Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.

Objective: To construct a scientific and perfect evaluation index system of infectious disease prevention and control ability in colleges and universities, so as to provide reference tools for colleges and universities to effectively respond to infectious disease. Methods: The initial framework of the evaluation index system of infectious disease prevention and control ability in colleges and universities was constructed by using literature analysis method. Experts familiar with infectious disease prevention and control or school health work were selected to conduct two rounds( n =16，18) of Delphi expert consultation for determining the evaluation index system. Analytical hierarchy process was used to calculate the index weights and combined weights. About 198 prevention and control personnel were conveniently selected from 3 universities in Inner Mongolia Autonomous Region to comprehensively evaluate the evaluation indicators by using fuzzy comprehensive evaluation method. Results: After two rounds of Delphi consultation questionnaire, the effective recovery rates were 80.0% and 90.0%, the expert authority levels were 0.89 and 0.86, the expert harmony coefficients for Kendall W were 0.166 and 0.310, and the variation coefficient of each index was <0.25. Finally, the evaluation index system of infectious disease prevention and control ability of colleges and universities included 4 first level indicators, 14 second level indicators and 75 third level indicators. The weights of prevention and monitoring and early warning, organizational system guarantee, emergency management, rehabilitation and summary were 0.176, 0.476, 0.268 and 0.080, respectively. The top 3 weights of the secondary indexes were 0.623 for infectious disease surveillance and early warning, 0.595 for loss assessment and 0.370 for emergency response. The score of fuzzy comprehensive evaluation of the index system of infectious disease prevention and control ability in colleges and universities was 79.148, suggesting a high level. Conclusion The established evaluation index system of infectious disease prevention and control ability in colleges and universities is scientific and reasonable, which is conducive to provide tool reference for the evaluation of infectious disease prevention and control ability in colleges and universities.

Tumor drug resistance is an important problem in the failure of chemotherapy and targeted drug therapy, which is a complex process involving chromatin remodeling. SWI/SNF is one of the most studied ATP-dependent chromatin remodeling complexes in tumorigenesis, which plays an important role in the coordination of chromatin structural stability, gene expression, and post-translation modification. However, its mechanism in tumor drug resistance has not been systematically combed. SWI/SNF can be divided into 3 types according to its subunit composition: BAF, PBAF, and ncBAF. These 3 subtypes all contain two mutually exclusive ATPase catalytic subunits (SMARCA2 or SMARCA4), core subunits (SMARCC1 and SMARCD1), and regulatory subunits (ARID1A, PBRM1, and ACTB, etc.), which can control gene expression by regulating chromatin structure. The change of SWI/SNF complex subunits is one of the important factors of tumor drug resistance and progress. SMARCA4 and ARID1A are the most widely studied subunits in tumor drug resistance. Low expression of SMARCA4 can lead to the deletion of the transcription inhibitor of the BCL2L1 gene in mantle cell lymphoma, which will result in transcription up-regulation and significant resistance to the combination therapy of ibrutinib and venetoclax. Low expression of SMARCA4 and high expression of SMARCA2 can activate the FGFR1-pERK1/2 signaling pathway in ovarian high-grade serous carcinoma cells, which induces the overexpression of anti-apoptosis gene BCL2 and results in carboplatin resistance. SMARCA4 deletion can up-regulate epithelial-mesenchymal transition (EMT) by activating YAP1 gene expression in triple-negative breast cancer. It can also reduce the expression of Ca²⁺ channel IP3R3 in ovarian and lung cancer, resulting in the transfer of Ca²⁺ needed to induce apoptosis from endoplasmic reticulum to mitochondria damage. Thus, these two tumors are resistant to cisplatin. It has been found that verteporfin can overcome the drug resistance induced by SMARCA4 deletion. However, this inhibitor has not been applied in clinical practice. Therefore, it is a promising research direction to develop SWI/SNF ATPase targeted drugs with high oral bioavailability to treat patients with tumor resistance induced by low expression or deletion of SMARCA4. ARID1A deletion can activate the expression of ANXA1 protein in HER2+ breast cancer cells or down-regulate the expression of progesterone receptor B protein in endometrial cancer cells. The drug resistance of these two tumor cells to trastuzumab or progesterone is induced by activating AKT pathway. ARID1A deletion in ovarian cancer can increase the expression of MRP2 protein and make it resistant to carboplatin and paclitaxel. ARID1A deletion also can up-regulate the phosphorylation levels of EGFR, ErbB2, and RAF1 oncogene proteins.The ErbB and VEGF pathway are activated and EMT is increased. As a result, lung adenocarcinoma is resistant to epidermal growth factor receptor tyrosine kinase inhibitors (EGFR-TKIs). Although great progress has been made in the research on the mechanism of SWI/SNF complex inducing tumor drug resistance, most of the research is still at the protein level. It is necessary to comprehensively and deeply explore the detailed mechanism of drug resistance from gene, transcription, protein, and metabolite levels by using multi-omics techniques, which can provide sufficient theoretical basis for the diagnosis and treatment of poor tumor prognosis caused by mutation or abnormal expression of SWI/SNF subunits in clinical practice.

