-type pseudovirus were 0.07 μg/mL and 0.35 μg/mL, respectively. Conclusion　The SARS-CoV-2 RBD molecular probe constructed in this study has good antigenicity, and the isolated antibodies present neutralizing activity against wild-type SARS-CoV-2 pseudovirus.

Objective: To characterize the serum bile acid profiles of healthy children in Zhejiang Province. Methods: A cross-sectional study was conducted on 245 healthy children who underwent imaging and laboratory biochemical tests during routine physical examinations at the Children's Hospital of Zhejiang University School of Medicine from January 2020 to July 2022. Overnight fasting venous blood samples were collected, and the concentrations of 18 individual bile acids in the serum were accurately quantitated using tandem mass spectrometry. The concentration difference of bile acid were compared between different genders and to explore the correlation between age and bile acid levels. Used the Mann-Whitney U test for intergroup comparison and Spearman test to correlation analysis. Results: A total of 245 health children with a age of 10 (8, 12) years including 125 boys and 120 girls. There were no significant differences in levels of total bile acids, primary and secondary bile acids, free and conjugated bile acids between the two gender groups (all P>0.05). The serum concentrations of ursodeoxycholic acid and glycoursodeoxycholic acid in girls were significantly higher than those in boys (199.0 (66.9, 276.5) vs. 154.7 (49.3, 205.0) nmol/L, 274.0 (64.8, 308.0) vs. 181.0 (43.8, 209.3) nmol/L, Z=2.06, 2.71, both P<0.05). The serum taurolithocholic acid in both boys and girls were positively correlated with age (r=0.31, 0.32, both P<0.05). The serum chenodeoxycholic acid and glycochenodeoxycholic acid in the boys group were positively correlated with age (r=0.20, 0.23, both P<0.05), whereas the serum tauroursodeoxycholic acid in the girls group was negatively correlated with age (r=-0.27, P<0.05), and the serum cholic acid was positively correlated with age (r=0.34, P<0.05). Conclusions: The total bile acid levels are relatively stable in healthy children in Zhejiang province. However, individual bile acids showed gender differences and were correlated with age.
Humans ; Child ; Female ; Male ; Cross-Sectional Studies ; Bile Acids and Salts ; Hospitals, Pediatric ; Laboratories

OBJECTIVE: To investigate the surgical skills and clinical curative results of arthroscopic treatment of ankle instability combined with anteromedial impingement syndrome. METHODS: From February 2019 to August 2020, 13 patients with ankle instability combined with anteromedial impingement were retrospectively analyzed. There were 10 males and 3 females with age of (40.0±15.1) years old. The course of disease was(44.1±33.2) months. All patients had history of ankle sprain. MRI showed the injury of anterior talofibular ligament. All patients had anteromedial pain and pressing pain when ankle dorsiflexion. All patients were treated with ankle debridement and Brostr?m-Gould surgery under ankle arthroscopic. Postoperative results were evaluated by VAS(visual analogue scale) and AOFAS-AH(American Orthopaedic Foot and Ankle Society Ankle-Hindfoot scale, AOFAS-AH). RESULTS: All 13 patients completed the surgery successfully with an operative time of 60 to 90 minutes. All the surgical incisions healed by first intention, and no complications such as incision infection, skin necrosis and neurovascular injury. Follow-up time was (18.1±4.7) months. At the latest follow-up, the VAS score was 1.2±1.1, which was significantly lower than the preoperative score 4.8±1.5 (P<0.05);the AOFAS-AH score 94.2±5.1 was significantly higher than the preoperative score 65.5±11.5 (P<0.05). The AOFAS-AH score at the final follow-up ranged from 84 to 100. All patients walked with normal gait without ankle instability or impingement recurrence. CONCLUSION Ankle anteromedial impingement syndrome combined with ankle instability is easy to be ignored clinically. Such kind of anteromedial impingement syndrome is mostly related to osteophyte at dorsal medial talar neck. Arthroscopic treatment of ankle instability combined with anteromedial impingement syndrome has satisfactory curative effect with safety and minimal injury.
Adult ; Ankle ; Arthroscopy/methods* ; Female ; Humans ; Joint Instability/surgery* ; Male ; Middle Aged ; Retrospective Studies ; Treatment Outcome ; Young Adult