Objective:To explore the application value of quantitative flow ratio (QFR) in the hemodynamic evaluation of myocardial bridge and to preliminarily evaluate the correlation and related influencing factors between deformation quantitative flow ratio (D-QFR) and QFR.Methods:This is a cross-sectional study. Patients with CAG-confirmed simple myocardial bridge of the middle anterior descending coronary artery from June 2012 to June 2022 at the Air Force Medical Center were retrospectively included in this study. Systolic stenosis of mural coronary arteries (MCA) and myocardial bridge length were measured using quantitative coronary angiography. The patients were divided into mild stenosis group (<50% systolic stenosis) and moderate-to-severe stenosis group (≥50% systolic stenosis) according to the Nobel grading criteria. At different time periods (systolic and diastolic), the QFR values were measured at 3 locations (1 to 2 cm before the MCA entrance, the middle segment of the MCA, and 1 to 2 cm after the MCA exit), denoted as QFRa, QFRb, and QFRc, respectively, and the D-QFR values, incorporating vessel deformation information, were recorded. The MCA distal QFR≤0.8 in either stage was defined as an abnormal QFR value. QFR values were compared between the two groups at different locations and within each group. Factors associated with abnormal QFR values were analysed using multifactorial logistic regression. Spearman rank correlation analysis was used to examine the correlation between D-QFR values and systolic and diastolic QFR values.Multiple linear regression was used to analyse the factors associated with D-QFR.Results:A total of 83 patients were enrolled, including 58 males, aged (57.1±13.1) years. There were 48 cases in the mild stenosis group and 35 cases in the moderate-to-severe stenosis group, and the differences in systolic and diastolic QFRb and QFRc values between the two groups were statistically significant (all P<0.05). Within-group comparisons showed the values of QFRb and QFRc in the systolic phase were lower than those in the diastolic phase; QFRb and QFRc were both lower than QFRa during the same period (all P<0.05). Multifactorial logistic regression analysis showed that MCA systolic stenosis ( OR=1.225, 95% CI 1.093-1.372, P<0.001) was an influential factor for abnormal QFR. D-QFR values were positively correlated with both systolic and diastolic QFR values (correlation coefficients were 0.849 and 0.675, respectively, both P<0.01). Multiple linear regression analysis showed that D-QFR values were negatively correlated with age ( β=-0.208, P=0.029), systolic stenosis ( β=-0.500, P<0.001), and myocardial bridge length ( β=-0.211, P=0.036). Conclusions:The QFR values in middle and distal of myocardial bridge decrease. The systolic stenosis rate of myocardial bridge is an important factor affecting QFR value. D-QFR is positively correlated with both systolic and diastolic QFR values. Age, myocardial bridge systolic stenosis rate and length are factors influencing the D-QFR values.

Objective: To investigate the correlation between magnetic resonance imaging-based vertebral bone quality (VBQ) score and screw loosening after dynamic pedicle screw fixation with polyetheretherketone (PEEK) rods, and evaluate its predictive value. Methods: A retrospective analysis was conducted on the patients who underwent dynamic pedicle screw fixation with PEEK rods from March 2017 to June 2022. Data on age, sex, body mass index, hypertension, diabetes, hyperlipidemia history, long-term smoking, alcohol consumption, VBQ score, L1–4 average Hounsfield unit (HU) value, surgical fixation length, and the lowest instrumented vertebra were collected. Logistic regression analysis was employed to assess the relationship between VBQ score and pedicle screw loosening (PSL). Results: A total of 24 patients experienced PSL after surgery (20.5%). PSL group and non-PSL group showed statistical differences in age, number of fixed segments, fixation to the sacrum, L1–4 average HU value, and VBQ score (p < 0.05). The VBQ score in the PSL group was higher than that in the non-PSL group (3.56 ± 0.45 vs. 2.77 ± 0.31, p < 0.001). In logistic regression analysis, VBQ score (odds ratio, 3.425; 95% confidence interval, 1.552–8.279) were identified as independent risk factors for screw loosening. The area under the receiver operating characteristic curve for VBQ score predicting PSL was 0.819 (p < 0.05), with the optimal threshold of 3.15 (sensitivity, 83.1%; specificity, 80.5%). Conclusion The VBQ score can independently predict postoperative screw loosening in patients undergoing lumbar dynamic pedicle screw fixation with PEEK rods, and its predictive value is comparable to HU value.

