ObjectiveTo study the mechanism of compound Xishu granules （CXG） in inhibiting the proliferation of hepatocellular carcinoma cells by regulating ferroptosis. MethodsThe transplanted tumor model of human Huh7 was established with nude mice and the successfully modeled mice were randomized into model， Fufang Banmao （0.21 g·kg^-1）， low-dose （1.87 g·kg^-1） CXG， medium-dose （3.74 g·kg^-1） CXG， and high-dose （7.49 g·kg^-1） CXG groups. Mice were administrated with drinking water or CXG for 28 days， and the body weight and tumor volume were measured every 4 days. Hematoxylin-eosin staining was employed to observe the histopathological changes of tumors. The cell-counting kit-8 （CCK-8） was used to examine the survival rate of Huh7 cells treated with different concentrations （0， 31.25， 62.5， 125， 250， 500， 1 000 mg·L^-1） of CXG for 24 h and 48 h. CA-AM， DCFH-DA， and C11-BODIPY^581/591 fluorescent probes were used to determine the intracellular levels of ferrous ion （Fe²⁺）， reactive oxygen species （ROS）， and lipid peroxide （LPO）， respectively. The colorimetric method was employed to measure the levels of glutathione （GSH） and superoxide dismutase （SOD）. Western blot was employed to determine the protein levels of glutathione peroxidase 4 （GPX4）， transferrin receptor 1 （TFR1）， and ferritin heavy chain 1 （FTH1）， respectively. ResultsIn the animal experiment， compared with the model group， the drug treatment groups showed reductions in the tumor volume from day 12 （P<0.01）. After treatment， the Fufang Banmao and low-， medium-， and high-dose CXG groups had lower tumor volume， relative tumor volume， and tumor weight than the model group （P<0.05）， with tumor inhibition rates of 48.99%， 79.93%， 91.38%， and 97.36%， respectively. Moreover， the CXG groups had lower tumor volume and relative tumor volume （P<0.05 in all the three dose groups） and lower tumor weight （P<0.05 in medium-dose and high-dose groups） than the Fufang Banmao group. Compared with the model group， the drug treatment groups showed reduced number of tumor cells， necrotic foci with karyopyknosis， nuclear fragmentation， and nucleolysis， and the high-dose CXG group showed an increase in the proportion of interstitial fibroblasts. In the cell experiment， compared with the blank group， CXG reduced the survival rate of Huh7 cells in a dose-dependent manner after incubation for 24 h and 48 h （P<0.05）. Compared with the blank group， the RSL3 group and the low-， medium-， and high-dose CXG groups showed a decrease in the relative fluorescence intensity of CA-AM and increases in the fluorescence intensity of DCFH-DA and fluorescence ratio of C11-BODIPY^581/591， which indicated elevations in the levels of Fe²⁺ （P<0.01）， ROS （P<0.05）， and LPO （P<0.01）， respectively. Compared with the blank group， the RSL3 and low-， medium-， and high-dose CXG groups showed lowered levels of GSH and SOD （P<0.05）. In addition， the RSL3 group and the medium- and high-dose CXG groups showed down-regulated expression of GPX4 and FTH1 （P<0.05）， and the low- and high-dose CXG groups presented up-regulated expression of TFR1 （P<0.05）. ConclusionCXG suppresses the proliferation of hepatocellular carcinoma cells by inducing ferroptosis via downregulating the GSH-GPX4 signaling axis and increasing intracellular Fe²⁺and LPO levels.

