Objective:To explore the application effects of the goal-oriented teaching method based on mind mapping in the teaching of stomatology practical courses.Methods:From September 2022 to September 2023, 52 fourth-year students of clinical stomatology at Harbin Medical University were divided into test group and control group for practical teaching, with 26 cases in each group. The test group received goal-oriented teaching based on mind mapping, while the control group received traditional teaching, for 20 class hours in both groups. The two groups were compared in terms of general data, theoretical and practical assessment scores, the score of the self-rating scale of self-directed learning (SRSSDL) and the score of critical thinking disposition inventory-Chinese version (CTDI-CV) before and after training, and student satisfaction with teaching activities. SPSS 25.0 software was used to perform the t-test or χ2 test. Results:After completing the practical training courses, the test group showed significantly higher scores than the control group in multiple-choice questions [(16.85±1.39) vs. (15.33±2.21)], fill-in-the-blank questions [(17.21±1.98) vs. (16.01±2.02)], short answer questions [(17.47±2.27) vs. (15.23±2.45)], case analysis [(34.36±2.79) vs. (32.57±3.02)], and practical assessment [(84.69±4.73) vs. (80.57±4.21)] (all P<0.05). The SRSSDL score and CTDI-CV score were improved in both groups, and were significantly higher in the test group [(215.29±10.42) and (357.49±17.80)] than in the control group [(200.23±11.42) and (342.23±17.26)] (both P<0.05). The students of the test group were significantly more satisfied with teaching activities than those of the control group ( P<0.05). Conclusions:Compared with the traditional teaching method, the goal-oriented teaching method based on mind mapping is more effective in stomatology practical teaching, which can improve students' self-directed learning ability and critical thinking ability, promote their mastery of theoretical knowledge, enhance their clinical practice ability, and increase their satisfaction with teaching activities.

Objective To explore the effect of Morinda citrifolia juice(MCJ)combined with ethylene diamine tet-raacetic acid(EDTA)on premolar bonding strength and nanoleakage and compare the results with those of the most commonly used root canal irrigation solution,sodium hypochlorite(NaClO),to provide a reference for clinical applica-tion.Methods This study was approved by the ethics review committee.Sixty-three human premolars extracted for orthodontic treatment were randomly divided into a control group(distilled water group)and 6 experimental groups ac-cording to the different rinsing solutions used after the surface enamel was removed.The experimental groups included Group A(2.5%NaClO),Group B(5.25%NaClO),Group C(6%MCJ),Group D(2.5%NaClO-17%EDTA),Group E(5.25%NaClO-17%EDTA),and Group F(6%MCJ-17%EDTA)(n = 9).After soaking in the corresponding rinsing so-lution for 20 minutes,they were layered and stacked on their surfaces to form 4 mm×4 mm×3 mm Z350 resin blocks.Six samples from each group were cut into 1 mm×1 mm×8 mm specimen strips for microtensile bonding strength test-ing.The fracture type was determined under a stereomicroscope,and the remaining 3 samples from each group were aged and cut into 1 mm thick slices for interface nanoleakage testing and scanning electron microscopy observation of the resin dentin bonding interface.Results There were significant differences in the microtensile bonding strength among the groups(P＜0.05),and the control group had the highest bonding strength.Among experimental groups,Group B had the lowest bonding strength,mainly bonding interface fracture,and Group F had the highest bonding strength,mainly mixed fracture.There were significant differences in nanoleakage among all groups(P＜0.05),and the control group had the lowest nanoleakage value.Among experimental groups,Group B had the highest nanoleakage,with resin protrusions being unaltered,and Group F had the lowest nanoleakage value,with resin protrusions being thick and dense.Conclusion The higher the concentration of NaClO was,the worse the bonding strength and edge sealing of the crown dentin were.The effects of root canal irrigation with MCJ and EDTA on the adhesive strength and edge sealing of crown dentin were less pronounced than those of root canal irrigation with NaClO and EDTA.

