OBJECTIVE: Using the mono-energy reconstruction images and X-ray films to investigate whether the ABG Ⅱ short-stem could improve the filling ratio, stability, and alignment in the Dorr type C femur, compared with the Corail long-stem. METHODS: Among patients who were with Dorr type C femurs and treated with total hip arthroplasty between January 2006 and March 2012, 20 patients with a Corail long-stem (Corail group) and 20 patients with an ABG Ⅱ short-stem (ABG Ⅱ group) were randomly selected. The differences in gender, age, body mass index, and preoperative diagnoses between the two groups were not significant ( P>0.05). The ABG Ⅱ group was with a mean follow-up of 142 months (range, 102-156 months), and the Corail group was with a mean follow-up of 107 months (range, 91-127 months). There was no significant difference in the Harris score and subjective satisfaction score between the two groups at last follow-up ( P>0.05). At last follow-up, dual-energy CT scans with mono-energy image reconstruction were used to calculate the prosthetic filling ratio and to measure the alignment of the prosthesis in the coronal and sagittal positions. Stability assessment was performed based on X-ray films, and the subsidence distance was measured using EBRA-FCA software. RESULTS: X-ray film observation showed that the prostheses in the two groups were stable and no signs of loosening was found. The incidence of pedestal sign was significantly lower in the ABGⅡ group than in the Corail group ( P<0.05), and the incidence of heterotopic ossification was significantly higher in the ABGⅡ group than in the Corail group ( P<0.05). The subsidence distance of femoral stem in ABG Ⅱ group was significantly greater than that in Corail group ( P<0.05), and the subsidence speed of femoral stem in ABG Ⅱ group was also greater than that in Corail group, but the difference was not significant ( P>0.05). The overall prosthesis filling ratio was significantly higher in the ABG Ⅱ group than in the Corail group ( P<0.05), while the coronal filling ratio at the lesser trochanter, 2 cm below the lesser trochanter, and 7 cm below the lesser trochanter were not significant ( P>0.05). The results of prosthesis alignment showed that there was no significant difference in the sagittal alignment error value and the incidence of coronal and sagittal alignment error >3° between the two groups ( P>0.05), while the coronal alignment error value in the ABG Ⅱ group was significantly greater than that in the Corail group ( P<0.05). CONCLUSION Although the ABG Ⅱ short-stem avoids the distal-proximal mismatch of the Corail long-stem in the Dorr type C femur and thus achieves a higher filling ratio, it does not appear to achieve better alignment or stability.
Humans ; Arthroplasty, Replacement, Hip/methods* ; Femur/surgery* ; Hip Prosthesis ; Lower Extremity/surgery* ; Prosthesis Design ; Retrospective Studies

BACKGROUND: There are few data comparing clinical outcomes of complex percutaneous coronary intervention (CPCI) when using biodegradable polymer drug-eluting stents (BP-DES) or second-generation durable polymer drug-eluting stents (DP-DES). The purpose of this study was to investigate the safety and efficacy of BP-DES and compare that with DP-DES in patients with and without CPCI during a 5-year follow-up. METHODS: Patients who exclusively underwent BP-DES or DP-DES implantation in 2013 at Fuwai Hospital were consecutively enrolled and stratified into two categories based on CPCI presence or absence. CPCI included at least one of the following features: unprotected left main lesion, ≥2 lesions treated, ≥2 stents implanted, total stent length >40 mm, moderate-to-severe calcified lesion, chronic total occlusion, or bifurcated target lesion. The primary endpoint was major adverse cardiac events (MACE) including all-cause death, recurrent myocardial infarction, and total coronary revascularization (target lesion revascularization, target vessel revascularization [TVR], and non-TVR) during the 5-year follow-up. The secondary endpoint was total coronary revascularization. RESULTS: Among the 7712 patients included, 4882 (63.3%) underwent CPCI. Compared with non-CPCI patients, CPCI patients had higher 2- and 5-year incidences of MACE and total coronary revascularization. Following multivariable adjustment including stent type, CPCI was an independent predictor of MACE (adjusted hazard ratio [aHR]: 1.151; 95% confidence interval [CI]: 1.017-1.303, P  = 0.026) and total coronary revascularization (aHR: 1.199; 95% CI: 1.037-1.388, P  = 0.014) at 5 years. The results were consistent at the 2-year endpoints. In patients with CPCI, BP-DES use was associated with significantly higher MACE rates at 5 years (aHR: 1.256; 95% CI: 1.078-1.462, P  = 0.003) and total coronary revascularization (aHR: 1.257; 95% CI: 1.052-1.502, P  = 0.012) compared with that of DP-DES, but there was a similar risk at 2 years. However, BP-DES had comparable safety and efficacy profiles including MACE and total coronary revascularization compared with DP-DES in patients with non-CPCI at 2 and 5 years. CONCLUSIONS Patients underwent CPCI remained at a higher risk of mid- to long-term adverse events regardless of the stent type. The effect of BP-DES compared with DP-DES on outcomes was similar in CPCI and non-CPCI patients at 2 years but had inconsistent effects at the 5-year clinical endpoints.
Humans ; Drug-Eluting Stents/adverse effects* ; Myocardial Infarction/complications* ; Polymers/therapeutic use* ; Treatment Outcome ; Coronary Artery Disease/complications* ; Percutaneous Coronary Intervention/adverse effects* ; Absorbable Implants ; Prosthesis Design