Background As a pillar industry in China, the manufacturing sector has a high incidence of non-fatal occupational injuries. The factors influencing non-fatal occupational injuries in this industry are closely related at various levels, including individual, equipment, environment, and management, making the analysis of these influencing factors complex. Objective To identify influencing factors of non-fatal occupational injuries among manufacturing workers, providing a basis for targeted interventions and surveillance. Methods A total of 2243 frontline workers from cable and shipbuilding enterprises were selected as study subjects to investigate the incidence of non-fatal occupational injuries and collect information at four levels: individual, equipment, management, and environment in past 12 months. Data balancing was performed using resampling, and LASSO regression was used to select factors of non-fatal occupational injuries. The influence degree and type of variables were judged based on the magnitude of the estimated coefficients of each variable, where variables with estimated coefficients > 0 are risk factors, and those <0 are protective factors. The area under the receiver operating characteristic (ROC)curve (AUC) was used to test the performance of the model, with an AUC value > 0.7 indicating good model performance. Results Among the 2243 frontline workers, males accounted for 77.7% (1742 out of 2243), with the main age range being 40-49 years old, representing 29.5% (661 out of 2243), 82.7% of the workers (1854 out of 2243) were married, and 55.6% (1248 out of 2243) had a junior middle school education level. The average monthly income for 51.0% (1144 out of 2243) of the workers was between 5000 and 6999 Chinese Yuan. The incidence of non-fatal occupational injuries among the manufacturing workers was 8.4% (189/2243) in the past 12 months. Among the 22 factors associated with the occurrence of non-fatal occupational injuries (P<0.05), 10 were individual-level factors, including gender, smoking, alcohol consumption, colleague relationships, average exercise duration, job burnout, work fatigue, musculoskeletal disorders, cardiovascular diseases, and neurological and sensory organ diseases; 3 were equipment-level factors, including equipment operability, hazardous workpieces, and safety hazards; 5 were environmental-level factors, including low temperatures, special operations, noise, workspace size, and dirty and disorderly environment; and 4 were management-level factors, including daily working hours, weekly working days, overtime, and pre-job technical training. The AUC value of the LASSO regression model was 0.704 and the final model retained a total of 10 variables. Among them, there were 7 risk factors for non-fatal occupational injuries (coefficient > 0), including safety hazards, musculoskeletal disorders, dangerous workpieces, job burnout, dirty and disorderly environment, smoking, and male gender; and 3 protective factors (coefficient < 0), including pre-job technical training, good colleague relationship, and long working days per week. Conclusion Manufacturing enterprises need to focus on the incidence of non-fatal occupational injuries and conduct targeted interventions for non-fatal occupational injuries by controlling potential safety hazards, providing pre-job technical training, reducing dangerous workpieces, rectifying working environment, and reasonably arranging working hours.

Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.

Intraoperative cell salvage (IOCS) has been widely applied as an important blood conservation measure in surgical operations. However, there is currently a lack of clinical practice guidelines for the implementation of IOCS in patients with malignant tumors. This report aims to provide clinicians with recommendations on the use of IOCS in patients with malignant tumors based on the review and assessment of the existed evidence. Data were derived from databases such as PubMed, Embase, the Cochrane Library and Wanfang. The guideline development team formulated recommendations based on the quality of evidence, balance of benefits and harms, patient preferences, and health economic assessments. This study constructed seven major clinical questions. The main conclusions of this guideline are as follows: 1) Compared with no perioperative allogeneic blood transfusion (NPABT), perioperative allogeneic blood transfusion (PABT) leads to a more unfavorable prognosis in cancer patients (Recommended); 2) Compared with the transfusion of allogeneic blood or no transfusion, IOCS does not lead to a more unfavorable prognosis in cancer patients (Recommended); 3) The implementation of IOCS in cancer patients is economically feasible (Recommended); 4) Leukocyte depletion filters (LDF) should be used when implementing IOCS in cancer patients (Strongly Recommended); 5) Irradiation treatment of autologous blood to be reinfused can be used when implementing IOCS in cancer patients (Recommended); 6) A careful assessment of the condition of cancer patients (meeting indications and excluding contraindications) should be conducted before implementing IOCS (Strongly Recommended); 7) Informed consent from cancer patients should be obtained when implementing IOCS, with a thorough pre-assessment of the patient's condition and the likelihood of blood loss, adherence to standardized internally audited management procedures, meeting corresponding conditions, and obtaining corresponding qualifications (Recommended). In brief, current evidence indicates that IOCS can be implemented for some malignant tumor patients who need allogeneic blood transfusion after physician full evaluation, and LDF or irradiation should be used during the implementation process.

