Objective: To investigate the changes of dentin surface and the effects of different surface treatments on the rebonding effect following non-destructive restoration removal by an Er:YAG laser and to provide reference for oral clinical operation Methods: This study was approved by the ethics review committee of the unit. Using computer-aided design and computer-aided manufacturing (CAD/CAM) technology, 102 zirconia specimens (4 mm × 4 mm × 1.5 mm) were fabricated. In total, 110 impacted third molar teeth were extracted, and 102 dentine blocks (4 mm × 4 mm × 2 mm) were prepared. The zirconia specimen and dentin blocks were bonded with resin cement before removal with an Er: YAG laser. Three disassembled dentin blocks were randomly selected, and the components of dentin surface elements were analyzed by energy dispersive X-ray spectroscopy (EDX). The removed dentin blocks were randomly divided into three groups (n = 33) based on the different surface treatments: control group (no treatment), sandblasting group (50 μm, Al2O3 sandblasting), and laser irradiation group (Er: YAG laser irradiation, parameters were set to 10 Hz, 60 mJ, 0.6 W). Three dentin blocks were randomly selected in each group for scanning electron microscopy (SEM) observation, and the residual resin on dentin surface of remaining 30 dentin blocks in each group were observed under an optical microscope at 20 times magnification. Scores were obtained using the adhesive remnant index (ARI) method. Three groups of dentin blocks (n = 30) that underwent different surface treatments were rebonded with resin cement according to standard procedures and then divided into two subgroups for aging (n = 15). One subgroup was subjected to a 37 ℃ water bath for 24 h, and the other subgroup was subjected to 5 000 thermal cycles after a 37 ℃ water bath for 24 h, and the micro-shear bonding strength of each group was measured. The microshear bonding strength of each group was measured, and fracture modes were analyzed. The differences of dentine surface ARI between the three groups, as well as the inter-group differences in fracture mode, and bonding strength, and the intra-group differences before and after aging were compared between the three groups. Results: When zirconia was removed by Er: YAG laser, there was no obvious damage on the dentin surface, but C and Si elements in dentin increased significantly. After different surface treatments, the ARI scores of the sandblasting and laser irradiation groups were lower than those of the control group (P<0.05), while ARI was not significantly different between the sandblasting and laser irradiation groups (P>0.05). The dentin surface morphology was also different. There was a large amount of residual resin on the dentin surface of the control group. In the sandblasting group, the residual resin was lower, the dentin surface was rough, and the dentin tubules were visible. A large amount of residual resin was observed on the dentin surface of the laser irradiation group. After 24 h of water bath at 37 ℃, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (6.13 ± 2.40) MPa, (9.39 ± 2.00) MPa, and (5.85 ± 1.44) MPa, respectively, and the bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). After being subjected to 24 h of water bath at 37 ℃ and 5 000 thermal cycles, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (5.39 ± 0.83) MPa, (8.45 ± 1.20) MPa and (4.84 ± 1.43) MPa, respectively. The bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). There was no significant difference between the control group, sandblasting group, and laser irradiation group before and after 5 000 thermal cycles following 24 h of water bath at 37 ℃ (P>0.05). In the control group, sandblasting group, and laser irradiation group, cohesive fracture was not observed. The fracture mode was mainly adhesive fracture. Before and after 5 000 thermal cycles, the frequency of mixed fracture in the sandblasting group was significantly higher than that in the other two groups (P<0.05). Conclusion Er: YAG laser removal of zirconia does not damage dentin, but a large amount of resin remains on the dentin surface after removal. The sandblasting process can effectively remove these residual resins, thereby improving the dentine rebonding effect.

Purpose/Significance To expound the development of the application of new generation intelligent technologies in the medi-cal field in China,and to provide ideas for the future development of intelligent medical technologies in China.Method/Process Literature related to the application of medical intelligence technology from 2000 to 2023 is searched and screened on CNKI,and the knowledge graph is drawn by descriptive statistical analysis and CiteSpace software for visualization analysis.Result/Conclusion The number of papers pub-lished in the application research field of domestic medical intelligence technology shows a trend of steady growth and then leveling off.The hot keywords mainly include smart medical care,health care,health management,etc.,forming 8 main cluster sets.Future research should strengthen cooperation and exchanges between researchers and organizations,and pay more attention to the challenges posed by the applica-tion of technology in terms of security and privacy,technology supervision,talent team construction and technological energy consumption.

