Implant treatment in the esthetic area requires stable osseointegration and successful esthetic outcomes. Achieving this goal requires careful consideration of accurate implant axis and ideal three-dimensional position. Owing to the high esthetics and the special anatomical structure of the maxillary, a successful implant means a synthesized deli-beration of the residual bone dimensions, soft-tissue thickness, and the relationship of the residual alveolar ridge with the planned restoration. This article offers an in-depth analysis of the clinical decisions and key factors affecting the implant direction in the esthetic area.
Dental Implantation, Endosseous/methods* ; Dental Implants ; Esthetics, Dental ; Alveolar Ridge Augmentation/methods* ; Osseointegration ; Maxilla/surgery* ; Dental Implants, Single-Tooth

Objective: To measure and analyze the morphometric changes in the anterior alveolar bone during treatment and retention stage after retraction in bimaxillary adults using cone-beam CT(CBCT). Methods: Fifteen adult patients, four males and 11 females, aged 19 to 28 years[(22.2±3.1) years], who have completed orthodontic treatment and extracted four first premolar teeth for retraction in the Department of Orthodontics, The Affiliated Stomatological Hospital of Nanchang University from January 2016 to December 2018 were selected. CBCT was taken to assess the labial and palatal vertical bone level, total bone thickness at crest area, middle root area and apical area in pre-treatment (T1), post-treatment (T2) and at follow-up (maintained for more than two years) (T3). The differences in alveolar bone morphology at different stages were compared by single factor repeated measure ANOVA, and Pearson correlation analysis was performed on the amount of alveolar bone change in treatment stage and retention stage. Results: There were statistically significant differences in the alveolar bone height of the palatal side of maxillary anterior teeth, the labial side of maxillary lateral incisors and canine among three time points (P<0.05). The height difference of palatal alveolar bone of anterior teeth in T1-T2 stage was statistically significant (P<0.05). Palatal alveolar bone of upper and lower central incisors decreased by (1.52±0.32) and (4.96±0.46) mm, respectively. The height difference of anterior palatal alveolar bone was statistically significant in T2-T3 stage(P<0.05), the palatal alveolar bone height of central incisors increased by (1.20±0.27) and (3.14±0.35) mm respectively. The height difference of palatal alveolar bone in the anterior teeth of T1-T3 stage was statistically significant (P<0.05), and the height of palatal alveolar bone of central incisors was decreased (0.33±0.11) and (1.82±0.39) mm, respectively. There were statistically significant differences in the thickness of the cervical and middle root alveolar bone of anterior teeth among three time points (P<0.05). The difference of alveolar bone thickness of the cervical and middle root of anterior teeth at T1-T2 was statistically significant (P<0.05). decreased by (0.63±0.10) and (0.67±0.09) mm in lateral incisors, respectively. In the T2-T3 stage, the alveolar bone thickness of the crest area of the lower anterior teeth was significantly different (P<0.05), the alveolar bone thickness of mandibular central incisor crest area increased (0.09±0.03) mm. There were statistically significant differences in alveolar bone thickness in crest area and middle root of the incisors during T1-T3 stage (P<0.05), among which the middle root decreased by (0.38±0.16) mm and (0.63±0.13) mm, respectively. There was no statistically significant difference in other areas (P>0.05). The change of alveolar bone height in palatal side of upper anterior teeth at T2-T3 was very strongly negatively correlated with the change in T1-T2. The change of alveolar bone height in labial side of upper anterior teeth and lingual side of lower anterior teeth and the thickness of incisor root and neck were moderately strongly negatively correlated (r≤-0.8, P<0.001), the change of alveolar bone height in labial side of upper anterior teeth and lingual side of lower anterior teeth and the thickness of incisor crest area were moderately strongly negatively correlated (-0.8<r≤-0.4, P<0.05). Conclusions: For adult patients after retraction, anterior alveolar bone decreased significantly. In the retention stage, the same degree of bone apposition will occur, but still have alveolar bone loss compared with pre-treatment. The amount of alveolar bone change in the retention stage correlated with the amount of alveolar bone change in the treatment stage.
Male ; Female ; Humans ; Maxilla/diagnostic imaging* ; Cone-Beam Computed Tomography ; Tooth Root ; Malocclusion ; Palate

Palatal radicular groove is a developmental malformation of maxillary incisors, lateral incisors in particular, which often causes periodontal destruction. This paper reports a case of combined periodontal-endodontic lesions induced by palatal radicular groove, which was initially misdiagnosed as a simple periapical cyst. After root canal therapy and periapical cyst curettage, the course of disease was prolonged, resulting in the absence of buccal and maxillary bone plates in the affected tooth area. After the etiology was determined, the affected tooth was extracted and guide bone tissue regeneration was performed at the same time, followed by implantation and restoration at the later stage, leading to clinical cure. The palatal radicular groove is highly occult, and the clinical symptoms are not typical. If the abscess of the maxillary lateral incisor occurs repeatedly, and the abscess of the maxillary lateral incisor has not been cured after periodontal and root canal treatment, cone-beam computed tomographic and periodontal flap surgery should be considered.
Humans ; Incisor ; Radicular Cyst ; Abscess ; Tooth Root/abnormalities* ; Root Canal Therapy ; Maxilla ; Cysts