Diabetes mellitus （DM） is a metabolic disease caused by absolute or relative insulin deficiency and reduced insulin sensitivity in peripheral cells， posing a serious threat to global health. Chronic complications arising in the later stages of DM can lead to the decline or even loss of function in multiple organs， including the eyes， heart， liver， kidneys， nerves， and feet， making them the primary cause of mortality in DM patients. Although modern medicine has made some progress in the treatment of these complications， challenges such as high costs and adverse drug reactions remain. Thus， identifying highly effective drugs with minimal adverse effects has become a top priority. Astragalus membranaceus is a shining gem in the treasure trove of Chinese medicine. Numerous studies have shown that its primary active component， astragaloside Ⅳ， possesses various biological activities， including anti-inflammatory， antioxidant， and antiviral effects， as well as benefits for cardiac and cerebral function， nerve conduction， and myocardial protection. Meanwhile， the phosphatidylinositol 3-kinase/protein kinase B （PI3K/Akt） signaling pathway plays a crucial role in regulating oxidative stress， inflammatory responses， apoptosis， and autophagy. Extensive research has highlighted the significant role of this pathway in various DM complications， leading to widespread studies on its interaction with astragaloside Ⅳ. This review summarizes research findings on how astragaloside Ⅳ alleviates pancreatic cytotoxicity in DM patients by modulating the PI3K/Akt pathway. Additionally， it highlights its protective effects on basic cardiac function， inhibition of retinal cell damage， improvement of cerebral nerve dysfunction， reduction of chronic kidney and liver damage， and mitigation of neurovascular toxicity in the lower limbs. These insights provide a valuable reference for the clinical application of A. membranaceus and its active monomer， astragaloside Ⅳ， in the treatment of DM and its complications.

Objective: To construct a scientific and perfect evaluation index system of infectious disease prevention and control ability in colleges and universities, so as to provide reference tools for colleges and universities to effectively respond to infectious disease. Methods: The initial framework of the evaluation index system of infectious disease prevention and control ability in colleges and universities was constructed by using literature analysis method. Experts familiar with infectious disease prevention and control or school health work were selected to conduct two rounds( n =16，18) of Delphi expert consultation for determining the evaluation index system. Analytical hierarchy process was used to calculate the index weights and combined weights. About 198 prevention and control personnel were conveniently selected from 3 universities in Inner Mongolia Autonomous Region to comprehensively evaluate the evaluation indicators by using fuzzy comprehensive evaluation method. Results: After two rounds of Delphi consultation questionnaire, the effective recovery rates were 80.0% and 90.0%, the expert authority levels were 0.89 and 0.86, the expert harmony coefficients for Kendall W were 0.166 and 0.310, and the variation coefficient of each index was <0.25. Finally, the evaluation index system of infectious disease prevention and control ability of colleges and universities included 4 first level indicators, 14 second level indicators and 75 third level indicators. The weights of prevention and monitoring and early warning, organizational system guarantee, emergency management, rehabilitation and summary were 0.176, 0.476, 0.268 and 0.080, respectively. The top 3 weights of the secondary indexes were 0.623 for infectious disease surveillance and early warning, 0.595 for loss assessment and 0.370 for emergency response. The score of fuzzy comprehensive evaluation of the index system of infectious disease prevention and control ability in colleges and universities was 79.148, suggesting a high level. Conclusion The established evaluation index system of infectious disease prevention and control ability in colleges and universities is scientific and reasonable, which is conducive to provide tool reference for the evaluation of infectious disease prevention and control ability in colleges and universities.