Objective: To investigate the correlation between magnetic resonance imaging-based vertebral bone quality (VBQ) score and screw loosening after dynamic pedicle screw fixation with polyetheretherketone (PEEK) rods, and evaluate its predictive value. Methods: A retrospective analysis was conducted on the patients who underwent dynamic pedicle screw fixation with PEEK rods from March 2017 to June 2022. Data on age, sex, body mass index, hypertension, diabetes, hyperlipidemia history, long-term smoking, alcohol consumption, VBQ score, L1–4 average Hounsfield unit (HU) value, surgical fixation length, and the lowest instrumented vertebra were collected. Logistic regression analysis was employed to assess the relationship between VBQ score and pedicle screw loosening (PSL). Results: A total of 24 patients experienced PSL after surgery (20.5%). PSL group and non-PSL group showed statistical differences in age, number of fixed segments, fixation to the sacrum, L1–4 average HU value, and VBQ score (p < 0.05). The VBQ score in the PSL group was higher than that in the non-PSL group (3.56 ± 0.45 vs. 2.77 ± 0.31, p < 0.001). In logistic regression analysis, VBQ score (odds ratio, 3.425; 95% confidence interval, 1.552–8.279) were identified as independent risk factors for screw loosening. The area under the receiver operating characteristic curve for VBQ score predicting PSL was 0.819 (p < 0.05), with the optimal threshold of 3.15 (sensitivity, 83.1%; specificity, 80.5%). Conclusion The VBQ score can independently predict postoperative screw loosening in patients undergoing lumbar dynamic pedicle screw fixation with PEEK rods, and its predictive value is comparable to HU value.

Objective: To investigate the correlation between magnetic resonance imaging-based vertebral bone quality (VBQ) score and screw loosening after dynamic pedicle screw fixation with polyetheretherketone (PEEK) rods, and evaluate its predictive value. Methods: A retrospective analysis was conducted on the patients who underwent dynamic pedicle screw fixation with PEEK rods from March 2017 to June 2022. Data on age, sex, body mass index, hypertension, diabetes, hyperlipidemia history, long-term smoking, alcohol consumption, VBQ score, L1–4 average Hounsfield unit (HU) value, surgical fixation length, and the lowest instrumented vertebra were collected. Logistic regression analysis was employed to assess the relationship between VBQ score and pedicle screw loosening (PSL). Results: A total of 24 patients experienced PSL after surgery (20.5%). PSL group and non-PSL group showed statistical differences in age, number of fixed segments, fixation to the sacrum, L1–4 average HU value, and VBQ score (p < 0.05). The VBQ score in the PSL group was higher than that in the non-PSL group (3.56 ± 0.45 vs. 2.77 ± 0.31, p < 0.001). In logistic regression analysis, VBQ score (odds ratio, 3.425; 95% confidence interval, 1.552–8.279) were identified as independent risk factors for screw loosening. The area under the receiver operating characteristic curve for VBQ score predicting PSL was 0.819 (p < 0.05), with the optimal threshold of 3.15 (sensitivity, 83.1%; specificity, 80.5%). Conclusion The VBQ score can independently predict postoperative screw loosening in patients undergoing lumbar dynamic pedicle screw fixation with PEEK rods, and its predictive value is comparable to HU value.

