Objective: To investigate the influence of light and heavy bite force on the mandibular movement trajectories, and the influence of bite force on virtual occlusal pre-adjustment of digital full crown. Methods: From October 2021 to March 2022, 10 postgraduate volunteers (3 males and 7 females, aged 22-26 years) were recruited from Peking University School and Hospital of Stomatology. Maxillary and mandibular digital models of the participants were obtained by intraoral scanning. Jaw relations were digitally transferred under heavy bite force and mandibular movement trajectories under light and heavy bite force were recorded by jaw motion analyser. Three mandibular markers were chosen, namely the mesial proximal contact point of the central incisor (incisal point) and the mesial buccal cusp tips of the bilateral first molars. The three-dimensional displacements of the markers under two kinds of bite force in the intercuspal position (ICP), the sagittal projection of the three-dimensional displacements in the protrusive edge-to-edge position, and the coronal projection of the three-dimensional displacements in the lateral edge-to-edge position of upper and lower posterior teeth were measured. Single-sample t-test was used to compare the three-dimensional displacements and the corresponding sagittal projection and coronal projection with 0, respectively. The left maxillary central incisor and left mandibular first molar were virtually prepared by the reverse engineering software. Then dental design software was used to design digital full crown using the copy method. The mandibular movement trajectories under light and heavy bite force were separately used to guide virtual occlusal pre-adjustment. The three-dimensional deviations (mean deviations and root mean square) between the lingual surface of the left maxillary central incisor or the occlusal surface of the left mandibular first molar and that of the natural tooth before preparation were calculated (light bite force group and heavy bite force group), and the differences between the two groups were compared by the paired t-test. Results: Under the two kinds of bite force, the three-dimensional displacements of the markers in the ICP were (0.217±0.135), (0.210±0.133) and (0.237±0.101) mm, respectively; the sagittal projection of the three-dimensional displacements of the markers in the protrusive edge-to-edge position were (0.204±0.133), (0.288±0.148) and (0.292±0.136) mm, respectively; the coronal projection of the three-dimensional displacements of the mesial buccal cusp tips of the bilateral first molars in the lateral edge-to-edge position were (0.254±0.140) and (0.295±0.190) mm, respectively. The differences between the above displacements and 0 were statistically significant (P<0.05). The results of occlusal pre-adjustment showed that the mean deviations of the lingual surface of the left maxillary central incisor in the light and heavy bite force groups were (0.215±0.036) and (0.195±0.041) mm (t=3.95, P=0.004), respectively. The mean deviations of the occlusal surface of the left mandibular first molar were (0.144±0.084) and (0.100±0.096) mm (t=0.84, P=0.036), respectively. Conclusions: Both the light and heavy bite force have an influence on the mandibular movement trajectories. Virtual occlusal pre-adjustment of prostheses with mandibular movement trajectories under heavy bite force can obtain morphology of lingual or occlusal surfaces closer to the natural teeth before preparation.
Male ; Female ; Humans ; Bite Force ; Tooth ; Mandible ; Molar ; Occlusal Adjustment

It is a basic prerequisite for the successful completion of endodontic treatment to thoroughly understand the root canal space anatomy. With the development of dental devices in dentistry, the root canal morphology of the mandibular first premolars can be presented in more detail. Before conducting root canal therapy on the mandibular first premolar with complex root canal morphology, it should be necessary to evaluate the potential difficulties and risks for making an appropriate treatment plan. The present paper reviews the research progress on the diversities of root canal morphology in mandibular first premolars in recent years, and then makes technologic recommendations based on the morphology diversities.
Humans ; Dental Pulp Cavity/diagnostic imaging* ; Bicuspid/anatomy & histology* ; Mandible ; Tooth Root/anatomy & histology* ; Root Canal Therapy