OBJECTIVE: To compare the long-term follow-up effect and complications of ceramic on ceramic (CoC) interface and ceramic on polyethyleneon ceramic (CoP) interface in primary total hip arthroplasty, and provide clinical evidence. METHODS: Search PubMed, EMBase, the CoChrane Library databases, Web of science, Wanfang database, and CNKI from January 2000 to September 2021, screening and inclusion of randomized controlled trials (RCTs) comparing the long-term efficacy and complications of CoC interface and CoP interface in total hip arthroplasty. Literature screening, quality evaluation and data extraction were carried out according to the inclusion and exclusion criteria, using Review Manager 5.3 statistical software. The software was used to perform statistical analysis on joint function, revision, prosthesis fracture, abnormal joint noise, and prosthesis wear rate after CoC or CoP. RESULTS: Seven RCTs studies were included, including 390 cases of hips with CoC artificial joints and 384 cases of hips with CoP artificial joints. The long-term joint function improvement of CoC and CoP artificial joints was similar and there was no significant differences, with an average difference was MD=0.63, 95%CI=(-1.81, 3.07), P=0.61. About the postoperative complications, CoC artificial joints have higher incidence rate of abnormal joint noise, with odds ratio (OR)=11.05, 95%CI=(2.04, 59.84), P=0.005. CoP artificial joints wear faster, with an average MD=-87.11, 95%CI=(-114.40, -59.82), P<0.000 1. There was no significant difference between the two groups in the replacement-related complications such as joint dislocation, prosthesis loosening, osteolysis, and the rate of prosthesis revision caused by various reasons. CONCLUSION The clinical function results and complications of CoC artificial joints are comparable to those of CoP artificial joints. Although CoP artificial joint prosthesis has a faster wear rate, it does not affect joint function and increase complications, and there is no abnormal joint noise. CoC is expensive and the long-term efficacy is equivalent to CoP. Clinicians should consider cost performance when choosing CoC.
Humans ; Arthroplasty, Replacement, Hip/methods* ; Hip Prosthesis ; Follow-Up Studies ; Prosthesis Design ; Polyethylene ; Prosthesis Failure ; Reoperation ; Ceramics ; Treatment Outcome

OBJECTIVE: To predict the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training based on the modified Wright learning curve model, then to analyze and applicate the learning curve. METHODS: Twelve graduate students participating in standardized dental resident training were selected to prepare the resin maxillary central incisors on phantom head simulators for all ceramic crowns 4 times. The results of preparation were evaluated by 3 prosthetic experts with at least 10 years' experience focusing on the reduction, contour, taper, shoulder, finish line, margin placement, adjacent tooth injury, and preparation time for tooth preparation. The learning rate of tooth preparation was calculated by scores of tooth preparation of 4 times. The learning curve of tooth preparation was predicted based on the modified Wright learning curve model. According to the criteria of standardized training skill examinations for dental residents in Beijing, 80 was taken as the qualified standard score. The minimum training times for tooth preparation to satisfy the qualified standard score (80) was calculated, to analyze the characteristics of learning curve and evaluate the effectiveness of tooth preparation. RESULTS: The scores of 4 tooth preparation were 64.03±7.80, 71.40±6.13, 74.33±5.96, and 75.98±4.52, respectively. The learning rate was (106±4)%, which showed the learning curve an upward trend. There were no significant differences between the qualified standard score and the predicted scores of tooth preparation from the 5^th preparation to the 13^th preparation (P > 0.05). The predicted score of the 14^th preparation was higher than the qualified standard score (P < 0.05). CONCLUSION The trend of the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training is upward, which predicts the minimum training times higher than the qualified standard score is 14 times.
Humans ; Tooth Preparation, Prosthodontic/methods* ; Incisor ; Learning Curve ; Crowns ; Tooth Preparation ; Ceramics ; Dental Porcelain ; Dental Prosthesis Design

