Background As a pillar industry in China, the manufacturing sector has a high incidence of non-fatal occupational injuries. The factors influencing non-fatal occupational injuries in this industry are closely related at various levels, including individual, equipment, environment, and management, making the analysis of these influencing factors complex. Objective To identify influencing factors of non-fatal occupational injuries among manufacturing workers, providing a basis for targeted interventions and surveillance. Methods A total of 2243 frontline workers from cable and shipbuilding enterprises were selected as study subjects to investigate the incidence of non-fatal occupational injuries and collect information at four levels: individual, equipment, management, and environment in past 12 months. Data balancing was performed using resampling, and LASSO regression was used to select factors of non-fatal occupational injuries. The influence degree and type of variables were judged based on the magnitude of the estimated coefficients of each variable, where variables with estimated coefficients > 0 are risk factors, and those <0 are protective factors. The area under the receiver operating characteristic (ROC)curve (AUC) was used to test the performance of the model, with an AUC value > 0.7 indicating good model performance. Results Among the 2243 frontline workers, males accounted for 77.7% (1742 out of 2243), with the main age range being 40-49 years old, representing 29.5% (661 out of 2243), 82.7% of the workers (1854 out of 2243) were married, and 55.6% (1248 out of 2243) had a junior middle school education level. The average monthly income for 51.0% (1144 out of 2243) of the workers was between 5000 and 6999 Chinese Yuan. The incidence of non-fatal occupational injuries among the manufacturing workers was 8.4% (189/2243) in the past 12 months. Among the 22 factors associated with the occurrence of non-fatal occupational injuries (P<0.05), 10 were individual-level factors, including gender, smoking, alcohol consumption, colleague relationships, average exercise duration, job burnout, work fatigue, musculoskeletal disorders, cardiovascular diseases, and neurological and sensory organ diseases; 3 were equipment-level factors, including equipment operability, hazardous workpieces, and safety hazards; 5 were environmental-level factors, including low temperatures, special operations, noise, workspace size, and dirty and disorderly environment; and 4 were management-level factors, including daily working hours, weekly working days, overtime, and pre-job technical training. The AUC value of the LASSO regression model was 0.704 and the final model retained a total of 10 variables. Among them, there were 7 risk factors for non-fatal occupational injuries (coefficient > 0), including safety hazards, musculoskeletal disorders, dangerous workpieces, job burnout, dirty and disorderly environment, smoking, and male gender; and 3 protective factors (coefficient < 0), including pre-job technical training, good colleague relationship, and long working days per week. Conclusion Manufacturing enterprises need to focus on the incidence of non-fatal occupational injuries and conduct targeted interventions for non-fatal occupational injuries by controlling potential safety hazards, providing pre-job technical training, reducing dangerous workpieces, rectifying working environment, and reasonably arranging working hours.

Objective To analyze the clinical features of chronic obstructive pulmonary disease (COPD) patients with heart failure (HF) in Nanjing and explore the influencing factors. Methods A total of 773 COPD inpatients were selected from January 2021 to January 2024 in Nanjing Combined Hospital of Traditional Chinese and Western Medicine, Nanjing Qixia District Hospital, Nanjing Lishui District People's Hospital, Nanjing Pukou District Hospital of Traditional Chinese Medicine and Nanjing First Hospital., and were divided into 2 groups according to the presence or absence of combined HF. The general data and medical records of the two groups were compared, the clinical characteristics of COPD patients with HF were summarized, and the influencing factors of COPD patients with HF were analyzed by multivariate logistic regression. Results Among the 242 patients (31.31%) with COPD had HF, chronic paroxysmal dyspnea was the most common first symptom, 169 patients (69.83%) had left heart failure, 63 patients (30.17%) were diagnosed as right heart failure or global heart failure , 17 patients (7.02%) had myocardial infarction. Multivariate logistic regression analysis showed that the risk of HF was 1.678 times and 1.691times higher in COPD groups ≥ 50 years old and male COPD groups than in < 50 years old and female groups, respectively; the risk of HF was 1.491 times higher in COPD groups engaged in physical work than in physical work groups; the risk of HF was 1.447 times and 1.580 times higher in COPD groups with hypertension and coronary heart disease than in COPD groups without hypertension and coronary heart disease, respectively; the risk of HF was 1.859 times higher in COPD groups smoking>400 vial/year than in COPD groups≤400 vial/ year; the risk of HF was 1.757 times higher in COPD groups with acute exacerbation frequency≥2 times/year than in COPD groups<2 times/year; the above differences were statistically significant (P<0.05). Conclusion Attention should be paid to elderly, male and heavy physical work group of COPD patients. Active treatment of hypertension and coronary heart disease, effective tobacco control and reduction of the frequency of acute exacerbation are effective ways to reduce the risk of HF in COPD patients in Nanjing.

