ObjectiveTo establish a model that can quickly identify the aroma components in different parts of Nardostachys jatamansi， so as to provide a quality control basis for the market circulation and clinical use of N. jatamansi. MethodsHeadspace solid-phase microextraction-gas chromatography-mass spectrometry（HS-SPME-GC-MS） combined with Smart aroma database and National Institute of Standards and Technology（NIST） database were used to characterize the aroma components in different parts of N. jatamansi， and the aroma components were quantified according to relative response factor（RRF） and three internal standards， and the markers of aroma differences in different parts of N. jatamansi were identified by orthogonal partial least squares-discriminant analysis（OPLS-DA） and cluster thermal analysis based on variable importance in the projection（VIP） value >1 and P<0.01. The odor data of different parts of N. jatamansi were collected by Heracles Ⅱ Neo ultra-fast gas phase electronic nose， and the correlation between compound types of aroma components collected by the ultra-fast gas phase electronic nose and the detection results of HS-SPME-GC-MS was investigated by drawing odor fingerprints and odor response radargrams. Chromatographic peak information with distinguishing ability≥0.700 and peak area≥200 was selected as sensor data， and the rapid identification model of different parts of N. jatamansi was established by principal component analysis（PCA）， discriminant factor alysis（DFA）， soft independent modeling of class analogies（SIMCA） and statistical quality control analysis（SQCA）. ResultsThe HS-SPME-GC-MS results showed that there were 28 common components in the underground and aboveground parts of N. jatamansi， of which 22 could be quantified and 12 significantly different components were screened out. Among these 12 components， the contents of five components（ethyl isovalerate， 2-pentylfuran， benzyl alcohol， nonanal and glacial acetic acid，） in the aboveground part of N. jatamansi were significantly higher than those in the underground part（P<0.01）， the contents of β-ionone， patchouli alcohol， α-caryophyllene， linalyl butyrate， valencene， 1，8-cineole and p-cymene in the underground part of N. jatamansi were significantly higher than those in the aboveground part（P<0.01）. Heracles Ⅱ Neo electronic nose results showed that the PCA discrimination index of the underground and aboveground parts of N. jatamansi was 82， and the contribution rates of the principal component factors were 99.94% and 99.89% when 2 and 3 principal components were extracted， respectively. The contribution rate of the discriminant factor 1 of the DFA model constructed on the basis of PCA was 100%， the validation score of the SIMCA model for discrimination of the two parts was 99， and SQCA could clearly distinguish different parts of N. jatamansi. ConclusionHS-SPME-GC-MS can clarify the differential markers of underground and aboveground parts of N. jatamansi. The four analytical models provided by Heracles Ⅱ Neo electronic nose（PCA， DFA， SIMCA and SQCA） can realize the rapid identification of different parts of N. jatamansi. Combining the two results， it is speculated that terpenes and carboxylic acids may be the main factors contributing to the difference in aroma between the underground and aboveground parts of N. jatamansi.

The mutual learning between Chinese and Western civilizations today provides a broad perspective and new opportunity for the development of traditional Chinese medicine （TCM）， fostering the interdisciplinary integration， fusion， and innovation of the discipline. The premise of mutual understanding of civilizations is uphold the principles of Chinese traditional scholarship and original thinking， overcome academic barriers and cognitive differences， and achieve the organic integration of knowledge systems and research methods. The development of TCM as a discipline should first be based on literature as a carrier to convey ideas and ensure the continuity of the academic tradition. Secondly， the discipline development should be guided by the unique， original thinking of TCM， accurately identifying the bottlenecks in its development， focusing on the key links for improvement， continuously exploring innovative academic paths， and striving to build a leading research platform. Finally， the cultivation of talents in the field of TCM discipline should focus on leading ones with international academic discourse power and influence， and establish an academic team with clinical thinking and interdisciplinary knowledge structure.

As a chronic and lifelong disease， diabetes mellitus occurs across all age groups and gender groups. Since the disease requires lifelong treatment， it seriously affects the quality of life of patients. With the rising incidence on a global scale， diabetes mellitus has become a global problem that seriously affects public health. Moreover， the complications of this disease have aroused concern from the global medical research community， the World Health Organization， and the public. In the past， Western medicine was used in the clinical treatment of diabetes mellitus， which， however， had drug dependence， unsatisfactory efficacy， and side effects. Long-term oral administration of antidiabetics may cause liver and kidney function damage， hypoglycemia and other adverse symptoms. The treatment of diabetes mellitus has been faced with challenges such as limited efficacy and obvious side effects. Therefore， exploring more effective treatment means， especially tapping the potential of traditional Chinese medicine （TCM） in the treatment of diabetes mellitus， is a major issue to be solved. TCM has shown a great application value and a broad prospect in the treatment of diabetes mellitus because of multi-target regulation， a holistic view， synergistic effects， and high safety. TCM has a history of thousands of years in the prevention and treatment of diabetes mellitus， with rich experience accumulated and remarkable results achieved. Particularly， TCM demonstrates definite therapeutic effects on the complications. The application of TCM in the treatment of complications has been recognized and accepted by patients because of the definite therapeutic effect. In recent years， great progress has been achieved in the treatment of diabetes mellitus by the combination of Chinese and western medicine， which has made important contributions to the control of diabetes mellitus. This paper reviews the articles about the treatment of diabetes mellitus with TCM classic prescriptions， summarizes the treatment of clinical cases regarding the indications of these prescriptions， and provides an overview of the treatment mechanisms， aiming to offer fresh insights and strategies for the clinical diagnosis and treatment of diabetes mellitus.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

