The core idea of occupational health risk assessment models is to systematically evaluate occupational health risks according to target hazard characteristics and relevant exposure levels of workers. Occupational exposure assessment is based on concentration, frequency, exposure time, and other indicators that indicate actual exposure of workers to occupational hazards, which is a critical component of health risk assessment. However, the accuracy and comparability of assessment results are affected by differences in parameter assignment for exposure assessment across different studies, as well as insufficient emphasis on multiple occupational hazard exposure. This review aimed to explore the assignment and standardization of exposure assessment parameters for occupational health risk assessment modeling, and systematically sorted out the meaning, assignment methods, and sources of exposure assessment related parameters in commonly used occupational health risk assessment models, with the goal of providing researchers with standardized assessment tools to enhance the scientific rigor and practicality of occupational health risk assessments. Considering the individual differences and temporal fluctuations in occupational exposure, it is recommended that researchers should adopt appropriate sampling strategies, reasonably select sample subjects and time based on the division of similar exposure group (SEG), and conduct statistical inference on the obtained data to derive representative exposure parameters. For combined exposure to chemicals with similar toxic effects, the health risk assessment methods are relatively mature. However, the assessment of combined exposure to hazards with different properties and health effects still lacks scientific authority and needs further research and discussion.

Objective To obtain the protective performance parameters of barium sulfate mortar against positron nuclide γ-rays, provide reference data for precise shielding calculations, and guide the design, evaluation, and construction of radiation shielding. Methods The FLUKA program was used to build a model for simulating the dose equivalent rate variation around points of interest under the irradiation of the most commonly used positron nuclide ¹⁸F with changes in the thicknesses of lead and barium sulfate mortar. The transmission curves of lead and barium sulfate mortar were fitted, and the half-value layer (HVL) and lead equivalence of barium sulfate mortar were calculated based on the fitted curves. Results The ambient dose equivalent rate coefficient of positron nuclide ¹⁸F was 1.339 4×10⁻¹ μSv·m²/MBq·h and the HVL for lead was 4.037 mm, with deviations of 0.043% and 1.53% compared to the values provided in the AAPM Report No. 108, respectively. The HVLs for γ-rays produced by ¹⁸F, using barium sulfate mortar with apparent densities of 4.20, 4.00, and 3.90 g/cm³ mixed with 35.2-grade cement in a 4∶1 mass ratio, were 2.914, 2.969, and 3.079 cm, respectively. The lead equivalences were 0.1385, 0.1360, and 0.1311 mmPb/mm, respectively. Conclusion The three types of barium sulfate mortar can provide good protection against γ-rays in positron imaging locations. As the apparent density of barium sulfate increases, its protective effect improves slightly but remains significantly better than common construction materials like concrete and solid bricks.

ObjectiveTo explore the role of cuproptosis and identify cuproptosis-related genes in Wilson disease （WD） through bioinformatics analysis and clinical validation，providing implications and directions for the diagnosis and treatment of WD. Methods（1） Screening of target genes： The differentially expressed genes （DEGs） between WD and healthy control were obtained from GeneCards，and the cuproptosis-related genes were obtained from Gene Expression Omnibus （GEO） and published literature.The cuproptosis-related genes in WD were obtained by intersection.Through gene ontology （GO） and Kyoto Encyclopedia of Genes and Genomes （KEGG） enrichment analyses，the specific biological process，functions or metabolic pathways of cuproptosis-related genes in WD were predicted.Molecular docking and PyMOL visualization were then performed to analyze and verify the potential regulatory mechanism of Gandou Fumu Decoction for cuproptosis.（2）Validation of target genes： The blood samples of 15 WD patients treated in the department of encephalopathy and 15 healthy volunteers undergoing physical examinations in the health management center were randomly collected from the First Affiliated Hospital of Anhui University of Chinese Medicine.The expression levels of target genes were determined by Western blot and real-time PCR. Results（1） A total of 3 607 DEGs in WD were obtained from GSE107323 in GEO，and 68 cuproptosis-related genes were obtained from GeneCards and published literature.Twelve common target genes were obtained by intersection，including three up-related genes（SQSTM1，MIF1，and TAX1BP1） and nine down-regulated genes（CP，SERPINE1，AOC3，GPX4，SLC27A5，VEGF-A，PDHB，PDK1，and ATP7B）.The common target genes were mainly enriched in monocarboxylic acid metabolism，oxidoreductase activity，negative regulation of molecular functions，which mainly involved HIF-1，ferroptosis and other signaling pathways.Molecular docking and PyMOL visualization results showed Gandou Fumu Decoction had good binding ability with the cuproptosis-related genes PDK1，SERPINE1，VEGFA，and AOC3 in WD.（2）A total of 30 blood samples were collected，including 15 WD patients and 15 health volunteers.Western blot results showed that expression levels of target genes were consistent with the results obtained by bioinformatics analysis.RT-qPCR results showed that compared with healthy volunteers，WD patients had down-regulated mRNA levels of SERPINE1，GPX4，SLC27A5，and VEGF-A and up-regulated mRNA levels of SQSTM1 and MIF1（P<0.05）. ConclusionThe expression levels of cuproptosis-related genes in WD patients are consistent with the results predicted by bioinformatics analysis.The characteristic preparation Gandou Fumu Decoction of Xin'an Medicine showed good binding abilities with the cuproptosis-related genes in WD.Cuproptosis may play a key role in the pathophysiological mechanism of WD，which can provide a new target for the diagnosis and treatment of WD.