ObjectiveTo establish the Shanghai twin birth cohort （STBC） and analyze the effects of genetic factors， shared environment， and non-shared environment interactions on birth health and growth and development of newborns. MethodsBased on the population-wide birth cohort in Shanghai， a comprehensive survey was conducted on the families with double and multiple babies born after January 1， 2015 to collect information on birth health， growth and development， and the family environment of the babies. ResultsBy December 31， 2021， a total of 7 195 pairs （14 405 cases） of twins were successfully included in the STBC survey. The average birth length of twins was 47.2 cm and average birth weight was 2 465.3 g. Heterozygous twins accounted for 69.05% and preterm babies accounted for 57.07%. The average age of the mothers of twins was 31.82 years， and the average age of the fathers was 33.87 years， with more than 80% of the parents having a college degree or above. 44.50% of the mothers used assisted reproductive technologies， 7.40% had illnesses during pregnancy， and 15.90% were exposed to passive smoking during pregnancy. During the survey period， the average monthly increase in the length of the twin infants was 2.09 cm， and the average monthly weight gain was 0.53 kg. ConclusionThe incidence of adverse outcomes such as maternal cesarean section rate， preterm birth， and low birth weight is higher in the twin birth population. Information on birth health as well as growth and development in childhood and adolescence in the twin birth population is collected based on STBC， which can provide a solid data foundation for studying children’s chronic non-communicable diseases， psychological and behavioral disorders and other complex health problems caused by the combined effects of genetics and the environment.

Transradial approach is the classical access for coronary angiography and percutaneous coronary intervention (PCI). With the increase in the number of interventional procedures, some disadvantages of the transradial approach have also been found, it is easy to lead to various complications, such as radial artery occlusion, radial nerve injury, and puncture difficulties after radial artery spasm. Therefore, some experts put forward the approach of distal radial artery approach for interventional therapy, which has the advantages of convenient positioning, easy postoperative hemostasis, less damage to the proximal radial artery and improving patients' comfort. However, there is no special distal radial artery hemostat in clinic, which limits the development of this approach to a certain extent. Therefore, based on the principles of anatomy and physics, cardiovascular physician at Jiading District District Central Hospital in Shanghai designed and invented a distal radial artery hemostatic device, which is convenient for clinical hemostasis of distal radial artery puncture, and obtained the National Utility Model Patent (patent number: ZL 2021 2 2097829.6). The hemostatic device consists of a glove body with a silicone gasket protruding towards the skin on the inner surface and a binding component. The patient's hand is inserted into the glove body, and after being fixed by the restraint component, the silicone gasket can effectively compress the location of the radial artery puncture point, and play a good hemostatic effect with less pressure, avoid the common complications of proximal radial artery hemostatic, and reduce the discomfort of the patient. Has good application value.