BACKGROUND:Ossification of the ligamentum flavum was previously considered to be rare in the population.As research has progressed,its incidence rate is increasing gradually,which has aroused the interest of a large number of researchers. OBJECTIVE:To visualize and analyze the research results on ossification of the ligamentum flavum from the Web of Science Core Collection since 1999 using bibliometric methods,and to review the research history of ossification of the ligamentum flavum,highlighting important literature,summarizing research hotspots,and providing ideas for researchers to find research directions. METHODS:Using the Web of Science Core Collection as the data source,relevant papers on ossification of the ligamentum flavum were searched and screened.VOSviewer 1.6.19 and CiteSpace 6.2.R6 were used to conduct the visual analysis of annual publication volume,research countries,institutions,citations,journals,authors,and keywords. RESULTS AND CONCLUSION:(1)A total of 347 papers were included.Since 1999,the number of published papers has increased in a spiral pattern.China's research started later than Japan's,but the number of publications has come up later,with Peking University being the institution with the most publications,and Prof.Chen Zhongqiang from Peking University being the scholar with the most publications.(2)Five of the 10 most frequently cited publications were related to the surgical treatment of the disease.(3)Excluding keywords directly related to the research topic and synthetically analyzing frequencies and betweenness centralities of key words,terms such as"thoracic myelopathy,""dural ossification,""minimally invasive surgery,"and"ossification of the posterior longitudinal ligament"occupied a central position in this field.(4)Keywords clustering analysis showed that clinical manifestations and surgical treatment of ossification of the ligamentum flavum accounted for a large proportion of study.(5)The timeline and burst analysis of keywords revealed that"minimally invasive surgery"appeared as a keyword around 2015,with the highest burst strength and the latest burst start time,and began to receive extensive attention from researchers in 2019.The burst of the keyword"dural ossification"has not yet ended.(6)Surgical treatment for ossification of the ligamentum flavum has been at the forefront of research.Development and research of minimally invasive surgery and research on dural ossification secondary to ossification of the ligamentum flavum are both current research hotspots and possible future research trends.

BACKGROUND:Zinc-based alloy medical implant materials have excellent mechanical properties,complete degradability and good biocompatibility,and are mainly used in orthopedic implants,cardiovascular stents,bile duct stents,tracheal stents,nerve catheters,etc. OBJECTIVE:To review the research progress of biodegradable zinc-based alloys in bone defect repair and prospect the promising research direction and achievements of zinc-based materials. METHODS:After searching PubMed,Web of Science,WanFang Data,and CNKI databases from the establishment of the database to June 2023,various relevant articles on biodegradable zinc-based alloys for bone implant material research were collected.The basic characteristics of biodegradable zinc based alloys were summarized,and the role of zinc-based alloys in promoting bone tissue repair was sorted and summarized.The current research hotspots and shortcomings were discussed. RESULTS AND CONCLUSION:(1)Zinc-based alloys have good biocompatibility.Using zinc-based alloys as the matrix material,with the help of scaffold structure construction technology and coating optimization process,the bone conductivity of zinc-based alloys will be effectively improved,and their degradation products will have efficient bone induction to regulate the gene expression of osteoblasts and osteoclasts,thereby promoting the repair and reconstruction of bone defects.(2)However,in the research on optimizing zinc-based alloys,the coating process is relatively insufficient,and additive loading technology is still lacking.(3)Zinc-based alloys have excellent mechanical and biological properties.Through special processes,their bone conductivity and osteoinductivity can be increased to effectively improve their ability to promote bone repair and reconstruction,and it is expected to further achieve the development of personalized transplant materials.Further research and development are needed to optimize the integration of coating and additive loading technologies into zinc-based alloys.