ObjectiveThree methods were applied to conduct occupational health risk assessment for the working positions exposed to silicon dusts in a sanitary ceramic manufacturing factory， and the evaluation results were compared to explore the applicability of different occupational health risk assessment methods. MethodsOne large sanitary ceramic product manufacturing enterprise in Songjiang District， Shanghai was selected to conduct occupational health risk assessment for the working positions exposed to silicon dusts， using occupational hazard risk index evaluation method， exposure ratio evaluation method， and International Council on Mining and Metals （ICMM） quantitative occupational health risk assessment method . The consistency of the evaluation results of the three methods was tested using weighted Kappa method. ResultsFourteen working positions exposed to silicon dusts were identified， and three positions had excessive dust concentration： composite forming position of phase 2 workshop （0.80 mg·m^-3）， addition forming position of phase 2 workshop （1.00 mg·m^-3）， and glazing position of 1F in phase 2 workshop （1.50 mg·m^-3）， with an excessive rate of 21.42%. The occupational hazard risk index evaluation method assessed 6 positions with no harm， 6 positions with mild harm， and 2 positions with moderate harm. The ICMM quantitative occupational health risk assessment method assessed 6 positions with potential risks， 2 positions with tolerable risks， and 6 positions with intolerable risks. The exposure ratio evaluation method assessed 8 positions with medium risk， 5 positions with high risk， and 1 position with extremely high risk. The consistency test results of the three evaluation methods were poor. The Kappa coefficient between the occupational hazard risk index evaluation method and the ICMM quantitative occupational health risk assessment method was 0.15. The Kappa coefficient between the occupational hazard risk index evaluation method and the exposure ratio evaluation method was -0.09. The Kappa coefficient between the ICMM quantitative occupational health risk assessment method and the exposure ratio evaluation method was 0.04. The RR values obtained by the three evaluation methods were significantly correlated： the correlation coefficients between RR_{ICMM quantitative assessment method} and RR_{exposure ratio evaluation method}， RR_{Occupational hazard risk index evaluation method} and RR_{ICMM quantitative assessment method}， RR_{Occupational hazard risk index evaluation method} and RR_{exposure ratio evaluation method} were 0.915， 0.604， and 0.594， respectively. The correlation between the assessment result level and C_TWA was strong. ConclusionThe occupational hazard risk index evaluation method is suitable for the working positions with low silicon dust exposure concentration， the ICMM quantitative occupational health risk assessment method and the exposure ratio evaluation method are suitable for the positions with high silicon dust exposure concentration， but all these three evaluation methods have limitations. It is more reasonable to use multiple methods at the same time in actual evaluation work.

Humans ; Gastrointestinal Microbiome ; Constipation/therapy* ; Probiotics/therapeutic use* ; Patients