ObjectiveTo use the maternal morbidity WOICE Tool（Chinese version）to investigate the maternal morbidity in Shanghai， and to examine the current situation and associated factors of adverse symptoms and impaired functioning in the third trimester and postpartum period. MethodsPregnant women who made their initial visit and established a medical record at a tertiary obstetrics and gynecology hospital in Shanghai from March to August 2021 were recruited and a baseline survey was completed. The prevalence of maternal morbidity was surveyed in the third trimester and first 6 weeks postpartum. ResultsSelf-reported adverse physical symptoms were observed in 89.8% of women in the third trimester and 86.1% in first 6 weeks postpartum. The prevalence rates of anxiety and depression were 4.1% and 6.2% in the third trimester， and 6.2% and 7.5% in first 6 weeks postpartum， respectively. The proportions of women reporting impaired functioning were 80.3% in the third trimester and 64.1% in first 6 weeks postpartum， respectively. Physical symptoms were associated with parity， education， the newborn’s health status， and risk of experiencing violence. Psychological symptoms were associated with age， household responsibilities， employment status， the newborn’s health status， pre-pregnancy body mass index （BMI）， and risk of experiencing violence. Functionality was associated with the type of registered residence， education level， household responsibilities， and risk of experiencing violence. ConclusionThe physical health status of pregnant and postpartum women in Shanghai is better than that in the middle-income regions abroad， with anxiety and depression at average levels compared to national statistics in China. Physical， psychological， and functional status are affected by multiple factors including personal， health， family， and work conditions. Preventive measures should be taken from various perspectives to mitigate adverse symptoms and impaired functioning， and to improve the positive experience of pregnancy and childbirth.

By reviewing the research history on quality comparison between wild and cultivated Chinese crude drugs， this paper systematically combed the relevant research reports since the 1950s， and summarized and analyzed the results of existing comparative studies， and found that the existing comparative research on the quality of wild and cultivated Chinese crude drugs were mainly focused on several aspects， including characteristics， microstructures， chemical compositions， pharmacodynamic effects， and genetic diversity. Among these， comparative studies of chemical compositions have been the dominant approach， with a particular emphasis on comparing the contents of index components. However， research on pharmacodynamic effects remained relatively limited. Due to various factors such as sample quantity， sample origin， growth period and cultivation methods， the differences in quality between wild and cultivated Chinese crude drugs vary significantly. In general， most wild Chinese crude drugs exhibited higher quality than cultivated products， with significant differences in their characteristics. The contents and proportions of some chemical components underwent noticeable changes， particularly with a marked increase in the proportion of primary metabolites after cultivation. The quality of cultivated Chinese crude drugs is closely related to the cultivation practices employed. Chinese crude drugs produced through wild nurturing， simulated wild planting， ecological cultivation， and other similar methods demonstrate quality levels comparable to those of wild Chinese crude drugs. Based on the analysis results， it is recommended to explicitly specify the cultivation practices and cultivation period of cultivated Chinese crude drugs in comparative studies of the quality between wild and cultivated Chinese crude drugs. Multiple technical approaches， including characteristics， microscopy， non-targeted metabolomics combined with quantitative analysis of differential components， and bioefficacy evaluation， should be employed to comprehensively assess the quality disparities between wild and cultivated Chinese crude drugs. Moreover， research efforts should be intensified to investigate the changes in pharmacodynamic effects resulting from differences in plant cell wall composition， primary metabolites， and secondary metabolites， in order to guide the production of high-quality Chinese crude drugs.

ObjectiveBased on the traditional quality evaluation methods summarized in previous dynasties， this paper systematically contrasted cultivated Astragali Radix（CA） and wild-simulated Astragali Radix（WA） from the aspects of character， microstructure and chemical composition by modern technological means. MethodThe collected CA and WA were compared in characters and microscopic characteristics in cross section， and comparative analysis were performed on the contents of cellulose， extracts， carbohydrate， total flavonoids， total saponins， etc. Then ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometer（UPLC-Q-TOF-MS） and desorption electrospray ionization mass spectrometry imaging（DESI-MSI） were used to comparatively analyze the secondary metabolites and their spatial distributions in the xylem and phloem of CA and WA. ResultIn terms of characters， the characters and sectional features of WA was consistent with the characteristics of high-quality Astragali Radix， while the CA was quite different from the traditional high-quality Astragali Radix. In terms of microscopy， the phellem layer of CA was thin， and the section fissures were mostly distributed through the cambium in a long strip shape without obvious growth ring characteristics. The cork layer of WA was thick， and the cracks in the section were distributed in the center of the xylem and the outer edge of the phloem in an irregular cavity shape. The cambium was tight without cracks， and had obvious characteristics of a growth ring. In terms of chemical composition， the contents of water-soluble extract， 80% ethanol extract and sucrose of CA was significantly higher than those of WA， while the contents of total saponins， lignin and hemicellulose were significantly lower than those of WA. And the contents of 100% ethanol extract， total polysaccharides and total flavonoids in both of them were generally similar， but slightly higher in WA. The contents of 2 kinds of monoacyl-substituted flavonoid glycosides in the xylem of WA was significantly higher than those of CA， while the contents of 2 kinds of flavonoid aglycones and one flavonoid glycoside were on the contrary. The contents of 7 saponins in phloem of WA were significantly higher than those of CA. ConclusionThere are significant differences between CA and WA in characters， microstructure and chemical components， in which CA has a fast growth rate and a short planting period， and the primary metabolites such as water-soluble extracts and sucrose are more enriched， which is the reason for its firm texture and sweetness being significantly higher than those of WA. However， the contents of lignin， hemicellulose and some secondary metabolites in WA are significantly higher than those in the CA， which are close to the traditional description of characters and quality. Based on the results of this study， it is suggested to strengthen the production of WA， improve the supply capacity of WA， and gradually upgrade the current standard. It is recommended to increase the contents of monoacyl-substituted flavonoid glycosides， total saponins and other indicators that can characterize different production methods， so as to guide the high-quality production of Astragali Radix.