Objective: To investigate the environmental contamination of norovirus in nurseries and primary/secondary schools, so as to provide a scientific basis for effective prevention and control measures. Methods: A total of 483 external environmental samples were collected from 34 cluster outbreaks of norovirus gastroenteritis in kindergartens and primary/secondary schools in Linhai City from 2021 to 2024. Pathogen detection was conducted using a rapid nucleic acid extraction kit and realtime fluorescence RT-PCR, and the results were analyzed using the χ2 test or Fishers exact test. Results: Among the collected external environmental samples, the total positive rate of surface contamination was 13.66%. The positive rates in kindergartens and primary/secondary schools were 12.20% and 15.82%, respectively. In kindergartens, the five surfaces with the highest detection rates were desks/chairs (23.33%), toilet stool troughs (20.69%), urinal troughs (12.00%), washbasins/sinks (11.11%), and toilet mops (9.38%). In primary/secondary schools, the top five were toilet stool troughs (38.30%), urinal troughs (23.53%), toilet door handles (13.04%), toilet mops (12.50%), and drinking cups (11.11%). The difference in positive detection rates among different external environments in primary/secondary schools was statistically significant (Fishers exact probability test, P<0.01). The positive detection rate in sanitary toilets was higher than that in classroom environments (χ2=17.38), while the positive detection rate in classroom environments of kindergartens was higher than that in primary/secondary schools (χ2=5.42)(P<0.05). Conclusions Norovirus exhibits a high contamination rate in nurseries and schools, particularly in restroom areas. Strengthening sanitation and disinfection in highrisk environments, and improving hygiene awareness among children and staff, are essential for the effective prevent and control of norovirus.

Jiegeng decoction is a classic prescription composed of two Chinese medicinal herbs： Platycodon grandiflorum and Glycyrrhiza uralensis. It has the efficacy of diffusing lung qi， resolving phlegm， relieving sore throat and discharging pus， and is commonly used in the treatment of respiratory diseases such as cough and pharyngodynia. This article reviews the chemical components， pharmacological mechanisms and clinical applications of Jiegeng decoction. It was found that Jiegeng decoction contains triterpenoid saponins， flavonoids， glycosides， acids， and other components， with platycodin D， platycodin D2， glycyrrhizic acid， glycyrrhetinic acid， liquiritin， etc.， serving as the main active pharmaceutical ingredients. Jiegeng decoction and its chemical constituents exert anti-inflammatory effects by inhibiting signaling pathways such as nuclear factor-κB and mitogen- activated protein kinases， and demonstrate anti-tumor activities through mechanisms like modulating the tumor immune microenvironment and promoting cancer cell apoptosis. Additionally， it exhibits various pharmacological actions including antibacterial， antiviral， and antioxidant effects. Clinically， Jiegeng decoction， its modified prescription and compound combinations are widely used in the treatment of respiratory diseases such as cough， pneumonia， and pharyngitis， as well as digestive system disorders like constipation.

Background Polycyclic aromatic hydrocarbons (PAHs), one of the main components of fine particulate matter (PM_2.5), have a certain impact on ambient air quality, and long-term exposure to PAHs may pose potential health risks to human beings. Objective To identify the distribution characteristics and sources of PAHs in atmospheric PM_2.5 in a district of Taizhou City from 2019 to 2021, and to evaluate the health risks of PAHs to the population in the area through the inhalation pathway. Methods From 2019 to 2021, air PM_2.5 sampling was carried out at a state-controlled surveillance point in a district of Taizhou City for 7 consecutive days on the 10th-16th of each month, the sampling time was 24 h·d⁻¹, and the sampling flow rate was 100 L·min⁻¹. PM_2.5 mass concentration was calculated by gravimetric method. A total of 16 PAHs were determined by ultrasonic extraction-liquid chromatography. Kruskal-Wallis H test was used to compare the distribution charac teristics of PAHs concentrations by years and seasons, characteristic ratio and principal component analysis (PCA) was used to analyze their sources, and a lifetime carcinogenic risk (ILCR) model was used to assess the health risk of PAHs. Results From 2019 to 2021, the annual average concentrations [M (P₂₅, P₇₅)] of ∑PAHs in atmospheric PM_2.5 in the selected district of Taizhou City were 6.52 (2.46, 10.59), 8.52 (4.56, 12.29), and 3.72 (1.51, 7.11) ng·m⁻³, respectively, and the annual benzo[a]pyrene (BaP) excess rates (national limit: 1 ng·m⁻³) were 27.38% (23/84), 47.62% (40/84), and 19.04% (16/84), respectively, both presenting 2020> 2019 > 2021 (P<0.001, P<0.05). The ∑PAHs concentration distribution showed a seasonal variation, with the highest value in winter and the lowest value in summer (P<0.05). Among the atmospheric PM_2.5 samples, the proportion of 5-ring PAHs was the highest, the proportion of 2-3-ring PAHs was the lowest; the proportion of 2-4-ring PAHs showed a yearly upward trend, and the proportion of 5-6-ring PAHs showed yearly downward trend (P<0.05). The characteristic ratio and PCA results suggested that the sources of sampled PAHs were mainly mixed sources such as dust, fossil fuel (natural gas), coal combustion, industrial emissions, and motor vehicle exhaust emissions. The ILCR (R_ILCR) of PAHs by inhalation for men, women, and children were 1.83×10⁻⁶, 2.35×10⁻⁶, and 2.04×10⁻⁶, respectively, and the annual average R_ILCR was 2.07×10⁻⁶, all greater than 1×10⁻⁶. Conclusion For the sampled time period, the main sources of PAHs pollution in atmospheric PM_2.5 in the target district of Taizhou City are dust, fossil fuel (natural gas), coal combustion, industrial emissions, motor vehicle emissions, etc., and PAHs may have a potential carcinogenic risk to local residents.