Objective:To observe the effect of fractional flow reserve derived from computed tomography(FFRcT)measurement system based on iterative algorithm in diagnosing survival prognosis of patients with acute ST-segment elevation myocardial infarction(STEMI)after they underwent emergency percutaneous coronary intervention(PCI).Methods:A total of 98 patients with acute STEMI complicated with multi vessel disease(MVD)were prospectively selected from the Affiliated Hospital of Inner Mongolia Medical University during October 2022 and February 2024.All patients were divided into two groups according to random double-blind method:FFRCT guidance group(49cases)and coronary angiography(CAG)guidance group(49cases).The FFRCT guidance group used FFRCT as the diagnostic basis,which carried out complete revascularization strategy according to FFRCT examination results.CAG guidance group handled infarct-related vessels as the CAG guidance.The basic clinical data,operation details of PCI surgery/technical indicators and utilization indicators of related resource of the two groups were observed,and angina pectoris attack and major adverse cardiovascular events(MACE)and other prognosis indicators of related survival of the two groups were observed and followed up.The primarily observed endpoints were all-cause death,heart failure,stroke,MACE,and composite endpoint event of stroke and revascularization again within 24 months follow-up.Results:The proportion of undergoing PCI on non-infarct-related vessel was 55.10％(27/49)in FFRCT group.In the comparison of operation detail of surgery/technique indicator after PCI surgery between two groups,the operation time of FFRCT guidance group was(65±10)min,which was longer than that[(60±8)min]of CAG guidance group,and the total length of stent was(31±10)mm,which was shorter than that[(36±10)mm]of CAG guidance group.There were statistically significant differences in the above two indicators between the two groups(t=-4.062,-6.710,P＜0.05),respectively.There were no statistically significant differences in the amount of contrast agent,average diameter of stent and length of stay between the two groups(P＞0.05).Compared with the CAG group,the incidences of non-lethal myocardial infarction,primary endpoint events,recurrent angina pectoris,and revascularization of FFRCT group significantly reduced within 24 months follow-up,and the differences of them between two groups were statistically significant(x2=4.926,5.273,6.091,5.804,P＜0.05),respectively.Conclusion:Using FFRCT measurement system based on iterative algorithm in PCI process of emergency for patients with acute STEMI complicated with MVD to examine and guide revascularization is safe and effective,which is worthy of recognition.It has obvious advantages over CAG guidance in reducing the risk of cardiovascular and cerebrovascular events,and in improving prognosis after PCI.

Objective To observe the effects of Renshen Yimai Prescription on oxidative stress and vascular aging in ApoE-/-mice;To explore its mechanism of intervention in vascular aging.Methods Forty ApoE-/-mice were divided into model group,Western medicine group(rosuvastatin,2.6 mg/kg),TCM low-and high-dosage group(Renshen Yimai Prescription,4.29,8.58 g/kg),with 10 mice in each group.Another 10 C57BL/6J mice were set as normal group.A vascular aging model was established by ApoE-/-mice fed with a Western diet.Each medication group was given corresponding drugs by gavage for 12 consecutive weeks,the normal group and model group were given equivalent volume of pure water.HE staining and Masson staining were used to observe the morphological changes of aortic tissue,and ox-LDL content in serum was detected by ELISA,the contents of ROS,GSH,GPX and NAD+in serum were detected by colorimetric method,the expressions of SIRT1,p53,p21 and NOX4 protein in aortic tissue were detected by Western blot.Results Compared with the normal group,the model group mice showed significant fat deposition in the aorta,thickening of the intima and media,a significant decrease in elastic fibers,and an increase in collagen fibers;the serum contents of ox-LDL and ROS significantly increased(P<0.01),while the contents of GSH,GPX and NAD+significantly decreased(P<0.01);the expression of SIRT1 protein in the aortic tissue significantly decreased(P<0.05),the expressions of p21 and p53 protein significantly increased(P<0.01,P<0.05).Compared with the model group,a small amount of lipid deposition was observed in the intima of aorta in each medication group,with clearer membrane structures in each layer and reduced collagen fiber;the serum contents of ox-LDL and ROS in each medication group were significantly decreased(P<0.01),while the GSH content significantly increased(P<0.05,P<0.01),the NAD+content in TCM low-dosage group significantly increased(P<0.05);the expressions of p21 and NOX4 protein in aortic tissue of the TCM high-dosage group significantly increased(P<0.05,P<0.01).Compared with the Western medicine group,the TCM high-dosage group showed a significant decrease in ROS content(P<0.01)and a significant decrease in p53 protein expression(P<0.05).Compared with the TCM low-dosage group,the TCM high-dosage group showed a significant decrease in p21 protein expression(P<0.01)and a significant increase in NOX4 protein expression(P<0.01).Conclusion Renshen Yimai Prescription may reduce vascular endothelial damage by regulating oxidative stress levels and related protein expression,thereby playing a role in improving vascular aging.