Objective:This study aims to explore the connotation and importance of clinical research infrastructure, elucidate the key points and operational models of clinical research wards, and summarize the experiences and practices of clinical research wards at Peking Union Medical College Hospital.Methods:The study employed on-site investigations and literature reviews to analyze the construction models and key features of clinical research wards in various medical institutions.Results:Additionally, it introduced advanced experiences from foreign centers and examined the challenges encountered during the process.Conclusions:As a phased achievement, it presents the experience and practices of Peking Union Medical College Hospital in constructing and operating clinical research wards based on National Facility for Translational Medicine (PUMCH). The construction of clinical research facilities and clinical research wards should focus on facility positioning, talent pool, financial investment, management operation, and information systems. This study provides references for the future construction, operation, and development of clinical research facilities.

As an important part of China′s multi-level medical insurance system, commercial health insurance has developed rapidly in recent years, but its guarantee level is still limited, and its role in the multi-level medical insurance system is not fully played. Huimin Insurance, as a new public private partnership health insurance, takes into account the dual characteristics of commercial operation and inclusive protection, and provides an important supplement to meet the needs of the masses for multi-level protection, alleviate the economic burden of serious diseases, and promote the innovation and development of the pharmaceutical industry. The author systematically analyzed the characteristics of social and commercial integration in the development of Huimin Insurance in China from the aspects of value-oriented mechanism, policy complementary mechanism and operation support mechanism, and analyzed the problems of in the current development process of Huimin Insurance based on the holistic governance framework of multi-level medical security system in three dimensions of " hierarchy-institutional-tool". It is suggested that the functional positioning of multiple subjects should be clarified, the ability of information integration should be enhanced, and the product design and serviceshould be optimized, so as to fully enlarge the supplementary security efficiency of Huimin Insurance, and explore a new path for the formation of a multi-level medical insurance system with Chinese characteristics.

The count and recognition of white blood cells in blood smear images play an important role in the diagnosis of blood diseases including leukemia. Traditional manual test results are easily disturbed by many factors. It is necessary to develop an automatic leukocyte analysis system to provide doctors with auxiliary diagnosis, and blood leukocyte segmentation is the basis of automatic analysis. In this paper, we improved the U-Net model and proposed a segmentation algorithm of leukocyte image based on dual path and atrous spatial pyramid pooling. Firstly, the dual path network was introduced into the feature encoder to extract multi-scale leukocyte features, and the atrous spatial pyramid pooling was used to enhance the feature extraction ability of the network. Then the feature decoder composed of convolution and deconvolution was used to restore the segmented target to the original image size to realize the pixel level segmentation of blood leukocytes. Finally, qualitative and quantitative experiments were carried out on three leukocyte data sets to verify the effectiveness of the algorithm. The results showed that compared with other representative algorithms, the proposed blood leukocyte segmentation algorithm had better segmentation results, and the mIoU value could reach more than 0.97. It is hoped that the method could be conducive to the automatic auxiliary diagnosis of blood diseases in the future.
Algorithms ; Leukocytes

With the explosive growth of " City-customized Medical Insurance" products, the voice of commercial health insurance needs medical insurance data support is increasing.The authors took " City-customized Medical Insurance" as the representative of commercial health insurance, analyzed the demands and motivations of stakeholders in medical insurance data sharing through the power-interest matrix model, and summarized the medical insurance data sharing path at the commercial insurance product design end and claim settlement end. It is suggested to strengthen the top-level design, build the implementation path of standardized sharing of medical insurance data and the operation mechanism of hospital data docking, to realize the value increment of all stakeholders.

