BACKGROUND:With the development of computer-aided design and computer-aided manufacturing technology,zirconia abutments with a titanium base are widely used in clinic due to its good application advantages,but there are still some problems and a lack of consensus design standards. OBJECTIVE:To review the fabrication methods of Ti-base zirconia abutment,and the effect of abutment connection,emergence design,abutment angle,and bonding on mechanical properties of Ti-base zirconia abutment. METHODS:Relevant literature published from 2010 to 2023 was searched in CNKI and PubMed databases with the search terms"zirconia abutment,titanium base"in Chinese and English,respectively.The search time limit was extended for some classical literature.The relevant literature was obtained through inclusion and exclusion criteria,and 57 eligible documents were included for review. RESULTS AND CONCLUSION:It is recommended that clinicians try to select antirotational titanium bases or rotational titanium bases with a Morse taper connection.Implants should be placed in the correct axial angulation of not more than 15° or with an inclination to the palatal side when using angled zirconia abutments.When a≥30° labial inclination is followed for implant placement,the bite force must be decreased effectively to reduce the risk of mechanical and biological complications of implants,abutments,and prostheses.Ti-base zirconia abutments with a higher gingival height should be selected,and its restorative angle should not exceed 40°.Multilink Hybrid Abutment could be the first choice for extraoral bonding of zirconia abutment to titanium bases.

BACKGROUND:Periodontitis is an inflammatory and destructive disease with plaque biofilm as the main pathogenic material,which occurs in the gingiva,periodontal ligament,alveolar bone and cementum.The antigen of bacterial complex and its secreted toxin and enzyme directly lead to the destruction of periodontal tissue and trigger the host's immune response,causing indirect damage to the body tissue.Silence information regulatory factors(Sirtuins,SIRTs)play an important role in anti-aging,anti-oxidative stress,regulating inflammation,and mediating autophagy,and are closely related to the occurrence and development of periodontitis. OBJECTIVE:To review the research status of Sirtuins in periodontitis. METHODS:The first author used the computer to search the relevant research regarding the role of Sirtuins in periodontitis in PubMed,Web of Scene,CNKI and WanFang databases.The key words were"Sirtuins,Sirtuin1-7,periodontitis"in English and Chinese.After literature screening,57 articles were included for review and analysis. RESULTS AND CONCLUSION:SIRT1,SIRT2,SIRT3,and SIRT6 participate in regulating the occurrence and development of periodontitis.Inhibition of SIRT1 expression may be the target of periodontitis treatment,while overexpression of SIRT1 can inhibit periodontitis and protect periodontal tissue.The activator of SIRT1 can reduce the inflammation of periodontal tissue and improve the systemic pathological changes caused by periodontitis.SIRT2 is involved in nicotinamide phosphoribosyltransferase-mediated periodontal inflammation and plays a role in the treatment and prognosis of periodontal diseases.SIRT3 can improve age-related periodontal disease.Gastrodin promotes the osteogenic differentiation of periodontal ligament stem cells through the up-regulation of SIRT3.The activator of SIRT3 reduces the damage of periodontitis to periodontal and renal tissues by regulating the level of autophagy in the cells.SIRT6 can inhibit the inflammatory reaction of periodontal tissue and inhibit the differentiation and mineralization of cementoblasts.SIRT6 is beneficial to the prognosis of periapical periodontitis.The relationship between SIRT4,SIRT5,SIRT7 and periodontitis is rarely reported.

BACKGROUND:With the increasing demand for edentulous jaw restoration,"All-on-4"concept is widely used.The load transfer mode of implant is different from that of natural tooth.The three-dimensional finite element analysis can study the stress distribution of implants and surrounding bone tissues under functional loading.On this basis,it provides research methods for finding suitable implant materials,optimizing implant geometry,and designing clinical surgical protocols. OBJECTIVE:To review researches related to three-dimensional finite element analysis in"All-on-4"concept. METHODS:Relevant literature published from 2003 to 2023 was searched in CNKI and PubMed databases with the search terms of"finite element method;All-on-4;edentulous;biomechanics"in Chinese and English.Finally,65 articles were included for review. RESULTS AND CONCLUSION:(1)In the case of insufficient horizontal bone mass,we can choose to apply narrow diameter implants,but we need to pay attention to the effect of the presence of the cantilever on the stress distribution and reduce the risk of failure.(2)The"All-on-4"concept reduces the stress distribution of bone by tilting the distal middle implant,but the ideal angle of the distal implant tilt in different jaw types requires further study.(3)The presence of cantilevers increases the risk of implant failure,and keeping the cantilever length/AP distance ratio at 0.9 helps to minimize mechanical complications.(4)When a framework is made of a material with a lower elastic modulus,the stress on the framework itself will be smaller,but it will increase the stress on the implant,prosthetic screw,abutment and peri-implant bone.On the contrary,when a material with a higher elastic modulus is used,it can reduce the stress on the prosthetic components,implants and peri-implant bone in the restoration,but the stress on the framework itself is higher.(5)The"All-on-4"concept allows for a better mechanistic balance,but requires the development of a long-term,effective treatment program that is tailored to the patient's specific situation.(6)Proper occlusal scheme is the key to the success of implant treatment,and there is no difference between canine-guide occlusion and group function occlusion in terms of the longevity of the restoration.However,there are many factors that influence occlusal design,and further in vitro experiments as well as a number of clinical studies are needed to explore the ideal occlusal design of the"All-on-4".