Objective To explore the advantages of indocyanine green clearance rate at 15 min(ICG-R15)combined with three-dimensional image reconstruction technology in preoperativ evaluation of liver cancer,as well as its impact on the efficacy of liver resection surgery.Methods The data of the patients with liver cancer undergoing preoperative three-dimensional image reconstruction evaluation(experimental group,n=65)and traditional CT evaluation(control group,n=70)in the Jining Municipal First People's Hospital from January 2018 to January 2021 were retrospectively analyzed.All patients performed the ICG-R15 test be-fore operation.In the experimental group,45 cases adopted laparotomy and 20 cases adopted laparoscopic sur-gery,which in the control group had 50 cases and 20 cases,respectively.The data of preoperative laboratory tests,intraoperative related indicators and postoperative laboratory tests were collected in the two groups.The influences between the two kinds of evaluation modes on the effects of laparotomy and laparoscopic surgery in liver cancer were compared.Results In laparotomy,compared with the control group,the operation time and postoperative drainage tube extraction time in the experimental group were significantly shortened,the intrao-perative bleeding volume was significantly decreased,the incidence rate of postoperative complications,direct bilirubin and AST levers on 7 d after operation were significantly decreased(P＜0.05);there were no statis-tically significant differences in the intraoperative blood transfusion rate,postoperative hospitalization dura-tion,levels of total bilirubin,ALT and albumin and prothrombin time on 7 d after operation between the two groups(P＞0.05).In laparoscopic surgery,compared with the control group,the postoperative hospitalization duration and postoperative drainage tube extraction time in the experimental group were significantly short-ened,the levels of AST and ALT on 7 d after operation were significantly decreased(P＜0.05);there was no statistically significant difference in the other observation indicators between the two groups(P＞0.05);in the control group,3 cases were converted to laparotomy due to inability to excision during laparoscopic explo-ration.Compared with the control group,the accuracy rate of preoperative evaluation of the number of liver tumors and Couinaud segmentation localization(96.9％vs.85.7％)and preoperative evaluation of liver vas-cular variation(100.0％vs.53.8％)were increased in the experimental group,the percentage of the patients with actual resection range greater than preoperative prediction range was lower(7.7％vs.20.0％),and the differences were statistically significant(P＜0.05).There was no statistically significant difference in the accu-racy of preoperative evaluation of portal vein invasion between the two groups(P＞0.05).Conclusion ICG-R15 combined with three dimensional reconstruction technology in preoperatively assessing liver cancer has more advantages compared with combined traditional CT,moreover which is conducive to reduce intraoperative bleeding,shorten operation time and has the positive effect on the patients'prognosis.

Objective To explore the application value of Fast Dixon technique in MR hip joint scanning.Methods Fifty young volunteers were recruited to perform axial and coronal MR scans of the hip joint.The scanning sequence was Fast Dixon T2WI sequence and conventional Dixon T2WI sequence.A double-blind five-point scale was used to subjectively evaluate the image quality of the two types sequences.The signal-to-noise ratio(SNR)and contrast-to-noise ratio(CNR)of the axial image were measured at the maximum level of the bladder display.Results In the scores of"good contrast between surrounding tissue and femoral head signal"and"overall image quality",the Fast Dixon T2WI sequence was better than the conventional Dixon T2WI sequence,and the difference was statistically significant(P<0.05).There was no significant difference in the average scores of"whether bladder artifacts affected the diagnosis"and"whether the fat suppression effect was good"between Fast Dixon T2WI sequence and conventional Dixon T2WI sequence(P>0.05).In the objective image quality evaluation,the SNR and CNR of Fast Dixon T2WI sequence were better than those of conventional Dixon T2WI sequence,and the difference was statistically significant(P<0.05).Conclusion The image quality score of the hip joint of young volunteers with Fast Dixon T2WI sequence combined with multiple averaging excitation technique is significantly higher than that of conventional Dixon T2WI sequence.The Fast Dixon T2WI sequence can increase the effect of inhibiting fat and motion artifacts without increasing the scanning time,and the joint face ratio is good.Fast Dixon technique can replace the traditional Dixon technique,thus becoming an optimal choice for hip joint MR scanning.