Three different preclinical evaluation methods of MTF through-frequency response, MTF through-focus-response and expected visual acuity were used to compare and analyze the imaging differences of IOLs with four different optical designs. The research work could be used in the simultaneous vision IOLs in the optical design stage and verify the optical quality of the IOLs, the results can predict the visual representation of the patients better. The evaluation results can provide reference for IOL manufacturers and users in product design, development, validation and application selection.
Humans ; Prosthesis Design ; Lenses, Intraocular ; Vision, Ocular ; Visual Acuity

The ossicular replacement prosthesis should have good biocompatibility, stability, easy to install, and excellent sound transmission capacity. In this study, the characteristics of ideal materials for the ossicular replacement prosthesis were analyzed by searching the types of materials used in clinical practice and comparing the advantages and disadvantages of various materials and structures. At the same time, in combination with the current evaluation requirements and evaluation experience, the focus of the performance research project of ossicular replacement prosthesis in the process of registration is discussed to clarify the performance evaluation requirements of these products, so as to provide reference for the future work of manufacturers and regulators. The performance evaluation of ossicular replacement prosthesis focuses on its mechanical properties, fixation stability, sound transmission characteristics, biological characteristics, and magnetic resonance compatibility.
Ossicular Prosthesis ; Ossicular Replacement ; Sound ; Prosthesis Design ; Treatment Outcome

Objective: To explore the indications and management of common postoperative complications of phase II tracheoesophageal puncture (TEP) for Provox Vega voice prosthesis after total laryngectomy. Methods: The clinical data of 20 patients undergoing phase II TEP for Provox Vega voice prosthesis in our hospital between May 2021 and January 2022 were analyzed. Among them, there were 19 males and 1 female, aged from 37 to 76 years, with an average age of (60.0±8.4)years. The surgical indications and the prevention and treatment of common postoperative complications were summarized. Descriptive analysis was used in this research. Results: The basic surgical indications were as following: after total laryngectomy, there was no stenosis of the stoma and esophagus entrance, no scar constitution, no mouth opening restriction, no stiffness and backward restraint of the neck after radiotherapy, and more than half a year apart surgery or radiotherapy. Among the 20 patients, 18 underwent implantation successfuly, 1 failed in the operation, and for 1 patient, the prosthesis was removed due to bleeding 1 week after implantation. The common postoperative complications included TEP fistula infection (2 cases), the TEP fistula bleeding(1 case), deep neck (prevertebral) abscess (1 case), granulation at the inner side of the TEP fistula (1 case), invagination of the prosthesis (2 cases) and leakage around the prosthesis (2 cases). All patients were cured with different interventions. Conclusions: The Provox Vega voice prosthesis is generally safe for phase Ⅱ implantatione, but implantation indications need to be established. Common postoperative complications can be solved through preventive and remedial interventions.
Male ; Humans ; Female ; Larynx, Artificial/adverse effects* ; Laryngectomy/adverse effects* ; Prosthesis Implantation/adverse effects* ; Esophagus/surgery* ; Postoperative Complications/etiology* ; Prosthesis Design

The minimally invasive fixed occlusal reconstruction of dentition defect is a sequential reconstruction process involving the minimally invasive restoration of the remaining natural teeth, the implant restoration of edentulous areas and the occlusal change from reversible to non-reversible. The simultaneous completion of minimally invasive natural teeth restorations and implant-supported crowns or bridges in an ideal occlusal design shows the obvious advantages of digital integration. The use of digital technologies such as intraoral scanning, kinematic face bow, virtual articulator and computer aided design and computer aided manufacturing (CAD/CAM), could be integrated in each stage of occlusal reconstruction, including the overall documentations and assessments before the restoration, the determination of the functional restoration space, the precise design and fabrication of the provisional and final restorations taking into account both esthetics and function and the preservation of the follow-up documentations and assessments after the restoration. The integration process can optimize clinical process and improve restoration accuracy. This article briefly describes the concept of minimally invasive occlusal reconstruction of dentition defects and the integration strategy of digital sequential restoration.
Humans ; Dentition ; Dental Implants ; Esthetics, Dental ; Mouth, Edentulous ; Computer-Aided Design ; Crowns ; Dental Prosthesis Design