Dental Caries is a kind of chronic oral disease that greatly threaten human being's health. Though dentists and researchers struggled for decades to combat this oral disease, the incidence and prevalence of dental caries remain quite high. Therefore, improving the disease management is a key issue for the whole population and life cycle management of dental caries. So clinical difficulty assessment system of caries prevention and management is established based on dental caries diagnosis and classification. Dentists should perform oral examination and establish dental records at each visit. When treatment plan is made on the base of caries risk assessment and carious lesion activity, we need to work out patient‑centered and personalized treatment planning to regain oral microecological balance, to control caries progression and to restore the structure and function of the carious teeth. And the follow-up visits are made based on personalized caries management. This expert consensus mainly discusses caries risk assessment, caries treatment difficulty assessment and dental caries treatment plan, which are the most important parts of caries management in the whole life cycle.
Consensus ; Dental Care ; Dental Caries/prevention & control* ; Humans ; Prevalence

For adapting to the change of modern medical model and suiting social demand of high quality dentists, this paper compares the differences of undergraduate education in stomatology between China and Russia by using the method of Bereday comparative education, trying to provide some reference for the reform of Chinese stomatology education. Curriculum arrangement in China is being constantly explored based on the Russian model. In China, courses are divided into basic medicine, clinical medicine and stomatology in three stages, making students relatively passive in learning. And the ratio of practice to lecture is far more higher in Russia than that in China. Thus, it's necessary to optimize structure and balance the distribution of stomatological curriculum in China, improve and popularize learning models such as problem -based learning (PBL) and so on, so as to promote the development of stomatology education of China to a higher level.

Objective: To study the computational fluid dynamics (CFD) characteristics of ultrasonic root canal irrigation when the file was placed at a certain depth in the root canal, to provide a reference for clinical application. Methods : First, scanning laser vibrometry (SLV) was utilized to analyze the characteristics of vibrational ultrasonic files under specific power. Then ICEM CFD 18.0 software was used to establish the root canal ultrasonic irrigation model. The insertion position of the ultrasonic working tip was set 1 mm away from the physiological apical foramen, and cloud images of the results were obtained by FLUENT 18.0 software. Volume fraction, flow velocity and pressure in the root canal were evaluated after setting the computing conditions. Results: The vibration of the ultrasonic working tip was mainly transverse vibration with slight longitudinal vibration. The amplitude of transverse vibration of each part of the working tip was different. Maximum values were observed at the apical end area of the file, and the closer to the base of the file, the smaller the amplitude. The area where the cavitation volume fraction of the rinsing fluid was greater than 0 was concentrated around the working point. The flow rate of the irrigating fluid was up to 2 m/s, within the area 0.2 mm in front of the working tip, the velocity of the irrigating fluid was greater than 0.1 m/s, while within the area 0.8 mm from the root tip, the velocity of the irrigating fluid was small or even zero. The apical pressure value was non-positive when the tip of the file was 1 mm away from the apical foramen in this model. Conclusion Based on the experimental results, it appears that when the ultrasonic working tip was placed 1 mm short of the working length, the ultrasonic irrigating flow did not overflow the root apical foramen and the irrigation process was relatively safe; the irrigation fluid had a strong irrigation effect within approximately 0.2 mm in front of the working tip.

Objective: To investigate the effects of graphene on the proliferation, migration and cell morphology of dental pulp stem cells (DPSCs). Methods: Graphene powder was prepared by the oxidation-reduction method, and a 0.5 mg/mL graphene dispersion was prepared. Raman spectroscopy and atomic force microscopy were used to characterize the structure and surface morphology of graphene. DPSCs were isolated and cultured in vitro. MTT assay was used to detect the effects of different concentrations of graphene dispersions (0, 1, 5, 10, 20, 50, 100 μg/mL) on the proliferation and wound healing assay was used to detected the migration abilities of DPSCs. The effects of graphene on the morphology of DPSCs were observed by immunofluorescence staining. Results : In the present study, compared with the control group (0 μg/mL), the proliferation of DPSCs in the 100 μg/mL group was inhibited at 72 h (P < 0.05), and the proliferation of DPSCs in the other groups was not significantly affected (P > 0.05). Graphene dispersions at 10 and 20 μg/mL promoted the migration of DPSCs (P < 0.05). After being cultured in 20 μg/mL graphene dispersions for 3 days, the DPSCs showed a large and orderly cytoskeletal structure, and the spread area of cells was not significantly different from that of the control group (0 μg/mL) (P > 0.05), while some cells had the morphological characteristics of nerve cells. Conclusion Graphene has good biocompatibility and is expected to be a suitable material for tissue engineering within fitting concentration.