Occupational therapy, as one of the important subdisciplines of rehabilitation therapy, takes occupational activities as the medium or purpose of treatment and life participation as the goal of treatment to meet the growing demand for rehabilitation. According to the Minimum Standards for the Education of Occupational Therapists developed by the World Federation of Occupational Therapists, many countries and regions have formulated educational standards that meet their own national or regional characteristics. Comparatively, the number of occupational therapists is seriously insufficient, the talents cultivation is relatively lagging behind, and the education level is uneven in mainland China; while in Hongkong and Taiwan, occupational therapy has an independent education system and a relatively mature talent training model. This study summarized the practical experience and reviewed the relevant literature. Based on the summary and review, we made a comparative analysis of postgraduate education in mainland China and Taiwan from the aspects of educational system and accreditation, enrollment objects, curriculum setting and teaching methods, which would provide a reference for the improvement of occupational therapy personnel training system in mainland China.

Objective The HPLC-MS/MS is used to comprehensively monitor the feeding conditions of raw materials in Yuanhu analgesic capsules, and the content of the index components can be detected at the same time. Methods The Inertsil ODS-3 (4.6 mm×250 mm, 5 μm) was used with the column temperature 40 ℃, Flow phase: 0.1% formic acid-acetonitrile; the gradient elution program, active ingredients were separated by HPLC, and the Electrospray Ionization Mass (ESI) source was applied and operated in the negative ion mode, and reactions ion monitoring mode (MRM) for quantitative analysis were selected. Results Through analysis and contrast of the medicinal materials, reference substance of primary mass spectrogram showed the same characteristic peak, and the proprietary Chinese medicine can be judged by prescription feeding process. The tetrahydroxene and imperatorin had a good linear relationship in 5.08×10-5-30.45×10-5μg (r=0.999 4), 5.02×10-5-30.09×10-5μg (r=0.999 2). Precision test were 0.99% and 1.14%, the recovery rate were 97.02%-99.66%, 97.62%-99.94%. Conclusions The method is simple, accurate and reliable, high sensitive and fast. It is suitable to monitor the feeding condition and quality of yuanhu analgesic capsules.

Objective The monitoring of the feeding situation of active pharmaceutical ingredient in Shendan-Chenpi tablet by HPLC-MS/MS,and the content of sodium taurocholate and hesperidin.Methods Using ZORBAX Eclipse Plus C18(4.6 mm×250 mm, 5 μm)Column temperature 40 ℃, Mobile phase with acetonitrile-10 mmol/sodium acetate solution, using gradient elution program. Active ingredients were separated by HPLC, and the Electrospray Ionization Mass (ESI) source was applied and operated in the negative ion mode, and reactions ion monitoring mode(MRM) for quantitative analysis were selected. Results The proprietary Chinese medicine is judged by the prescription feeding process, through analysis and contrast of the medicinal materials, reference substance of primary mass spectrogram, secondary mass spectrogram of peak. The aurocholic acid sodium and hesperidin had a good linear relationship in 0.242×10-2-1.45×10-2μg(r=0.996 0), 0.688×10-2-10.30×10-2μg(r=0.999 2), and the precision test were 0.78% and 1.56%, and the recovery rate were 102%-103%,96%-109%. Conclusions The method was simple, accurate and reliable, high sensitive and fast. The comprehensive monitoring was applied to the Shedan-Chenpi tablet in feeding analysis and quality.