ObjectiveBased on the experience of traditional quality evaluation， the quality of Atractylodis Macrocephalae Rhizoma（AMR） with different production methods such as direct seeding， transplanting after seedling raising， topping and non-topping， and difference in growth years was compared. MethodVernier caliper was used to measure the trait data of AMR in different production methods. Paraffin sections of AMR with different production methods were made by saffron solid green staining， and the microstructure was observed. The contents of water-soluble and alcohol-soluble extracts in AMR with different production methods were determined according to the 2020 edition of Chinese Pharmacopoeia. The content of water-soluble total polysaccharides in AMR with different production methods was detected by sulfuric acid-anthrone method. Fiber analyzer was used to detect the content of fiber components in AMR with different production methods. The contents of monosaccharides， oligosaccharides and some secondary metabolites in AMR with different production methods were detected by ultra performance liquid chromatography（UPLC）， and the differences of chemical components were compared by multivariate statistical analysis methods such as principal component analysis（PCA） and partial least squares-discriminant analysis（PLS-DA）. ResultIn terms of traits， the 3-year-old AMR with direct seeding and without topping was close to the high-quality AMR with "phoenix-head and crane-neck， strong sweetness and clear aroma" recorded in ancient materia medica， followed by the 3-year-old AMR with topping after transplanting， while the 2-year-old AMR with topping after transplanting with high market circulation rate was generally fat and strong with mild odor. In the microscopic aspect， the arrangement of xylem vessels and fiber bundles in the 3-year-old samples formed two obvious rings. Compared with the 2-year-old samples cultivated in Bozhou and Zhejiang， the 3-year-old samples without topping after transplanting had more wood fibers. In terms of chemical composition， the contents of 70% ethanol extract， fructose， glucose， sucrose， 1-kestose， atractylenolide Ⅰ， chlorogenic acid， neochlorogenic acid， cryptochlorogenic acid and other components in 3-year-old AMR with direct seeding and without topping were significantly higher than those in the other three samples（P<0.05）. The contents of cellulose， 70% ethanol extract， sucrose， atractylenolide Ⅰ， atractylone and other components in 3-year-old AMR with topping after transplanting were significantly higher than those in the 2-year-old AMR with high market circulation rate（P<0.05）， while the contents of water-soluble extract and water-soluble total polysaccharides in 2-year-old samples with topping after transplanting were significantly higher than those in the 3-year-old AMR with topping after transplanting， direct seeding and without topping（P<0.05）. ConclusionUnder the current mainstream production mode， too much manual intervention makes AMR heavily enriched in polysaccharides and increased the yield， but the accumulation of sweet substances， fragrant substances and fiber substances is insufficient， which affects its quality. The current quality standard of AMR has some shortcomings in guiding the high quality production of it， it is suggested to revise the quality standard of AMR， supplement the quantitative analysis of secondary metabolites， and strengthen the production of imitation wild AMR.