OBJECTIVE: To evaluate the decompensation effectiveness and alveolar bone remodeling of mandibular anterior teeth after preoperative orthodontic treatment in high-angle patients with skeletal class Ⅱ malocclusion using lateral cephalogram and cone-beam computed tomography (CBCT). METHODS: Thirty high-angle patients with skeletal class Ⅱ malocclusion who had received preoperative orthodontic treatment and orthognathic surgery in Peking University School and Hospital of Stomatology between Ja-nuary 2017 and August 2022 and had taken lateral cephalogram and CBCT before and after preoperative orthodontic treatment were selected. Items were measured with lateral cephalogram including: The lower central incisor (L1)-Frankfort plane angle (L1-FH), the L1-mandibular plane angle (L1-MP), the L1-nasion-supramental angle (L1-NB) and the vertical distance from the incisal edge of lower central incisor to NB line (L1-NB distance), etc. The incidence of dehiscence/fenestration and the length of dehiscence at labial side (d-La) and lingual side (d-Li) were measured using CBCT. Pearson correlation analysis was used to evaluate the correlation between the changes of d-Li of L1 and age, duration of preoperative orthodontic treatment and the cephalometric measurements before preoperative orthodontic treatment to screen out risk factors affecting the periodontal risk of preoperative orthodontic treatment in high-angle patients with skeletal class Ⅱ malocclusions. RESULTS: After preoperative orthodontic treatment, L1-FH, L1-MP, L1-NB and L1-NB distances changed by 11.56°±5.62°, -11.13°±5.53°, -11.57°±5.43° and (-4.99±1.89) mm, respectively, and the differences were all statistically significant (P < 0.05). Among the 180 measured mandibular anterior teeth, 45 cases with labial dehiscence/fenestration before preoperative orthodontic treatment (T0) had no longer labial dehiscence/fenestration after preope-rative orthodontic treatment (T1); 142 cases without lingual dehiscence/fenestration at T0 had lingual dehiscence/fenestration at T1. After preoperative orthodontic treatment, the d-La of lower lateral incisors (L2), lower canines (L3) and lower anterior teeth (L1+L2+L3) decreased by (0.95±2.22) mm, (1.20±3.23) mm and (0.68±2.50) mm, respectively, and the differences were statistically significant (P < 0.05); the d-Li of L1, L2, L3 and L1+L2+L3 increased by (4.43±1.94) mm, (4.53±2.35) mm, (3.19±2.80) mm and (4.05±2.46) mm, respectively, and the differences were statistically significant (P < 0.05). The increase of d-Li of L1 was positively correlated with L1-FH (r=0.373, P=0.042). CONCLUSION This study showed that high-angle patients with skeletal class Ⅱ ma-locclusion could achieve ideal decompensation effect of mandibular anterior teeth after preoperative orthodontic treatment with bilateral mandibular first premolars extracted, but the lingual periodontal risk of mandibular anterior teeth was increased. This risk could be correlated to L1-FH before preoperative orthodontic treatment, which should be paid more attention in the design of orthodontic-orthognathic surgical treatment.
Humans ; Malocclusion, Angle Class III ; Malocclusion, Angle Class II/surgery* ; Facial Bones ; Incisor ; Orthognathic Surgical Procedures ; Cone-Beam Computed Tomography ; Mandible

OBJECTIVE: To explore an efficient and automatic method for determining the anatomical landmarks of three-dimensional(3D) mandibular data, and to preliminarily evaluate the performance of the method. METHODS: The CT data of 40 patients with normal craniofacial morphology were collected (among them, 30 cases were used to establish the 3D mandibular average model, and 10 cases were used as test datasets to validate the performance of this method in determining the mandibular landmarks), and the 3D mandibular data were reconstructed in Mimics software. Among the 40 cases of mandibular data after the 3D reconstruction, 30 cases that were more similar to the mean value of Chinese mandibular features were selected, and the size of the mandibular data of 30 cases was normalized based on the Procrustes analysis algorithm in MATLAB software. Then, in the Geomagic Wrap software, the 3D mandibular average shape model of the above 30 mandibular data was constructed. Through symmetry processing, curvature sampling, index marking and other processing procedures, a 3D mandible structured template with 18 996 semi-landmarks and 19 indexed mandibular anatomical landmarks were constructed. The open source non-rigid registration algorithm program Meshmonk was used to match the 3D mandible template constructed above with the tested patient's 3D mandible data through non-rigid deformation, and 19 anatomical landmark positions of the patient's 3D mandible data were obtained. The accuracy of the research method was evaluated by comparing the distance error of the landmarks manually marked by stomatological experts with the landmarks marked by the method of this research. RESULTS: The method of this study was applied to the data of 10 patients with normal mandibular morphology. The average distance error of 19 landmarks was 1.42 mm, of which the minimum errors were the apex of the coracoid process [right: (1.01±0.44) mm; left: (0.56±0.14) mm] and maximum errors were the anterior edge of the lowest point of anterior ramus [right: (2.52±0.95) mm; left: (2.57±1.10) mm], the average distance error of the midline landmarks was (1.15±0.60) mm, and the average distance error of the bilateral landmarks was (1.51±0.67) mm. CONCLUSION The automatic determination method of 3D mandibular anatomical landmarks based on 3D mandibular average shape model and non-rigid registration algorithm established in this study can effectively improve the efficiency of automatic labeling of 3D mandibular data features. The automatic determination of anatomical landmarks can basically meet the needs of oral clinical applications, and the labeling effect of deformed mandible data needs to be further tested.
Humans ; Imaging, Three-Dimensional/methods* ; Mandible/diagnostic imaging* ; Software ; Algorithms ; Anatomic Landmarks/anatomy & histology*