Objective: To evaluate the clinical outcomes of computer aided design and computer aided manufacturing (CAD/CAM) ceramic endocrowns in endodontically treated posterior teeth after five years by a retrospective study. Methods: Patients who received CAD/CAM ceramic endocrowns after endodontically treatment in Department of Endodontics, School of Stomatology, The Fourth Military Medical University between January 2016 and June 2017 were invited for this clinical study. Clinical performance was evaluated in the aspect of color match, anatomic form,marginal adaptation, restoration integrity and secondary caries. Survival rate of the restorations was calculated by the use of Kaplan-Meier method. Log-rank test was applied as well for the sake of analyzing the effect of tooth position, sex and materials to the survival rate of the restorations. Results: Seventy-four patients, 25 men and 49 women with age of (38.8±10.2) years, participated in this study for a total of 101 CAD/CAM ceramic endocrowns after observation period of (62.8±12.0) months. There were 8 failed cases among 101 restorations, 5 were loss of retention, 2 were ceramic fracture and 1 was secondary caries respectively. In particular, 93% (89/96) restorations got score A on anatomic form and 95% (91/96) restorations got score A on marginal adaptation, while 38% (36/96) restorations showed the good color match compared with the abutment teeth. The estimated cumulative survival rate of CAD/CAM ceramic endocrowns in endodontically treated posterior teeth after 5 years was 93.0% (95%CI: 87.9%-98.1%). The single-factor Log-rank analysis demonstrated that there was no statistically significant difference in the survival rate of CAD/CAM ceramic endocrowns among men and women, premolars and molars, position in the dental arch, or different materials (χ²<0.01, P=0.957; χ²=0.64, P=0.422; χ²=0.69, P=0.407; χ²=0.88, P=0.349). Conclusions: Based on this clinical study, the clinical performance of CAD/CAM ceramic endocrowns in endodontically treated posterior teeth after five years is reliable, which could be a general option to restore nonvital teeth.
Humans ; Male ; Female ; Adult ; Middle Aged ; Crowns ; Dental Porcelain/therapeutic use* ; Retrospective Studies ; Dental Prosthesis Design ; Dental Stress Analysis ; Materials Testing ; Computer-Aided Design ; Ceramics

INTRODUCTION: Data on patients with small aortic annuli (SAA) undergoing transcatheter aortic valve implantation (TAVI) are limited. We aim to describe the impact of aortic annular size, particularly SAA and TAVI valve type on valve haemodynamics, durability and clinical outcomes. METHOD: All patients in National Heart Centre Singapore who underwent transfemoral TAVI for severe symptomatic native aortic stenosis from July 2012 to December 2019 were included. Outcome measures include valve haemodynamics, prosthesis-patient mismatch (PPM), structural valve degeneration (SVD) and mortality. RESULTS: A total of 244 patients were included. The mean Society of Thoracic Surgeons score was 6.22±6.08, with 52.5% patients with small aortic annulus (<23mm), 33.2% patients with medium aortic annulus (23-26mm) and 14.3% patients with large aortic annulus (>26mm). There were more patients with self-expanding valve (SEV) (65.2%) versus balloon-expandable valve (BEV) (34.8%). There were no significant differences in indexed aortic valve area (iAVA), mean pressure gradient (MPG), PPM, SVD or mortality across all aortic annular sizes. However, specific to the SAA group, patients with SEV had larger iAVA (SEV 1.19±0.35cm2/m2 vs BEV 0.88±0.15cm2/m2, P<0.01) and lower MPG (SEV 9.25±4.88 mmHg vs BEV 14.17±4.75 mmHg, P<0.01) at 1 year, without differences in PPM or mortality. Aortic annular size, TAVI valve type and PPM did not predict overall mortality up to 7 years. There was no significant difference in SVD between aortic annular sizes up to 5 years. CONCLUSION Valve haemodynamics and durability were similar across the different aortic annular sizes. In the SAA group, SEV had better haemodynamics than BEV at 1 year, but no differences in PPM or mortality. There were no significant differences in mortality between aortic annular sizes, TAVI valve types or PPM.
Humans ; Transcatheter Aortic Valve Replacement ; Heart Valve Prosthesis ; Aortic Valve Stenosis/surgery* ; Aortic Valve/surgery* ; Prosthesis Design ; Postoperative Complications/surgery* ; Treatment Outcome ; Hemodynamics