OBJECTIVES: Primary tumor treatment through surgical resection and adjuvant therapy has been extensively studied, but there is a lack of effective strategies and drugs for the treatment of tumor metastases. Here, we describe a functional product based on a combination of compounds, which can be used as an adjuvant therapy and has well-known mechanisms for inhibiting cancer metastases, improving anti-cancer treatment, and enhancing immunity and antioxidant capacity. Our designed combination, named MVBL, consists of four inexpensive compounds: L-selenium-methylselenocysteine (MSC), D-‍α‍-tocopheryl succinic acid (VES), β‍-carotene (β‍-Ca), and L-lysine (Lys). METHODS: The effects of MVBL on cell viability, cell cycle, cell apoptosis, cell migration, cell invasion, reactive oxygen species (ROS), and paclitaxel (PTX)-combined treatment were studied in vitro. The inhibition of tumor metastasis, antioxidation, and immune enhancement capacity of MVBL were determined in vivo. RESULTS: MVBL exhibited higher toxicity to tumor cells than to normal cells. It did not significantly affect the cell cycle of cancer cells, but increased their apoptosis. Wound healing, adhesion, and transwell assays showed that MVBL significantly inhibited tumor cell migration, adhesion, and invasion. MVBL sensitized MDA-MB-231 breast cancer cells to PTX, indicating that it can be used as an adjuvant to enhance the therapeutic effect of chemotherapy drugs. In mice, experimental data showed that MVBL inhibited tumor metastasis, prolonged their survival time, and enhanced their antioxidant capacity and immune function. CONCLUSIONS This study revealed the roles of MVBL in improving immunity and antioxidation, preventing tumor growth, and inhibiting metastasis in vitro and in vivo. MVBL may be used as an adjuvant drug in cancer therapy for improving the survival and quality of life of cancer patients.
Mice ; Animals ; beta Carotene ; Lysine/pharmacology* ; Antioxidants/pharmacology* ; Quality of Life ; Paclitaxel/pharmacology* ; Apoptosis ; alpha-Tocopherol ; Succinates/pharmacology* ; Cell Line, Tumor ; Cell Proliferation ; Neoplasms

Objective:To analyze the filing mechanism for cross provincial immediate reimbursement of medical insurance in China, so as to provide reference for optimizing the filing mechanism and improving the filing accessibility of insured personnel.Methods:Taking the filing policy of cross provincial immediate reimbursement of medical insurance in 2019 as the research object, on the basis of a comprehensive understanding of the national filing policy background, 90 coordinating regions in Zhejiang Province, Hubei Province and Ningxia Hui Autonomous Region were taken as survey samples to evaluate the relevant policies and extract key parameters, including filing identification methods, filing-related settlement benefits and filing ways. The parameters were compared and analyzed by using descriptive statistical methods.Results:The results of the survey showed that in terms of identity recognition methods, the provision of various supporting materials(residence permit, work certificate, etc.)was still the main way to carry out identity recognition for medical insured persons in different places.Filing-related reimbursement benefits were mainly adjusted by limiting the area of medical insurance treatment and adjusting the benefits parameters(reimbursement ratio). In terms of filing channels, 51(56.7%)sample co-ordination areas had realized at least one remote filing mode.Conclusions:The inclusiveness of filing identity verification mechanism for the floating population needs to be further improved, the filing-related treatment policies need to be further improved, and the convenience and standardization of filing channels need to be strengthened.

After recent years′ development, China′s Internet medical service and medical insurance policy system has begun to take shape, but it still needs to be further improved. By combing the connotation and mode of Internet medical services, the evolution of medical insurance payment system and the content of medical insurance payment policy in the United States, the authors put forward that China could further improve the medical insurance payment policy system of Internet medical care, strengthen the multi-point practice management of licensed doctors on the Internet, give full play to the role of commercial insurance in promoting Internet medical care, and rely on information technology means to improve the medical insurance supervision of Internet medical services, then promote the development and management of Internet medical insurance services in China.

Nanotechnology has emerged as an ideal approach for achieving the efficient chemo agent delivery. However, the potential toxicity and unclear internal metabolism of most nano-carriers was still a major obstacle for the clinical application. Herein, a novel "core‒shell" co-assembly carrier-free nanosystem was constructed based on natural sources of ursolic acid (UA) and polyphenol (EGCG) with the EpCAM-aptamer modification for hepatocellular carcinoma (HCC) synergistic treatment. As the nature products derived from food-plant, UA and EGCG had good anticancer activities and low toxicity. With the simple and "green" method, the nanodrugs had the advantages of good stability, pH-responsive and strong penetration of tumor tissues, which was expected to increase tumor cellular uptake, long circulation and effectively avoid the potential defects of traditional carriers. The nanocomplex exhibited the low cytotoxicity in the normal cells