A molecular diagnostic assay which could be stored at room temperature was developed to rapidly detect Mycobacterium tuberculosis (MTB) based on loop-mediated isothermal amplification (LAMP) technology and dry-reagent process. LAMP uses 4 or 6 primers and Bst DNA polymerase to amplify DNA at a constant temperature. The results showed that the LAMP assay could detect the amplification of IS6110 target gene within 20 min using real-time fluorescence signal detection. The sensitive of LAMP assay was similar to the PCR technology while the precision of PCR was better than LAMP (coefficient of variation, LAMP 18.9%, PCR 3.4%), meaning LAMP was more suitable for qualitative detection. The LAMP assay did not amplify DNA of other 10 types of pathogens, including Neisseria meningitidis, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pneumoniae, Rubivirus, mumps virus, adenovirus (type 3), adenovirus (type 7), respiratory syncytial virus B and parainfluenza virus type 2, indicating a good specificity. Furthermore, a dry-reagent assay was developed using air-drying and freeze-drying process. The performance of dried reagents did not change after 10 days storage at 50 ℃, meaning the dried reagents could be stored at room temperature (25 ℃) for more than six months. The dry-reagent LAMP assay also successfully amplified MTB DNA from several clinical samples within 20 min. In conclusion, the developed LAMP assay together with isothermal amplifier could rapidly detection MTB.
Humans ; Mycobacterium tuberculosis/genetics* ; Indicators and Reagents ; Sensitivity and Specificity ; Nucleic Acid Amplification Techniques/methods* ; DNA

This study aimed to develop a portable, accurate and easy-to-operate scheme for rapid detection of respiratory virus nucleic acid. Quantitative real-time polymerase chain reaction (qRT-PCR) was used to verify the effect of extraction-free respiratory virus treatment reagent (RTU) on viral nucleic acid treatment and the effect of ultra-fast fluorescence quantitative PCR instrument (FQ-8A) on nucleic acid amplification, respectively. RTU and FQ-8A were combined to develop a rapid detection scheme for respiratory virus nucleic acid, and the positive detection rate was judged by C_t value using a fluorescence quantitative PCR instrument, and the accuracy of the scheme in clinical samples detection was investigated. The results showed that RTU had comparable sensitivity to the automatic nucleic acid extraction instrument, its extraction efficiency was comparable to the other 3 extraction methods when extracting samples of different virus types, but the extraction time of RTU was less than 5 min. FQ-8A had good consistency in detection respiratory syncytial virus (RSV) and adenovirus (ADV) compared with the control instrument ABI-7500, with kappa coefficients of 0.938 (P < 0.001) and 0.887 (P < 0.001), respectively, but the amplification time was only about 0.5 h. The RTU and FQ-8A combined rapid detection scheme had a highly consistent detection rate with the conventional detection scheme, with a sensitivity of 91.70% and specificity of 100%, and a kappa coefficient was 0.944 (P < 0.001). In conclusion, by combining RTU with FQ-8A, a rapid respiratory virus nucleic acid detection scheme was developed, the whole process could be completed in 35 min. The scheme is accurate and easy-to-operate, and can provide important support for the rapid diagnosis and treatment of respiratory virus.
Humans ; Respiratory Syncytial Virus Infections/diagnosis* ; Respiratory Syncytial Virus, Human/genetics* ; Nucleic Acid Amplification Techniques ; Real-Time Polymerase Chain Reaction ; Adenoviridae ; Sensitivity and Specificity

Artemisia stolonifera is a relative of A. argyi. The two species are difficult to be distinguished due to the similarity in leaf shape and have even less distinctive features after processing. This study aims to establish a method to quickly distinguish between them. At the same time, we examined the reasonability and applicability of the specific polymerase chain reaction(PCR) method. The C/T single nucleotide polymorphism was detected at the position 202 of the sequence, based on which specific primers were designed to identify these two species. The PCR with the specific primer JNC-F and the universal primer ITS3R produced a specific band at 218 bp for A. argyi and no band for A. stolonifera, which can be used to detect at least 3% of A. argyi samples mixed in A. stolonifera samples. The PCR with the specific primer KY-F and the universal primer ITS3R produced a specific band at 218 bp for A. stolonifera and no band for A. argyi, which can be used to detect at least 5% of A. stolonifera samples mixed with A. argyi. The limit of detection of the established method was 5 ng DNA. The established PCR method can accurately distinguish between A. stolonifera and A. argyi, which provides an experimental basis for the quality control of A. stolonifera and determines whether the herbs are adulterated.
Artemisia/genetics* ; Trichomes ; Polymerase Chain Reaction ; Nucleic Acid Amplification Techniques ; Plant Leaves/genetics*