Objective To investigate the relationship between hemoglobin glycation index(HGI)and metabolic syndrome(MS)and its components.Methods A cross-sectional study was conducted to randomly select 823 patients from the First People's Hospital of Huzhou from September 2022 to September 2023.HGI is calculated based on fasting blood glucose(FPG)and glycosylated hemoglobin(HbA1c)values.The patients were divided into low HGI group(HGI<-0.250%,274 cases),medium HGI group(-0.250%≤HGI≤0.214%,275 cases)and high HGI group(HGI>0.214%,274 cases)by HGI quantile method.The general data and metabolic indexes of each group were compared,and the correlation between HGI and MS and its components was analyzed by multiple Logistic regression.Results With the increase of HGI level,the prevalence rate of MS showed an upward trend(P<0.05).The prevalence rate of MS in low,medium and high HGI groups was 24.8%,42.5%and 55.5%,respectively.Multiple Logistic regression analysis showed that elevated HGI level was risk factor for MS,central obesity,hypertension,hyperglycemia,hypertriglyceridemia and low high-density lipoprotein hyperlipidemia(P<0.05).The risk of MS,central obesity,hypertension,hyperglycemia,hypertriglyceridemia and low high-density lipoprotein hyperlipidemia in high HGI group was 4.005 times(95%CI:2.763-5.808),3.765 times(95%CI:2.604-5.443),1.596 times(95%CI:1.089-2.337),2.655 times(95%CI:1.809-3.895),2.024 times(95%CI:1.404-2.918)and 2.247 times(95%CI:1.537-3.284)of that in low HGI group,respectively.Conclusion HGI is related to MS and its components,and HGI may be a new indicator to prevent and monitor MS.

Objective To investigate the clinical effect of Jiaotai Shugan decoction in adjuvant treatment of type 2 diabetes mellitus(T2DM)complicated with depression with liver qi stagnation type.Methods From June 2022 to June 2023,90 patients with T2DM complicated with depression with liver qi stagnation type treated in the Second People's Hospital of Lishui City were selected,who were randomly divided into control group and observation group,with 45 cases in each group.Both groups were treated with basic treatment of diabetes,control group was given escitalopram to improve the emotion,while observation group was further given Jiaotai Shugan decoction.After 8 weeks,the clinical effective rate were evaluated by Hamilton depression scale-24(HAMD-24)and patient health questionnaire-9(PHQ-9)scores,the levels of 5-hydroxytrytamine(5-HT),noradrenaline(NE),brain-derived neurotrophic factor(BDNF),fasting blood glucose(FPG),2-hour postprandial blood glucose(2hPG)and haemoglobinA1c(HbA1c)were detected,and adverse reactions were recorded.Results The clinical total effective rates of observation group was higher than that of control group,and the difference was statistically significant(P＜0.05).8 weeks after treatment,HAMD-24 and PHQ-9 scores of observation group were lower than those of control group(P＜0.01).The levels of 5-HT,NE and BDNF of observation group were higher than those of control group(P＜0.01).The levels of FPG,2hPG and HbA1c in observation group were lower than those in control group(P＜0.01);There was no significant difference in adverse reactions between two groups(P＞0.05).Conclusion Modified Jiaotai Shugan decoction is effective in treating T2DM complicated with depression with liver qi stagnation type,can reduce HAMD-24 and PHQ-9 scores,increase the levels of 5-HT,NE,BDNF,and reduce the levels of FPG,2hPG,HbA1c.There was no obvious adverse reactions.

Passing the hospital grading evaluation, establishing a tertiary-A specialized hospital for occupational diseases, enhancing hospital's internal quality and sustainable development, and continuously improving medical service quality are important measures to promote the high-quality development of hospitals. The evaluation standards for occupational disease specialized tertiary-A hospital require standardized, scientific, and sustainable management of medical equipment. Guangdong Province Hospital for Occupational Disease Prevention and Treatment is the first tertiary-A hospital for occupational diseases specialized in Guangdong Province. Relative regulation on medical equipment management was systematically reviewed based on the requirement of tertiary-A specialized hospital for occupational diseases during hospital grading evaluation process. Building and completing the medical equipment management system, standardizing and strengthening government procurement management, completing the configuration management and safety management of large-scale medical equipment, strengthening the effectiveness analysis and evaluation of large equipment, enhancing training on medical equipment usage, establishing emergency allocation systems for first-aid and life support medical equipment, and forming a medical equipment quality and safety management team is the measure to systematically improve and implement each item in various regulation for the full lifecycle management of medical equipment. It provides vital support in passing the tertiary-A hospital evaluation for hospitals. During the hospital grading evaluation process, each issue identified in medical equipment management was addressed and improved. This process continuously enhanced the hospital's medical equipment management level, ensured the safe and effective use of medical equipment, and improved the quality of medical services, laying a solid foundation for the hospital to become a high level specialized medical institution for occupational diseases.