OBJECTIVES: This study investigate the clinical and imaging features of Ewing sarcoma (ES) of the jaw. METHODS: Eight cases of pathologically diagnosed ES of the jaw from January 2010 to June 2022 were included in the study. Clinical and radiological features were retrospectively analyzed. RESULTS: Among the eight cases, the mean age at onset was 29.4 years, and the male to female ratio was 7∶1. The predilecting site was the posterior part of mandible, accounting for 75% of the cases. The lesions often exhibited early numbness of the lower lip and lymphadenopathy. The main radiographic manifestation of mandibular lesions was ill-defined radiolucency, mixed with fibrous or brush-like tumor matrix, and soft tissue mass. The maxillary ES lesions mainly presented as lytic bone destruction accompanied by adjacent soft tissue mass. Periosteal ossification was rarely seen. CONCLUSIONS The clinical and imaging characteristics of ES in the jaw are helpful for its diagnosis.
Male ; Humans ; Female ; Sarcoma, Ewing/pathology* ; Retrospective Studies ; Radiography ; Mandible/pathology* ; Lip ; Bone Neoplasms

OBJECTIVES: This study aimed to establish a new treatment of the mandibular second molars with external root resorption caused by impacted teeth to preserve the affected teeth and their vital pulps. METHODS: For mandibular second molars clinically diagnosed as external root resorption caused by impacted teeth, debridement and removal of the root at the resorption site via micro-apical surgery and direct capping of the pulp with bioactive material on the surface of the root amputation via vital pulp therapy were performed immediately after the impacted teeth were extracted. RESULTS: The external root resorption of the affected tooth was ceased. It was asymptomatic with intact crown, normal pulp, periapical alveolar bone reconstruction, normal periodontal ligament, continuous bone sclerosis, and no periapical translucency in radiographic examination at the 1-year postoperative follow-up, thus showing good prognosis. CONCLUSIONS Simultaneous combination of micro-apical surgery and vital pulp therapy after extraction of impacted teeth could successfully preserve mandibular second molars with ERR caused by impacted teeth and their vital pulps.
Humans ; Tooth, Impacted/surgery* ; Molar ; Mandible ; Dental Pulp ; Root Canal Therapy ; Root Resorption/etiology* ; Tooth Extraction

OBJECTIVES: The aim of this study was to compare the anterior and posterior occlusal plane characteristics of patients with different temporomandibular joint osseous statuses. METHODS: A total of 306 patients with initial cone beam CT (CBCT) and cephalograms were included. They were divided into three groups on the basis of their temporomandibular joint osseous status: bilateral normal (BN) group, indeterminate for osteoarthrosis (I) group, and osteoarthrosis (OA) group. The anterior and posterior occlusal planes (AOP and POP) of the different groups were compared. Then, the regression equation was established after adjusting for confounding factors, and a correlation analysis between the occlusion planes and other parameters was performed. RESULTS: SNA, SNB, FMA, SN-MP, Ar-Go, and S-Go were correlated with the occlusal planes. Relative to the BN and I groups, the FH-OP of the OA group increased by 1.67° on the average, FH-POP increased by 1.42° on the average, and FH-AOP increased by 2.05° on the average. CONCLUSIONS The occlusal planes were steeper in the patients with temporomandibular osteoarthrosis than in the patients without it, and the mandible rotated downward and backward. The height of the mandibular ramus, the mandibular body length, and the posterior face height were small. In clinical practice, attention should be given to the potential risk of temporomandibular joint osteoarthrosis in such patients. In addition, SNB, FMA, SN-MP, Ar-Go, S-Go, and occlusal planes had moderate correlations.
Humans ; Dental Occlusion ; Cephalometry ; Mandible ; Temporomandibular Joint Disorders/diagnostic imaging* ; Temporomandibular Joint/diagnostic imaging* ; Osteoarthritis/diagnostic imaging* ; Mandibular Condyle