Humans ; Maxilla ; Maxillary Sinusitis ; Osteomyelitis

Objective: To establish a comprehensive diagnostic classification model of lateral cephalograms based on artificial intelligence (AI) to provide reference for orthodontic diagnosis. Methods: A total of 2 894 lateral cephalograms were collected in Department of Orthodontics, Capital Medical University School of Stomatology from January 2015 to December 2021 to construct a data set, including 1 351 males and 1 543 females with a mean age of (26.4± 7.4) years. Firstly, 2 orthodontists (with 5 and 8 years of orthodontic experience, respectively) performed manual annotation and calculated measurement for primary classification, and then 2 senior orthodontists (with more than 20 years of orthodontic experience) verified the 8 diagnostic classifications including skeletal and dental indices. The data were randomly divided into training, validation, and test sets in the ratio of 7∶2∶1. The open source DenseNet121 was used to construct the model. The performance of the model was evaluated by classification accuracy, precision rate, sensitivity, specificity and area under the curve (AUC). Visualization of model regions of interest through class activation heatmaps. Results: The automatic classification model of lateral cephalograms was successfully established. It took 0.012 s on average to make 8 diagnoses on a lateral cephalogram. The accuracy of 5 classifications was 80%-90%, including sagittal and vertical skeletal facial pattern, mandibular growth, inclination of upper incisors, and protrusion of lower incisors. The acuracy rate of 3 classifications was 70%-80%, including maxillary growth, inclination of lower incisors and protrusion of upper incisors. The average AUC of each classification was ≥0.90. The class activation heat map of successfully classified lateral cephalograms showed that the AI model activation regions were distributed in the relevant structural regions. Conclusions: In this study, an automatic classification model for lateral cephalograms was established based on the DenseNet121 to achieve rapid classification of eight commonly used clinical diagnostic items.
Male ; Female ; Humans ; Young Adult ; Adult ; Artificial Intelligence ; Deep Learning ; Cephalometry ; Maxilla ; Mandible/diagnostic imaging*

OBJECTIVES: To summarize the open-eruption technique of impacted anterior maxillary teeth, this study reports a technically improved operation on surgical exposure based on dental follicles and evaluates post-treatment periodontal health considering the effect of dental follicles. METHODS: Patients who underwent open-eruption technique with unilateral labially impacted maxillary central incisors were selected. The impacted teeth were assigned to the experimental group, and the contralateral unimpacted maxillary central incisors were assigned to the control group. In the surgical exposure, the new technique makes use of dental follicles to manage the soft tissue, so as to preserve soft tissue for better aesthetic results and healthier periodontal tissue. Tooth length, root length, alveolar bone loss, and alveolar bone thickness were recorded after the therapy. RESULTS: A total of 17 patients with unilateral maxillary central incisor impaction were successfully treated. The tooth length and root length of the two groups showed a statistically significant difference between the impacted and homonym teeth, with a shorter length in the impacted tooth (P<0.05). More labial alveolar bone loss was found in the experimental group compared with that in the control group (P<0.05). The outcomes of the cementoenamel junction width, pa- latal alveolar bone loss, and alveolar bone thickness did not indicate statistical significance between the experimental and control groups (P>0.05). CONCLUSIONS In the surgical exposure, the new technique uses dental follicles to manage the soft tissue and preserve it for better aesthetic results and healthier periodontal tissues.
Humans ; Tooth, Impacted/surgery* ; Incisor ; Alveolar Bone Loss/diagnostic imaging* ; Tooth Root ; Dental Sac ; Maxilla/surgery* ; Esthetics, Dental

Occlusal plane (OP) is one of the essential factors affecting craniofacial morphology and function. The OP not only assists in diagnosing malocclusion but also serves as an important reference for making treatment plans. Patients with different types of malocclusions have different forms of OP. Compared with patients with standard skeletal facial type, the occlusal plane of patients with skeletal class Ⅱ and high angle is steeper, while that of patients with skeletal class Ⅲ and low angle is more even. In orthodontic treatment, adjusting and controlling the OP can promote the normal growth and development of the mandible in most patients with malocclusion during the early stage of growth, while causing favorable rotation of the mandible in some adults with mild-to-moderate malocclusion. For moderate-to-severe malocclusion, the OP rotation by orthodontic-orthognathic treatment can achieve better long-term stability. This article reviews the evolution of the definition of OP and its implications for diagnosing and the guiding treatment of malocclusion.
Adult ; Humans ; Dental Occlusion ; Maxilla ; Cephalometry ; Malocclusion/therapy* ; Mandible