Objective: To investigate the correlation between magnetic resonance imaging-based vertebral bone quality (VBQ) score and screw loosening after dynamic pedicle screw fixation with polyetheretherketone (PEEK) rods, and evaluate its predictive value. Methods: A retrospective analysis was conducted on the patients who underwent dynamic pedicle screw fixation with PEEK rods from March 2017 to June 2022. Data on age, sex, body mass index, hypertension, diabetes, hyperlipidemia history, long-term smoking, alcohol consumption, VBQ score, L1–4 average Hounsfield unit (HU) value, surgical fixation length, and the lowest instrumented vertebra were collected. Logistic regression analysis was employed to assess the relationship between VBQ score and pedicle screw loosening (PSL). Results: A total of 24 patients experienced PSL after surgery (20.5%). PSL group and non-PSL group showed statistical differences in age, number of fixed segments, fixation to the sacrum, L1–4 average HU value, and VBQ score (p < 0.05). The VBQ score in the PSL group was higher than that in the non-PSL group (3.56 ± 0.45 vs. 2.77 ± 0.31, p < 0.001). In logistic regression analysis, VBQ score (odds ratio, 3.425; 95% confidence interval, 1.552–8.279) were identified as independent risk factors for screw loosening. The area under the receiver operating characteristic curve for VBQ score predicting PSL was 0.819 (p < 0.05), with the optimal threshold of 3.15 (sensitivity, 83.1%; specificity, 80.5%). Conclusion The VBQ score can independently predict postoperative screw loosening in patients undergoing lumbar dynamic pedicle screw fixation with PEEK rods, and its predictive value is comparable to HU value.

Objective: To investigate the correlation between magnetic resonance imaging-based vertebral bone quality (VBQ) score and screw loosening after dynamic pedicle screw fixation with polyetheretherketone (PEEK) rods, and evaluate its predictive value. Methods: A retrospective analysis was conducted on the patients who underwent dynamic pedicle screw fixation with PEEK rods from March 2017 to June 2022. Data on age, sex, body mass index, hypertension, diabetes, hyperlipidemia history, long-term smoking, alcohol consumption, VBQ score, L1–4 average Hounsfield unit (HU) value, surgical fixation length, and the lowest instrumented vertebra were collected. Logistic regression analysis was employed to assess the relationship between VBQ score and pedicle screw loosening (PSL). Results: A total of 24 patients experienced PSL after surgery (20.5%). PSL group and non-PSL group showed statistical differences in age, number of fixed segments, fixation to the sacrum, L1–4 average HU value, and VBQ score (p < 0.05). The VBQ score in the PSL group was higher than that in the non-PSL group (3.56 ± 0.45 vs. 2.77 ± 0.31, p < 0.001). In logistic regression analysis, VBQ score (odds ratio, 3.425; 95% confidence interval, 1.552–8.279) were identified as independent risk factors for screw loosening. The area under the receiver operating characteristic curve for VBQ score predicting PSL was 0.819 (p < 0.05), with the optimal threshold of 3.15 (sensitivity, 83.1%; specificity, 80.5%). Conclusion The VBQ score can independently predict postoperative screw loosening in patients undergoing lumbar dynamic pedicle screw fixation with PEEK rods, and its predictive value is comparable to HU value.

In the stomatognathic system, a stable jaw position is influenced by occlusion, the temporomandibular joint and neuromuscular stability. The condylar position in the glenoid fossa is closely related to the jaw position, while no consensus has been reached on the optimum jaw position and its corresponding condylar position in oral therapy. This paper summarizes the controversial opinions regarding the selection of jaw position and the corresponding condylar position in prosthetics and orthodontics, including antero-superior, antero-inferior, and therapeutic positions. Their indications, theoretical bases and clinical applications are also included. The literature review results suggest that, the antero-superior position, in other words, centric relation, should be chosen when the patient has a stable jaw position without TMD. In cases where finding an ideal antero-superior position is difficult due to hyperplasia or deformation or disarrangement of the articular disc, the antero-inferior position is recommended to alleviate symptoms and facilitate reconstruction of the TMJ to obtain good stability. Moreover, for high-angle patients with Class Ⅱ malocclusion or for patients with mild skeletal malocclusion, camouflaged orthodontic treatment combined with antero-inferior jaw repositioning through the potential of condyle remodeling can be an alternative to orthognathic surgery and can simplify the treatment plan. While the therapeutic position is specifically proposed for coping with complicated situations related to cranio-mandibular dysfunction, such as maximal intercuspal position abnormalities or deflection, muscle and TMJ dysfunction, unstable jaw position, in which changes in the original occlusion or abnormal TMJ guidance are induced, and a new intercuspal position can be established and stabilized on the basis of occlusal support and modified guidance. The therapeutic position put aside the debate regarding condylar position, however, the specific position of the condyle has not been reported in this case. This review suggests that different jaw positions and condylar positions have different scopes of application, and their clinical selection should be based on based on whether the patient′s joints have organic changes and the stability of the jaw positions should be comprehensively considered. However, the long-term effects of oral therapy based on different jaw positions need to be further verified by controlled clinical trials in the future.