ObjectiveTo investigate the current status of health literacy among type 2 diabetes mellitus patients in Shanghai communities, to analyze its correlation with glycemic and lipid metabolic indicators and quality of life (QoL), and to provide an evidence for the development of effective intervention measures. MethodsA follow⁃up survey was conducted among diabetic patients diagnosed at hospitals above the secondary level from March to June, 2023, who were part of a diabetes cohort study jointly established by Songnan Community in Baoshan District and the Shanghai Institute of Endocrinology. Patients were assessed using a simplified evaluation form for diabetes-related health literacy and a QoL scale, and metabolic indicators such as blood glucose and blood lipids were measured. Pearson correlation coefficients were employed to assess the relationship between health literacy levels and metabolic indicators as well as QoL. Logistic regression models were used to estimate the odds ratios (OR) and 95% confidence intervals (CI) for the associations between patients’ health literacy levels, metabolic status, and QoL. ResultsAmong the 932 diabetic patients surveyed, the health literacy level was low, with an average score of (65.2±13.4) points of which (62.6±13.8) points for males and (67.9±12.5) points for females. The average QoL score was (44.1±9.2) points of which (44.0±9.5) points for males and (44.2±8.9) points for females. The achievement rates of HbA1c, total cholesterol (TC), and triglycerides (TG) were 51.6%, 30.3%, and 64.8%, respectively. The TC achievement rate among male patients (37.6%) was significantly higher than that among females (22.8%). Significant differences in HbA1c achievement rates were observed across age groups, education levels, disease durations, and BMI levels (P<0.05). Similarly, significant differences were found in FPG achievement rates across different age groups, annual household incomes, disease durations, and family histories (P<0.05). No statistically significant differences were noted in TG and HDL-C achievement rates across all variables (P>0.05). However, LDL-C achievement rates were significantly higher in patients without complications compared to those with complications (P<0.05). Health literacy showed a significant negative correlation with psychological dimension, treatment dimension, and QoL scores (r=-0.14, P<0.05). After adjusting for potential confounding factors, a significant association was found between patients’ health literacy levels and QoL, but not with metabolic indicators. ConclusionThere is a significant correlation between health literacy levels and QoL among diabetic patients in community settings. Further exploration is needed to identify factors influencing patients’ QoL and glycemic and lipid metabolic indicators.

Objective To evaluate the predictive value of global longitudinal strain(GLS)measured by cardiac magnetic resonance(CMR)feature-tracking technique for left ventricular remodeling(LVR)after percutaneous coronary intervention(PCI)in patients with acute ST-segment elevation myocardial infarction(STEMI).Methods A total of 403 patients undergoing PCI for acute STEMI were prospectively recruited from multiple centers in China.CMR examinations were performed one week(7±2 days)and 6 months after myocardial infarction to obtain GLS,global radial strain(GRS),global circumferential strain(GCS),ejection fraction(LVEF)and infarct size(IS).The primary endpoint was LVR,defined as an increase of left ventricle end-diastolic volume by≥20%or an increase of left ventricle end-systolic volume by≥15%from the baseline determined by CMR at 6 months.Logistic regression analysis was performed to evaluate the predictive value of CMR parameters for LVR.Results LVR occurred in 101 of the patients at 6 months after myocardial infarction.Compared with those without LVR(n=302),the patients in LVR group exhibited significantly higher GLS and GCS(P<0.001)and lower GRS and LVEF(P<0.001).Logistic regression analysis indicated that both GLS(OR=1.387,95%CI:1.223-1.573;P<0.001)and LVEF(OR=0.951,95%CI:0.914-0.990;P=0.015)were independent predictors of LVR.ROC curve analysis showed that at the optimal cutoff value of-10.6%,GLS had a sensitivity of 74.3%and a specificity of 71.9%for predicting LVR.The AUC of GLS was similar to that of LVEF for predicting LVR(P=0.146),but was significantly greater than those of other parameters such as GCS,GRS and IS(P<0.05);the AUC of LVEF did not differ significantly from those of the other parameters(P>0.05).Conclusion In patients receiving PCI for STEMI,GLS measured by CMR is a significant predictor of LVR occurrence with better performance than GRS,GCS,IS and LVEF.