A molecular diagnostic assay which could be stored at room temperature was developed to rapidly detect Mycobacterium tuberculosis (MTB) based on loop-mediated isothermal amplification (LAMP) technology and dry-reagent process. LAMP uses 4 or 6 primers and Bst DNA polymerase to amplify DNA at a constant temperature. The results showed that the LAMP assay could detect the amplification of IS6110 target gene within 20 min using real-time fluorescence signal detection. The sensitive of LAMP assay was similar to the PCR technology while the precision of PCR was better than LAMP (coefficient of variation, LAMP 18.9%, PCR 3.4%), meaning LAMP was more suitable for qualitative detection. The LAMP assay did not amplify DNA of other 10 types of pathogens, including Neisseria meningitidis, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pneumoniae, Rubivirus, mumps virus, adenovirus (type 3), adenovirus (type 7), respiratory syncytial virus B and parainfluenza virus type 2, indicating a good specificity. Furthermore, a dry-reagent assay was developed using air-drying and freeze-drying process. The performance of dried reagents did not change after 10 days storage at 50 ℃, meaning the dried reagents could be stored at room temperature (25 ℃) for more than six months. The dry-reagent LAMP assay also successfully amplified MTB DNA from several clinical samples within 20 min. In conclusion, the developed LAMP assay together with isothermal amplifier could rapidly detection MTB.
Humans ; Mycobacterium tuberculosis/genetics* ; Indicators and Reagents ; Sensitivity and Specificity ; Nucleic Acid Amplification Techniques/methods* ; DNA

The aim of this study was to construct a simple, rapid and ultra-sensitive optical biosensing technique based on rolling circle amplification (RCA), and to apply it to multiple detection of drug-resistant genes of mycobacterium tuberculosis. The common mutation sites of isoniazid, rifampicin and streptomycin resistance genes are katG315 (AGC➝ACC), rpoB531 (CAC➝TAC) and rpsL43 (AAG➝AGG). For these three gene sites, from February 2020 to May 2021, in the Department of Laboratory Medicine of the First Affiliated Hospital of Army Military Medical University, the padlock probe (PLP), primers and capture probes were designed. And a solid-phase RCA constant temperature amplification reaction system based on magnetic beads was constructed and the experimental parameters were optimized. The RCA products were accurately captured by the multicolor fluorescent probes (Cy3/Cy5/ROX), and the single-tube multiple detection of three mutation genes was realized. The sensitivity, specificity and linear range of this method were further verified. The results showed that the response range of katG315 in the same reaction system ranged from 1.0 pmol/L to 0.1 nmol/L. The response range of rpoB531 and rpsL43 ranged from 1.0 pmol/L to 50.0 pmol/L and 1.0 pmol/L to 20.0 pmol/L, and the method had good specificity and sensitivity, and could accurately identify single base mutations in mixed targets, with the minimum detection limit as low as 1.0 pmol/L. The recoveries of simulated serum samples were 95.0%-105.2%. In conclusion, the constant temperature amplification multiple detection method constructed in this study can quickly realize the single-tube multiple detection of three drug resistance mutation sites. This technology is low-cost, simple and rapid, and does not rely on large equipment, providing a new analysis method for pathogen drug resistance gene detection.
Drug Resistance ; Fluorescent Dyes ; Humans ; Mycobacterium tuberculosis/genetics* ; Nucleic Acid Amplification Techniques

OBJECTIVE: To establish a sensitive, simple and rapid detection method for African swine fever virus (ASFV) B646L gene. METHODS: A recombinase-aided amplification-lateral flow dipstick (RAA-LFD) assay was developed in this study. Recombinase-aided amplification (RAA) is used to amplify template DNA, and lateral flow dipstick (LFD) is used to interpret the results after the amplification is completed. The lower limits of detection and specificity of the RAA assay were verified using recombinant plasmid and pathogenic nucleic acid. In addition, 30 clinical samples were tested to evaluate the performance of the RAA assay. RESULTS: The RAA-LFD assay was completed within 15 min at 37 °C, including 10 min for nucleic acid amplification and 5 minutes for LFD reading results. The detection limit of this assay was found to be 200 copies per reaction. And there was no cross-reactivity with other swine viruses. CONCLUSION A highly sensitive, specific, and simple RAA-LFD method was developed for the rapid detection of the ASFV.
African Swine Fever/virology* ; African Swine Fever Virus/isolation & purification* ; Animals ; Nucleic Acid Amplification Techniques/methods* ; Recombinases/chemistry* ; Sensitivity and Specificity ; Swine ; Viral Proteins/genetics*