Objective : To compare the stress distribution of residual posterior root restored with a new titanium alloy post of different diameter and taper, and discuss the rational design of posterior tooth post by the three-dimensional finite element method. Methods : Mandibular second premolar image data was obtained by CBCT, and the mandibular second premolar post models with different diameter and taper were established with the help of Mimics data conversion, Geomagic Studio image processing technology and Creo/Parametric software. Then Abaqus was used to simulate the load condition of prosthesis and analyze the Von Mises stress of the cervical and apical regions. Results: With the same diameter, the influence of the different post tapers on the peak stress of the root cervical area was irregular. When the taper was the same, the peak stress of the root apex area decreased firstly and then increased as the diameter increased. When the diameter was 1 mm, the peak stress of the root cervical and apex area was the lowest. Conclusion The effect of diameter on the stress distribution of dentin is more important than that of taper. To select the reasonable diameter and taper of the post is helpful to reduce the peak stress of the root cervical and apex area.

OBJECTIVEThis study aims to evaluate the optical data of the different sites of the cobalt-chrome (Co-Cr) alloy abutments covered by four different all-ceramic crowns and the color difference between the crowns and target tab using a digital dental spectrophotometer.

METHODSTen Co-Cr alloy abutments were made and tried in four different groups of all-ceramic crowns, namely, Procera aluminia, Procera zirconia, Lava zirconia (Lava-Zir), and IPS E.max glass-ceramic lithium disilicate-reinforced monolithic. The color data of the cervical, body, and incisal sites of the samples were recorded and analyzed by dental spectrophotometer. The CIE L*, a*, b* values were again measured after veneering. The color difference between the abutments covered by all-ceramic crowns and A2 dentine shade tab was evaluated.

RESULTSThe L* and b* values of the abutments can be increased by all of the four groups of all-ceramic copings, but a* values were decreased in most groups. A statistical difference was observed among four groups. After being veneered, the L* values of all the copings declined slightly, and the values of a*, b* increased significantly. When compared with A2 dentine shade tab, the ΔE of the crowns was below 4.

CONCLUSIONFour ceramic copings were demonstrated to promote the lightness and hue of the alloy abutments effecttively. Though the colorimetric baseline of these copings was uneven, veneer porcelain can efficiently decrease the color difference between the samples and thee target.

Ceramics ; Chromium Alloys ; Cobalt ; Color ; Colorimetry ; Crowns ; Dental Materials ; Dental Porcelain ; Dental Prosthesis Design ; Humans ; Metal Ceramic Alloys ; Titanium ; Zirconium

Objective To compare the clinical effects of fiber post‐retained and metal post‐retained restorations .Methods Two hundred teeth after root canal therapy from 176 patients were divided into 2 groups randomly and each group consisted of 100 teeth .In the experimental group ,teeth were restored with fiber post‐resin core and porcelain crown ,where cast metal‐core and porcelain crown were used in the control group .The teeth were clinically examined regularly for 2 years .The data were analyzed with Chi‐square method .Results At the end of the 2‐year follow‐up ,6 fiber posts dislocated and 2 teeth showed gingival inflammation in the experimental group ,with a clinical success rate of 92% ,the loss rate of 6% .5 gingival inflammation cases ,2 periapical inflammation cases and 7 cases of root fracture occurred in the metal post group ,and the clinical success rate was 85% ,root discount rate of 7% .There was statistical significance between the two groups (P< 0 .05) .Conclusion The loss rate ogf fiber post‐retained restoration is higher than the metal post‐retained restorations ,but the root discount rate is low ,incidence of periodontal and periapical tissue similar in the two groups can be routinely used clinically instead of metal post‐retained restoration .