Objective:To investigate the feasibility and clinical effect of the surgical approach and method of transnasal fenestration under nasal endoscope for the treatment of maxillary odontogenic cyst. Methods:The clinical data of 23 cases with maxillary odontogenic cysts treated by nasal endoscopy through nasal fenestration were retrospectively analyzed. All cases underwent nasal endoscopy and CT examination before the operation. The mucosal membrane of the parietal wall of the cyst was excised through fenestration of the nasal base. The cyst fluid was removed by decompression, and the bony opening of the nasal base was trimmed and enlarged to the edge of the cyst. The intraoperative and postoperative effects were observed. Results:All cases were well exposed under the direct vision of nasal endoscope. The top wall of the cyst was removed to maximize the communication between the cyst cavity and the nasal floor. There were no complications such as nasolacrimal duct injury, turbinate atrophy, necrosis, and facial numbness. All patients were followed up for 6-12 months, and the clinical symptoms gradually disappeared after surgery. The inferior turbinate was in good shape, the cyst cavity was smooth, the cyst wall was determined, and no cyst recurrence was observed. Conclusion:The treatment of odontogenic cyst of maxilla under nasal endoscope through nasal fenestration is convenient. It has less trauma, fewer complications and a satisfactory curative effect, which is worthy of clinical promotion.
Humans ; Maxilla ; Retrospective Studies ; Odontogenic Cysts/surgery* ; Endoscopy ; Turbinates/surgery* ; Endoscopes

Ectopic eruption of the maxillary permanent first molar refers to its deviation from the normal position due to some factors during the eruption process, which will lead to root resorption and early loss of the adjacent second primary molar, mesial movement itself, or serious malocclusion. To solve these problems, the Society of Pediatric Dentistry of Chinese Stomatological Association organized pediatric dental experts from 16 universities and hospitals, including West China Hospital of Stomatology, Sichuan University, Peking University School and Hospital of Stomatology, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine to carry out a panel discussions. The research, and diagnosis and treatment experiences of ectopic eruption of maxillary permanent first molar at home and abroad in recent years were also referred to. The present guideline was eventually developed for the reference of dental clinicians.
Child ; China ; Consensus ; Humans ; Maxilla ; Molar ; Tooth Eruption, Ectopic/therapy*

OBJECTIVE: To investigate the efficacy of vertical control by using conventional mini-implant anchorage in maxillary posterior buccal area for Angle class Ⅱ extraction patients. METHODS: Twenty-eight Angle class Ⅱ patients [9 males, 19 females, and age (22.6±2.8) years] were selected in this study. All of these patients were treated by using straight wire appliance with 4 premolars extraction and 2 mini-implant anchorage in maxillary posterior buccal area. In this study, the self-control method was used to measure and analyze the lateral radiographs taken before and after orthodontic treatment in each case, the main cephalometric analysis items were related to vertical changes. The digitized lateral radiographs were imported into Dolphin Imaging Software (version 11.5: Dolphin Imaging and Management Solutions, Chatsworth, California, USA), and marked points were traced. Each marked point was confirmed by two orthodontists. The same orthodontist performed measurement on the lateral radiographs over a period of time. All measurement items were required to be measured 3 times, and the average value was taken as the final measurement result. RESULTS: Analysis of the cephalometric radiographs showed that, for vertical measurements after treatment, the differences of the following measurements were highly statistically significant (P < 0.001): SN-MP decreased by (1.40±1.45) degrees on average, FMA decreased by (1.58±1.32) degrees on average, the back-to-front height ratio (S-Go/N-Me) decreased by 1.42%±1.43% on average, Y-axis angle decreased by (1.03±0.99) degrees on average, face angle increases by (1.37±1.05) degree on average; The following measurements were statistically significant (P < 0.05): the average depression of the upper molars was (0.68±1.40) mm, and the average depression of the upper anterior teeth was (1.07±1.55) mm. The outcomes indicated that there was a certain degree of upper molar depression after the treatment, which produced a certain degree of counterclockwise rotation of the mandibular plane, resulting in a positive effect on the improvement of the profile. CONCLUSION The conventional micro-implant anchorage in maxillary posterior buccal area has a certain vertical control ability, and can give rise to a certain counterclockwise rotation of the mandible, which would improve the profile of Angle Class Ⅱ patients.
Bicuspid ; Cephalometry/methods* ; Female ; Humans ; Male ; Malocclusion, Angle Class II/therapy* ; Mandible ; Maxilla/diagnostic imaging* ; Orthodontic Anchorage Procedures ; Tooth Movement Techniques ; Vertical Dimension