Polymerase chain reaction (PCR) is the gold standard for nucleic acid amplification in molecular diagnostics. The PCR includes multiple reaction stages (denaturation, annealing, and extension), and a complicated thermalcycler is required to repetitively provide different temperatures for different stages for 30-40 cycles within at least 1-2 hours. Due to the complicated devices and the long amplification time, it is difficult to adopt conventional PCR in point-of-care testing (POCT). Comparing to conventional PCR, isothermal amplification is able to provide a much faster and more convenient nucleic acid detection because of highly efficient amplification at a constant reaction temperature provided by a simple heating device. When isothermal amplification is combined with microfluidics, a more competent platform for POCT can be established. For example, various diagnosis devices based on isothermal amplification have been used to rapidly and conveniently detect SARS-CoV-2 viruses. This review summarized the recent development and applications of the microfluidics-based isothermal amplification. First, different typical isothermal amplification methods and related detection methods have been introduced. Subsequently, different types of microfluidic systems with isothermal amplification were discussed based on their characteristics, for example, functionality, system structure, flow control, and operation principles. Furthermore, detection of pathogens (e.g. SARS-CoV-2 viruses) based on isothermal amplification was introduced. Finally, the combination of isothermal amplification with other new technologies, e.g. CRISPR, has been introduced as well.
COVID-19/diagnosis* ; Humans ; Microfluidics ; Nucleic Acid Amplification Techniques ; Polymerase Chain Reaction ; SARS-CoV-2/genetics*

Animals ; Biological Assay ; Nucleic Acid Amplification Techniques ; Phlebovirus/isolation & purification* ; Psychodidae/virology* ; Recombinases/metabolism* ; Reverse Transcription

Objective: To establish an ultra-sensitive, ultra-fast, visible detection method for Vibrio parahaemolyticus (VP) . Methods: We established a new method for detecting the tdh and trh genes of VP using clustered regularly interspaced short palindromic repeats/CRISPR-associated protein 12a (CRISPR/Cas12a) combined with recombinase polymerase amplification and visual detection (CRISPR/Cas12a-VD). Results: CRISPR/Cas12a-VD accurately detected target DNA at concentrations as low as 10 ^-18 M (single molecule detection) within 30 min without cross-reactivity against other bacteria. When detecting pure cultures of VP, the consistency of results reached 100% compared with real-time PCR. The method accurately analysed pure cultures and spiked shrimp samples at concentrations as low as 10 ² CFU/g. Conclusion The novel CRISPR/Cas12a-VD method for detecting VP performed better than traditional detection methods, such as real-time PCR, and has great potential for preventing the spread of pathogens.
CRISPR-Cas Systems ; Nucleic Acid Amplification Techniques/methods* ; Recombinases/genetics* ; Vibrio parahaemolyticus/genetics*

Objective: To evaluate multidrug resistant loop-mediated isothermal amplification (MDR-LAMP) assay for the early diagnosis of multidrug-resistant tuberculosis and to compare the mutation patterns associated with the Methods: MDR-LAMP assay was evaluated using 100 Results: The sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of MDR-LAMP were 85.5%, 93.6%, 96.7%, and 74.4% for the detection of resistance to isoniazid and rifampicin, respectively, and 80.5%, 92.3%, 98.6%, and 41.4% for the detection of Conclusion MDR-LAMP is a rapid and accessible assay for the laboratory identification of rifampicin and isoniazid resistance of
Antitubercular Agents ; Bacterial Proteins/genetics* ; Catalase/genetics* ; DNA, Bacterial/analysis* ; DNA-Directed RNA Polymerases/genetics* ; Drug Resistance, Multiple, Bacterial/genetics* ; Isoniazid ; Molecular Diagnostic Techniques/methods* ; Mutation ; Mycobacterium tuberculosis/isolation & purification* ; Nucleic Acid Amplification Techniques/methods* ; Oxidoreductases/genetics* ; Phenotype ; Rifampin ; Whole Genome Sequencing