Objective To explore the relationship between PANoptosis and hepatic ischemia-reperfusion injury (HIRI), and to screen the key genes of PANoptosis in HIRI. Methods PANoptosis-related differentially expressed genes (PDG) were obtained through the Gene Expression Omnibus database and GeneCards database. Gene ontology (GO), Kyoto Encyclopedia of Genes and Genomes (KEGG), and Gene Set Enrichment Analysis (GSEA) were used to explore the biological pathways related to PDG. A protein-protein interaction network was constructed. Key genes were selected, and their diagnostic value was assessed and validated in the HIRI mice. Immune cell infiltration analysis was performed based on the cell-type identification by estimating relative subsets of RNA transcripts. Results A total of 16 PDG were identified. GO analysis showed that PDG were closely related to cellular metabolism. KEGG analysis indicated that PDG were mainly enriched in cellular death pathways such as apoptosis and immune-related signaling pathways such as the tumor necrosis factor signaling pathway. GSEA results showed that key genes were mainly enriched in immune-related signaling pathways such as the mitogen-activated protein kinase (MAPK) signaling pathway. Two key genes, DFFB and TNFSF10, were identified with high accuracy in diagnosing HIRI, with areas under the curve of 0.964 and 1.000, respectively. Immune infiltration analysis showed that the control group had more infiltration of resting natural killer cells, M2 macrophages, etc., while the HIRI group had more infiltration of M0 macrophages, neutrophils, and naive B cells. Real-time quantitative polymerase chain reaction results showed that compared with the Sham group, the relative expression of DFFB messenger RNA in liver tissue of HIRI group mice increased, and the relative expression of TNFSF10 messenger RNA decreased. Cibersort analysis showed that the infiltration abundance of naive B cells was positively correlated with DFFB expression (r=0.70, P=0.035), and the infiltration abundance of M2 macrophages was positively correlated with TNFSF10 expression (r=0.68, P=0.045). Conclusions PANoptosis-related genes DFFB and TNFSF10 may be potential biomarkers and therapeutic targets for HIRI.

ObjectiveTo investigate the association and translational mechanism between the hepatotoxicity of Xianling Gubao （XLGB） and its treatment of osteoporosis based on a zebrafish model. MethodsZebrafish were randomly selected four days after fertilization （4 dpf） and exposed to different concentrations of XLGB （0.7，0.35 mg·L^-1） for 96 h. At the endpoint of the exposure， the mortality rates of zebrafish in the treatment groups of different concentrations were counted， and the "dose-toxicity" curves were plotted. The 10% sublethal concentration （LC₁₀） was calculated. The liver area， acridine orange staining， and pathological tissue sections of transgenic zebrafish ［CZ16 （gz15Tg.Tg （fabp 10a： ds Red； ela31： EGFP）］ were used as indicators to confirm the hepatic damage caused by the sublethal concentration of XLGB. By using the prednisolone （PNSL）-induced osteoporosis model of zebrafish， the anti-osteoporosis activity of XLGB was evaluated by using the area of skull stained by alizarin red and the cumulative optical density value as indicators. Then， the toxicity difference of XLGB on the liver of zebrafish in healthy and osteoporotic states was compared， and the mechanism of the translational action of the toxicity of XLGB was predicted based on network pharmacology and real-time polymerase chain reaction（Real-time PCR）. ResultsThe LC₁₀ of XLGB on zebrafish （8 dpf） was 0.7 mg·L^-1. Compared with the blank group， the sublethal concentration （LC₁₀=0.7 mg·L^-1， 1/2 LC₁₀=0.35 mg·L^-1） of XLGB induced an increase in the number of apoptosis of hepatocytes in a dose-dependent manner， and the tissue arrangement of the liver was disordered and loose. The vacuoles were obvious， and the fluorescence area of the liver was significantly reduced （P<0.01）. Compared with the blank group， the mineralized area and cumulative optical density value of zebrafish skull in the PNSL model group were significantly reduced （P<0.01）， and those in the 0.7，0.35 mg·L^-1 XLGB treatment group were significantly increased compared with the model group （P<0.01）. Most importantly， 0.7 mg·L^-1 XLGB had no significant effect on the liver of zebrafish in the osteoporosis disease model compared with the blank group. The results of network pharmacology and real-time PCR experiments showed that the toxic transformation of XLGB might be related to the differences in the expression levels of key targets， such as tumor protein 53 （TP53）， cysteine aspartic acid specific protease-3（Caspase-3）， interleukin（IL）-6， and alkaline phosphatase（ALP） in different organismal states. ConclusionUnder certain conditions， XLGB has hepatotoxicity in normal zebrafish， but under osteoporotic conditions， XLGB not only exerts significant anti-osteoporosis activity but also alleviates hepatotoxicity significantly， which provides a reference for the safe clinical use of XLGB and real evidence for the theories of traditional Chinese medicine of attacking poison with poison and of treating disease with corresponding drugs without damage to the body.