OBJECTIVES: This study aimed to conduct a meta-analysis of the efficacy of mandibular advance clear alig-ners with traditional functional appliances as the control group. METHODS: PubMed, Web of Science, Embase, Cochrane Library, China Biomedical Abstracts Database, China Knowledge Network Database, Wanfang Database, and Weipu Database were used in this study. The two groups of researchers screened the literature and extracted data based on the inclusion and exclusion criteria established by PICOS entries, and used the ROBINS-I scale for quality evaluation. Revman 5.4 and Stata 17.0 software were used for meta-analysis. RESULTS: Nine clinical controlled trials were included in this study with a total sample size of 283 cases. No significant difference was found in SNA, SNB, ANB, Go-Pog, U1-SN, Overjet, and other aspects between the invisible group and the traditional group in the treatment of skeletal class Ⅱ ma-locclusion patients; there was a 0.90° difference in mandibular plane angle between the two groups; the growth of the mandibular ramus (Co-Go) in the traditional group was 1.10 mm more than that in the invisible group; the lip inclination of the lower teeth in the invisible group was better controlled, 1.94° less than that in the control group. CONCLUSIONS The invisible group can better control the lip inclination of the mandibular anterior teeth when guiding the mandible. Furthermore, the mandibular plane angle (MP-SN) can remain unchanged, but the growth of the mandibular ramus is not as good as the traditional group, and auxiliary measures should be taken to improve it in clinical practice.
Humans ; Malocclusion, Angle Class II/therapy* ; Mandibular Advancement ; Orthodontics, Corrective ; Orthodontic Appliances, Functional ; Mandible ; Orthodontic Appliances, Removable ; Cephalometry

Objective:To explore the perioperative airway management and treatment of newborns with micrognathia and laryngomalacia. Methods:From January to December 2022, a total of 6 newborns with micrognathia and laryngomalacia were included. Preoperative laryngoscopy revealed concomitant laryngomalacia. These micrognathia were diagnosed as Pierre Robin sequences. All patients had grade Ⅱ or higher symptoms of laryngeal obstruction and required oxygen therapy or non-invasive ventilatory support. All patients underwent simultaneous laryngomalacia surgery and mandibular distraction osteogenesis. The shortened aryepiglottic folds were ablated using a low-temperature plasma radiofrequency during the operation. Tracheal intubation was maintained for 3-5 days postoperatively. Polysomnography（PSG） and airway CT examination were performed before and 3 months after the surgery. Results:Among the 6 patients, 4 required oxygen therapy preoperatively and 2 required non-invasiveventilatory support. The mean age of patients was 40 days at surgery. The inferior alveolar nerve bundle was not damaged during the operation, and there were no signs of mandibular branch injury such as facial asymmetry after the surgery. Laryngomalacia presented as mixed type: type Ⅱ+ type Ⅲ. The maximum mandibular distraction distance was 20 mm, the minimum was 12 mm, and the mean was 16 mm. The posterior airway space increased from a preoperative average of 3.5 mm to a postoperative average of 9.5 mm. The AHI decreased from a mean of 5.65 to 0.85, and the lowest oxygen saturation increased from a mean of 78% to 95%. All patients were successfully extubated after the surgery, and symptoms of laryngeal obstruction such as hypoxia and feeding difficulties disappeared. Conclusion:Newborns with micrognathia and laryngomalacia have multi-planar airway obstruction. Simultaneous laryngomalacia surgery and mandibular distraction osteogenesis are safe and feasible, and can effectively alleviate symptoms of laryngeal obstruction such as hypoxia and feeding difficulties, while significantly improving the appearance of micrognathia.
Humans ; Infant, Newborn ; Infant ; Micrognathism/surgery* ; Laryngomalacia/surgery* ; Treatment Outcome ; Mandible/surgery* ; Airway Obstruction/surgery* ; Intubation, Intratracheal ; Laryngeal Diseases ; Osteogenesis, Distraction ; Oxygen ; Retrospective Studies

Objective:To investigate the relationship between idiopathic condylar resorption （ICR） and arch width disorder. Methods:Thirty-two patients with ICR and twenty patients without condylar resorption were enrolled according to the same inclusion criteria. They were divided into experimental group and control group. The experimental group was divided into unilateral ICR group and bilateral ICR group according to the affected side of condylar resorption, and then experimental group was divided into subgroups ICR Ⅰ, ICRⅡand ICR Ⅲ according to the degree of condylar resorption. Patients with no condylar resorption were used as a control group. The width of anterior, middle and posterior segments of dental arch on cone beam computed tomography（CBCT） was measured and the two groups of measured values were statistically analyzed. Results:Compared with the control group, the width of maxillary anterior, middle and posterior segments in ICR group was significantly reduced, and the difference was statistically significant（P<0.01）. But the width of mandibular segment was not significantly different from that in control group（P>0.05）. There was no significant difference in the width of anterior, middle and posterior dental arch between subgroups（P>0.05）. Conclusion:Almost all patients with ICR have malocclusion of maxillary and mandibular arch width, but there is no significant correlation between the malocclusion width and the severity of condylar resorption.
Humans ; Mandibular Condyle/diagnostic imaging* ; Dental Arch ; Bone Resorption ; Mandible ; Malocclusion