BACKGROUND:Osteoporotic vertebral fractures are the most common complication in patients with osteoporosis.As a new imaging technique,spine magnetic resonance imaging(MRI)is much more sensitive than X-ray film in the diagnosis of osteoporotic vertebral fractures.However,total spine MRI is costly and takes a long time to scan.Therefore,there is no consensus on whether all patients with osteoporotic vertebral fractures need to undergo total spine MRI scan and which patients need to undergo total spine MRI. OBJECTIVE:To analyze the distribution characteristics of vertebral fractures and explore their clinical significance by observing the whole spine MRI data of osteoporotic vertebral fractures patients. METHODS:Data of cases and MRI images of all patients diagnosed with fresh osteoporotic vertebral fractures who visited the Department of Orthopedics,Affiliated Hospital of Southwest Medical University from August 2018 to September 2022 were retrospectively analyzed.903 patients were included in the study based on inclusion and exclusion criteria.General information(age,gender,and body mass index),medical history characteristics(duration of illness,history of trauma surgery,percussion pain area,and pain score)were collected.The characteristics of vertebral fractures were analyzed through whole spine magnetic resonance imaging.Firstly,based on the number of vertebral fractures in patients,they were divided into the single vertebral fracture group(484 cases)and the multi-vertebral fracture group(419 cases),and the differences were analyzed between the two groups.Then,based on whether the farthest interval between the fractured vertebrae was greater than or equal to 5,the multi vertebral fracture group was further divided into two subgroups.Among them,Group A(the farthest interval between the fractured vertebrae was less than 5)contained 306 cases;Group B(with the farthest interval between fractured vertebral bodies greater than 5)included 113 cases.The differences were analyzed between two subgroups. RESULTS AND CONCLUSION:(1)Among 903 patients,419 patients(46.4%)had more than two fractured vertebrae.There were 654 patients(72.4%)with thoracolumbar fractures,and 54 patients(6%)with fractures in the thoracic plus lumbar region and the entire thoracic to lumbar region.In group B,96.5%of patients had multiregional percussion pain.(2)Compared with the patients in the single vertebral fracture group and the multi-vertebral fracture group,there were significant differences in bone mineral density,whether the medical history was greater than or equal to 1 month,the history of low energy injury,and the distribution and number of axial percussion pain areas in the spine during physical examination between the two groups(P<0.05).Age,gender,body mass index,whether there was underlying disease,pain visual analog scale score,whether there was a history of elderly thoracolumbar fracture,and whether there was a history of thoracolumbar surgery,and the number of fractured vertebrae had no statistical significance(P>0.05).(3)There were statistically significant differences between the Groups A and B in bone mineral density,the distribution and quantity of percussion pain area,and the history of low energy injury(P<0.05).There were no significant differences in age,gender,history of old fractures,visual analog scale score,body mass index,whether the medical history was longer than or equal to 1 month,history of underlying diseases,and history of thoracolumbar surgery between the two groups(P>0.05).(4)Patients with multiple low-energy trauma history,history of more than 1 month,multiple percussion pain,and the lower bone mineral density should be alert to the occurrence of multiple vertebral fracture and jump fracture.We recommend the whole spinal MRI for these patients.

BACKGROUND:With the development of computer-aided design and computer-aided manufacturing technology,zirconia abutments with a titanium base are widely used in clinic due to its good application advantages,but there are still some problems and a lack of consensus design standards. OBJECTIVE:To review the fabrication methods of Ti-base zirconia abutment,and the effect of abutment connection,emergence design,abutment angle,and bonding on mechanical properties of Ti-base zirconia abutment. METHODS:Relevant literature published from 2010 to 2023 was searched in CNKI and PubMed databases with the search terms"zirconia abutment,titanium base"in Chinese and English,respectively.The search time limit was extended for some classical literature.The relevant literature was obtained through inclusion and exclusion criteria,and 57 eligible documents were included for review. RESULTS AND CONCLUSION:It is recommended that clinicians try to select antirotational titanium bases or rotational titanium bases with a Morse taper connection.Implants should be placed in the correct axial angulation of not more than 15° or with an inclination to the palatal side when using angled zirconia abutments.When a≥30° labial inclination is followed for implant placement,the bite force must be decreased effectively to reduce the risk of mechanical and biological complications of implants,abutments,and prostheses.Ti-base zirconia abutments with a higher gingival height should be selected,and its restorative angle should not exceed 40°.Multilink Hybrid Abutment could be the first choice for extraoral bonding of zirconia abutment to titanium bases.

Objective To explore the effects of air pressure, humidity, wind, and sunshine on the incidence of cardiovascular and cerebrovascular diseases (CVD) in Guiyang, and to provide reference for the prevention of CVD. Methods Using CVD incidence data from September 2021 to August 2022 in Guiyang City and meteorological data including average air pressure, average humidity, wind, and sunshine during the same period, the effects of meteorological factors on CVD incidence were explored and the importance of each factor was analyzed. Results When air pressure was below 868 hPa, above 887 hPa, or between 877 and 883 hPa, and when air pressure dropped less than 5.3 hPa within 24 hours, there was a higher risk of CVD. When the humidity was above 81%, the wind speed was small (<1.2 m/s) or high (>4m/s), and there was less sunlight (less than 3 hours), the risk of CVD was higher. Low humidity (<60%) was not conducive to the onset of CVD. There were highest risks at lag 5~10 days and 4-25 days for high pressure and low sunlight, respectively. When the relative humidity was saturated, there was an immediate effect. When the wind speed was low and high, the immediate effect and hysteresis effects were significant. Among the above meteorological factors, the impact of 24-hour variation of pressure and high or low atmospheric pressure on the incidence of CVD was the most significant, while the impact of sunlight and humidity was the weakest. The impact of diurnal variations in wind and atmospheric pressure was not clear. Conclusion The impact of air pressure on the incidence of CVD does not exhibit a simple linear relationship. The risk of CVD is high in high humidity, low light, and moderate or strong winds. It is necessary to fully consider changes in meteorological factors for CVD prevention and control.