Medication-related osteonecrosis of the jaw (MRONJ) is a serious side effect of bone-modifying agents and inhibits angiogenesis agents. Although the pathogenesis of MRONJ is not entirely clear, multiple factors may be involved in specific microenvironments. The TGF-β1 signalling pathway may have a key role in the development of MRONJ. According to the clinical stage, multiple variables should be considered when selecting the most appropriate treatment. Therefore, the prevention and management of treatment of MRONJ should be conducted in patient-centred multidisciplinary team collaborative networks with oncologists, dentists and dental specialists. This would comprise a closed responsibility treatment loop with all benefits directed to the patient. Thus, in the present review, we aimed to summarise the pathogenesis, risk factors, imaging features, clinical staging, therapeutic methods, prevention and treatment strategies associated with MRONJ, which may provide a reference that can inform preventive strategies and improve the quality of life for patients in the future.
Bisphosphonate-Associated Osteonecrosis of the Jaw/prevention & control* ; Bone Density Conservation Agents/adverse effects* ; Humans ; Quality of Life ; Risk Factors

Collectively migrating tumor cells have been recently implicated in enhanced metastasis of epithelial malignancies. In oral squamous cell carcinoma (OSCC), v integrin is a crucial mediator of multicellular clustering and collective movement ; however, its contribution to metastatic spread remains to be addressed. According to the emerging therapeutic concept, dissociation of tumor clusters into single cells could significantly suppress metastasis-seeding ability of carcinomas. This study aimed to investigate the anti-OSCC potential of novel endostatin-derived polypeptide PEP06 as a cluster-dissociating therapeutic agent . Firstly, we found marked enrichment of v integrin in collectively invading multicellular clusters in human OSCCs. Our study revealed that metastatic progression of OSCC was associated with augmented immunostaining of v integrin in cancerous lesions. Following PEP06 treatment, cell clustering on fibronectin, migration, multicellular aggregation, anchorage-independent survival and colony formation of OSCC were significantly inhibited. Moreover, PEP06 suppressed v integrin/FAK/Src signaling in OSCC cells. PEP06-induced loss of active Src and E-cadherin from cell-cell contacts contributed to diminished collective migration of OSCC . Overall, these results suggest that PEP06 polypeptide 30 inhibiting v integrin/FAK/Src signaling and disrupting E-cadherin-based intercellular junctions possesses anti-metastatic potential in OSCC by acting as a cluster-dissociating therapeutic agent.

Objective: To investigate the effect of self-etching adhesive with different unsealing time on the microleakage of the adhesive interface between tooth and resin. Methods: Unopened self-etching adhesives, Scotchbond Universal (S) and Xeno V+ (X) were respectively used to adhere Z350 resin for restoration of the prepared occlusal cavities sized 4 mm × 4 mm × 4 mm (n = 40) . The methylene blue staining method was used to observe the microleakage of the adhesive interface between the tooth and filling material at the instant moment, 1, 2 and 3 months after the self-etching adhesives was opened (n = 10) . Results: (1) Increase of microleakage in S group was found with the time span after unsealing, and there was a statistical difference between the instant moment and 3 months after unsealing (P＜0. 05) . (2) There was no significant difference at the 4 test time points in X group (P＞0. 05), although the microleakage value of the samples were increased with the increase of the time after unsealing. (3) The microleakage of X group was greater than that of S group at the instant moment and 1 month after unsealing (P＜0. 05) . Conclusion: Unsealing time may increase the microleakage of the adhesive interface between the tooth and the filling material, the effect varies with the types of the adhesives.

We investigated the carrying status of the virulence genes of Salmonella from different sources in Shijiazhuang City,China,to provide the basic data for the further risk assessment of Salmonella.A total of 186 isolates of Salmonella from different sources were collected and identified serotypes in the area of Shijiazhuang from 2011 to 2016.PCR was performed for eight virulence genes (invA,sopE,agfA,spvR,hilA,stn,pefA,shdA).These Salmonella bacteria were detected in 13 kinds of serotypes.Enteritidis is a significant advantage of the group.The above 8 virulence genes were analyzed,and the virulence genes hilA,stn and invA were the most frequently carried,their respective carrying rate were 90.3％ (168/186),86.6％ (161/186) and 82.8％ (154/186) respectively.We found the virulence genes of Salmonella from different sources were different.It is necessary to take measures to strengthen the food hygiene supervision and prevention and control of the storage and sale of raw poultry stalls in the morning market in Shijiazhuang area.