Objective To develop a HPLC-MS/MS method for comprehensive monitoring and control of the raw material feeding (honeysuchle flowers extract and baikal skullcap root extract) , and simultaneous determination of chlorogenic acid and baicalin in Yinhuang capsules. Methods The separation was performed on an Inertsil ODS-3 (2.1 mm × 150 mm, 5 μm) analytical column with the mobile phase consisting of methanol- 10 mmol/L ammonium acetate solution by gradient elution program, and the column temperature was 40 ℃. Active ingredients were separated by HPLC, and the Electrospray Ionization Mass (API) source was applied and operated in the negative ion mode, and reactions ion monitoring mode (MRM) for quantitative analysis were selected. Results The samples and the mixed Extract have the same characteristic peak in MS and MS/MS. According to the prescription feeding process, the proprietary Chinese medicine wasdetermined. The results showed that the palladium residue of 6 batches samples were up to the standard by HPLC/MS/MS chromatographic peak areas. The calibration cruve of chlorogenic acid and baicalin were linear: 0.60-4.80 μg/ml (r = 0.9989),2.87-14.40 μg/ml (r = 0.9986), with the relative standard deviation of repeatability by 0.69% and 0.69% respectively, and the mean recovery rate were 95%-102%, 95%-103%, respectively. Conclusions The method was proven to be simple, accurate, reliable, high sensitive and can be used for determination and control of the raw material feeding (honeysuchle flowers extract and baikal skullcap root extract) and quality in Yinhuang capsules.

Objective To study the correlationship between type Ⅰcollagenα1 (COL1A1) gene polymorphism and the occurrence of osteosarcoma. Methods Peripheral blood from 54 patients with osteosarcoma and 126 normal ones were collected, rs1061970 genotype of COL1A1 gene was amplified with PCR and products were analyzed by pyrosequencing among the samples. Results The allele frequency of TT (13.0%) and CT (48.1%) was significantly higher in pathologi-cal group than that in the normal control group, which manifested a allele frequency of TT(11.9%) and CT(30.2%) (P<0.05). Additionally, allele frequency of T in patients with osteosarcoma was 37.0%, higher than the control group (27.0%), with OR of 1.59 and 0.99-2.57 of 95%CI, with no difference of statistically significant (P>0.05), but the risk was still on the rise of osteosarcoma. Conclusion COL1A1 gene polymorphism may be related with the incidence of osteosarcoma, patients who carry the T allele of gene of COL1A1 may increase the risk of osteosarcoma occurrence.

To characterize the CD45RA+and CD45RO+T lymphocyte subsets in the peripheral blood of patients with cGVHD induced by allogeneic haematopoietic stem cell transplantation ( allo-HSCT ) and to explore their relations with the disease.Methods:The peripheral blood was collected from 64 patients after allo-HSCT,including 21 non-cGVHD patients,15 light grade cGVHD patients,18 mild grade cGVHD patients and 10 severe grade cGVHD patients,then CD4+CD45RA+,CD4+CD45RO+, CD8+CD45RA+and CD8+CD45RO+T lymphocyte subsets were detected by flow cytometry ( FCM).Results: Compared with the control,the percent of CD4+CD45RA+T lymphocyte in patients with light,mild and severe grade cGVHD decreased markedly (P<0.05),the percent of CD4+CD45RO+T lymphocyte increased markedly (P<0.05).But there were not obviously change in the patient with different grade cGVHD.The percent of CD8+CD45RA+,CD8+CD45RO+T lymphocyte did not change obviously.Conclusion:CD4+CD45RA+and CD4+CD45RO+may play an important role in the pathogenesis of cGVHD.

Objective To investigate the effect of bortezomib on the proliferation and apoptosis in leukemia cell line NB_4-R2 in vitro and provide some new evidences for the treatment of acute promyelocytic leukemia APL with ATRA-resistant using bortezomib. Methods NB_4-R2 cells were incubated with bortezomib at different does for 48 h. The proliferation capacity was measured by MTT assay, the morphology of cell apoptosis observed with Hoechst33342 staining by fluorescence microscopy and the percentage of apoptosis calculated by flow cytometry. The expression of apoptosis protein of cleaved (poly ADP-ribose polymerase, PARP) and Caspase-3 were determined by Western blotting. Results The proliferation of NB_4-R2 cells were obviously inhibited by bortezomib in vivo and the role of inhibition was a does-dependant manner within the scope of the bortezomib concentration from 1-5 μg /L.The incidence of inhibition was up to 74.9 % at the bortezomib concentration of 5 μg/L. Within this scope of the bortezomib concentration mentioned above, the role of inhibition of proliferation of NB_4-R2 cells mainly showed an increase of the late apoptosis, and the percentage of apoptosis was up to 78.9 %. In the meaning time, the expressions of the apoptotic protein of cleaved PARP and Caspase-3 were up-regulated in NB_4-R2 cells after treated with bortezomib by Western blotting assay. Conclusion Bortezomib can inhibit the proliferation of NB_4-R2 cells in vivo by inducing cell apoptosis.